'git checkout' [-q] [-f] [-m] [<branch>]
'git checkout' [-q] [-f] [-m] [-b <new_branch>] [<start_point>]
'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>...
+ 'git checkout' --patch [<tree-ish>] [--] [<paths>...]
DESCRIPTION
-----------
branch`. As a convenience, --track without `-b` implies branch
creation; see the description of --track below.
- When <paths> are given, this command does *not* switch
+ When <paths> or --patch are given, this command does *not* switch
branches. It updates the named paths in the working tree from
the index file, or from a named <tree-ish> (most often a commit). In
this case, the `-b` and `--track` options are meaningless and giving
OPTIONS
-------
-q::
+--quiet::
Quiet, suppress feedback messages.
-f::
+--force::
When switching branches, proceed even if the index or the
working tree differs from HEAD. This is used to throw away
local changes.
"merge" (default) and "diff3" (in addition to what is shown by
"merge" style, shows the original contents).
+ -p::
+ --patch::
+ Interactively select hunks in the difference between the
+ <tree-ish> (or the index, if unspecified) and the working
+ tree. The chosen hunks are then applied in reverse to the
+ working tree (and if a <tree-ish> was specified, the index).
+ +
+ This means that you can use `git checkout -p` to selectively discard
+ edits from your current working tree.
+
<branch>::
Branch to checkout; if it refers to a branch (i.e., a name that,
when prepended with "refs/heads/", is a valid ref), then that
'git stash' drop [-q|--quiet] [<stash>]
'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>]
'git stash' branch <branchname> [<stash>]
- 'git stash' [save [--keep-index] [-q|--quiet] [<message>]]
+ 'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]]
'git stash' clear
'git stash' create
OPTIONS
-------
- save [--keep-index] [-q|--quiet] [<message>]::
+ save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]::
Save your local modifications to a new 'stash', and run `git reset
- --hard` to revert them. This is the default action when no
- subcommand is given. The <message> part is optional and gives
- the description along with the stashed state.
+ --hard` to revert them. The <message> part is optional and gives
+ the description along with the stashed state. For quickly making
+ a snapshot, you can omit _both_ "save" and <message>, but giving
+ only <message> does not trigger this action to prevent a misspelled
+ subcommand from making an unwanted stash.
+
If the `--keep-index` option is used, all changes already added to the
index are left intact.
+ +
+ With `--patch`, you can interactively select hunks from in the diff
+ between HEAD and the working tree to be stashed. The stash entry is
+ constructed such that its index state is the same as the index state
+ of your repository, and its worktree contains only the changes you
+ selected interactively. The selected changes are then rolled back
+ from your worktree.
+ +
+ The `--patch` option implies `--keep-index`. You can use
+ `--no-keep-index` to override this.
list [<options>]::
clear::
Remove all the stashed states. Note that those states will then
- be subject to pruning, and may be difficult or impossible to recover.
+ be subject to pruning, and may be impossible to recover (see
+ 'Examples' below for a possible strategy).
