1 # Makefile for buildroot
3 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
4 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
5 # Copyright (C) 2014-2016 by the Buildroot developers <buildroot@buildroot.org>
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 # General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program; if not, write to the Free Software
19 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #--------------------------------------------------------------
23 # Just run 'make menuconfig', configure stuff, then run 'make'.
24 # You shouldn't need to mess with anything beyond this point...
25 #--------------------------------------------------------------
27 # Trick for always running with a fixed umask
29 ifneq ($(shell umask),$(UMASK))
30 .PHONY: _all $(MAKECMDGOALS)
36 @umask $(UMASK) && $(MAKE) --no-print-directory $(MAKECMDGOALS)
40 # This is our default rule, so must come first
43 # Set and export the version string
44 export BR2_VERSION := 2016.08-git
46 # Save running make version since it's clobbered by the make package
47 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
49 # Check for minimal make version (note: this check will break at make 10.x)
50 MIN_MAKE_VERSION = 3.81
51 ifneq ($(firstword $(sort $(RUNNING_MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
52 $(error You have make '$(RUNNING_MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
55 # Parallel execution of this Makefile is disabled because it changes
56 # the packages building order, that can be a problem for two reasons:
57 # - If a package has an unspecified optional dependency and that
58 # dependency is present when the package is built, it is used,
59 # otherwise it isn't (but compilation happily proceeds) so the end
60 # result will differ if the order is swapped due to parallel
62 # - Also changing the building order can be a problem if two packages
63 # manipulate the same file in the target directory.
65 # Taking into account the above considerations, if you still want to execute
66 # this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
67 # use the -j<jobs> option when building, e.g:
68 # make -j$((`getconf _NPROCESSORS_ONLN`+1))
73 CONFIG_CONFIG_IN = Config.in
74 CONFIG = support/kconfig
75 DATE := $(shell date +%Y%m%d)
77 # Compute the full local version string so packages can use it as-is
78 # Need to export it, so it can be got from environment in children (eg. mconf)
79 export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
81 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
82 defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
83 randpackageconfig allyespackageconfig allnopackageconfig \
84 print-version olddefconfig
86 # Some global targets do not trigger a build, but are used to collect
87 # metadata, or do various checks. When such targets are triggered,
88 # some packages should not do their configuration sanity
89 # checks. Provide them a BR_BUILDING variable set to 'y' when we're
90 # actually building and they should do their sanity checks.
92 # We're building in two situations: when MAKECMDGOALS is empty
93 # (default target is to build), or when MAKECMDGOALS contains
94 # something else than one of the nobuild_targets.
95 nobuild_targets := source source-check \
96 legal-info external-deps _external-deps \
98 ifeq ($(MAKECMDGOALS),)
100 else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),)
104 # Strip quotes and then whitespaces
105 qstrip = $(strip $(subst ",,$(1)))
108 # Variables for use in Make constructs
111 space := $(empty) $(empty)
113 ifneq ("$(origin O)", "command line")
115 CONFIG_DIR := $(TOPDIR)
118 # other packages might also support Linux-style out of tree builds
119 # with the O=<dir> syntax (E.G. BusyBox does). As make automatically
120 # forwards command line variable definitions those packages get very
121 # confused. Fix this by telling make to not do so
123 # strangely enough O is still passed to submakes with MAKEOVERRIDES
124 # (with make 3.81 atleast), the only thing that changes is the output
125 # of the origin function (command line -> environment).
126 # Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
127 # To really make O go away, we have to override it.
130 # we need to pass O= everywhere we call back into the toplevel makefile
131 EXTRAMAKEARGS = O=$(O)
135 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
136 # set, so unset it here to not cause problems. Notice that the export
137 # line doesn't affect the environment of $(shell ..) calls, so
138 # explictly throw away any output from 'cd' here.
140 BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
141 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
144 # Handling of BR2_EXTERNAL.
146 # The value of BR2_EXTERNAL is stored in .br-external in the output directory.
147 # On subsequent invocations of make, it is read in. It can still be overridden
148 # on the command line, therefore the file is re-created every time make is run.
