source "package/sredird/Config.in"
source "package/statserial/Config.in"
source "package/sysstat/Config.in"
+source "package/ti-gfx/Config.in"
source "package/ti-utils/Config.in"
source "package/uboot-tools/Config.in"
source "package/udev/Config.in"
LIBEGL_DEPENDENCIES += rpi-userland
endif
+ifeq ($(BR2_PACKAGE_TI_GFX),y)
+LIBEGL_DEPENDENCIES += ti-gfx
+endif
+
ifeq ($(LIBEGL_DEPENDENCIES),)
define LIBEGL_CONFIGURE_CMDS
echo "No libEGL implementation selected. Configuration error."
LIBGLES_DEPENDENCIES += rpi-userland
endif
+ifeq ($(BR2_PACKAGE_TI_GFX),y)
+LIBGLES_DEPENDENCIES += ti-gfx
+endif
+
ifeq ($(LIBGLES_DEPENDENCIES),)
define LIBGLES_CONFIGURE_CMDS
echo "No libGLES implementation selected. Configuration error."
--- /dev/null
+config BR2_PACKAGE_TI_GFX
+ bool "ti-gfx"
+ select BR2_PACKAGE_HAS_OPENGL_EGL
+ select BR2_PACKAGE_HAS_OPENGL_ES
+ select BR2_PACKAGE_HAS_POWERVR
+ depends on BR2_LINUX_KERNEL && BR2_TOOLCHAIN_USES_GLIBC && BR2_arm
+ help
+ Graphics libraries for TI boards.
+
+ http://downloads.ti.com/dsps/dsps_public_sw/gfxsdk/
+
+if BR2_PACKAGE_TI_GFX
+
+config BR2_PACKAGE_TI_GFX_DEBUG
+ bool "enable debug support"
+ help
+ Turns on debugging in the kernel module, install libraries built with
+ debugging enabled, installs various tests and installs esrev script.
+
+config BR2_PACKAGE_TI_GFX_DEMOS
+ bool "install demos"
+ default y
+ help
+ Install the OGLES2ChameleonMan and OGLES2MagicLantern demos
+
+config BR2_PACKAGE_TI_GFX_EGLIMAGE
+ bool "install eglimage version of libraries"
+ help
+ Installs OpenGL libaries which support the eglimage api.
+
+config BR2_PACKAGE_TI_GFX_HARD_FLOAT
+ bool "use hard float binaries"
+ help
+ Install hard float binaries (required if using a hard float toolchain)
+
+choice
+ prompt "Target"
+ default BR2_PACKAGE_TI_GFX_ES3
+ help
+ Select the SOC for which you would like to install drivers. Please use the
+ chart at
+ http://processors.wiki.ti.com/index.php/OMAP35x_Graphics_SDK_Getting_Started_Guide
+
+config BR2_PACKAGE_TI_GFX_ES3
+ bool "es3.x (OMAP35xx, AM35xx Rev 3.1+)"
+ help
+ OMAP35xx, AM35xx Rev 3.1+
+
+config BR2_PACKAGE_TI_GFX_ES5
+ bool "es5.x (AM37xx, DM37xx)"
+ help
+ AM37xx, DM37xx
+
+config BR2_PACKAGE_TI_GFX_ES6
+ bool "es6.x (AM387x, DMA814x, AM389x, DM816x)"
+ help
+ AM387x, DM814x, AM389x, DM816x
+
+config BR2_PACKAGE_TI_GFX_ES8
+ bool "es8.x (AM335x)"
+ help
+ AM335x
+
+endchoice
+
+endif
+
+comment "ti-gfx requires an eglibc/glibc based toolchain and the linux kernel"
+ depends on !(BR2_LINUX_KERNEL && BR2_TOOLCHAIN_USES_GLIBC) && BR2_arm
--- /dev/null
+#!/bin/sh
+
+start() {
+ echo "ti-gfx: starting pvr driver"
+
+ BITSPERPIXEL="$(fbset | awk '/geom/ {print $6}')"
+ YRES="$(fbset | awk '/geom/ {print $3}')"
+ # Set RGBA ordering to something the drivers like
+ if [ "$BITSPERPIXEL" = "32" ] ; then
+ fbset -rgba 8/16,8/8,8/0,8/24
+ fi
+ # Try to enable triple buffering when there's enough VRAM
+ fbset -vyres $(( YRES*3 ))
+
+ modprobe pvrsrvkm
+ modprobe omaplfb
+ modprobe bufferclass_ti
+
+ pvr_maj=$(awk '$2=="pvrsrvkm" { print $1; }' /proc/devices)
+ rm -f /dev/pvrsrvkm
+
+ mknod /dev/pvrsrvkm c $pvr_maj 0
+ chmod 600 /dev/pvrsrvkm
+
+ if ! /usr/bin/pvrsrvctl --start --no-module; then
+ echo "ti-gfx: unable to start server"
+ fi
+}
+
+stop() {
+ echo "ti-gfx: stopping pvr driver"
+
+ rmmod bufferclass_ti
+ rmmod omaplfb
+ rmmod pvrsrvkm
+}
+
+case "$1" in
+start)
+ start
+;;
+stop)
+ stop
+;;
+restart)
+ stop
+ start
+;;
+*)
+ echo "ti-gfx: Please use start, stop, or restart."