drop [-q|--quiet] [<stash>]::
$ git commit foo -m 'Remaining parts'
----------------------------------------------------------------
+Recovering stashes that were cleared/dropped erroneously::
+
+If you mistakenly drop or clear stashes, they cannot be recovered
+through the normal safety mechanisms. However, you can try the
+following incantation to get a list of stashes that are still in your
+repository, but not reachable any more:
++
+----------------------------------------------------------------
+git fsck --unreachable |
+grep commit | cut -d\ -f3 |
+xargs git log --merges --no-walk --grep=WIP
+----------------------------------------------------------------
+
+
SEE ALSO
--------
linkgit:git-checkout[1],
for (specs = 0; pathspec[specs]; specs++)
/* nothing */;
seen = xcalloc(specs, 1);
- refresh_index(&the_index, verbose ? REFRESH_SAY_CHANGED : REFRESH_QUIET,
- pathspec, seen);
+ refresh_index(&the_index, verbose ? REFRESH_IN_PORCELAIN : REFRESH_QUIET,
+ pathspec, seen, "Unstaged changes after refreshing the index:");
for (i = 0; i < specs; i++) {
if (!seen[i])
die("pathspec '%s' did not match any files", pathspec[i]);
return pathspec;
}
- int interactive_add(int argc, const char **argv, const char *prefix)
+ int run_add_interactive(const char *revision, const char *patch_mode,
+ const char **pathspec)
{
- int status, ac;
+ int status, ac, pc = 0;
const char **args;
- const char **pathspec = NULL;
- if (argc) {
- pathspec = validate_pathspec(argc, argv, prefix);
- if (!pathspec)
- return -1;
- }
+ if (pathspec)
+ while (pathspec[pc])
+ pc++;
- args = xcalloc(sizeof(const char *), (argc + 4));
+ args = xcalloc(sizeof(const char *), (pc + 5));
ac = 0;
args[ac++] = "add--interactive";
- if (patch_interactive)
- args[ac++] = "--patch";
+ if (patch_mode)
+ args[ac++] = patch_mode;
+ if (revision)
+ args[ac++] = revision;
args[ac++] = "--";
- if (argc) {
- memcpy(&(args[ac]), pathspec, sizeof(const char *) * argc);
- ac += argc;
+ if (pc) {
+ memcpy(&(args[ac]), pathspec, sizeof(const char *) * pc);
+ ac += pc;
}
args[ac] = NULL;
return status;
}
+ int interactive_add(int argc, const char **argv, const char *prefix)
+ {
+ const char **pathspec = NULL;
+
+ if (argc) {
+ pathspec = validate_pathspec(argc, argv, prefix);
+ if (!pathspec)
+ return -1;
+ }
+
+ return run_add_interactive(NULL,
+ patch_interactive ? "--patch" : NULL,
+ pathspec);
+ }
+
static int edit_patch(int argc, const char **argv, const char *prefix)
{
char *file = xstrdup(git_path("ADD_EDIT.patch"));
topts.dir = xcalloc(1, sizeof(*topts.dir));
topts.dir->flags |= DIR_SHOW_IGNORED;
topts.dir->exclude_per_dir = ".gitignore";
- tree = parse_tree_indirect(old->commit->object.sha1);
+ tree = parse_tree_indirect(old->commit ?
+ old->commit->object.sha1 :
+ (unsigned char *)EMPTY_TREE_SHA1_BIN);
init_tree_desc(&trees[0], tree->buffer, tree->size);
tree = parse_tree_indirect(new->commit->object.sha1);
init_tree_desc(&trees[1], tree->buffer, tree->size);
parse_commit(new->commit);
}
- if (!old.commit && !opts->force) {
- if (!opts->quiet) {
- warning("You appear to be on a branch yet to be born.");
- warning("Forcing checkout of %s.", new->name);
- }
- opts->force = 1;
- }
-
ret = merge_working_tree(opts, &old, new);
if (ret)
return ret;
return git_xmerge_config(var, value, cb);
}
+ static int interactive_checkout(const char *revision, const char **pathspec,
+ struct checkout_opts *opts)
+ {
+ return run_add_interactive(revision, "--patch=checkout", pathspec);
+ }
+
+
int cmd_checkout(int argc, const char **argv, const char *prefix)
{
struct checkout_opts opts;
struct branch_info new;
struct tree *source_tree = NULL;
char *conflict_style = NULL;
+ int patch_mode = 0;
struct option options[] = {
OPT__QUIET(&opts.quiet),
OPT_STRING('b', NULL, &opts.new_branch, "new branch", "branch"),
2),
OPT_SET_INT('3', "theirs", &opts.writeout_stage, "stage",
