git-rebase.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2005 Junio C Hamano.
   4 #
   5
   6 USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] [<upstream>|--root] [<branch>] [--quiet | -q]'
   7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
   8 same name.  When the --onto option is provided the new branch starts
   9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
  10 It then attempts to create a new commit for each commit from the original
  11 <branch> that does not exist in the <upstream> branch.
  12
  13 It is possible that a merge failure will prevent this process from being
  14 completely automatic.  You will have to resolve any such merge failure
  15 and run git rebase --continue.  Another option is to bypass the commit
  16 that caused the merge failure with git rebase --skip.  To restore the
  17 original <branch> and remove the .git/rebase-apply working files, use the
  18 command git rebase --abort instead.
  19
  20 Note that if <branch> is not specified on the command line, the
  21 currently checked out branch is used.
  22
  23 Example:       git-rebase master~1 topic
  24
  25         A---B---C topic                   A'\''--B'\''--C'\'' topic
  26        /                   -->           /
  27   D---E---F---G master          D---E---F---G master
  28 '
  29
  30 SUBDIRECTORY_OK=Yes
  31 OPTIONS_SPEC=
  32 . git-sh-setup
  33 set_reflog_action rebase
  34 require_work_tree
  35 cd_to_toplevel
  36
  37 LF='
  38 '
  39 OK_TO_SKIP_PRE_REBASE=
  40 RESOLVEMSG="
  41 When you have resolved this problem run \"git rebase --continue\".
  42 If you would prefer to skip this patch, instead run \"git rebase --skip\".
  43 To restore the original branch and stop rebasing run \"git rebase --abort\".
  44 "
  45 unset newbase
  46 strategy=recursive
  47 do_merge=
  48 dotest="$GIT_DIR"/rebase-merge
  49 prec=4
  50 verbose=
  51 diffstat=$(git config --bool rebase.stat)
  52 git_am_opt=
  53 rebase_root=
  54 force_rebase=
  55 allow_rerere_autoupdate=
  56
  57 continue_merge () {
  58         test -n "$prev_head" || die "prev_head must be defined"
  59         test -d "$dotest" || die "$dotest directory does not exist"
  60
  61         unmerged=$(git ls-files -u)
  62         if test -n "$unmerged"
  63         then
  64                 echo "You still have unmerged paths in your index"
  65                 echo "did you forget to use git add?"
  66                 die "$RESOLVEMSG"
  67         fi
  68
  69         cmt=`cat "$dotest/current"`
  70         if ! git diff-index --quiet --ignore-submodules HEAD --
  71         then
  72                 if ! git commit --no-verify -C "$cmt"
  73                 then
  74                         echo "Commit failed, please do not call \"git commit\""
  75                         echo "directly, but instead do one of the following: "
  76                         die "$RESOLVEMSG"
  77                 fi
  78                 if test -z "$GIT_QUIET"
  79                 then
  80                         printf "Committed: %0${prec}d " $msgnum
  81                 fi
  82                 echo "$cmt $(git rev-parse HEAD^0)" >> "$dotest/rewritten"
  83         else
  84                 if test -z "$GIT_QUIET"
  85                 then
  86                         printf "Already applied: %0${prec}d " $msgnum
  87                 fi
  88         fi
  89         test -z "$GIT_QUIET" &&
  90         GIT_PAGER='' git log --format=%s -1 "$cmt"
  91
  92         prev_head=`git rev-parse HEAD^0`
  93         # save the resulting commit so we can read-tree on it later
  94         echo "$prev_head" > "$dotest/prev_head"
  95
  96         # onto the next patch:
  97         msgnum=$(($msgnum + 1))
  98         echo "$msgnum" >"$dotest/msgnum"
  99 }
 100
 101 call_merge () {
 102         cmt="$(cat "$dotest/cmt.$1")"
 103         echo "$cmt" > "$dotest/current"
 104         hd=$(git rev-parse --verify HEAD)
 105         cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
 106         msgnum=$(cat "$dotest/msgnum")
 107         end=$(cat "$dotest/end")
 108         eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
 109         eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
 110         export GITHEAD_$cmt GITHEAD_$hd
 111         if test -n "$GIT_QUIET"
 112         then
 113                 export GIT_MERGE_VERBOSITY=1
 114         fi
 115         git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
 116         rv=$?