+ exit 1
+;;
+esac
--- /dev/null
+prefix=/usr/
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: egl
+Description: TI Graphics SDK implementation of EGL
+Version: 1.9.2188537
+Requires:
+Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
+Cflags: -I{includedir}/EGL/ -I${includedir}
--- /dev/null
+#!/bin/sh
+
+# Debug script to determine proper ES revision for the current board. The
+# pvrsrvkm module must be insmoded before attempting to get the es rev.
+
+machine_id() { # return the machine ID
+ awk 'BEGIN { FS=": " } /Hardware/ \
+ { gsub(" ", "_", $2); print tolower($2) } ' </proc/cpuinfo
+}
+
+if [ "$(machine_id)" = "ti8168evm" ] ; then
+ CPUTYPE=TI816x
+elif [ "$(machine_id)" = "am335xevm" ] ; then
+ CPUTYPE=TI33XX
+else
+ CPUTYPE=$(devmem 0x4800244c | sed -e 's/0x00005C00/OMAP3503/' \
+ -e 's/0x00001C00/OMAP3515/' \
+ -e 's/0x00004C00/OMAP3525/' \
+ -e 's/0x00000C00/OMAP3530/' \
+ -e 's/0x00005E00/OMAP3503/' \
+ -e 's/0x00001E00/OMAP3515/' \
+ -e 's/0x00004E00/OMAP3525/' \
+ -e 's/0x00000E00/OMAP3530/' \
+ -e 's/0x00000CC0/OMAP3530/' )
+ if [[ "$(echo $CPUTYPE | grep OMAP)" == "" ]]; then
+ echo "Unable to determine CPU type"
+ exit 1
+ fi
+fi
+
+case $CPUTYPE in
+"OMAP3530")
+ devmem 0x48004B48 w 0x2
+ devmem 0x48004B10 w 0x1
+ devmem 0x48004B00 w 0x2
+
+ ES_REVISION="$(devmem 0x50000014 | sed -e s:0x00010205:5: \
+ -e s:0x00010201:3: -e s:0x00010003:2:)"
+ ;;
+"TI33XX")
+ devmem 0x44e01104 w 0x0
+ devmem 0x44e00904 w 0x2
+
+ ES_REVISION="$(devmem 0x56000014 | sed -e s:0x00010205:8:)"
+ ;;
+"TI816x")
+ devmem 0x48180F04 w 0x0
+ devmem 0x48180900 w 0x2
+ devmem 0x48180920 w 0x2
+
+ ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+ ;;
+*)
+ echo Unable to determine SGX hardware
+ exit 2
+ ;;
+esac
+
+echo $ES_REVISION
--- /dev/null
+prefix=/usr
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: glesv2
+Description: TI Graphics SDK implementation of OpenGL ESv2
+Version: 1.9.2188537
+Requires:
+Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
+Cflags: -I${includedir}/GLES2
--- /dev/null
+[default]
+WindowSystem=libpvrPVR2D_FRONTWSEGL.so
--- /dev/null
+Patch to add modules_install target to the modules makefile. This makes
+installation a little easier.
