--- /dev/null
+From 893330638a26ea2868c6e7606047acf9b6fe31ea Mon Sep 17 00:00:00 2001
+From: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+Date: Sun, 30 Nov 2014 17:30:36 +0100
+Subject: [PATCH 1/1] Fix compilation error in src/flash/nor/mini51.c
+
+0001-Fix-compilation-error-in-src-flash-nor-mini51.c.patch
+gcc complains about missing initialization of
+local variable flash_size and compilation aborts
+
+Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+---
+ src/flash/nor/mini51.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/flash/nor/mini51.c b/src/flash/nor/mini51.c
+index 61aee5d..c7ba13a 100644
+--- a/src/flash/nor/mini51.c
++++ b/src/flash/nor/mini51.c
+@@ -397,7 +397,7 @@ static int mini51_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t
+
+ static int mini51_probe(struct flash_bank *bank)
+ {
+- uint32_t flash_size;
++ uint32_t flash_size = 0;
+ int retval;
+ int num_pages;
+ uint32_t offset = 0;
+--
+2.1.3
+
--- /dev/null
+From 3bef159779c8fd39a070ec5c8191e18ba2efa79d Mon Sep 17 00:00:00 2001
+From: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+Date: Sun, 30 Nov 2014 18:21:58 +0100
+Subject: [PATCH 2/2] Fix jimtcl auto configuration to force static library
+ only. jimtcl ignores a --disable-shared option if a previous --enable-shared
+ option was given. This breaks openocd compilation if shared was the preferred
+ option in buildroot project.
+
+Signed-off-by: Claudio Laurita <claudio.laurita@integrazionetotale.it>
+---
+ jimtcl/auto.def | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/jimtcl/auto.def b/jimtcl/auto.def
+index ddb0c1e..929ade0 100644
+--- a/jimtcl/auto.def
++++ b/jimtcl/auto.def
+@@ -181,12 +181,8 @@ if {[opt-bool references]} {
+ msg-result "Enabling references"
+ define JIM_REFERENCES
+ }
+-if {[opt-bool shared with-jim-shared]} {
+- msg-result "Building shared library"
+-} else {
+- msg-result "Building static library"
+- define JIM_STATICLIB
+-}
++msg-result "Building static library"
++define JIM_STATICLIB
+ define JIM_INSTALL [opt-bool install-jim]
+
+ # Attributes of the extensions
+--
+2.1.3
+
config BR2_PACKAGE_OPENOCD
bool "openocd"
- depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
- select BR2_PACKAGE_LIBUSB
- select BR2_PACKAGE_LIBUSB_COMPAT
help
OpenOCD - Open On-Chip Debugger
comment "Adapters"
-config BR2_PACKAGE_OPENOCD_FT2XXX
- bool "FT2xxx/FT4xxx Based JTAG Programmer"
- depends on BR2_ARCH_HAS_ATOMICS # libftdi
- select BR2_PACKAGE_LIBFTDI
+config BR2_PACKAGE_OPENOCD_FTDI
+ bool "MPSSE mode of FTDI based devices"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the MPSSE mode of FTDI
+ (FT2xxx/FT4xxx) based devices (default is auto)
+
+config BR2_PACKAGE_OPENOCD_STLINK
+ bool "ST-Link JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the ST-Link JTAG
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_TI_ICDI
+ bool "TI ICDI JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the TI ICDI JTAG
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_ULINK
+ bool "Keil ULINK JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the Keil ULINK JTAG
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_UBLASTER2
+ bool "Altera USB-Blaster II Compatible"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
help
- Enable building support for FT2232 based devices
- using the libftdi driver, opensource alternate of FTD2XX
+ Enable building support for the Altera USB-Blaster
+ II Compatible (default is auto)
config BR2_PACKAGE_OPENOCD_JLINK
bool "Segger J-Link JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
help
- Segger J-Link JTAG Programmer and clone such as Atmel SAM-ICE
+ Segger J-Link JTAG Programmer and clone such as Atmel
+ SAM-ICE
+
+config BR2_PACKAGE_OPENOCD_OSDBM
+ bool "OSDBM JTAG (only) Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the OSBDM (JTAG only)
