-/* hms30c7202_can.c - Hynix HMS30c7202 ARM device specific code
- * Linux CAN-bus device driver.
- * Written by Sebastian Stolzenberg email:stolzi@sebastian-stolzenberg.de
- * Based on code from Arnaud Westenberg email:arnaud@wanadoo.nl
- * and Ake Hedman, eurosource, akhe@eurosource.se
- * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
- * email:pisa@cmp.felk.cvut.cz
- * This software is released under the GPL-License.
- * Version lincan-0.3 17 Jun 2004
- */
+/**************************************************************************/
+/* File: hms30c7202_can.c - Hynix HMS30c7202 ARM integrated C_CAN handling*/
+/* */
+/* LinCAN - (Not only) Linux CAN bus driver */
+/* Copyright (C) 2002-2009 DCE FEE CTU Prague <http://dce.felk.cvut.cz> */
+/* Copyright (C) 2002-2009 Pavel Pisa <pisa@cmp.felk.cvut.cz> */
+/* Copyright (C) 2004 Sebastian Stolzenberg <stolzi@sebastian-stolzenberg.de> */
+/* Funded by OCERA and FRESCOR IST projects */
+/* Based on CAN driver code by Arnaud Westenberg <arnaud@wanadoo.nl> */
+/* and Ake Hedman, eurosource <akhe@eurosource.se> */
+/* */
+/* LinCAN is free software; you can redistribute it and/or modify it */
+/* under terms of the GNU General Public License as published by the */
+/* Free Software Foundation; either version 2, or (at your option) any */
+/* later version. LinCAN is distributed in the hope that it will be */
+/* useful, but WITHOUT ANY WARRANTY; without even the implied warranty */
+/* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU */
+/* General Public License for more details. You should have received a */
+/* copy of the GNU General Public License along with LinCAN; see file */
+/* COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, */
+/* Cambridge, MA 02139, USA. */
+/* */
+/* To allow use of LinCAN in the compact embedded systems firmware */
+/* and RT-executives (RTEMS for example), main authors agree with next */
+/* special exception: */
+/* */
+/* Including LinCAN header files in a file, instantiating LinCAN generics */
+/* or templates, or linking other files with LinCAN objects to produce */
+/* an application image/executable, does not by itself cause the */
+/* resulting application image/executable to be covered by */
+/* the GNU General Public License. */
+/* This exception does not however invalidate any other reasons */
+/* why the executable file might be covered by the GNU Public License. */
+/* Publication of enhanced or derived LinCAN files is required although. */
+/**************************************************************************/
#include <linux/delay.h>
(unsigned long)candev->io_addr );
}
- if (!( candev->dev_base_addr = (long)ioremap( candev->io_addr, IO_RANGE ))) {
+ if (!( candev->dev_base_addr = ioremap( candev->io_addr, IO_RANGE ))) {
DEBUGMSG( "Failed to map IO-memory: 0x%lx - 0x%lx, mapped to 0x%lx\n",
(unsigned long)candev->io_addr,
(unsigned long)candev->io_addr + IO_RANGE - 1,
candev->chip[0]->chipspecops->stop_chip(candev->chip[0]);
// release I/O memory mapping
- iounmap((void*)candev->dev_base_addr);
+ iounmap(candev->dev_base_addr);
// Release the memory region
can_release_mem_region(candev->io_addr, IO_RANGE);
{
int i=0;
int enableTest=0, disableTest=0;
- struct chip_t *pchip = candev->chip[0];
+ struct canchip_t *pchip = candev->chip[0];
enableTest = pchip->chipspecops->enable_configuration(pchip);