150 # When BR2_EXTERNAL is set to an empty value (e.g. explicitly in command
151 # line), the .br-external file is removed and we point to
152 # support/dummy-external. This makes sure we can unconditionally include the
153 # Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
154 # override is necessary so the user can clear BR2_EXTERNAL from the command
155 # line, but the dummy path is still used internally.
157 BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
158 -include $(BR2_EXTERNAL_FILE)
159 ifeq ($(BR2_EXTERNAL),)
160 override BR2_EXTERNAL = support/dummy-external
161 $(shell rm -f $(BR2_EXTERNAL_FILE))
163 _BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
164 ifeq ($(_BR2_EXTERNAL),)
165 $(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
167 override BR2_EXTERNAL := $(_BR2_EXTERNAL)
168 $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
171 # To make sure that the environment variable overrides the .config option,
172 # set this before including .config.
173 ifneq ($(BR2_DL_DIR),)
174 DL_DIR := $(BR2_DL_DIR)
176 ifneq ($(BR2_CCACHE_DIR),)
177 BR_CACHE_DIR := $(BR2_CCACHE_DIR)
180 # Need that early, before we scan packages
181 # Avoids doing the $(or...) everytime
182 BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
184 BUILD_DIR := $(BASE_DIR)/build
185 BINARIES_DIR := $(BASE_DIR)/images
186 TARGET_DIR := $(BASE_DIR)/target
187 # initial definition so that 'make clean' works for most users, even without
188 # .config. HOST_DIR will be overwritten later when .config is included.
189 HOST_DIR := $(BASE_DIR)/host
190 GRAPHS_DIR := $(BASE_DIR)/graphs
192 LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
193 REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
194 REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
195 LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
196 LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
197 LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
198 LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
199 LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
200 LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
201 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
202 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
204 BR2_CONFIG = $(CONFIG_DIR)/.config
206 # Pull in the user's configuration file
207 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
208 -include $(BR2_CONFIG)
211 # To put more focus on warnings, be less verbose as default
212 # Use 'make V=1' to see the full commands
213 ifeq ("$(origin V)", "command line")
214 KBUILD_VERBOSE = $(V)
216 ifndef KBUILD_VERBOSE
220 ifeq ($(KBUILD_VERBOSE),1)
230 # we want bash as shell
231 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
232 else if [ -x /bin/bash ]; then echo /bin/bash; \
233 else echo sh; fi; fi)
235 # kconfig uses CONFIG_SHELL
236 CONFIG_SHELL := $(SHELL)
238 export SHELL CONFIG_SHELL Q KBUILD_VERBOSE
248 HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
250 HOSTCC_NOCCACHE := $(HOSTCC)
253 HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
255 HOSTCXX_NOCCACHE := $(HOSTCXX)
269 HOSTOBJCOPY := objcopy
274 HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
275 HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
276 HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
277 HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
278 HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
279 HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
280 HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
281 HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
283 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTLD
284 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
286 # Determine the userland we are running on.
288 # Note that, despite its name, we are not interested in the actual
289 # architecture name. This is mostly used to determine whether some
290 # of the binary tools (e.g. pre-built external toolchains) can run
291 # on the current host. So we need to know if the userland we're
292 # running on can actually run those toolchains.
294 # For example, a 64-bit prebuilt toolchain will not run on a 64-bit
295 # kernel if the userland is 32-bit (e.g. in a chroot for example).
297 # So, we extract the first part of the tuple the host gcc was
298 # configured to generate code for; we assume this is our userland.
300 export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
301 sed -e '/^Target: \([^-]*\).*/!d' \
304 -e 's/sun4u/sparc64/' \
307 -e 's/ppc64/powerpc64/' \
308 -e 's/ppc/powerpc/' \
309 -e 's/macppc/powerpc/' \
312 HOSTCC_VERSION := $(shell $(HOSTCC_NOCCACHE) --version | \
313 sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p')
315 # For gcc >= 5.x, we only need the major version.
316 ifneq ($(firstword $(HOSTCC_VERSION)),4)
317 HOSTCC_VERSION := $(firstword $(HOSTCC_VERSION))
320 # Make sure pkg-config doesn't look outside the buildroot tree
321 HOST_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH)
322 unexport PKG_CONFIG_PATH
323 unexport PKG_CONFIG_SYSROOT_DIR
324 unexport PKG_CONFIG_LIBDIR
326 # Having DESTDIR set in the environment confuses the installation
327 # steps of some packages.