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_OPENDOUS
+ bool "eStick/opendous JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the eStick/opendous JTAG
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_AICE
+ bool "Andes JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+ help
+ Enable building support for the Andes JTAG
+ Programmer (default is auto)
config BR2_PACKAGE_OPENOCD_VSLLINK
- bool "Versaloon-Link JTAG Programmr"
+ bool "Versaloon-Link JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB_COMPAT
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+ help
+ Enable building support for the Versaloon-Link JTAG
+ Programmer (default is auto)
-endif # BR2_PACKAGE_OPENOCD
+config BR2_PACKAGE_OPENOCD_USBPROG
+ bool "USBProg JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB_COMPAT
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+ help
+ Enable building support for the USBProg JTAG
+ Programmer (default is auto)
-comment "openocd needs a toolchain w/ threads"
+config BR2_PACKAGE_OPENOCD_RLINK
+ bool "Raisonance RLink JTAG Programmer"
+ select BR2_PACKAGE_LIBUSB_COMPAT
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+ help
+ Enable building support for the Raisonance RLink
+ JTAG Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_ARMEW
+ bool "Olimex ARM-JTAG-EW Programmer"
+ select BR2_PACKAGE_LIBUSB_COMPAT
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb
+ help
+ Enable building support for the Olimex ARM-JTAG-EW
+ Programmer (default is auto)
+
+config BR2_PACKAGE_OPENOCD_PARPORT
+ bool "pc parallel port driver"
+ help
+ Enable building the pc parallel port driver
+
+config BR2_PACKAGE_OPENOCD_FT2XXX
+ bool "FT2232 based devices (DEPRECATED)"
+ select BR2_PACKAGE_LIBFTDI
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+ depends on BR2_ARCH_HAS_ATOMICS
+ help
+ (DEPRECATED) Enable building support for FT2232
+ based devices using the libftdi library
+
+config BR2_PACKAGE_OPENOCD_VPI
+ bool "JTAG VPI"
+ help
+ Enable building support for JTAG VPI
+
+config BR2_PACKAGE_OPENOCD_UBLASTER
+ bool "Altera USB-Blaster"
+ select BR2_PACKAGE_LIBFTDI
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+ depends on BR2_ARCH_HAS_ATOMICS
+ help
+ Enable building support for the Altera USB-Blaster
+ using the libftdi driver, opensource alternate of
+ FTD2XX
+
+config BR2_PACKAGE_OPENOCD_AMTJT
+ bool "Amontec JTAG-Accelerator"
+ help
+ Enable building the Amontec JTAG-Accelerator driver
+
+if BR2_arm
+
+config BR2_PACKAGE_OPENOCD_EP93XX
+ bool "EP93xx based SBCs"
+ help
+ Enable building support for EP93xx based SBCs
+
+config BR2_PACKAGE_OPENOCD_AT91RM
+ bool "AT91RM9200 based SBCs"
+ help
+ Enable building support for AT91RM9200 based SBCs
+
+config BR2_PACKAGE_OPENOCD_BCM2835
+ bool "bitbanging on BCM2835"
+ help
+ Enable building support for bitbanging on BCM2835
+ (as found in Raspberry Pi)
+
+endif # BR2_arm
+
+config BR2_PACKAGE_OPENOCD_GW16012
+ bool "Gateworks GW16012 JTAG Programmer"
+ help
+ Enable building support for the Gateworks GW16012
+ JTAG Programmer
+
+config BR2_PACKAGE_OPENOCD_PRESTO
+ bool "ASIX Presto Programmer"
+ select BR2_PACKAGE_LIBFTDI
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+ depends on BR2_ARCH_HAS_ATOMICS
+ help
+ Enable building support for ASIX Presto Programmer
+ using the libftdi driver
+
+config BR2_PACKAGE_OPENOCD_OPENJTAG
+ bool "OpenJTAG Programmer"
+ select BR2_PACKAGE_LIBFTDI
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb
+ depends on BR2_ARCH_HAS_ATOMICS
+ help
+ Enable building support for the OpenJTAG Programmer
+ with ftdi driver
+
+config BR2_PACKAGE_OPENOCD_BUSPIRATE
+ bool "Buspirate"
+ help
+ Enable building support for the Buspirate
+
+config BR2_PACKAGE_OPENOCD_SYSFS
+ bool "programming via sysfs gpios"
+ help
+ Enable building support for programming driven via
+ sysfs gpios.