3),
- OPT_BOOLEAN('f', NULL, &opts.force, "force"),
+ OPT_BOOLEAN('f', "force", &opts.force, "force"),
OPT_BOOLEAN('m', "merge", &opts.merge, "merge"),
OPT_STRING(0, "conflict", &conflict_style, "style",
"conflict style (merge or diff3)"),
+ OPT_BOOLEAN('p', "patch", &patch_mode, "select hunks interactively"),
OPT_END(),
};
int has_dash_dash;
argc = parse_options(argc, argv, prefix, options, checkout_usage,
PARSE_OPT_KEEP_DASHDASH);
+ if (patch_mode && (opts.track > 0 || opts.new_branch
+ || opts.new_branch_log || opts.merge || opts.force))
+ die ("--patch is incompatible with all other options");
+
/* --track without -b should DWIM */
if (0 < opts.track && !opts.new_branch) {
const char *argv0 = argv[0];
if (!pathspec)
die("invalid path specification");
+ if (patch_mode)
+ return interactive_checkout(new.name, pathspec, &opts);
+
/* Checkout paths */
if (opts.new_branch) {
if (argc == 1) {
return checkout_paths(source_tree, pathspec, &opts);
}
+ if (patch_mode)
+ return interactive_checkout(new.name, NULL, &opts);
+
if (opts.new_branch) {
struct strbuf buf = STRBUF_INIT;
if (strbuf_check_branch_ref(&buf, opts.new_branch))
if (read_cache() < 0)
return error("Could not read index");
- result = refresh_cache(flags) ? 1 : 0;
+ result = refresh_index(&the_index, (flags), NULL, NULL,
+ "Unstaged changes after reset:") ? 1 : 0;
if (write_cache(fd, active_cache, active_nr) ||
commit_locked_index(index_lock))
return error ("Could not refresh index");
}
}
+ static int interactive_reset(const char *revision, const char **argv,
+ const char *prefix)
+ {
+ const char **pathspec = NULL;
+
+ if (*argv)
+ pathspec = get_pathspec(prefix, argv);
+
+ return run_add_interactive(revision, "--patch=reset", pathspec);
+ }
+
static int read_from_tree(const char *prefix, const char **argv,
unsigned char *tree_sha1, int refresh_flags)
{
int cmd_reset(int argc, const char **argv, const char *prefix)
{
int i = 0, reset_type = NONE, update_ref_status = 0, quiet = 0;
+ int patch_mode = 0;
const char *rev = "HEAD";
unsigned char sha1[20], *orig = NULL, sha1_orig[20],
*old_orig = NULL, sha1_old_orig[20];
"reset HEAD, index and working tree", MERGE),
OPT_BOOLEAN('q', NULL, &quiet,
"disable showing new HEAD in hard reset and progress message"),
+ OPT_BOOLEAN('p', "patch", &patch_mode, "select hunks interactively"),
OPT_END()
};
die("Could not parse object '%s'.", rev);
hashcpy(sha1, commit->object.sha1);
+ if (patch_mode) {
+ if (reset_type != NONE)
+ die("--patch is incompatible with --{hard,mixed,soft}");
+ return interactive_reset(rev, argv + i, prefix);
+ }
+
/* git reset tree [--] paths... can be used to
* load chosen paths from the tree into the index without
* affecting the working tree nor HEAD. */
die("Cannot do %s reset with paths.",
reset_type_names[reset_type]);
return read_from_tree(prefix, argv + i, sha1,
- quiet ? REFRESH_QUIET : REFRESH_SAY_CHANGED);
+ quiet ? REFRESH_QUIET : REFRESH_IN_PORCELAIN);
}
if (reset_type == NONE)
reset_type = MIXED; /* by default */
break;
case MIXED: /* Report what has not been updated. */
update_index_refresh(0, NULL,
- quiet ? REFRESH_QUIET : REFRESH_SAY_CHANGED);
+ quiet ? REFRESH_QUIET : REFRESH_IN_PORCELAIN);
break;
}
};
extern int non_ascii(int);
+extern int has_non_ascii(const char *text);
struct rev_info; /* in revision.h, it circularly uses enum cmit_fmt */
extern char *reencode_commit_message(const struct commit *commit,
const char **encoding_p);
int register_commit_graft(struct commit_graft *, int);
struct commit_graft *lookup_commit_graft(const unsigned char *sha1);
+const unsigned char *lookup_replace_object(const unsigned char *sha1);
+
extern struct commit_list *get_merge_bases(struct commit *rev1, struct commit *rev2, int cleanup);
extern struct commit_list *get_merge_bases_many(struct commit *one, int n, struct commit **twos, int cleanup);