 117         case "$rv" in
 118         0)
 119                 unset GITHEAD_$cmt GITHEAD_$hd
 120                 return
 121                 ;;
 122         1)
 123                 git rerere $allow_rerere_autoupdate
 124                 die "$RESOLVEMSG"
 125                 ;;
 126         2)
 127                 echo "Strategy: $rv $strategy failed, try another" 1>&2
 128                 die "$RESOLVEMSG"
 129                 ;;
 130         *)
 131                 die "Unknown exit code ($rv) from command:" \
 132                         "git-merge-$strategy $cmt^ -- HEAD $cmt"
 133                 ;;
 134         esac
 135 }
 136
 137 move_to_original_branch () {
 138         test -z "$head_name" &&
 139                 head_name="$(cat "$dotest"/head-name)" &&
 140                 onto="$(cat "$dotest"/onto)" &&
 141                 orig_head="$(cat "$dotest"/orig-head)"
 142         case "$head_name" in
 143         refs/*)
 144                 message="rebase finished: $head_name onto $onto"
 145                 git update-ref -m "$message" \
 146                         $head_name $(git rev-parse HEAD) $orig_head &&
 147                 git symbolic-ref HEAD $head_name ||
 148                 die "Could not move back to $head_name"
 149                 ;;
 150         esac
 151 }
 152
 153 finish_rb_merge () {
 154         move_to_original_branch
 155         git notes copy --for-rewrite=rebase < "$dotest"/rewritten
 156         if test -x "$GIT_DIR"/hooks/post-rewrite &&
 157                 test -s "$dotest"/rewritten; then
 158                 "$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
 159         fi
 160         rm -r "$dotest"
 161         say All done.
 162 }
 163
 164 is_interactive () {
 165         while test $# != 0
 166         do
 167                 case "$1" in
 168                         -i|--interactive)
 169                                 interactive_rebase=explicit
 170                                 break
 171                         ;;
 172                         -p|--preserve-merges)
 173                                 interactive_rebase=implied
 174                         ;;
 175                 esac
 176                 shift
 177         done
 178
 179         if [ "$interactive_rebase" = implied ]; then
 180                 GIT_EDITOR=:
 181                 export GIT_EDITOR
 182         fi
 183
 184         test -n "$interactive_rebase" || test -f "$dotest"/interactive
 185 }
 186
 187 run_pre_rebase_hook () {
 188         if test -z "$OK_TO_SKIP_PRE_REBASE" &&
 189            test -x "$GIT_DIR/hooks/pre-rebase"
 190         then
 191                 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} ||
 192                 die "The pre-rebase hook refused to rebase."
 193         fi
 194 }
 195
 196 test -f "$GIT_DIR"/rebase-apply/applying &&
 197         die 'It looks like git-am is in progress. Cannot rebase.'
 198
 199 is_interactive "$@" && exec git-rebase--interactive "$@"
 200
 201 if test $# -eq 0
 202 then
 203         test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage
 204         test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing &&
 205                 die 'A rebase is in progress, try --continue, --skip or --abort.'
 206         die "No arguments given and $GIT_DIR/rebase-apply already exists."
 207 fi
 208
 209 while test $# != 0
 210 do
 211         case "$1" in
 212         --no-verify)
 213                 OK_TO_SKIP_PRE_REBASE=yes
 214                 ;;
 215         --continue)
 216                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 217                         die "No rebase in progress?"
