configs/qemu: bump to the latest kernel version

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.9.6   2.6.0           YES     OK (3)
arm_versatile           4.9.6   2.5.0           YES     OK
arm_versatile_nommu     4.4.45  2.5.0           YES     OK
arm_vexpress            4.9.6   2.5.0           YES     OK
m68k_mcf5208            4.8.17  2.5.0           YES     OK (6)
m68k_q800               4.9.6   q800-v2.4.0     NO (2)  OK
microblazebe            4.9.6   2.5.0           YES     OK
microblazeel            4.9.6   2.5.0           YES     OK
mips32r2el_malta        4.9.6   2.5.0           YES     OK
mips32r2_malta          4.9.6   2.5.0           YES     OK
mips32r6el_malta        4.9.6   2.6.0           YES     OK (3)
mips32r6_malta          4.9.6   2.6.0           YES     OK (3)
mips64el_malta          4.9.6   2.5.0           YES     OK
mips64_malta            4.8.17  2.5.0           YES     OK (6)
mips64r6el_malta        4.9.6   2.7.0           YES     OK (3)(4)
mips64r6_malta          4.9.6   2.7.0           YES     OK (3)(4)
nios2-10m50             4.9.6   2.9.0           NO      OK
or1k                    4.9.6   2.5.0           NO      OK
ppc_g3beige             4.9.6   2.5.0           YES     OK
ppc_mpc8544ds           4.9.6   2.5.0           YES     OK
ppc_virtex_ml507        4.9.6   2.5.0           NO      OK
ppc64_pseries           4.9.6   2.5.0           YES     OK
sh4                     4.9.6   2.5.0           YES     OK
sh4eb                   4.9.6   2.5.0           NO (1)  OK
sparc_ss10              4.9.6   2.5.0           YES     OK
sparc64_sun4u           4.9.6   2.5.0           YES     OK
sparc_sun4u             4.9.6   2.5.0           YES     OK
x86                     4.9.6   2.5.0           YES     OK
x86_64                  4.9.6   2.5.0           YES     OK
xtensa_lx60             4.8.17  2.6.0           YES     OK (6)
xtensa_lx60_nommu       4.8.17  2.6.0           YES     OK (5)

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

diff --git a/board/qemu/aarch64-virt/linux-4.8.config b/board/qemu/aarch64-virt/linux-4.9.config
similarity index 100%
rename from board/qemu/aarch64-virt/linux-4.8.config
rename to board/qemu/aarch64-virt/linux-4.9.config

diff --git a/board/qemu/arm-versatile/linux-4.8.config b/board/qemu/arm-versatile/linux-4.9.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-4.8.config
rename to board/qemu/arm-versatile/linux-4.9.config

diff --git a/board/qemu/m68k-q800/linux-4.8.config b/board/qemu/m68k-q800/linux-4.9.config
similarity index 100%
rename from board/qemu/m68k-q800/linux-4.8.config
rename to board/qemu/m68k-q800/linux-4.9.config

diff --git a/board/qemu/microblazebe-mmu/linux-4.8.config b/board/qemu/microblazebe-mmu/linux-4.9.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.8.config
rename to board/qemu/microblazebe-mmu/linux-4.9.config

diff --git a/board/qemu/microblazeel-mmu/linux-4.8.config b/board/qemu/microblazeel-mmu/linux-4.9.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.8.config
rename to board/qemu/microblazeel-mmu/linux-4.9.config

diff --git a/board/qemu/mips32r2-malta/linux-4.8.config b/board/qemu/mips32r2-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r2-malta/linux-4.8.config
rename to board/qemu/mips32r2-malta/linux-4.9.config

diff --git a/board/qemu/mips32r2el-malta/linux-4.8.config b/board/qemu/mips32r2el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r2el-malta/linux-4.8.config
rename to board/qemu/mips32r2el-malta/linux-4.9.config

diff --git a/board/qemu/mips32r6-malta/linux-4.8.config b/board/qemu/mips32r6-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r6-malta/linux-4.8.config
rename to board/qemu/mips32r6-malta/linux-4.9.config

diff --git a/board/qemu/mips32r6el-malta/linux-4.8.config b/board/qemu/mips32r6el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r6el-malta/linux-4.8.config
rename to board/qemu/mips32r6el-malta/linux-4.9.config

diff --git a/board/qemu/mips64el-malta/linux-4.8.config b/board/qemu/mips64el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.8.config
rename to board/qemu/mips64el-malta/linux-4.9.config

diff --git a/board/qemu/mips64r6-malta/linux-4.8.config b/board/qemu/mips64r6-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64r6-malta/linux-4.8.config
rename to board/qemu/mips64r6-malta/linux-4.9.config

diff --git a/board/qemu/mips64r6el-malta/linux-4.8.config b/board/qemu/mips64r6el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64r6el-malta/linux-4.8.config
rename to board/qemu/mips64r6el-malta/linux-4.9.config