extern struct commit_list *get_octopus_merge_bases(struct commit_list *in);
int in_merge_bases(struct commit *, struct commit **, int);
extern int interactive_add(int argc, const char **argv, const char *prefix);
+ extern int run_add_interactive(const char *revision, const char *patch_mode,
+ const char **pathspec);
static inline int single_parent(struct commit *commit)
{
# command line options
my $patch_mode;
+ my $patch_mode_revision;
+
+ sub apply_patch;
+ sub apply_patch_for_checkout_commit;
+ sub apply_patch_for_stash;
+
+ my %patch_modes = (
+ 'stage' => {
+ DIFF => 'diff-files -p',
+ APPLY => sub { apply_patch 'apply --cached', @_; },
+ APPLY_CHECK => 'apply --cached',
+ VERB => 'Stage',
+ TARGET => '',
+ PARTICIPLE => 'staging',
+ FILTER => 'file-only',
+ },
+ 'stash' => {
+ DIFF => 'diff-index -p HEAD',
+ APPLY => sub { apply_patch 'apply --cached', @_; },
+ APPLY_CHECK => 'apply --cached',
+ VERB => 'Stash',
+ TARGET => '',
+ PARTICIPLE => 'stashing',
+ FILTER => undef,
+ },
+ 'reset_head' => {
+ DIFF => 'diff-index -p --cached',
+ APPLY => sub { apply_patch 'apply -R --cached', @_; },
+ APPLY_CHECK => 'apply -R --cached',
+ VERB => 'Unstage',
+ TARGET => '',
+ PARTICIPLE => 'unstaging',
+ FILTER => 'index-only',
+ },
+ 'reset_nothead' => {
+ DIFF => 'diff-index -R -p --cached',
+ APPLY => sub { apply_patch 'apply --cached', @_; },
+ APPLY_CHECK => 'apply --cached',
+ VERB => 'Apply',
+ TARGET => ' to index',
+ PARTICIPLE => 'applying',
+ FILTER => 'index-only',
+ },
+ 'checkout_index' => {
+ DIFF => 'diff-files -p',
+ APPLY => sub { apply_patch 'apply -R', @_; },
+ APPLY_CHECK => 'apply -R',
+ VERB => 'Discard',
+ TARGET => ' from worktree',
+ PARTICIPLE => 'discarding',
+ FILTER => 'file-only',
+ },
+ 'checkout_head' => {
+ DIFF => 'diff-index -p',
+ APPLY => sub { apply_patch_for_checkout_commit '-R', @_ },
+ APPLY_CHECK => 'apply -R',
+ VERB => 'Discard',
+ TARGET => ' from index and worktree',
+ PARTICIPLE => 'discarding',
+ FILTER => undef,
+ },
+ 'checkout_nothead' => {
+ DIFF => 'diff-index -R -p',
+ APPLY => sub { apply_patch_for_checkout_commit '', @_ },
+ APPLY_CHECK => 'apply',
+ VERB => 'Apply',
+ TARGET => ' to index and worktree',
+ PARTICIPLE => 'applying',
+ FILTER => undef,
+ },
+ );
+
+ my %patch_mode_flavour = %{$patch_modes{stage}};
sub run_cmd_pipe {
if ($^O eq 'MSWin32' || $^O eq 'msys') {
return if (!@tracked);
}
- my $reference = is_initial_commit() ? get_empty_tree() : 'HEAD';
+ my $reference;
+ if (defined $patch_mode_revision and $patch_mode_revision ne 'HEAD') {
+ $reference = $patch_mode_revision;
+ } elsif (is_initial_commit()) {
+ $reference = get_empty_tree();
+ } else {
+ $reference = 'HEAD';
+ }
for (run_cmd_pipe(qw(git diff-index --cached
--numstat --summary), $reference,
'--', @tracked)) {
print "\n";
}
+ sub run_git_apply {
+ my $cmd = shift;
+ my $fh;
+ open $fh, '| git ' . $cmd;
+ print $fh @_;
+ return close $fh;
+ }
+
sub parse_diff {
my ($path) = @_;
- my @diff = run_cmd_pipe(qw(git diff-files -p --), $path);
+ my @diff_cmd = split(" ", $patch_mode_flavour{DIFF});
+ if (defined $patch_mode_revision) {
+ push @diff_cmd, $patch_mode_revision;
+ }
+ my @diff = run_cmd_pipe("git", @diff_cmd, "--", $path);
my @colored = ();
if ($diff_use_color) {
- @colored = run_cmd_pipe(qw(git diff-files -p --color --), $path);
+ @colored = run_cmd_pipe("git", @diff_cmd, qw(--color --), $path);
}
my (@hunk) = { TEXT => [], DISPLAY => [], TYPE => 'header' };
my ($last_o_ctx, $last_was_dirty);
for (grep { $_->{USE} } @in) {
+ if ($_->{TYPE} ne 'hunk') {
+ push @out, $_;
+ next;
+ }
my $text = $_->{TEXT};
my ($o_ofs) = parse_hunk_header($text->[0]);
if (defined $last_o_ctx &&
or die "failed to open hunk edit file for writing: " . $!;
print $fh "# Manual hunk edit mode -- see bottom for a quick guide\n";
print $fh @$oldtext;
+ my $participle = $patch_mode_flavour{PARTICIPLE};
print $fh <<EOF;