 218
 219                 git diff-files --quiet --ignore-submodules || {
 220                         echo "You must edit all merge conflicts and then"
 221                         echo "mark them as resolved using git add"
 222                         exit 1
 223                 }
 224                 if test -d "$dotest"
 225                 then
 226                         prev_head=$(cat "$dotest/prev_head")
 227                         end=$(cat "$dotest/end")
 228                         msgnum=$(cat "$dotest/msgnum")
 229                         onto=$(cat "$dotest/onto")
 230                         GIT_QUIET=$(cat "$dotest/quiet")
 231                         continue_merge
 232                         while test "$msgnum" -le "$end"
 233                         do
 234                                 call_merge "$msgnum"
 235                                 continue_merge
 236                         done
 237                         finish_rb_merge
 238                         exit
 239                 fi
 240                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 241                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 242                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 243                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 244                 git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
 245                 move_to_original_branch
 246                 exit
 247                 ;;
 248         --skip)
 249                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 250                         die "No rebase in progress?"
 251
 252                 git reset --hard HEAD || exit $?
 253                 if test -d "$dotest"
 254                 then
 255                         git rerere clear
 256                         prev_head=$(cat "$dotest/prev_head")
 257                         end=$(cat "$dotest/end")
 258                         msgnum=$(cat "$dotest/msgnum")
 259                         msgnum=$(($msgnum + 1))
 260                         onto=$(cat "$dotest/onto")
 261                         GIT_QUIET=$(cat "$dotest/quiet")
 262                         while test "$msgnum" -le "$end"
 263                         do
 264                                 call_merge "$msgnum"
 265                                 continue_merge
 266                         done
 267                         finish_rb_merge
 268                         exit
 269                 fi
 270                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 271                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 272                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 273                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 274                 git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
 275                 move_to_original_branch
 276                 exit
 277                 ;;
 278         --abort)
 279                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 280                         die "No rebase in progress?"
 281
 282                 git rerere clear
 283                 if test -d "$dotest"
 284                 then
 285                         GIT_QUIET=$(cat "$dotest/quiet")
 286                         move_to_original_branch
 287                 else
 288                         dotest="$GIT_DIR"/rebase-apply
 289                         GIT_QUIET=$(cat "$dotest/quiet")
 290                         move_to_original_branch
 291                 fi
 292                 git reset --hard $(cat "$dotest/orig-head")
 293                 rm -r "$dotest"
 294                 exit
 295                 ;;
 296         --onto)
 297                 test 2 -le "$#" || usage
 298                 newbase="$2"
 299                 shift
 300                 ;;
 301         -M|-m|--m|--me|--mer|--merg|--merge)
 302                 do_merge=t
 303                 ;;
 304         -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
 305                 --strateg=*|--strategy=*|\
 306         -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
 307                 case "$#,$1" in
 308                 *,*=*)
 309                         strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
 310                 1,*)
 311                         usage ;;
 312                 *)
 313                         strategy="$2"
 314                         shift ;;
 315                 esac
 316                 do_merge=t
 317                 ;;
 318         -n|--no-stat)
 319                 diffstat=
 320                 ;;
 321         --stat)
 322                 diffstat=t
 323                 ;;
 324         -v|--verbose)
 325                 verbose=t
 326                 diffstat=t
 327                 GIT_QUIET=
 328                 ;;
 329         -q|--quiet)
 330                 GIT_QUIET=t
 331                 git_am_opt="$git_am_opt -q"
 332                 verbose=
 333                 diffstat=
 334                 ;;
 335         --whitespace=*)
 336                 git_am_opt="$git_am_opt $1"
 337                 case "$1" in
 338                 --whitespace=fix|--whitespace=strip)
 339                         force_rebase=t
 340                         ;;
 341                 esac
 342                 ;;
 343         --ignore-whitespace)
 344                 git_am_opt="$git_am_opt $1"
 345                 ;;
 346         --committer-date-is-author-date|--ignore-date)
 347                 git_am_opt="$git_am_opt $1"
 348                 force_rebase=t
 349                 ;;
 350         -C*)
 351                 git_am_opt="$git_am_opt $1"
 352                 ;;
 353         --root)
 354                 rebase_root=t
 355                 ;;
 356         -f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
 357                 force_rebase=t
 358                 ;;
 359         --rerere-autoupdate|--no-rerere-autoupdate)
 360                 allow_rerere_autoupdate="$1"
 361                 ;;
 362         -*)
 363                 usage
 364                 ;;
 365         *)
 366                 break
 367                 ;;
 368         esac
 369         shift
 370 done
 371 test $# -gt 2 && usage
 372
 373 # Make sure we do not have $GIT_DIR/rebase-apply
 374 if test -z "$do_merge"
 375 then
 376         if mkdir "$GIT_DIR"/rebase-apply 2>/dev/null
 377         then
 378                 rmdir "$GIT_DIR"/rebase-apply
 379         else
 380                 echo >&2 '
 381 It seems that I cannot create a rebase-apply directory, and
 382 I wonder if you are in the middle of patch application or another
 383 rebase.  If that is not the case, please
 384         rm -fr '"$GIT_DIR"'/rebase-apply
 385 and run me again.  I am stopping in case you still have something
 386 valuable there.'