+
+Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
+----
+Index: ti-gfx-4_09_00_01/GFX_Linux_KM/Makefile
+===================================================================
+--- ti-gfx-4_09_00_01.orig/GFX_Linux_KM/Makefile 2013-03-07 11:00:11.000000000 -0600
++++ ti-gfx-4_09_00_01/GFX_Linux_KM/Makefile 2013-05-23 01:36:29.356676281 -0500
+@@ -479,6 +479,9 @@
+ all:
+ $(MAKE) -C $(KERNELDIR) M=`pwd` $*
+
++install:
++ $(MAKE) -C $(KERNELDIR) M=`pwd` modules_install
++
+ clean:
+ @find . -name "*.o" -exec rm -r {} \;
+ @find . -name "*.ko" -exec rm -r {} \;
--- /dev/null
+This patch adjusts the omap3630 portion of the powervr driver to use the new
+clk kernel api.
+
+Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
+----
+Index: ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c
+===================================================================
+--- ti-gfx-4_09_00_01.orig/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2013-06-28 13:44:06.352701522 -0500
++++ ti-gfx-4_09_00_01/GFX_Linux_KM/services4/system/omap3630/sysutils_linux.c 2013-06-28 13:45:12.364702727 -0500
+@@ -153,6 +153,49 @@
+ psTimingInfo->ui32ActivePowManLatencyms = SYS_SGX_ACTIVE_POWER_LATENCY_MS;
+ }
+
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)
++int clk_disable_unprepare(struct clk *clk)
++{
++ return clk_disable(clk);
++}
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
++int clk_disable_unprepare(struct clk *clk)
++{
++ res = clk_disable(clk);
++ if (res < 0)
++ return res;
++
++ res = clk_unprepare(clk);
++ if (ret < 0)
++ return res;
++
++ return 0;
++}
++#endif
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)
++int clk_prepare_enable(struct clk *clk)
++{
++ return clk_enable(clk);
++}
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
++int clk_prepare_enable(struct clk *clk)
++{
++ res = clk_prepare(clk);
++ if (ret < 0)
++ return res;
++
++ res = clk_enable(clk);
++ if (res < 0) {
++ clk_unprepare(clk);
++ return res;
++ }
++
++ return 0;
++}
++#endif
++
+ PVRSRV_ERROR EnableSGXClocks(SYS_DATA *psSysData)
+ {
+ #if !defined(NO_HARDWARE)
+@@ -167,19 +210,19 @@
+
+ PVR_DPF((PVR_DBG_MESSAGE, "EnableSGXClocks: Enabling SGX Clocks"));
+
+- res=clk_enable(psSysSpecData->psSGX_FCK);
++ res=clk_prepare_enable(psSysSpecData->psSGX_FCK);
+ if (res < 0)
+ {
+ PVR_DPF((PVR_DBG_ERROR, "EnableSGXClocks: Couldn't enable SGX functional clock (%d)", res));
+ return PVRSRV_ERROR_UNABLE_TO_ENABLE_CLOCK;
+ }
+
+- res=clk_enable(psSysSpecData->psSGX_ICK);
++ res=clk_prepare_enable(psSysSpecData->psSGX_ICK);
+ if (res < 0)
+ {