330 # Causes breakage with packages that needs host-ruby
333 include package/pkg-utils.mk
334 include package/doc-asciidoc.mk
336 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
338 ################################################################################
340 # Hide troublesome environment variables from sub processes
342 ################################################################################
343 unexport CROSS_COMPILE
353 unexport GREP_OPTIONS
361 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
366 # silent mode requested?
367 QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q)
369 # Strip off the annoying quoting
370 ARCH := $(call qstrip,$(BR2_ARCH))
372 KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
373 -e s/i.86/i386/ -e s/sun4u/sparc64/ \
376 -e s/arm.*/arm/ -e s/sa110/arm/ \
377 -e s/aarch64.*/arm64/ \
378 -e s/bfin/blackfin/ \
379 -e s/parisc64/parisc/ \
380 -e s/powerpc64.*/powerpc/ \
381 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
383 -e s/microblazeel/microblaze/)
385 ZCAT := $(call qstrip,$(BR2_ZCAT))
386 BZCAT := $(call qstrip,$(BR2_BZCAT))
387 XZCAT := $(call qstrip,$(BR2_XZCAT))
388 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
390 # packages compiled for the host go here
391 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
393 # Quotes are needed for spaces and all in the original PATH content.
394 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
396 # Location of a file giving a big fat warning that output/target
397 # should not be used as the root filesystem.
398 TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
400 ifeq ($(BR2_CCACHE),y)
401 CCACHE := $(HOST_DIR)/usr/bin/ccache
402 BR_CACHE_DIR ?= $(call qstrip,$(BR2_CCACHE_DIR))
404 HOSTCC := $(CCACHE) $(HOSTCC)
405 HOSTCXX := $(CCACHE) $(HOSTCXX)
410 # Scripts in support/ or post-build scripts may need to reference
411 # these locations, so export them so it is easier to use
419 ################################################################################
421 # You should probably leave this stuff alone unless you know
422 # what you are doing.
424 ################################################################################
428 # Include legacy before the other things, because package .mk files
430 ifneq ($(BR2_DEPRECATED),y)
431 include Makefile.legacy
434 include package/Makefile.in
435 include support/dependencies/dependencies.mk
437 include toolchain/*.mk
438 include toolchain/*/*.mk
440 # Include the package override file if one has been provided in the
442 PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
443 ifneq ($(PACKAGE_OVERRIDE_FILE),)
444 -include $(PACKAGE_OVERRIDE_FILE)
447 include $(sort $(wildcard package/*/*.mk))
449 include boot/common.mk
450 include linux/linux.mk
453 include $(BR2_EXTERNAL)/external.mk
455 # Now we are sure we have all the packages scanned and defined. We now
456 # check for each package in the list of enabled packages, that all its
457 # dependencies are indeed enabled.
459 # Only trigger the check for default builds. If the user forces building
460 # a package, even if not enabled in the configuration, we want to accept
463 ifeq ($(MAKECMDGOALS),)
465 define CHECK_ONE_DEPENDENCY
466 ifeq ($$($(2)_TYPE),target)
467 ifeq ($$($(2)_IS_VIRTUAL),)
468 ifneq ($$($$($(2)_KCONFIG_VAR)),y)
469 $$(error $$($(2)_NAME) is in the dependency chain of $$($(1)_NAME) that \
470 has added it to its _DEPENDENCIES variable without selecting it or \
471 depending on it from Config.in)
477 $(foreach pkg,$(call UPPERCASE,$(PACKAGES)),\
478 $(foreach dep,$(call UPPERCASE,$($(pkg)_FINAL_ALL_DEPENDENCIES)),\
479 $(eval $(call CHECK_ONE_DEPENDENCY,$(pkg),$(dep))$(sep))))
483 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
484 $(HOST_DIR) $(BINARIES_DIR)
486 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
487 $(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
489 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
491 world: target-post-image
493 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
494 legal-info legal-info-prepare legal-info-clean printvars help \
495 list-defconfigs target-finalize target-post-image source-check
497 ################################################################################
499 # staging and target directories do NOT list these as
500 # dependencies anywhere else
502 ################################################################################
503 $(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
506 # Populating the staging with the base directories is handled by the skeleton package
508 @mkdir -p $(STAGING_DIR)
509 @ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
511 RSYNC_VCS_EXCLUSIONS = \
512 --exclude .svn --exclude .git --exclude .hg --exclude .bzr \
515 STRIP_FIND_CMD = find $(TARGET_DIR)
516 ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
517 STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
519 STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
521 # - libpthread.so: a non-stripped libpthread shared library is needed for
522 # proper debugging of pthread programs using gdb.