diff --git a/board/qemu/ppc-g3beige/linux-4.8.config b/board/qemu/ppc-g3beige/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.8.config
rename to board/qemu/ppc-g3beige/linux-4.9.config

diff --git a/board/qemu/ppc-mpc8544ds/linux-4.8.config b/board/qemu/ppc-mpc8544ds/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.8.config
rename to board/qemu/ppc-mpc8544ds/linux-4.9.config

diff --git a/board/qemu/ppc-virtex-ml507/linux-4.8.config b/board/qemu/ppc-virtex-ml507/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.8.config
rename to board/qemu/ppc-virtex-ml507/linux-4.9.config

diff --git a/board/qemu/sh4-r2d/linux-4.8.config b/board/qemu/sh4-r2d/linux-4.9.config
similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.8.config
rename to board/qemu/sh4-r2d/linux-4.9.config

diff --git a/board/qemu/sh4eb-r2d/linux-4.8.config b/board/qemu/sh4eb-r2d/linux-4.9.config
similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.8.config
rename to board/qemu/sh4eb-r2d/linux-4.9.config

diff --git a/board/qemu/sparc-ss10/linux-4.8.config b/board/qemu/sparc-ss10/linux-4.9.config
similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.8.config
rename to board/qemu/sparc-ss10/linux-4.9.config

diff --git a/board/qemu/sparc64-sun4u/linux-4.8.config b/board/qemu/sparc64-sun4u/linux-4.9.config
similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.8.config
rename to board/qemu/sparc64-sun4u/linux-4.9.config

diff --git a/board/qemu/x86/linux-4.8.config b/board/qemu/x86/linux-4.8.config
deleted file mode 120000 (symlink)
index fca759e..0000000
--- a/board/qemu/x86/linux-4.8.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.8.config
\ No newline at end of file

diff --git a/board/qemu/x86/linux-4.9.config b/board/qemu/x86/linux-4.9.config
new file mode 120000 (symlink)
index 0000000..44b2fa1
--- /dev/null
+++ b/board/qemu/x86/linux-4.9.config
@@ -0,0 +1 @@
+../x86_64/linux-4.9.config
\ No newline at end of file

diff --git a/board/qemu/x86_64/linux-4.8.config b/board/qemu/x86_64/linux-4.9.config
similarity index 100%
rename from board/qemu/x86_64/linux-4.8.config
rename to board/qemu/x86_64/linux-4.9.config

diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig
index 242d3bf52cef0e909dbb6e2c921c237b86e120e4..23462ad563497bda76fa45a113c0b1d65e2a07f6 100644 (file)
--- a/configs/pc_x86_64_bios_defconfig
+++ b/configs/pc_x86_64_bios_defconfig
@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig
index 118cc5982bbdb9fd714a1292d02845cea2589906..136b7113876aa9cc8cd218795538ebe0a71c8b6b 100644 (file)
--- a/configs/pc_x86_64_efi_defconfig
+++ b/configs/pc_x86_64_efi_defconfig
@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index acde3547c88bfed38d34dfb8ebcb2d217f920cc2..222c69eb7b8af56984fbea6ce6306221409c67e3 100644 (file)
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config"

diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 452ed5f92e17df7a90f3db1782677ffaec639db9..afeef75c9cac5cbecee74bae54652144d7df8c26 100644 (file)
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"

diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig
index 49e4411de45f5146c574fb1e42509d42108596b2..6cc646b2667a243093d595642aab33dac88449d1 100644 (file)
--- a/configs/qemu_arm_versatile_nommu_defconfig
+++ b/configs/qemu_arm_versatile_nommu_defconfig
@@ -27,6 +27,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.22"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config"

diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index e841bac5d39851e6e5c2ac829b6031ed9abb7a1c..f8dd5a09c62f0a33f3199575accdeb0cadc35ab2 100644 (file)
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"

diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index c6c9098c259cbbdbab1861ee6d52c19baaabf494..a5ebf1539bd01b4cc8a8a5fda0838dc76b7c4b27 100644 (file)
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -15,7 +15,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y

diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index 1d59d7746ebeafbc3d522e72a66ed94e7e6a340b..7bba7ef11bb74fa524d3d0fc49cee06a4ee4ab37 100644 (file)
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 188304e6e9a2b0511830a74b6a690a9f8902edcb..3af8ad901526d2fa098f3dd73aa88491e8f4b489 100644 (file)
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 471d86ad302598d15537d7be0a347f6effb0767b..6bda8cc70fb7952d5eff33ad6465c675b993b4a7 100644 (file)
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig
index 16cc0ca585d91e6a30910bea538a7cc29f535553..efac1f2689d63e72b6ff3dca5271c5bce93cd56f 100644 (file)
--- a/configs/qemu_mips32r2_malta_defconfig
+++ b/configs/qemu_mips32r2_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig
index a66bdbda344aca0eeb812d37854f56ece46b49df..066c89779f009712d6482c4b70db1c14e431717b 100644 (file)
--- a/configs/qemu_mips32r2el_malta_defconfig
+++ b/configs/qemu_mips32r2el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig
index a74c10150232b77bbb43eaa90bed53c98a74436e..898477b38cfd71d5d6642eaa7dbffe456b68366d 100644 (file)
--- a/configs/qemu_mips32r6_malta_defconfig
+++ b/configs/qemu_mips32r6_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig
index 5202e2c462a4983ec45e5bd922b3c4db49cefddb..a082167c229e6cffe7b1a43204aa9e3326aaeac0 100644 (file)
--- a/configs/qemu_mips32r6el_malta_defconfig
+++ b/configs/qemu_mips32r6el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 92bacc07b6ac1babcd17a5a3969bd0d4d6c534d9..7c4006331c911e7e9f4cabe9eeccd517b7149c20 100644 (file)
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -15,7 +15,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y

diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index d3cac61c63df33823806744cb0ace89d0335dfd5..e95704569b20d53d2a1f85ac33304bdbad3ceec7 100644 (file)
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig
index c68d88779819f961d5b93a5e4a33ed0197b85394..dccdc169fabcc2c190d48a08d4dae35742262c98 100644 (file)
--- a/configs/qemu_mips64r6_malta_defconfig
+++ b/configs/qemu_mips64r6_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig
index c0ad30449f31294fb6c6b682966dfb61e5ca7daf..8bbc114ae6d7d824b694872c4e5f4682a1b36467 100644 (file)
--- a/configs/qemu_mips64r6el_malta_defconfig
+++ b/configs/qemu_mips64r6el_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig
index d6b3e1f29d8d3e6d5355a73bd940a9ae78472537..a04a156832b15620acf55cfd607910d8cf6b4bee 100644 (file)
--- a/configs/qemu_nios2_10m50_defconfig
+++ b/configs/qemu_nios2_10m50_defconfig
@@ -1,7 +1,7 @@
 BR2_nios2=y
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.5"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_DEFCONFIG="10m50"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment"
 BR2_TARGET_ROOTFS_INITRAMFS=y

diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig
index b2527b4c85b4e9c0d6170bebc11085c016436364..4f70285d41699f9781e086d57c04e80b69eb9098 100644 (file)
--- a/configs/qemu_or1k_defconfig
+++ b/configs/qemu_or1k_defconfig
@@ -14,6 +14,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"

diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index 810f6e6e18b03b7c1363addc18404e9b922fa5ba..c15de3bc487bf204350995582e16d5cbbd829329 100644 (file)
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index d0cd2cc2a859452e612f6e406ad11d0e0dffd7b3..58d4dfc817cc36a4f457c0ccb5cc3a0d9f892ab7 100644 (file)
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index ed10eeeea2c61461a67e67edb2ed44d374f2f25b..0252da728d6aaa00ddcb162b85f9433050ee76ae 100644 (file)
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index c8571b6a74409de30a686f1ee1a1f634958c7207..84cb329872df30e50c0bd6c9e30075019a8404eb 100644 (file)
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.9.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index 11c4d26a19adca02e81d074268dbfefb2d171e87..becce23ee19c9bcbade85d2145528724af542125 100644 (file)
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.9.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig
index e88b63819384882e565c5299ea9d7f94d5be9510..61d9ac9dde304aaae327d23fe9753172d8631aa9 100644 (file)
--- a/configs/qemu_sh4eb_r2d_defconfig
+++ b/configs/qemu_sh4eb_r2d_defconfig
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.9.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index a4c0e96b361147967aeb0daa3e5f41ca3dcfd7b8..ef2d22f7962b5a6e653bf444e89b8f362a1e1dec 100644 (file)
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config"

diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 0f3b474b14839d4ed39c2c9b267d2c342a3eaf75..1d6c951737d617b635d5f704cfa7d18de1e6be45 100644 (file)
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config"

diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 8284d3fc5bfc2a9e0cf21245b3e75330ea83c14e..7002d5edfe07af0aec493b8b800c67071828100c 100644 (file)
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"

diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 0a4c6a823723217a03abedacf7a62d8389139711..99ca6040068b249921393fc1c3f71f90b11f9dea 100644 (file)
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config"

diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index 020ea0cc75be5b9cc3bd912c8220eec42427e8e5..54d844d76532c8ac079dabd78cdb25e9d54ff8d5 100644 (file)
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -16,13 +16,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4,8 series
+# Linux headers same as kernel, a 4.8 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y

diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index b2ff47942aea729751b2a5092229cfe9b978e20d..256cbeee87f5b082a1ffa5cd660964a126ee5c5b 100644 (file)
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -26,7 +26,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y