+ PVR_DPF((PVR_DBG_ERROR, "EnableSGXClocks: Couldn't enable SGX interface clock (%d)", res));
+
+- clk_disable(psSysSpecData->psSGX_FCK);
++ clk_disable_unprepare(psSysSpecData->psSGX_FCK);
+ return PVRSRV_ERROR_UNABLE_TO_ENABLE_CLOCK;
+ }
+
+@@ -233,7 +276,6 @@
+ return PVRSRV_OK;
+ }
+
+-
+ IMG_VOID DisableSGXClocks(SYS_DATA *psSysData)
+ {
+ #if !defined(NO_HARDWARE)
+@@ -246,9 +288,9 @@
+
+ PVR_DPF((PVR_DBG_MESSAGE, "DisableSGXClocks: Disabling SGX Clocks"));
+
+- clk_disable(psSysSpecData->psSGX_FCK);
++ clk_disable_unprepare(psSysSpecData->psSGX_FCK);
+
+- clk_disable(psSysSpecData->psSGX_ICK);
++ clk_disable_unprepare(psSysSpecData->psSGX_ICK);
+
+ // SysDisableSGXInterrupts(psSysData);
+
+@@ -374,14 +416,14 @@
+ rate = clk_get_rate(psSysSpecData->psGPT11_FCK);
+ PVR_TRACE(("GPTIMER11 clock is %dMHz", HZ_TO_MHZ(rate)));
+
+- res = clk_enable(psSysSpecData->psGPT11_FCK);
++ res = clk_prepare_enable(psSysSpecData->psGPT11_FCK);
+ if (res < 0)
+ {
+ PVR_DPF((PVR_DBG_ERROR, "EnableSystemClocks: Couldn't enable GPTIMER11 functional clock (%d)", res));
+ goto ExitError;
+ }
+
+- res = clk_enable(psSysSpecData->psGPT11_ICK);
++ res = clk_prepare_enable(psSysSpecData->psGPT11_ICK);
+ if (res < 0)
+ {
+ PVR_DPF((PVR_DBG_ERROR, "EnableSystemClocks: Couldn't enable GPTIMER11 interface clock (%d)", res));
+@@ -444,9 +486,9 @@
+
+ ExitDisableGPT11ICK:
+ #if defined(PVR_OMAP3_TIMING_PRCM)
+- clk_disable(psSysSpecData->psGPT11_ICK);
++ clk_disable_unprepare(psSysSpecData->psGPT11_ICK);
+ ExitDisableGPT11FCK:
+- clk_disable(psSysSpecData->psGPT11_FCK);
++ clk_disable_unprepare(psSysSpecData->psGPT11_FCK);
+ ExitError:
+ #endif
+ eError = PVRSRV_ERROR_CLOCK_REQUEST_FAILED;
+@@ -490,9 +532,9 @@
+ #endif
+
+ #if defined(PVR_OMAP3_TIMING_PRCM)
+- clk_disable(psSysSpecData->psGPT11_ICK);
++ clk_disable_unprepare(psSysSpecData->psGPT11_ICK);
+
+- clk_disable(psSysSpecData->psGPT11_FCK);
++ clk_disable_unprepare(psSysSpecData->psGPT11_FCK);
+ #endif
+ }
+ #endif
--- /dev/null
+###############################################################################
+#
+# ti-gfx
+#
+###############################################################################
+
+TI_GFX_VERSION = 4_09_00_01
+TI_GFX_SO_VERSION = 1.9.2188537
+
+ifeq ($(BR2_PACKAGE_TI_GFX_HARD_FLOAT),y)
+TI_GFX_SOURCE = Graphics_SDK_setuplinux_$(TI_GFX_VERSION)_hardfp_minimal_demos.bin
+else
+TI_GFX_SOURCE = Graphics_SDK_setuplinux_$(TI_GFX_VERSION)_minimal_demos.bin
+endif
+
+TI_GFX_SITE = http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/$(TI_GFX_VERSION)/exports/
+TI_GFX_LICENSE = Technology / Software Publicly Available