# ---
# To remove '-' lines, make them ' ' lines (context).
# Lines starting with # will be removed.
#
# If the patch applies cleanly, the edited hunk will immediately be
- # marked for staging. If it does not apply cleanly, you will be given
+ # marked for $participle. If it does not apply cleanly, you will be given
# an opportunity to edit again. If all lines of the hunk are removed,
# then the edit is aborted and the hunk is left unchanged.
EOF
sub diff_applies {
my $fh;
- open $fh, '| git apply --recount --cached --check';
- for my $h (@_) {
- print $fh @{$h->{TEXT}};
- }
- return close $fh;
+ return run_git_apply($patch_mode_flavour{APPLY_CHECK} . ' --recount --check',
+ map { @{$_->{TEXT}} } @_);
}
sub _restore_terminal_and_die {
}
sub help_patch_cmd {
- print colored $help_color, <<\EOF ;
- y - stage this hunk
- n - do not stage this hunk
- q - quit, do not stage this hunk nor any of the remaining ones
- a - stage this and all the remaining hunks in the file
- d - do not stage this hunk nor any of the remaining hunks in the file
+ my $verb = lc $patch_mode_flavour{VERB};
+ my $target = $patch_mode_flavour{TARGET};
+ print colored $help_color, <<EOF ;
+ y - $verb this hunk$target
+ n - do not $verb this hunk$target
+ q - quit, do not $verb this hunk nor any of the remaining ones
+ a - $verb this and all the remaining hunks in the file
+ d - do not $verb this hunk nor any of the remaining hunks in the file
g - select a hunk to go to
/ - search for a hunk matching the given regex
j - leave this hunk undecided, see next undecided hunk
EOF
}
+ sub apply_patch {
+ my $cmd = shift;
+ my $ret = run_git_apply $cmd . ' --recount', @_;
+ if (!$ret) {
+ print STDERR @_;
+ }
+ return $ret;
+ }
+
+ sub apply_patch_for_checkout_commit {
+ my $reverse = shift;
+ my $applies_index = run_git_apply 'apply '.$reverse.' --cached --recount --check', @_;
+ my $applies_worktree = run_git_apply 'apply '.$reverse.' --recount --check', @_;
+
+ if ($applies_worktree && $applies_index) {
+ run_git_apply 'apply '.$reverse.' --cached --recount', @_;
+ run_git_apply 'apply '.$reverse.' --recount', @_;
+ return 1;
+ } elsif (!$applies_index) {
+ print colored $error_color, "The selected hunks do not apply to the index!\n";
+ if (prompt_yesno "Apply them to the worktree anyway? ") {
+ return run_git_apply 'apply '.$reverse.' --recount', @_;
+ } else {
+ print colored $error_color, "Nothing was applied.\n";
+ return 0;
+ }
+ } else {
+ print STDERR @_;
+ return 0;
+ }
+ }
+
sub patch_update_cmd {
- my @all_mods = list_modified('file-only');
+ my @all_mods = list_modified($patch_mode_flavour{FILTER});
my @mods = grep { !($_->{BINARY}) } @all_mods;
my @them;
for (@{$hunk[$ix]{DISPLAY}}) {
print;
}
- print colored $prompt_color, 'Stage ',
- ($hunk[$ix]{TYPE} eq 'mode' ? 'mode change' : 'this hunk'),
+ print colored $prompt_color, $patch_mode_flavour{VERB},
+ ($hunk[$ix]{TYPE} eq 'mode' ? ' mode change' : ' this hunk'),
+ $patch_mode_flavour{TARGET},
" [y,n,q,a,d,/$other,?]? ";
my $line = prompt_single_character;
if ($line) {
if (@result) {
my $fh;
-
- open $fh, '| git apply --cached --recount';
- for (@{$head->{TEXT}}, @result) {
- print $fh $_;
- }
- if (!close $fh) {
- for (@{$head->{TEXT}}, @result) {
- print STDERR $_;
- }
- }
+ my @patch = (@{$head->{TEXT}}, @result);
+ my $apply_routine = $patch_mode_flavour{APPLY};
+ &$apply_routine(@patch);
refresh();
}
sub process_args {
return unless @ARGV;
my $arg = shift @ARGV;
- if ($arg eq "--patch") {
- $patch_mode = 1;
- $arg = shift @ARGV or die "missing --";
+ if ($arg =~ /--patch(?:=(.*))?/) {
+ if (defined $1) {
+ if ($1 eq 'reset') {
+ $patch_mode = 'reset_head';
+ $patch_mode_revision = 'HEAD';
+ $arg = shift @ARGV or die "missing --";
+ if ($arg ne '--') {
+ $patch_mode_revision = $arg;
+ $patch_mode = ($arg eq 'HEAD' ?
