]> rtime.felk.cvut.cz Git - can-eth-gw-linux.git/blob - drivers/dma/pl330.c
Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
[can-eth-gw-linux.git] / drivers / dma / pl330.c
1 /*
2  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3  *              http://www.samsung.com
4  *
5  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6  *      Jaswinder Singh <jassi.brar@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/scatterlist.h>
28 #include <linux/of.h>
29
30 #include "dmaengine.h"
31 #define PL330_MAX_CHAN          8
32 #define PL330_MAX_IRQS          32
33 #define PL330_MAX_PERI          32
34
35 enum pl330_srccachectrl {
36         SCCTRL0,        /* Noncacheable and nonbufferable */
37         SCCTRL1,        /* Bufferable only */
38         SCCTRL2,        /* Cacheable, but do not allocate */
39         SCCTRL3,        /* Cacheable and bufferable, but do not allocate */
40         SINVALID1,
41         SINVALID2,
42         SCCTRL6,        /* Cacheable write-through, allocate on reads only */
43         SCCTRL7,        /* Cacheable write-back, allocate on reads only */
44 };
45
46 enum pl330_dstcachectrl {
47         DCCTRL0,        /* Noncacheable and nonbufferable */
48         DCCTRL1,        /* Bufferable only */
49         DCCTRL2,        /* Cacheable, but do not allocate */
50         DCCTRL3,        /* Cacheable and bufferable, but do not allocate */
51         DINVALID1,      /* AWCACHE = 0x1000 */
52         DINVALID2,
53         DCCTRL6,        /* Cacheable write-through, allocate on writes only */
54         DCCTRL7,        /* Cacheable write-back, allocate on writes only */
55 };
56
57 enum pl330_byteswap {
58         SWAP_NO,
59         SWAP_2,
60         SWAP_4,
61         SWAP_8,
62         SWAP_16,
63 };
64
65 enum pl330_reqtype {
66         MEMTOMEM,
67         MEMTODEV,
68         DEVTOMEM,
69         DEVTODEV,
70 };
71
72 /* Register and Bit field Definitions */
73 #define DS                      0x0
74 #define DS_ST_STOP              0x0
75 #define DS_ST_EXEC              0x1
76 #define DS_ST_CMISS             0x2
77 #define DS_ST_UPDTPC            0x3
78 #define DS_ST_WFE               0x4
79 #define DS_ST_ATBRR             0x5
80 #define DS_ST_QBUSY             0x6
81 #define DS_ST_WFP               0x7
82 #define DS_ST_KILL              0x8
83 #define DS_ST_CMPLT             0x9
84 #define DS_ST_FLTCMP            0xe
85 #define DS_ST_FAULT             0xf
86
87 #define DPC                     0x4
88 #define INTEN                   0x20
89 #define ES                      0x24
90 #define INTSTATUS               0x28
91 #define INTCLR                  0x2c
92 #define FSM                     0x30
93 #define FSC                     0x34
94 #define FTM                     0x38
95
96 #define _FTC                    0x40
97 #define FTC(n)                  (_FTC + (n)*0x4)
98
99 #define _CS                     0x100
100 #define CS(n)                   (_CS + (n)*0x8)
101 #define CS_CNS                  (1 << 21)
102
103 #define _CPC                    0x104
104 #define CPC(n)                  (_CPC + (n)*0x8)
105
106 #define _SA                     0x400
107 #define SA(n)                   (_SA + (n)*0x20)
108
109 #define _DA                     0x404
110 #define DA(n)                   (_DA + (n)*0x20)
111
112 #define _CC                     0x408
113 #define CC(n)                   (_CC + (n)*0x20)
114
115 #define CC_SRCINC               (1 << 0)
116 #define CC_DSTINC               (1 << 14)
117 #define CC_SRCPRI               (1 << 8)
118 #define CC_DSTPRI               (1 << 22)
119 #define CC_SRCNS                (1 << 9)
120 #define CC_DSTNS                (1 << 23)
121 #define CC_SRCIA                (1 << 10)
122 #define CC_DSTIA                (1 << 24)
123 #define CC_SRCBRSTLEN_SHFT      4
124 #define CC_DSTBRSTLEN_SHFT      18
125 #define CC_SRCBRSTSIZE_SHFT     1
126 #define CC_DSTBRSTSIZE_SHFT     15
127 #define CC_SRCCCTRL_SHFT        11
128 #define CC_SRCCCTRL_MASK        0x7
129 #define CC_DSTCCTRL_SHFT        25
130 #define CC_DRCCCTRL_MASK        0x7
131 #define CC_SWAP_SHFT            28
132
133 #define _LC0                    0x40c
134 #define LC0(n)                  (_LC0 + (n)*0x20)
135
136 #define _LC1                    0x410
137 #define LC1(n)                  (_LC1 + (n)*0x20)
138
139 #define DBGSTATUS               0xd00
140 #define DBG_BUSY                (1 << 0)
141
142 #define DBGCMD                  0xd04
143 #define DBGINST0                0xd08
144 #define DBGINST1                0xd0c
145
146 #define CR0                     0xe00