523 # - ld.so: a non-stripped dynamic linker library is needed for valgrind
524 # - kernel modules (*.ko): do not function properly when stripped like normal
525 # applications and libraries. Normally kernel modules are already excluded
526 # by the executable permission check above, so the explicit exclusion is only
527 # done for kernel modules with incorrect permissions.
528 STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* ld-*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print0
530 ifeq ($(BR2_ECLIPSE_REGISTER),y)
531 define TOOLCHAIN_ECLIPSE_REGISTER
532 ./support/scripts/eclipse-register-toolchain `readlink -f $(O)` \
533 $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
535 TARGET_FINALIZE_HOOKS += TOOLCHAIN_ECLIPSE_REGISTER
538 # Generate locale data. Basically, we call the localedef program
539 # (built by the host-localedef package) for each locale. The input
540 # data comes preferably from the toolchain, or if the toolchain does
541 # not have them (Linaro toolchains), we use the ones available on the
543 ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
544 GLIBC_GENERATE_LOCALES = $(call qstrip,$(BR2_GENERATE_LOCALE))
545 ifneq ($(GLIBC_GENERATE_LOCALES),)
546 PACKAGES += host-localedef
548 define GENERATE_GLIBC_LOCALES
549 $(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
550 $(Q)for locale in $(GLIBC_GENERATE_LOCALES) ; do \
551 inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
552 charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
553 if test -z "$${charmap}" ; then \
556 echo "Generating locale $${inputfile}.$${charmap}" ; \
557 I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
558 $(HOST_DIR)/usr/bin/localedef \
559 --prefix=$(TARGET_DIR) \
560 --$(call LOWERCASE,$(BR2_ENDIAN))-endian \
561 -i $${inputfile} -f $${charmap} \
565 TARGET_FINALIZE_HOOKS += GENERATE_GLIBC_LOCALES
569 ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
570 LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
571 LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
573 # This piece of junk does the following:
574 # First collect the whitelist in a file.
575 # Then go over all the locale dirs and for each subdir, check if it exists
576 # in the whitelist file. If it doesn't, kill it.
577 # Finally, specifically for X11, regenerate locale.dir from the whitelist.
579 rm -f $(LOCALE_WHITELIST)
580 for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
582 for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale)); \
584 for langdir in $$dir/*; \
586 if [ -e "$${langdir}" ]; \
588 grep -qx "$${langdir##*/}" $(LOCALE_WHITELIST) || rm -rf $$langdir; \
592 if [ -d $(TARGET_DIR)/usr/share/X11/locale ]; \
594 for lang in $(LOCALE_NOPURGE); \
596 if [ -f $(TARGET_DIR)/usr/share/X11/locale/$$lang/XLC_LOCALE ]; \
598 echo "$$lang/XLC_LOCALE: $$lang"; \
600 done > $(TARGET_DIR)/usr/share/X11/locale/locale.dir; \
603 TARGET_FINALIZE_HOOKS += PURGE_LOCALES
606 $(TARGETS_ROOTFS): target-finalize
608 target-finalize: $(PACKAGES)
609 @$(call MESSAGE,"Finalizing target directory")
610 $(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
611 rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
612 $(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
613 $(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
614 find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
615 find $(TARGET_DIR)/lib $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/libexec \
616 \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
617 ifneq ($(BR2_PACKAGE_GDB),y)
618 rm -rf $(TARGET_DIR)/usr/share/gdb
620 ifneq ($(BR2_PACKAGE_BASH),y)
621 rm -rf $(TARGET_DIR)/usr/share/bash-completion
623 ifneq ($(BR2_PACKAGE_ZSH),y)
624 rm -rf $(TARGET_DIR)/usr/share/zsh
626 rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
627 rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
628 rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
629 rm -rf $(TARGET_DIR)/usr/share/gtk-doc
630 -rmdir $(TARGET_DIR)/usr/share 2>/dev/null
631 $(STRIP_FIND_CMD) | xargs -0 $(STRIPCMD) 2>/dev/null || true
632 if test -d $(TARGET_DIR)/lib/modules; then \
633 find $(TARGET_DIR)/lib/modules -type f -name '*.ko' -print0 | \
634 xargs -0 -r $(KSTRIPCMD); fi
636 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
637 # besides the one in which crash occurred; or SIGTRAP kills my program when
638 # I set a breakpoint"
639 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
640 find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
641 xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
644 # Valgrind needs ld.so with enough information, so only strip
646 find $(TARGET_DIR)/lib -type f -name 'ld-*.so*' | \
