+/**************************************************************************/
+/* File: main.c - setup and main loop of USB<->CAN converter */
+/* */
+/* LinCAN - (Not only) Linux CAN bus driver */
+/* Copyright (C) 2002-2011 DCE FEE CTU Prague <http://dce.felk.cvut.cz> */
+/* Copyright (C) 2008 Jan Kriz email:johen@post.cz */
+/* */
+/* LinCAN is free software; you can redistribute it and/or modify it */
+/* under terms of the GNU General Public License as published by the */
+/* Free Software Foundation; either version 2, or (at your option) any */
+/* later version. LinCAN is distributed in the hope that it will be */
+/* useful, but WITHOUT ANY WARRANTY; without even the implied warranty */
+/* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU */
+/* General Public License for more details. You should have received a */
+/* copy of the GNU General Public License along with LinCAN; see file */
+/* COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, */
+/* Cambridge, MA 02139, USA. */
+/* */
+/* To allow use of LinCAN in the compact embedded systems firmware */
+/* and RT-executives (RTEMS for example), main authors agree with next */
+/* special exception: */
+/* */
+/* Including LinCAN header files in a file, instantiating LinCAN generics */
+/* or templates, or linking other files with LinCAN objects to produce */
+/* an application image/executable, does not by itself cause the */
+/* resulting application image/executable to be covered by */
+/* the GNU General Public License. */
+/* This exception does not however invalidate any other reasons */
+/* why the executable file might be covered by the GNU Public License. */
+/* Publication of enhanced or derived LinCAN files is required although. */
+/**************************************************************************/
+
#include <stdio.h>
#include <string.h>
#include <cpu_def.h>
}
}
+/***********************************************************************
+ * Microsecond delay routine
+ ***********************************************************************/
+
+void udelay(long time)
+{
+ volatile long ticks=(time * CCLK) / 2000000;
+ do{
+ ticks--;
+ } while(ticks>0);
+}
+
+
/***********************************************************************
* Routine for visible LED blinking (on USB transmission)
***********************************************************************/
chip->chipspecops->irq_handler(0,chip);
if (usb_device.ep_events & MASK_EP1RX) { //EP1RX - data waiting to receive
- uint8_t val;
if (canque_get_inslot(qends, &qedge, &slot, 0)>=0){ //Free slot obtained
size=usb_udev_read_endpoint(&eps[0],ep1_rx_buff,16);
if (size==16){
/* if (size==2){
- if (((*data)&CAN_OP_MASK)==CAN_OP_READ){ // Get data from CAN device and return to caller
- can_read((*data) & 0x7F,&val);
+ uint8_t val;
+ if ((data[0]&CAN_OP_MASK)==CAN_OP_READ){ // Get data from CAN device and return to caller
+ val = can_read(data[0] & ~CAN_OP_MASK);
*(data+1)=val;
usb_udev_write_endpoint(&eps[1],(unsigned char *)data,size);
timer_rx_off=50; //rosviceni diody pri prijmu
CLR_OUT_PIN(LED_PORT,LED2_BIT);
usb_can_send=0;
}
- if (((*data)&CAN_OP_MASK)==CAN_OP_WRITE){ // Save data to CAN device
- can_write((*data)&(~CAN_OP_MASK),data+1);
+ if ((data[0]&CAN_OP_MASK)==CAN_OP_WRITE){ // Save data to CAN device
+ can_write(data[1], data[0] & ~CAN_OP_MASK);
timer_tx_off=50; //rozsviceni diod pri vysilani
CLR_OUT_PIN(LED_PORT,LED1_BIT);
}