147 #define CR1                     0xe04
148 #define CR2                     0xe08
149 #define CR3                     0xe0c
150 #define CR4                     0xe10
151 #define CRD                     0xe14
152
153 #define PERIPH_ID               0xfe0
154 #define PERIPH_REV_SHIFT        20
155 #define PERIPH_REV_MASK         0xf
156 #define PERIPH_REV_R0P0         0
157 #define PERIPH_REV_R1P0         1
158 #define PERIPH_REV_R1P1         2
159 #define PCELL_ID                0xff0
160
161 #define CR0_PERIPH_REQ_SET      (1 << 0)
162 #define CR0_BOOT_EN_SET         (1 << 1)
163 #define CR0_BOOT_MAN_NS         (1 << 2)
164 #define CR0_NUM_CHANS_SHIFT     4
165 #define CR0_NUM_CHANS_MASK      0x7
166 #define CR0_NUM_PERIPH_SHIFT    12
167 #define CR0_NUM_PERIPH_MASK     0x1f
168 #define CR0_NUM_EVENTS_SHIFT    17
169 #define CR0_NUM_EVENTS_MASK     0x1f
170
171 #define CR1_ICACHE_LEN_SHIFT    0
172 #define CR1_ICACHE_LEN_MASK     0x7
173 #define CR1_NUM_ICACHELINES_SHIFT       4
174 #define CR1_NUM_ICACHELINES_MASK        0xf
175
176 #define CRD_DATA_WIDTH_SHIFT    0
177 #define CRD_DATA_WIDTH_MASK     0x7
178 #define CRD_WR_CAP_SHIFT        4
179 #define CRD_WR_CAP_MASK         0x7
180 #define CRD_WR_Q_DEP_SHIFT      8
181 #define CRD_WR_Q_DEP_MASK       0xf
182 #define CRD_RD_CAP_SHIFT        12
183 #define CRD_RD_CAP_MASK         0x7
184 #define CRD_RD_Q_DEP_SHIFT      16
185 #define CRD_RD_Q_DEP_MASK       0xf
186 #define CRD_DATA_BUFF_SHIFT     20
187 #define CRD_DATA_BUFF_MASK      0x3ff
188
189 #define PART                    0x330
190 #define DESIGNER                0x41
191 #define REVISION                0x0
192 #define INTEG_CFG               0x0
193 #define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
194
195 #define PCELL_ID_VAL            0xb105f00d
196
197 #define PL330_STATE_STOPPED             (1 << 0)
198 #define PL330_STATE_EXECUTING           (1 << 1)
199 #define PL330_STATE_WFE                 (1 << 2)
200 #define PL330_STATE_FAULTING            (1 << 3)
201 #define PL330_STATE_COMPLETING          (1 << 4)
202 #define PL330_STATE_WFP                 (1 << 5)
203 #define PL330_STATE_KILLING             (1 << 6)
204 #define PL330_STATE_FAULT_COMPLETING    (1 << 7)
205 #define PL330_STATE_CACHEMISS           (1 << 8)
206 #define PL330_STATE_UPDTPC              (1 << 9)
207 #define PL330_STATE_ATBARRIER           (1 << 10)
208 #define PL330_STATE_QUEUEBUSY           (1 << 11)
209 #define PL330_STATE_INVALID             (1 << 15)
210
211 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
212                                 | PL330_STATE_WFE | PL330_STATE_FAULTING)
213
214 #define CMD_DMAADDH             0x54
215 #define CMD_DMAEND              0x00
216 #define CMD_DMAFLUSHP           0x35
217 #define CMD_DMAGO               0xa0
218 #define CMD_DMALD               0x04
219 #define CMD_DMALDP              0x25
220 #define CMD_DMALP               0x20
221 #define CMD_DMALPEND            0x28
222 #define CMD_DMAKILL             0x01
223 #define CMD_DMAMOV              0xbc
224 #define CMD_DMANOP              0x18
225 #define CMD_DMARMB              0x12
226 #define CMD_DMASEV              0x34
227 #define CMD_DMAST               0x08
228 #define CMD_DMASTP              0x29
229 #define CMD_DMASTZ              0x0c
230 #define CMD_DMAWFE              0x36
231 #define CMD_DMAWFP              0x30
232 #define CMD_DMAWMB              0x13
233
234 #define SZ_DMAADDH              3
235 #define SZ_DMAEND               1
236 #define SZ_DMAFLUSHP            2
237 #define SZ_DMALD                1
238 #define SZ_DMALDP               2
239 #define SZ_DMALP                2
240 #define SZ_DMALPEND             2
241 #define SZ_DMAKILL              1
242 #define SZ_DMAMOV               6
243 #define SZ_DMANOP               1
244 #define SZ_DMARMB               1
245 #define SZ_DMASEV               2
246 #define SZ_DMAST                1
247 #define SZ_DMASTP               2
248 #define SZ_DMASTZ               1
249 #define SZ_DMAWFE               2
250 #define SZ_DMAWFP               2
251 #define SZ_DMAWMB               1
252 #define SZ_DMAGO                6
253
254 #define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
255 #define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
256
257 #define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
258 #define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
259
260 /*
261  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
262  * at 1byte/burst for P<->M and M<->M respectively.