disableTest = pchip->chipspecops->disable_configuration(pchip);
* File: src/template.c
*/
int hms30c7202_init_hw_data(struct candevice_t *candev)
-/*( struct chip_t *pchip, u16 chip_nr, u16 startminor, u32 baseaddr, u8 irq )*/
+/*( struct canchip_t *pchip, u16 chip_nr, u16 startminor, u32 baseaddr, u8 irq )*/
{
// u32 intCntrVAddr = 0;
- u32 gpioVAddr = 0;
+ can_ioptr_t gpioVAddr = 0;
u32 tempReg = 0;
u32 baseaddr=candev->io_addr;
- // if ( (!( intCntrVAddr = (u32)ioremap( 0x80024000, 0xCD ) ))
- // & (! ( gpioVAddr = (u32)ioremap( 0x80023000, 0xAD ) ))) {
+ // if ( (!( intCntrVAddr = ioremap( 0x80024000, 0xCD ) ))
+ // & (! ( gpioVAddr = ioremap( 0x80023000, 0xAD ) ))) {
// DEBUGMSG("Failed to map Int and GPIO memory\n");
// return -EIO;
// }
- if ( ! ( gpioVAddr = (u32)ioremap( 0x80023000, 0xAD ) )) {
+ if ( ! ( gpioVAddr = ioremap( 0x80023000, 0xAD ) )) {
DEBUGMSG("Failed to map GPIO memory\n");
return -EIO;
} else {
}
if (baseaddr == 0x8002f000) {
- // tempReg = readl(intCntrVAddr);
+ // tempReg = can_readl(intCntrVAddr);
// DEBUGMSG("Read Interrupt Enable Register : 0x%.4lx\n",(long)tempReg);
// DEBUGMSG("Trying to activate CAN0 Interrupt (Bit 18)\n");
- // writel((tempReg | (1<<18)), intCntrVAddr);
- // tempReg = readl(intCntrVAddr);
+ // can_writel((tempReg | (1<<18)), intCntrVAddr);
+ // tempReg = can_readl(intCntrVAddr);
// DEBUGMSG("Read changed Interrupt Enable Register : 0x%.4lx\n",(long)tempReg);
- tempReg = readl(gpioVAddr + 0x5C);
+ tempReg = can_readl(gpioVAddr + 0x5C);
DEBUGMSG("Read GPIO-C Enable Register : 0x%.4lx\n",(long)tempReg);
DEBUGMSG("Trying to activate CAN0 (Bit 1 = 0 for CANTx0, Bit 2 = 0 for CANRx0,)\n");
- writel(tempReg & ~0x6, gpioVAddr + 0x5C);
- tempReg = readl(gpioVAddr + 0x5C);
+ can_writel(tempReg & ~0x6, gpioVAddr + 0x5C);
+ tempReg = can_readl(gpioVAddr + 0x5C);
DEBUGMSG("Read changed GPIO-C Enable Register : 0x%.4lx\n",(long)tempReg);
- tempReg = readl(gpioVAddr + 0x44);
+ tempReg = can_readl(gpioVAddr + 0x44);
DEBUGMSG("Read GPIO-C Direction Register : 0x%.4lx\n",(long)tempReg);
DEBUGMSG("Trying to set CAN0 directions (Bit 1 = 0 for CANTx0 as OUT, Bit 2 = 1 for CANRx0 as IN,)\n");
- writel((tempReg & ~0x2) | 0x4, gpioVAddr + 0x44);
- tempReg = readl(gpioVAddr + 0x44);
+ can_writel((tempReg & ~0x2) | 0x4, gpioVAddr + 0x44);
+ tempReg = can_readl(gpioVAddr + 0x44);
DEBUGMSG("Read changed GPIO-C Direction Register : 0x%.4lx\n",(long)tempReg);
}
else if (baseaddr == 0x80030000) {
- // tempReg = readl(intCntrVAddr);
- // writel((tempReg | (1<<19)), intCntrVAddr);
- tempReg = readl(gpioVAddr + 0x9C);
+ // tempReg = can_readl(intCntrVAddr);
+ // can_writel((tempReg | (1<<19)), intCntrVAddr);
+ tempReg = can_readl(gpioVAddr + 0x9C);
DEBUGMSG("Read GPIO-E Enable Register : 0x%.8lx\n",(long)tempReg);
DEBUGMSG("Trying to activate CAN1 (Bit 22 = 0 for CANRx1, Bit 23 = 0 for CANTx1,)\n");
- writel(tempReg & 0xFF3FFFFF, gpioVAddr + 0x9C);
- tempReg = readl(gpioVAddr + 0x9C);
+ can_writel(tempReg & 0xFF3FFFFF, gpioVAddr + 0x9C);
+ tempReg = can_readl(gpioVAddr + 0x9C);
DEBUGMSG("Read changed GPIO-E Enable Register : 0x%.8lx\n",(long)tempReg);
- tempReg = readl(gpioVAddr + 0x84);
+ tempReg = can_readl(gpioVAddr + 0x84);
DEBUGMSG("Read GPIO-E Direction Register : 0x%.8lx\n",(long)tempReg);
DEBUGMSG("Trying to set CAN1 directions (Bit 22 = 1 for CANRx1 as IN, Bit 23 = 0 for CANTx1 as OUT,)\n");