+TI_GFX_LICENSE_FILES = TSPA.txt
+TI_GFX_INSTALL_STAGING = YES
+
+TI_GFX_DEPENDENCIES = linux
+
+ifeq ($(BR2_PACKAGE_TI_GFX_ES3),y)
+TI_GFX_OMAPES = 3.x
+TI_GFX_PLATFORM = omap3
+endif
+ifeq ($(BR2_PACKAGE_TI_GFX_ES5),y)
+TI_GFX_OMAPES = 5.x
+TI_GFX_PLATFORM = omap3630
+endif
+ifeq ($(BR2_PACKAGE_TI_GFX_ES6),y)
+TI_GFX_OMPAES = 6.x
+TI_GFX_PLATFORM = ti81xx
+endif
+ifeq ($(BR2_PACKAGE_TI_GFX_ES8),y)
+TI_GFX_OMAPES = 8.x
+TI_GFX_PLATFORM = ti335x
+endif
+
+ifeq ($(BR2_PACKAGE_TI_GFX_DEBUG),y)
+TI_GFX_DEBUG_LIB = dbg
+TI_GFX_DEBUG_KM = debug
+else
+TI_GFX_DEBUG_LIB = rel
+TI_GFX_DEBUG_KM = release
+endif
+
+TI_GFX_BIN_PATH = gfx_$(TI_GFX_DEBUG_LIB)_es$(TI_GFX_OMAPES)
+
+TI_GFX_KM_MAKE_OPTS = \
+ $(LINUX_MAKE_FLAGS) \
+ BUILD=$(TI_GFX_DEBUG_KM) \
+ TI_PLATFORM=$(TI_GFX_PLATFORM) \
+ OMAPES=$(TI_GFX_OMAPES) \
+ SUPPORT_XORG=0 \
+ KERNELDIR=$(LINUX_DIR)
+
+TI_GFX_DEMO_MAKE_OPTS = \
+ PLATFORM=LinuxARMV7 \
+ X11BUILD=0 \
+ PLAT_CC="$(TARGET_CC)" \
+ PLAT_CPP="$(TARGET_CXX)" \
+ PLAT_AR="$(TARGET_AR)"
+
+# The only required binary is pvrsrvctl all others are optional
+TI_GFX_BIN = pvrsrvctl
+
+ifeq ($(BR2_PACKAGE_TI_GFX_DEBUG),y)
+TI_GFX_BIN += \
+ eglinfo ews_server ews_server_es2 ews_test_gles1 ews_test_gles2 \
+ ews_test_swrender gles1test1 gles2test1 pvr2d_test services_test \
+ sgx_blit_test sgx_clipblit_test sgx_flip_test sgx_init_test \
+ sgx_render_flip_test xeglinfo xgles1test1 xgles2test1 xmultiegltest
+endif
+
+TI_GFX_LIBS = \
+ libews libpvr2d libpvrEWS_WSEGL libpvrPVR2D_BLITWSEGL libpvrPVR2D_DRIWSEGL \
+ libpvrPVR2D_FLIPWSEGL libpvrPVR2D_FRONTWSEGL libpvrPVR2D_LINUXFBWSEGL \
+ libPVRScopeServices libsrv_init libsrv_um libusc pvr_drv
+
+TI_GFX_EGLIMAGE_LIBS = \
+ libEGL libGLES_CM libGLESv2 libglslcompiler libIMGegl
+
+TI_GFX_DEMOS = ChameleonMan MagicLantern
+TI_GFX_DEMOS_LOC = GFX_Linux_SDK/OGLES2/SDKPackage/Demos
+TI_GFX_DEMOS_MAKE_LOC = OGLES2/Build/LinuxGeneric
+TI_GFX_DEMOS_BIN_LOC = OGLES2/Build/LinuxARMV7/ReleaseRaw/
+
+TI_GFX_HDR_DIRS = OGLES2/EGL OGLES2/EWS OGLES2/GLES2 OGLES2/KHR \
+ OGLES/GLES bufferclass_ti/ pvr2d/ wsegl/
+
+define TI_GFX_EXTRACT_CMDS
+ $(RM) -rf $(TI_GFX_DIR)
+ chmod +x $(DL_DIR)/$(TI_GFX_SOURCE)
+ printf "Y\nY\n qY\n\n" | $(DL_DIR)/$(TI_GFX_SOURCE) \
+ --prefix $(@D) \
+ --mode console
+endef
+
+define TI_GFX_BUILD_KM_CMDS
+ $(MAKE) $(TI_GFX_KM_MAKE_OPTS) -C $(@D)/GFX_Linux_KM all
+endef
+
+ifeq ($(BR2_PACKAGE_TI_GFX_DEMOS),y)
+define TI_GFX_BUILD_DEMO_CMDS
+ $(foreach demo, $(TI_GFX_DEMOS), \
+ $(TARGET_MAKE_ENV) $(MAKE1) -C \
+ $(@D)/$(TI_GFX_DEMOS_LOC)/$(demo)/$(TI_GFX_DEMOS_MAKE_LOC) \