+
+# Many adapters need libusb or libusb-compat, which require threads,
+# but we don't want to duplicate this comment for all adapters that
+# select libusb or libusb-compat.
+comment "many openocd adapters needs a toolchain w/ threads"
depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+endif # BR2_PACKAGE_OPENOCD
+++ /dev/null
-From 3728c4af7f6303ccedab56ec220797f8f290580e Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 10 Aug 2011 00:17:29 +0800
-Subject: [PATCH] fix cross compilation: host libsub was used before
-
-tested in buildroot
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- configure.in | 7 +++++--
- 1 files changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/configure.in b/configure.in
-index dfa1e8f..cfe2218 100644
---- a/configure.in
-+++ b/configure.in
-@@ -1046,8 +1046,11 @@ build_usb=no
- if test $build_jlink = yes -o $build_vsllink = yes -o $build_usbprog = yes -o \
- $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes
- then
-- AC_CHECK_HEADERS([usb.h],[],
-- [AC_MSG_ERROR([usb.h is required to build some OpenOCD driver(s)])])
-+ dnl check for libusb
-+ PKG_CHECK_MODULES(LIBUSB, libusb >= 0.1.11)
-+ CFLAGS="$CFLAGS $LIBUSB_CFLAGS"
-+ LDFLAGS="$LDFLAGS $LIBUSB_LDFLAGS"
-+ LIBS="$LIBS $LIBUSB_LIBS"
- build_usb=yes
- fi
-
---
-1.7.5.4
-
+++ /dev/null
-xscale: fix uninitialise breakpoint_pc
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- src/target/xscale.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: b/src/target/xscale.c
-===================================================================
---- a/src/target/xscale.c
-+++ b/src/target/xscale.c
-@@ -2811,7 +2811,7 @@ static int xscale_analyze_trace(struct t
- struct xscale_common *xscale = target_to_xscale(target);
- struct xscale_trace_data *trace_data = xscale->trace.data;
- int i, retval;
-- uint32_t breakpoint_pc;
-+ uint32_t breakpoint_pc = 0;
- struct arm_instruction instruction;
- uint32_t current_pc = 0; /* initialized when address determined */
-
+++ /dev/null
-force gnu99
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- configure.in | 1 +
- 1 file changed, 1 insertion(+)
-
-Index: b/configure.in
-===================================================================
---- a/configure.in
-+++ b/configure.in
-@@ -28,6 +28,7 @@ AC_DISABLE_SHARED
- AC_PROG_LIBTOOL
- AC_SUBST(LIBTOOL_DEPS)
-
-+CFLAGS="$CFLAGS -std=gnu99"
-
- dnl configure checks required for Jim files (these are obsolete w/ C99)
- AC_C_CONST
+++ /dev/null
-force jimtcl to build static
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- jimtcl/auto.def | 5 -----
- 1 file changed, 5 deletions(-)
-
-Index: b/jimtcl/auto.def
-===================================================================
---- a/jimtcl/auto.def
-+++ b/jimtcl/auto.def
-@@ -148,13 +148,8 @@ if {[opt-bool references]} {
- msg-result "Enabling references"
- define JIM_REFERENCES
- }
--if {[opt-bool shared with-jim-shared]} {
-- msg-result "Building shared library"
-- define JIM_LIBTYPE shared
--} else {
- msg-result "Building static library"
- define JIM_LIBTYPE static
--}
- if {[opt-bool install-jim]} {
- define install_jim 1
- } else {
+++ /dev/null
-[PATCH] don't force library search path / rpath settings
-
-openocd adds -L$exec_prefix/lib -Wl,rpath,$exec_prefix/lib to the compile
-LDFLAGS if it isn't installed into /usr/local, which breaks cross compilation
-as the compiler ends up using host libraries.