- writel((tempReg & ~(1<<23)) | 1<<22, gpioVAddr + 0x84);
- tempReg = readl(gpioVAddr + 0x84);
+ can_writel((tempReg & ~(1<<23)) | 1<<22, gpioVAddr + 0x84);
+ tempReg = can_readl(gpioVAddr + 0x84);
DEBUGMSG("Read changed GPIO-E Direction Register : 0x%.8lx\n",(long)tempReg);
}
//DEBUGMSG("Current Interrupt Status Register (ISR): 0x%4.4lx\n",
- // (long)readl(intCntrVAddr + 4));
+ // (long)can_readl(intCntrVAddr + 4));
//DEBUGMSG("Current Interrupt ID: %d\n",
- // (int)(readl(intCntrVAddr + 0x90) & 0xF));
+ // (int)(can_readl(intCntrVAddr + 0x90) & 0xF));
// iounmap( (void*)intCntrVAddr);
- iounmap( (void*)gpioVAddr );
+ iounmap( gpioVAddr );
// DEBUGMSG( "Unmapped Interrupt Controller IO-memory: 0x%lx\n",
// (unsigned long)intCntrVAddr);
DEBUGMSG( "Unmapped GPIO IO-memory: 0x%lx\n",
candev->chip[chipnr]->chip_base_addr=candev->io_addr;
- candev->chip[chipnr]->clock = 16000000;
+ candev->chip[chipnr]->clock = 16000000/2;
/*candev->chip[chipnr]->int_clk_reg = 0x0;
candev->chip[chipnr]->int_bus_reg = 0x0;
* Return Value: The function always returns zero
* File: src/template.c
*/
-int hms30c7202_init_obj_data(struct chip_t *chip, int objnr)
+int hms30c7202_init_obj_data(struct canchip_t *chip, int objnr)
{
DEBUGMSG("(c%d)calling hms30c7202_init_obj_data( ...)\n", chip->chip_idx);
* @address: memory address to write to
*
* The function hms30c7202_write_register() is used to write to hardware registers
- * on the CAN chip. You should only have to edit this function if your hardware
- * uses some specific write process.
+ * on the CAN chip. The registers are mapped on 32 bit bus on hms30c7202
+ * and thus registers span is twice as one defined by C_CAN manual and defines.
+ * This function compensates this difference.
* Return Value: The function does not return a value
* File: src/template.c
*/
-void hms30c7202_write_register(unsigned data, unsigned long address)
+void hms30c7202_write_register(unsigned data, can_ioptr_t address)
{
+ unsigned long addr=can_ioptr2ulong(address);
int i;
//unsigned long usecs = 1;
+
+ address = can_ulong2ioptr(((addr & C_CAN_REGOFFS_MASK) << 1) |
+ (addr & ~C_CAN_REGOFFS_MASK));
//DEBUGMSG("Trying to write 0x%u16x to address 0x%lx\n",data,address);
- writew(data,address);
+ can_writew(data,address);
//udelay( usecs );
for (i=0; i<5; i++);
}
* @address: memory address to read from
*
* The function hms30c7202_read_register() is used to read from hardware registers
- * on the CAN chip. You should only have to edit this function if your hardware
- * uses some specific read process.
+ * on the CAN chip. The registers are mapped on 32 bit bus on hms30c7202
+ * and thus registers span is twice as one defined by C_CAN manual and defines.
+ * This function compensates this difference.
* Return Value: The function returns the value stored in @address
* File: src/template.c
*/
-unsigned hms30c7202_read_register(unsigned long address)
+unsigned hms30c7202_read_register(can_ioptr_t address)
{
+ unsigned long addr=can_ioptr2ulong(address);
u16 value, i;
+ address = can_ulong2ioptr(((addr & C_CAN_REGOFFS_MASK) << 1) |
+ (addr & ~C_CAN_REGOFFS_MASK));
+
//DEBUGMSG("Trying to read from address 0x%lx :",address);
- value = readw(address);
+ value = can_readw(address);
//udelay( usecs );
for (i=0;i<5;i++);
- value = readw(address);
+ value = can_readw(address);
//udelay( usecs );
for (i=0;i<5;i++);
projects / lincan.git / blobdiff