+ 'reset_head' : 'reset_nothead');
+ $arg = shift @ARGV or die "missing --";
+ }
+ } elsif ($1 eq 'checkout') {
+ $arg = shift @ARGV or die "missing --";
+ if ($arg eq '--') {
+ $patch_mode = 'checkout_index';
+ } else {
+ $patch_mode_revision = $arg;
+ $patch_mode = ($arg eq 'HEAD' ?
+ 'checkout_head' : 'checkout_nothead');
+ $arg = shift @ARGV or die "missing --";
+ }
+ } elsif ($1 eq 'stage' or $1 eq 'stash') {
+ $patch_mode = $1;
+ $arg = shift @ARGV or die "missing --";
+ } else {
+ die "unknown --patch mode: $1";
+ }
+ } else {
+ $patch_mode = 'stage';
+ $arg = shift @ARGV or die "missing --";
+ }
die "invalid argument $arg, expecting --"
unless $arg eq "--";
+ %patch_mode_flavour = %{$patch_modes{$patch_mode}};
}
elsif ($arg ne "--") {
die "invalid argument $arg, expecting --";
or: $dashless drop [-q|--quiet] [<stash>]
or: $dashless ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: $dashless branch <branchname> [<stash>]
- or: $dashless [save [--keep-index] [-q|--quiet] [<message>]]
+ or: $dashless [save [-k|--keep-index] [-q|--quiet] [<message>]]
or: $dashless clear"
SUBDIRECTORY_OK=Yes
ref_stash=refs/stash
+ if git config --get-colorbool color.interactive; then
+ help_color="$(git config --get-color color.interactive.help 'red bold')"
+ reset_color="$(git config --get-color '' reset)"
+ else
+ help_color=
+ reset_color=
+ fi
+
no_changes () {
git diff-index --quiet --cached HEAD --ignore-submodules -- &&
git diff-files --quiet --ignore-submodules
git commit-tree $i_tree -p $b_commit) ||
die "Cannot save the current index state"
- # state of the working tree
- w_tree=$( (
+ if test -z "$patch_mode"
+ then
+
+ # state of the working tree
+ w_tree=$( (
+ rm -f "$TMP-index" &&
+ cp -p ${GIT_INDEX_FILE-"$GIT_DIR/index"} "$TMP-index" &&
+ GIT_INDEX_FILE="$TMP-index" &&
+ export GIT_INDEX_FILE &&
+ git read-tree -m $i_tree &&
+ git add -u &&
+ git write-tree &&
+ rm -f "$TMP-index"
+ ) ) ||
+ die "Cannot save the current worktree state"
+
+ else
+
rm -f "$TMP-index" &&
- cp -p ${GIT_INDEX_FILE-"$GIT_DIR/index"} "$TMP-index" &&
- GIT_INDEX_FILE="$TMP-index" &&
- export GIT_INDEX_FILE &&
- git read-tree -m $i_tree &&
- git add -u &&
- git write-tree &&
- rm -f "$TMP-index"
- ) ) ||
+ GIT_INDEX_FILE="$TMP-index" git read-tree HEAD &&
+
+ # find out what the user wants
+ GIT_INDEX_FILE="$TMP-index" \
+ git add--interactive --patch=stash -- &&
+
+ # state of the working tree
+ w_tree=$(GIT_INDEX_FILE="$TMP-index" git write-tree) ||
die "Cannot save the current worktree state"
+ git diff-tree -p HEAD $w_tree > "$TMP-patch" &&
+ test -s "$TMP-patch" ||
+ die "No changes selected"
+
+ rm -f "$TMP-index" ||
+ die "Cannot remove temporary index (can't happen)"
+
+ fi
+
# create the stash
if test -z "$stash_msg"