----
- configure.in | 17 -----------------
- 1 file changed, 17 deletions(-)
-
-Index: openocd-0.5.0/configure.in
-===================================================================
---- openocd-0.5.0.orig/configure.in
-+++ openocd-0.5.0/configure.in
-@@ -174,23 +174,6 @@
- # Let make expand exec_prefix.
- test x"$OCDxprefix" = xNONE && OCDxprefix="$OCDprefix"
-
--# what matters is the "exec-prefix"
--if test "$OCDxprefix" != "$ac_default_prefix"
--then
-- # We are installing in a non-standard place
-- # Nonstandard --prefix and/or --exec-prefix
-- # We have an override of some sort.
-- # use build specific install library dir
--
-- LDFLAGS="$LDFLAGS -L$OCDxprefix/lib"
-- # RPATH becomes an issue on Linux only
-- if test $host_os = linux-gnu || test $host_os = linux ; then
-- LDFLAGS="$LDFLAGS -Wl,-rpath,$OCDxprefix/lib"
-- fi
-- # The "INCDIR" is also usable
-- CFLAGS="$CFLAGS -I$includedir"
--fi
--
- AC_ARG_WITH(ftd2xx,
- AS_HELP_STRING([--with-ftd2xx=<PATH>],[This option has been removed.]),
- [
+++ /dev/null
-Backport from openocd commit 737a52d7b22b1774acc5d20f9bd25000a70ac116
-Fix for automake 1.11.2+
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
-
-diff -Nura openocd-0.5.0/src/jtag/drivers/Makefile.am openocd-0.5.0.automake/src/jtag/drivers/Makefile.am
---- openocd-0.5.0/src/jtag/drivers/Makefile.am 2011-08-09 02:34:19.000000000 -0300
-+++ openocd-0.5.0.automake/src/jtag/drivers/Makefile.am 2012-05-01 13:57:01.007561480 -0300
-@@ -5,7 +5,8 @@
- libocdjtagdrivers_la_SOURCES = \
- $(DRIVERFILES)
-
--nobase_dist_pkglib_DATA =
-+ocddatadir = $(pkglibdir)
-+nobase_dist_ocddata_DATA =
-
- ULINK_FIRMWARE = $(srcdir)/OpenULINK
-
-@@ -64,7 +65,7 @@
- endif
- if ULINK
- DRIVERFILES += ulink.c
--nobase_dist_pkglib_DATA += $(ULINK_FIRMWARE)/ulink_firmware.hex
-+nobase_dist_ocddata_DATA += $(ULINK_FIRMWARE)/ulink_firmware.hex
- endif
- if VSLLINK
- DRIVERFILES += vsllink.c
-diff -Nura openocd-0.5.0/src/target/Makefile.am openocd-0.5.0.automake/src/target/Makefile.am
---- openocd-0.5.0/src/target/Makefile.am 2011-08-09 02:34:19.000000000 -0300
-+++ openocd-0.5.0.automake/src/target/Makefile.am 2012-05-01 13:57:01.934567076 -0300
-@@ -165,7 +165,7 @@
- avr32_mem.h \
- avr32_regs.h
-
--nobase_dist_pkglib_DATA =
--nobase_dist_pkglib_DATA += ecos/at91eb40a.elf
-+ocddatadir = $(pkglibdir)
-+nobase_dist_ocddata_DATA = ecos/at91eb40a.elf
-
- MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-# Locally computed:
-sha256 0bc122f98a6cd68c4392f6265d480b0e875ff54203ec05a5a52d23900903a78d openocd-0.5.0.tar.bz2
+# From http://sourceforge.net/projects/openocd/files/openocd/0.8.0/
+sha1 10bf9eeb54e03083cb1a101785b2d69fbdf18f31 openocd-0.8.0.tar.bz2
+md5 6d83c34763a5f1d1ac7ad83c5a11f4fb openocd-0.8.0.tar.bz2
#
################################################################################
-OPENOCD_VERSION = 0.5.0
+OPENOCD_VERSION = 0.8.0
OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
OPENOCD_SITE = http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)
-OPENOCD_LICENSE = GPLv2+
-OPENOCD_LICENSE_FILES = COPYING
-OPENOCD_AUTORECONF = YES
+OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
+
OPENOCD_CONF_OPTS = \
--oldincludedir=$(STAGING_DIR)/usr/include \
--includedir=$(STAGING_DIR)/usr/include \
--disable-doxygen-html \
+ --with-jim-shared=no \
+ --disable-shared \
--enable-dummy
-OPENOCD_DEPENDENCIES = libusb-compat
+# Rely on the Config.in options of each individual adapter selecting
+# the dependencies they need.