647 xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
648 test -f $(TARGET_DIR)/etc/ld.so.conf && \
649 { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
650 test -d $(TARGET_DIR)/etc/ld.so.conf.d && \
651 { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
652 mkdir -p $(TARGET_DIR)/etc
654 echo "NAME=Buildroot"; \
655 echo "VERSION=$(BR2_VERSION_FULL)"; \
656 echo "ID=buildroot"; \
657 echo "VERSION_ID=$(BR2_VERSION)"; \
658 echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
659 ) > $(TARGET_DIR)/etc/os-release
661 @$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
662 $(call MESSAGE,"Copying overlay $(d)"); \
663 rsync -a --ignore-times --keep-dirlinks $(RSYNC_VCS_EXCLUSIONS) \
664 --chmod=u=rwX,go=rX --exclude .empty --exclude '*~' \
665 $(d)/ $(TARGET_DIR)$(sep))
667 @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
668 $(call MESSAGE,"Executing post-build script $(s)"); \
669 $(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
671 target-post-image: $(TARGETS_ROOTFS) target-finalize
672 @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
673 $(call MESSAGE,"Executing post-image script $(s)"); \
674 $(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
676 source: $(foreach p,$(PACKAGES),$(p)-all-source)
678 _external-deps: $(foreach p,$(PACKAGES),$(p)-all-external-deps)
680 @$(MAKE1) -Bs $(EXTRAMAKEARGS) _external-deps | sort -u
682 # check if download URLs are outdated
683 source-check: $(foreach p,$(PACKAGES),$(p)-all-source-check)
686 @rm -fr $(LEGAL_INFO_DIR)
688 legal-info-prepare: $(LEGAL_INFO_DIR)
689 @$(call MESSAGE,"Collecting legal info")
690 @$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
691 @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
692 @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
693 @$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
694 @$(call legal-warning,the Buildroot source code has not been saved)
695 @cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
697 legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p)-all-legal-info) \
698 $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
699 @cat support/legal-info/README.header >>$(LEGAL_REPORT)
700 @if [ -r $(LEGAL_WARNINGS) ]; then \
701 cat support/legal-info/README.warnings-header \
702 $(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
703 cat $(LEGAL_WARNINGS); fi
704 @echo "Legal info produced in $(LEGAL_INFO_DIR)"
705 @rm -f $(LEGAL_WARNINGS)
708 @echo $(PACKAGES) $(TARGETS_ROOTFS)
710 graph-build: $(O)/build/build-time.log
711 @install -d $(GRAPHS_DIR)
712 $(foreach o,name build duration,./support/scripts/graph-build-time \
713 --type=histogram --order=$(o) --input=$(<) \
714 --output=$(GRAPHS_DIR)/build.hist-$(o).$(BR_GRAPH_OUT) \
715 $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
716 $(foreach t,packages steps,./support/scripts/graph-build-time \
717 --type=pie-$(t) --input=$(<) \
718 --output=$(GRAPHS_DIR)/build.pie-$(t).$(BR_GRAPH_OUT) \
719 $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
721 graph-depends-requirements:
722 @dot -? >/dev/null 2>&1 || \
723 { echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
725 graph-depends: graph-depends-requirements
726 @$(INSTALL) -d $(GRAPHS_DIR)
727 @cd "$(CONFIG_DIR)"; \
728 $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
729 -o $(GRAPHS_DIR)/$(@).dot
730 dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) \
731 -o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT) \
732 $(GRAPHS_DIR)/$(@).dot
735 $(Q)mkdir -p $(GRAPHS_DIR)
736 $(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
737 --graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
738 --file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
739 --package-size-csv $(GRAPHS_DIR)/package-size-stats.csv
742 @cd "$(CONFIG_DIR)"; \
743 $(TOPDIR)/support/scripts/graph-depends -C
745 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
749 endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
752 # ---------------------------------------------------------------------------
754 HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
757 $(BUILD_DIR)/buildroot-config/%onf:
758 mkdir -p $(@D)/lxdialog
759 PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
760 obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
762 DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
764 # We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
765 # recognize that if it's still at its default $(CONFIG_DIR)/defconfig
766 COMMON_CONFIG_ENV = \
767 BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
768 KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
769 KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
770 KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