 387                 exit 1
 388         fi
 389 else
 390         if test -d "$dotest"
 391         then
 392                 die "previous rebase directory $dotest still exists." \
 393                         'Try git rebase (--continue | --abort | --skip)'
 394         fi
 395 fi
 396
 397 # The tree must be really really clean.
 398 if ! git update-index --ignore-submodules --refresh > /dev/null; then
 399         echo >&2 "cannot rebase: you have unstaged changes"
 400         git diff-files --name-status -r --ignore-submodules -- >&2
 401         exit 1
 402 fi
 403 diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --)
 404 case "$diff" in
 405 ?*)     echo >&2 "cannot rebase: your index contains uncommitted changes"
 406         echo >&2 "$diff"
 407         exit 1
 408         ;;
 409 esac
 410
 411 if test -z "$rebase_root"
 412 then
 413         # The upstream head must be given.  Make sure it is valid.
 414         upstream_name="$1"
 415         shift
 416         upstream=`git rev-parse --verify "${upstream_name}^0"` ||
 417         die "invalid upstream $upstream_name"
 418         unset root_flag
 419         upstream_arg="$upstream_name"
 420 else
 421         test -z "$newbase" && die "--root must be used with --onto"
 422         unset upstream_name
 423         unset upstream
 424         root_flag="--root"
 425         upstream_arg="$root_flag"
 426 fi
 427
 428 # Make sure the branch to rebase onto is valid.
 429 onto_name=${newbase-"$upstream_name"}
 430 case "$onto_name" in
 431 *...*)
 432         if      left=${onto_name%...*} right=${onto_name#*...} &&
 433                 onto=$(git merge-base --all ${left:-HEAD} ${right:-HEAD})
 434         then
 435                 case "$onto" in
 436                 ?*"$LF"?*)
 437                         die "$onto_name: there are more than one merge bases"
 438                         ;;
 439                 '')
 440                         die "$onto_name: there is no merge base"
 441                         ;;
 442                 esac
 443         else
 444                 die "$onto_name: there is no merge base"
 445         fi
 446         ;;
 447 *)
 448         onto=$(git rev-parse --verify "${onto_name}^0") || exit
 449         ;;
 450 esac
 451
 452 # If a hook exists, give it a chance to interrupt
 453 run_pre_rebase_hook "$upstream_arg" "$@"
 454
 455 # If the branch to rebase is given, that is the branch we will rebase
 456 # $branch_name -- branch being rebased, or HEAD (already detached)
 457 # $orig_head -- commit object name of tip of the branch before rebasing
 458 # $head_name -- refs/heads/<that-branch> or "detached HEAD"
 459 switch_to=
 460 case "$#" in
 461 1)
 462         # Is it "rebase other $branchname" or "rebase other $commit"?
 463         branch_name="$1"
 464         switch_to="$1"
 465
 466         if git show-ref --verify --quiet -- "refs/heads/$1" &&
 467            branch=$(git rev-parse -q --verify "refs/heads/$1")
 468         then
 469                 head_name="refs/heads/$1"
 470         elif branch=$(git rev-parse -q --verify "$1")
 471         then
 472                 head_name="detached HEAD"
 473         else
 474                 usage
 475         fi
 476         ;;
 477 *)
 478         # Do not need to switch branches, we are already on it.
