#include "../include/i82527.h"
#include "../include/sja1000p.h"
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) /* may need correction */
- #ifndef request_mem_region
- #define request_mem_region(start,size,dev) (1)
- #define release_mem_region(start,size)
- #endif /*request_mem_region*/
-#endif /* 2.4.0 */
-
/*
* IO_RANGE is the io-memory range that gets reserved, please adjust according
* your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
#define IO_RANGE 0x400
/**
- * template_request_io: - reserve io memory
- * @io_addr: The reserved memory starts at @io_addr, wich is the module
- * parameter @io.
+ * template_request_io: - reserve io or memory range for can board
+ * @candev: pointer to candevice/board which asks for io. Field @io_addr
+ * of @candev is used in most cases to define start of the range
*
* The function template_request_io() is used to reserve the io-memory. If your
* hardware uses a dedicated memory range as hardware control registers you
int pcm3680_request_io(struct candevice_t *candev)
{
unsigned long remap_addr;
- if (!request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME " - pcm3680")) {
+ if (!can_request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME " - pcm3680")) {
CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
return -ENODEV;
}
if ( !( remap_addr = (long) ioremap( candev->io_addr, IO_RANGE ) ) ) {
CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
- release_mem_region(candev->io_addr,IO_RANGE);
+ can_release_mem_region(candev->io_addr,IO_RANGE);
return -ENODEV;
}
}
/**
- * template_release_io - free reserved io-memory
- * @io_addr: Start of the memory range to be released.
+ * template_elease_io - free reserved io memory range
+ * @candev: pointer to candevice/board which releases io
*
* The function template_release_io() is used to free reserved io-memory.
* In case you have reserved more io memory, don't forget to free it here.
int pcm3680_release_io(struct candevice_t *candev)
{
iounmap((void*)candev->dev_base_addr);
- release_mem_region(candev->io_addr,IO_RANGE);
+ can_release_mem_region(candev->io_addr,IO_RANGE);
return 0;
}
/**
* template_reset - hardware reset routine
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
*
* The function template_reset() is used to give a hardware reset. This is
* rather hardware specific so I haven't included example code. Don't forget to
#define NR_SJA1000 2
/**
- * template_init_hw_data - Initialze hardware cards
- * @card: Number of the hardware card.
+ * template_init_hw_data - Initialize hardware cards
+ * @candev: Pointer to candevice/board structure
*
* The function template_init_hw_data() is used to initialize the hardware
* structure containing information about the installed CAN-board.
#define CHIP_TYPE "sja1000p"
/**
* template_init_chip_data - Initialize chips
- * @card: Number of the hardware card
+ * @candev: Pointer to candevice/board structure
* @chipnr: Number of the CAN chip on the hardware card
*
* The function template_init_chip_data() is used to initialize the hardware
/**
* template_init_obj_data - Initialize message buffers
- * @chipnr: Number of the CAN chip
+ * @chip: Pointer to chip specific structure
* @objnr: Number of the message buffer
*
* The function template_init_obj_data() is used to initialize the hardware
/**
* template_program_irq - program interrupts
- * @card: Number of the hardware card.
+ * @candev: Pointer to candevice/board structure
*
* The function template_program_irq() is used for hardware that uses
* programmable interrupts. If your hardware doesn't use programmable interrupts