771 BR2_CONFIG=$(BR2_CONFIG) \
772 BR2_EXTERNAL=$(BR2_EXTERNAL) \
773 HOST_GCC_VERSION="$(HOSTCC_VERSION)" \
776 xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
777 @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
779 gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
780 @$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
782 menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
783 @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
785 nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
786 @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
788 config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
789 @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
791 # For the config targets that automatically select options, we pass
792 # SKIP_LEGACY=y to disable the legacy options. However, in that case
793 # no values are set for the legacy options so a subsequent oldconfig
794 # will query them. Therefore, run an additional olddefconfig.
796 oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
797 @$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
799 randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
800 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --randconfig $(CONFIG_CONFIG_IN)
801 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
803 allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
804 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allyesconfig $(CONFIG_CONFIG_IN)
805 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
807 allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
808 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allnoconfig $(CONFIG_CONFIG_IN)
809 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
811 randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
812 @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
813 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
814 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
815 $< --randconfig $(CONFIG_CONFIG_IN)
816 @rm -f $(CONFIG_DIR)/.config.nopkg
817 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
819 allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
820 @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
821 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
822 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
823 $< --allyesconfig $(CONFIG_CONFIG_IN)
824 @rm -f $(CONFIG_DIR)/.config.nopkg
825 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
827 allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
828 @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
829 @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
830 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
831 $< --allnoconfig $(CONFIG_CONFIG_IN)
832 @rm -f $(CONFIG_DIR)/.config.nopkg
833 @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
835 silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
836 $(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
838 olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
839 $(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
841 defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
842 @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
844 # Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig
845 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
846 @$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(TOPDIR)/configs/$@ \
847 $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
849 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
850 @$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(BR2_EXTERNAL)/configs/$@ \
851 $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
853 savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
854 @$(COMMON_CONFIG_ENV) $< \
855 --savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
857 @$(SED) '/BR2_DEFCONFIG=/d' $(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig)
859 .PHONY: defconfig savedefconfig
861 ################################################################################
863 # Cleanup and misc junk
865 ################################################################################
867 # outputmakefile generates a Makefile in the output directory, if using a
868 # separate output directory. This allows convenient use of make in the
871 ifeq ($(NEED_WRAPPER),y)
872 $(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
875 # printvars prints all the variables currently defined in our
876 # Makefiles. Alternatively, if a non-empty VARS variable is passed,
877 # only the variables matching the make pattern passed in VARS are
881 $(sort $(if $(VARS),$(filter $(VARS),$(.VARIABLES)),$(.VARIABLES))), \