then
save_stash () {
keep_index=
+ patch_mode=
while test $# != 0
do
case "$1" in
- --keep-index)
+ -k|--keep-index)
+ keep_index=t
+ ;;
+ --no-keep-index)
+ keep_index=
+ ;;
+ -p|--patch)
+ patch_mode=t
keep_index=t
;;
-q|--quiet)
GIT_QUIET=t
;;
+ --)
+ shift
+ break
+ ;;
+ -*)
+ echo "error: unknown option for 'stash save': $1"
+ usage
+ ;;
*)
break
;;
die "Cannot save the current status"
say Saved working directory and index state "$stash_msg"
- git reset --hard ${GIT_QUIET:+-q}
-
- if test -n "$keep_index" && test -n $i_tree
+ if test -z "$patch_mode"
then
- git read-tree --reset -u $i_tree
+ git reset --hard ${GIT_QUIET:+-q}
+
+ if test -n "$keep_index" && test -n $i_tree
+ then
+ git read-tree --reset -u $i_tree
+ fi
+ else
+ git apply -R < "$TMP-patch" ||
+ die "Cannot remove worktree changes"
+
+ if test -z "$keep_index"
+ then
+ git reset
+ fi
fi
}
}
apply_stash () {
- git update-index -q --refresh &&
- git diff-files --quiet --ignore-submodules ||
- die 'Cannot apply to a dirty working tree, please stage your changes'
-
unstash_index=
while test $# != 0
shift
done
- # current index state
- c_tree=$(git write-tree) ||
- die 'Cannot apply a stash in the middle of a merge'
+ if test $# = 0
+ then
+ have_stash || die 'Nothing to apply'
+ fi
# stash records the work tree, and is a merge between the
# base commit (first parent) and the index tree (second parent).
- s=$(git rev-parse --verify --default $ref_stash "$@") &&
- w_tree=$(git rev-parse --verify "$s:") &&
- b_tree=$(git rev-parse --verify "$s^1:") &&
- i_tree=$(git rev-parse --verify "$s^2:") ||
+ s=$(git rev-parse --quiet --verify --default $ref_stash "$@") &&
+ w_tree=$(git rev-parse --quiet --verify "$s:") &&
+ b_tree=$(git rev-parse --quiet --verify "$s^1:") &&
+ i_tree=$(git rev-parse --quiet --verify "$s^2:") ||
die "$*: no valid stashed state found"
+ git update-index -q --refresh &&
+ git diff-files --quiet --ignore-submodules ||
+ die 'Cannot apply to a dirty working tree, please stage your changes'
+
+ # current index state
+ c_tree=$(git write-tree) ||
+ die 'Cannot apply a stash in the middle of a merge'
+
unstashed_index_tree=
if test -n "$unstash_index" && test "$b_tree" != "$i_tree" &&
test "$c_tree" != "$i_tree"
drop_stash $stash
}
+ # The default command is "save" if nothing but options are given
+ seen_non_option=
+ for opt
+ do
+ case "$opt" in
+ -*) ;;
+ *) seen_non_option=t; break ;;
+ esac
+ done
+
+ test -n "$seen_non_option" || set "save" "$@"
+
# Main command set
case "$1" in
list)
apply_to_branch "$@"
;;
*)
- if test $# -eq 0
- then
+ case $# in
+ 0)
save_stash &&
say '(To restore them type "git stash apply")'
- else
+ ;;
+ *)
usage
- fi
+ esac
;;
esac
projects / git.git / commitdiff