+ $(TI_GFX_DEMO_MAKE_OPTS) all
+ )
+endef
+endif
+
+define TI_GFX_BUILD_CMDS
+ $(TI_GFX_BUILD_KM_CMDS)
+ $(TI_GFX_BUILD_DEMO_CMDS)
+endef
+
+# Install libs
+# argument 1 is the location to install to (e.g. STAGING_DIR, TARGET_DIR)
+define TI_GFX_INSTALL_LIBS
+ $(foreach lib,$(TI_GFX_LIBS),
+ $(INSTALL) -D -m 0644 $(@D)/$(TI_GFX_BIN_PATH)/$(lib).so \
+ $(1)/usr/lib/$(lib).so.$(TI_GFX_SO_VERSION); \
+ ln -sf $(lib).so.$(TI_GFX_SO_VERSION) \
+ $(1)/usr/lib/$(lib).so
+ )
+ $(foreach lib,$(TI_GFX_EGLIMAGE_LIBS),
+ $(if $(BR2_PACKAGE_TI_GFX_EGLIMAGE),
+ $(INSTALL) -D -m 0644 $(@D)/$(TI_GFX_BIN_PATH)/$(lib)_eglimage.so \
+ $(1)/usr/lib/$(lib).so.$(TI_GFX_SO_VERSION);
+ ,
+ $(INSTALL) -D -m 0644 $(@D)/$(TI_GFX_BIN_PATH)/$(lib).so \
+ $(1)/usr/lib/$(lib).so.$(TI_GFX_SO_VERSION);
+ )
+ ln -sf $(lib).so.$(TI_GFX_SO_VERSION) \
+ $(1)/usr/lib/$(lib).so
+ )
+endef
+
+define TI_GFX_INSTALL_STAGING_CMDS
+ $(foreach incdir,$(TI_GFX_HDR_DIRS),
+ $(INSTALL) -d $(STAGING_DIR)/usr/include/$(notdir $(incdir)); \
+ $(INSTALL) -D -m 0644 $(@D)/include/$(incdir)/*.h \
+ $(STAGING_DIR)/usr/include/$(notdir $(incdir))/
+ )
+ $(call TI_GFX_INSTALL_LIBS,$(STAGING_DIR))
+
+ $(INSTALL) -D -m 0644 package/ti-gfx/egl.pc \
+ $(STAGING_DIR)/usr/lib/pkgconfig/egl.pc
+ $(INSTALL) -D -m 0644 package/ti-gfx/glesv2.pc \
+ $(STAGING_DIR)/usr/lib/pkgconfig/glesv2.pc
+endef
+
+define TI_GFX_INSTALL_KM_CMDS
+ $(MAKE) $(TI_GFX_KM_MAKE_OPTS) -C $(@D)/GFX_Linux_KM install
+endef
+
+define TI_GFX_INSTALL_BINS_CMDS
+ $(foreach bin,$(TI_GFX_BIN),
+ $(INSTALL) -D -m 0755 $(@D)/$(TI_GFX_BIN_PATH)/$(bin) \
+ $(TARGET_DIR)/usr/bin/$(bin)
+ )
+ $(if $(BR2_PACKAGE_TI_GFX_DEBUG),
+ $(INSTALL) -D -m 0755 package/ti-gfx/esrev.sh \
+ $(TARGET_DIR)/usr/sbin/esrev
+ )
+endef
+
+define TI_GFX_INSTALL_CONF_CMDS
+ # libs use the following file for configuration.
+ $(INSTALL) -D -m 0644 package/ti-gfx/powervr.ini \
+ $(TARGET_DIR)/etc/powervr.ini
+endef
+
+ifeq ($(BR2_PACKAGE_TI_GFX_DEMOS),y)
+define TI_GFX_INSTALL_DEMOS_CMDS
+ $(foreach demo,$(TI_GFX_DEMOS),
+ $(INSTALL) -D -m 0755 \
+ $(@D)/$(TI_GFX_DEMOS_LOC)/$(demo)/$(TI_GFX_DEMOS_BIN_LOC)/OGLES2$(demo) \
+ $(TARGET_DIR)/usr/bin/OGLES2$(demo)
+ )
+endef
+endif
+
+define TI_GFX_INSTALL_INIT_SYSV
+ $(INSTALL) -D -m 0755 package/ti-gfx/S80ti-gfx \
+ $(TARGET_DIR)/etc/init.d/S80ti-gfx
+endef
+
+define TI_GFX_INSTALL_TARGET_CMDS
+ $(TI_GFX_INSTALL_KM_CMDS)
+ $(TI_GFX_INSTALL_BINS_CMDS)
+ $(call TI_GFX_INSTALL_LIBS,$(TARGET_DIR))
+ $(TI_GFX_INSTALL_CONF_CMDS)
+ $(TI_GFX_INSTALL_DEMOS_CMDS)
+endef
+
+$(eval $(generic-package))
projects / coffee / buildroot.git / commitdiff