882 $(if $(filter-out environment% default automatic, \
884 $(info $V=$($V) ($(value $V)))))
887 rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
888 $(BUILD_DIR) $(BASE_DIR)/staging \
889 $(LEGAL_INFO_DIR) $(GRAPHS_DIR)
892 ifeq ($(DL_DIR),$(TOPDIR)/dl)
898 rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
899 $(CONFIG_DIR)/.auto.deps $(BR2_EXTERNAL_FILE)
903 @echo ' clean - delete all files created by build'
904 @echo ' distclean - delete all non-source files (including .config)'
907 @echo ' all - make world'
908 @echo ' toolchain - build toolchain'
910 @echo 'Configuration:'
911 @echo ' menuconfig - interactive curses-based configurator'
912 @echo ' nconfig - interactive ncurses-based configurator'
913 @echo ' xconfig - interactive Qt-based configurator'
914 @echo ' gconfig - interactive GTK-based configurator'
915 @echo ' oldconfig - resolve any unresolved symbols in .config'
916 @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
917 @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
918 @echo ' randconfig - New config with random answer to all options'
919 @echo ' defconfig - New config with default answer to all options'
920 @echo ' BR2_DEFCONFIG, if set, is used as input'
921 @echo ' savedefconfig - Save current config to BR2_DEFCONFIG (minimal config)'
922 @echo ' allyesconfig - New config where all options are accepted with yes'
923 @echo ' allnoconfig - New config where all options are answered with no'
924 @echo ' randpackageconfig - New config with random answer to package options'
925 @echo ' allyespackageconfig - New config where pkg options are accepted with yes'
926 @echo ' allnopackageconfig - New config where package options are answered with no'
928 @echo 'Package-specific:'
929 @echo ' <pkg> - Build and install <pkg> and all its dependencies'
930 @echo ' <pkg>-source - Only download the source files for <pkg>'
931 @echo ' <pkg>-extract - Extract <pkg> sources'
932 @echo ' <pkg>-patch - Apply patches to <pkg>'
933 @echo ' <pkg>-depends - Build <pkg>'\''s dependencies'
934 @echo ' <pkg>-configure - Build <pkg> up to the configure step'
935 @echo ' <pkg>-build - Build <pkg> up to the build step'
936 @echo ' <pkg>-graph-depends - Generate a graph of <pkg>'\''s dependencies'
937 @echo ' <pkg>-dirclean - Remove <pkg> build directory'
938 @echo ' <pkg>-reconfigure - Restart the build from the configure step'
939 @echo ' <pkg>-rebuild - Restart the build from the build step'
940 $(foreach p,$(HELP_PACKAGES), \
942 @echo '$($(p)_NAME):' $(sep) \
943 $($(p)_HELP_CMDS)$(sep))
945 @echo 'Documentation:'
946 @echo ' manual - build manual in all formats'
947 @echo ' manual-html - build manual in HTML'
948 @echo ' manual-split-html - build manual in split HTML'
949 @echo ' manual-pdf - build manual in PDF'
950 @echo ' manual-text - build manual in text'
951 @echo ' manual-epub - build manual in ePub'
952 @echo ' graph-build - generate graphs of the build times'
953 @echo ' graph-depends - generate graph of the dependency tree'
954 @echo ' graph-size - generate stats of the filesystem size'
955 @echo ' list-defconfigs - list all defconfigs (pre-configured minimal systems)'
957 @echo 'Miscellaneous:'
958 @echo ' source - download all sources needed for offline-build'
959 @echo ' source-check - check selected packages for valid download URLs'
960 @echo ' external-deps - list external packages used'
961 @echo ' legal-info - generate info about license compliance'
963 @echo ' make V=0|1 - 0 => quiet build (default), 1 => verbose build'
964 @echo ' make O=dir - Locate all output files in "dir", including .config'
966 @echo 'For further details, see README, generate the Buildroot manual, or consult'
967 @echo 'it on-line at http://buildroot.org/docs.html'
971 @echo 'Built-in configs:'
972 @$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
973 printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
974 ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
976 @echo 'User-provided configs:'
977 @$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
978 printf " %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
982 release: OUT = buildroot-$(BR2_VERSION)
984 # Create release tarballs. We need to fiddle a bit to add the generated
985 # documentation to the git output
987 git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
988 $(MAKE) O=$(OUT) manual-html manual-text manual-pdf
989 $(MAKE) O=$(OUT) manual-clean
990 tar rf $(OUT).tar $(OUT)
991 gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
992 bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
993 rm -rf $(OUT) $(OUT).tar
996 @echo $(BR2_VERSION_FULL)
998 include docs/manual/manual.mk
999 -include $(BR2_EXTERNAL)/docs/*/*.mk
1001 .PHONY: $(noconfig_targets)