 479         if branch_name=`git symbolic-ref -q HEAD`
 480         then
 481                 head_name=$branch_name
 482                 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
 483         else
 484                 head_name="detached HEAD"
 485                 branch_name=HEAD ;# detached
 486         fi
 487         branch=$(git rev-parse --verify "${branch_name}^0") || exit
 488         ;;
 489 esac
 490 orig_head=$branch
 491
 492 # Now we are rebasing commits $upstream..$branch (or with --root,
 493 # everything leading up to $branch) on top of $onto
 494
 495 # Check if we are already based on $onto with linear history,
 496 # but this should be done only when upstream and onto are the same.
 497 mb=$(git merge-base "$onto" "$branch")
 498 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
 499         # linear history?
 500         ! (git rev-list --parents "$onto".."$branch" | sane_grep " .* ") > /dev/null
 501 then
 502         if test -z "$force_rebase"
 503         then
 504                 # Lazily switch to the target branch if needed...
 505                 test -z "$switch_to" || git checkout "$switch_to"
 506                 say "Current branch $branch_name is up to date."
 507                 exit 0
 508         else
 509                 say "Current branch $branch_name is up to date, rebase forced."
 510         fi
 511 fi
 512
 513 # Detach HEAD and reset the tree
 514 say "First, rewinding head to replay your work on top of it..."
 515 git checkout -q "$onto^0" || die "could not detach HEAD"
 516 git update-ref ORIG_HEAD $branch
 517
 518 if test -n "$diffstat"
 519 then
 520         if test -n "$verbose"
 521         then
 522                 echo "Changes from $mb to $onto:"
 523         fi
 524         # We want color (if set), but no pager
 525         GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
 526 fi
 527
 528 # If the $onto is a proper descendant of the tip of the branch, then
 529 # we just fast-forwarded.
 530 if test "$mb" = "$branch"
 531 then
 532         say "Fast-forwarded $branch_name to $onto_name."
 533         move_to_original_branch
 534         exit 0
 535 fi
 536
 537 if test -n "$rebase_root"
 538 then
 539         revisions="$onto..$orig_head"
 540 else
 541         revisions="$upstream..$orig_head"
 542 fi
 543
 544 if test -z "$do_merge"
 545 then
 546         git format-patch -k --stdout --full-index --ignore-if-in-upstream \
 547                 $root_flag "$revisions" |
 548         git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
 549         move_to_original_branch
 550         ret=$?
 551         test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
 552                 echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
 553                 echo $onto > "$GIT_DIR"/rebase-apply/onto &&
 554                 echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head &&
 555                 echo "$GIT_QUIET" > "$GIT_DIR"/rebase-apply/quiet
 556         exit $ret
 557 fi
 558
 559 # start doing a rebase with git-merge
 560 # this is rename-aware if the recursive (default) strategy is used
 561
 562 mkdir -p "$dotest"
 563 echo "$onto" > "$dotest/onto"
 564 echo "$onto_name" > "$dotest/onto_name"
 565 prev_head=$orig_head
 566 echo "$prev_head" > "$dotest/prev_head"
 567 echo "$orig_head" > "$dotest/orig-head"
 568 echo "$head_name" > "$dotest/head-name"
 569 echo "$GIT_QUIET" > "$dotest/quiet"
 570
 571 msgnum=0
 572 for cmt in `git rev-list --reverse --no-merges "$revisions"`
 573 do
 574         msgnum=$(($msgnum + 1))
 575         echo "$cmt" > "$dotest/cmt.$msgnum"
 576 done
 577
 578 echo 1 >"$dotest/msgnum"
 579 echo $msgnum >"$dotest/end"
 580
 581 end=$msgnum
 582 msgnum=1
 583
 584 while test "$msgnum" -le "$end"
 585 do
 586         call_merge "$msgnum"
 587         continue_merge
 588 done
 589
 590 finish_rb_merge