+
+OPENOCD_DEPENDENCIES = \
+ $(if $(BR2_PACKAGE_LIBFTDI),libftdi) \
+ $(if $(BR2_PACKAGE_LIBUSB),libusb) \
+ $(if $(BR2_PACKAGE_LIBUSB_COMPAT),libusb-compat) \
+ $(if $(BR2_PACKAGE_LIBHID),libhid)
# Adapters
-ifeq ($(BR2_PACKAGE_OPENOCD_FT2XXX),y)
-OPENOCD_CONF_OPTS += --enable-ft2232_libftdi
-OPENOCD_DEPENDENCIES += libftdi
-endif
-
-ifeq ($(BR2_PACKAGE_OPENOCD_JLINK),y)
-OPENOCD_CONF_OPTS += --enable-jlink
-endif
-
-ifeq ($(BR2_PACKAGE_OPENOCD_VSLLINK),y)
-OPENOCD_CONF_OPTS += --enable-vsllink
-endif
-
-HOST_OPENOCD_DEPENDENCIES = host-libusb-compat host-libftdi
-
-HOST_OPENOCD_CONF_OPTS = \
- --disable-doxygen-html \
- --enable-dummy \
- --enable-ft2232_libftdi \
- --enable-jlink \
- --enable-vsllink
+OPENOCD_CONF_OPTS += \
+ $(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink) \
+ $(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2) \
+ $(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm) \
+ $(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous) \
+ $(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice) \
+ $(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink) \
+ $(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog) \
+ $(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew) \
+ $(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap) \
+ $(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport) \
+ $(if $(BR2_PACKAGE_OPENOCD_FT2XXX),--enable-legacy-ft2232_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi) \
+ $(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb_blaster_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel) \
+ $(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master) \
+ $(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000) \
+ $(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx) \
+ $(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200) \
+ $(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio) \
+ $(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012) \
+ $(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag_ftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate) \
+ $(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio)
+
+# Enable all configuration options for host build.
+#
+# Note that deprecated options have been removed. CMSIS_DAP needs
+# hidapi (currently not included in buildroot) and zy1000 stuff fails
+# to build, so they've been removed too.
+#
+HOST_OPENOCD_CONF_OPTS = \
+ --enable-ftdi \
+ --enable-stlink \
+ --enable-ti-icdi \
+ --enable-ulink \
+ --enable-usb-blaster-2 \
+ --enable-jlink \
+ --enable-osbdm \
+ --enable-opendous \
+ --enable-aice \
+ --enable-vsllink \
+ --enable-usbprog \
+ --enable-rlink \
+ --enable-armjtagew \
+ --enable-parport \
+ --enable-jtag_vpi \
+ --enable-usb_blaster_libftdi \
+ --enable-amtjtagaccel \
+ --enable-gw16012 \
+ --enable-presto_libftdi \
+ --enable-openjtag_ftdi \
+ --enable-buspirate \
+ --enable-sysfsgpio \
+ --oldincludedir=$(HOST_DIR)/usr/include \
+ --includedir=$(HOST_DIR)/usr/include \
+ --disable-doxygen-html \
+ --with-jim-shared=no \
+ --disable-shared \
+ --enable-dummy
+
+HOST_OPENOCD_DEPENDENCIES = host-libftdi host-libusb host-libusb-compat
$(eval $(autotools-package))
$(eval $(host-autotools-package))
projects / coffee / buildroot.git / commitdiff