}
}
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS))
+ return 1;
+
/* PCK0..PCK3 must be disabled, or configured to use clk32k */
for (i = 0; i < 4; i++) {
u32 css;
return 0;
}
}
-#endif
return 1;
}
iotable_init(desc, 1);
}
-static struct map_desc at91_io_desc __initdata = {
+static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
unsigned int da850_max_speed = 300000;
-int __init da850_register_cpufreq(char *async_clk)
+int da850_register_cpufreq(char *async_clk)
{
int i;
#define IRQ_NETWINDER_VGA _ISA_IRQ(11)
#define IRQ_NETWINDER_SOUND _ISA_IRQ(12)
-#undef RTC_IRQ
-#define RTC_IRQ IRQ_ISA_RTC_ALARM
#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD
#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY
extern int init_atu;
static int __init
-iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
{
WARN_ON(idsel < 1 || idsel > 2);
/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
*/
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
{
int which_atu;
struct pci_bus *bus = NULL;
#define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \
__phys_to_virt(x) : __bus_to_virt(x)); })
#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
- (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+ (dma_addr_t)__virt_to_phys((unsigned long)x) \
+ : (dma_addr_t)__virt_to_bus(x); })
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (!is_lbus_device(dev)) \
/*
* Description of the windows needed by the platform code
*/
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+static struct orion_addr_map_cfg addr_map_cfg __initdata = {
.num_wins = 14,
.remappable_wins = 8,
.win_cfg_base = win_cfg_base,
orion_time_set_base(TIMER_VIRT_BASE);
}
-static void mv78xx0_timer_init(void)
+static void __init_refok mv78xx0_timer_init(void)
{
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_MV78XX0_TIMER_1, get_tclk());
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
+#undef GPIO24_SSP1_SFRM
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
.gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
/******************************************************************************
* GPIO keys
******************************************************************************/
.platform_data = &palmte2_pxa_keys_data,
},
};
+#endif
/******************************************************************************
* Backlight
#ifdef CONFIG_PM
static int sharpsl_off_charge_battery(void);
static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
#endif
static int sharpsl_check_battery_temp(void);
static int sharpsl_ac_check(void);
return 0;
}
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
- int buff[5], temp, i, acin;
-
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
- /* Check AC-Adapter */
- acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- sharpsl_pm.machinfo->charge(0);
- udelay(100);
- sharpsl_pm.machinfo->discharge(1); /* enable discharge */
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery : check inserting battery ? */
- for (i = 0; i < 5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- udelay(100);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.machinfo->discharge(0);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
- if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
- (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
- return -1;
- return 0;
-}
-
static int sharpsl_off_charge_error(void)
{
dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
static int __init viper_tpm_setup(char *str)
{
- strict_strtoul(str, 10, &viper_tpm);
- return 1;
+ return strict_strtoul(str, 10, &viper_tpm) >= 0;
}
__setup("tpm=", viper_tpm_setup);
*ecp = ec;
slot_to_expcard[slot] = ec;
- device_register(&ec->dev);
+ rc = device_register(&ec->dev);
+ if (rc)
+ goto nodev;
return 0;
/* IRQ initialisation code */
-static int __init s3c2416_add_sub(unsigned int base,
+static int s3c2416_add_sub(unsigned int base,
void (*demux)(unsigned int,
struct irq_desc *),
struct irq_chip *chip,
return 0;
}
-static void __init s3c2416_irq_add_second(void)
+static void s3c2416_irq_add_second(void)
{
unsigned long pend;
unsigned long last;
}
}
-static int __init s3c2416_irq_add(struct device *dev,
+static int s3c2416_irq_add(struct device *dev,
struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
/* IRQ initialisation code */
-static int __init s3c2443_add_sub(unsigned int base,
+static int s3c2443_add_sub(unsigned int base,
void (*demux)(unsigned int,
struct irq_desc *),
struct irq_chip *chip,
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev,
+static int s3c2443_irq_add(struct device *dev,
struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
};
-int usb_simtec_init(void)
+int __init usb_simtec_init(void)
{
int ret;
static int __init shark_pci_init(void)
{
if (!machine_is_shark())
- return;
+ return -ENODEV;
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x50000000;
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
help
default y
select ARM_GIC
select HAS_MTU
- select PL310_ERRATA_753970
+ select PL310_ERRATA_753970 if CACHE_PL310
select ARM_ERRATA_754322
- select ARM_ERRATA_764369
+ select ARM_ERRATA_764369 if SMP
select CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
static inline void netwinder_lock(unsigned long *flags)
{
- spin_lock_irqsave(&nw_gpio_lock, *flags);
+ raw_spin_lock_irqsave(&nw_gpio_lock, *flags);
}
static inline void netwinder_unlock(unsigned long *flags)
{
- spin_unlock_irqrestore(&nw_gpio_lock, *flags);
+ raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags);
}
static inline void netwinder_set_fan(int i)
{
unsigned long flags;
- spin_lock_irqsave(&nw_gpio_lock, flags);
+ raw_spin_lock_irqsave(&nw_gpio_lock, flags);
nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
+ raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static inline int netwinder_get_fan(void)
* we want to write a bit pattern XXX1 to Xilinx to enable
* the write gate, which will be open for about the next 2ms.
*/
- spin_lock_irqsave(&nw_gpio_lock, flags);
+ raw_spin_lock_irqsave(&nw_gpio_lock, flags);
nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
+ raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
/*
* let the ISA bus to catch on...
{
unsigned long flags;
- spin_lock_irqsave(&nw_gpio_lock, flags);
+ raw_spin_lock_irqsave(&nw_gpio_lock, flags);
nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
+ raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
static void
projects / can-eth-gw-linux.git / commitdiff