263  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
264  * should be enough for P<->M and M<->M respectively.
265  */
266 #define MCODE_BUFF_PER_REQ      256
267
268 /* If the _pl330_req is available to the client */
269 #define IS_FREE(req)    (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
270
271 /* Use this _only_ to wait on transient states */
272 #define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
273
274 #ifdef PL330_DEBUG_MCGEN
275 static unsigned cmd_line;
276 #define PL330_DBGCMD_DUMP(off, x...)    do { \
277                                                 printk("%x:", cmd_line); \
278                                                 printk(x); \
279                                                 cmd_line += off; \
280                                         } while (0)
281 #define PL330_DBGMC_START(addr)         (cmd_line = addr)
282 #else
283 #define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
284 #define PL330_DBGMC_START(addr)         do {} while (0)
285 #endif
286
287 /* The number of default descriptors */
288
289 #define NR_DEFAULT_DESC 16
290
291 /* Populated by the PL330 core driver for DMA API driver's info */
292 struct pl330_config {
293         u32     periph_id;
294         u32     pcell_id;
295 #define DMAC_MODE_NS    (1 << 0)
296         unsigned int    mode;
297         unsigned int    data_bus_width:10; /* In number of bits */
298         unsigned int    data_buf_dep:10;
299         unsigned int    num_chan:4;
300         unsigned int    num_peri:6;
301         u32             peri_ns;
302         unsigned int    num_events:6;
303         u32             irq_ns;
304 };
305
306 /* Handle to the DMAC provided to the PL330 core */
307 struct pl330_info {
308         /* Owning device */
309         struct device *dev;
310         /* Size of MicroCode buffers for each channel. */
311         unsigned mcbufsz;
312         /* ioremap'ed address of PL330 registers. */
313         void __iomem    *base;
314         /* Client can freely use it. */
315         void    *client_data;
316         /* PL330 core data, Client must not touch it. */
317         void    *pl330_data;
318         /* Populated by the PL330 core driver during pl330_add */
319         struct pl330_config     pcfg;
320         /*
321          * If the DMAC has some reset mechanism, then the
322          * client may want to provide pointer to the method.
323          */
324         void (*dmac_reset)(struct pl330_info *pi);
325 };
326
327 /**
328  * Request Configuration.
329  * The PL330 core does not modify this and uses the last
330  * working configuration if the request doesn't provide any.
331  *
332  * The Client may want to provide this info only for the
333  * first request and a request with new settings.
334  */
335 struct pl330_reqcfg {
336         /* Address Incrementing */
337         unsigned dst_inc:1;
338         unsigned src_inc:1;
339
340         /*
341          * For now, the SRC & DST protection levels
342          * and burst size/length are assumed same.
343          */
344         bool nonsecure;
345         bool privileged;
346         bool insnaccess;
347         unsigned brst_len:5;
348         unsigned brst_size:3; /* in power of 2 */
349
350         enum pl330_dstcachectrl dcctl;
351         enum pl330_srccachectrl scctl;
352         enum pl330_byteswap swap;
353         struct pl330_config *pcfg;
354 };
355
356 /*
357  * One cycle of DMAC operation.
358  * There may be more than one xfer in a request.
359  */
360 struct pl330_xfer {
361         u32 src_addr;
362         u32 dst_addr;
363         /* Size to xfer */
364         u32 bytes;
365         /*
366          * Pointer to next xfer in the list.
367          * The last xfer in the req must point to NULL.
368          */
369         struct pl330_xfer *next;
370 };
371
372 /* The xfer callbacks are made with one of these arguments. */
373 enum pl330_op_err {
374         /* The all xfers in the request were success. */
375         PL330_ERR_NONE,
376         /* If req aborted due to global error. */
377         PL330_ERR_ABORT,
378         /* If req failed due to problem with Channel. */
379         PL330_ERR_FAIL,
380 };
381
382 /* A request defining Scatter-Gather List ending with NULL xfer. */
383 struct pl330_req {
384         enum pl330_reqtype rqtype;
385         /* Index of peripheral for the xfer. */
386         unsigned peri:5;
387         /* Unique token for this xfer, set by the client. */
388         void *token;
389         /* Callback to be called after xfer. */
390         void (*xfer_cb)(void *token, enum pl330_op_err err);
391         /* If NULL, req will be done at last set parameters. */
392         struct pl330_reqcfg *cfg;
393         /* Pointer to first xfer in the request. */
394         struct pl330_xfer *x;
395         /* Hook to attach to DMAC's list of reqs with due callback */
396         struct list_head rqd;
397 };
398
399 /*
400  * To know the status of the channel and DMAC, the client
401  * provides a pointer to this structure. The PL330 core
402  * fills it with current information.
403  */
404 struct pl330_chanstatus {
405         /*
406          * If the DMAC engine halted due to some error,
407          * the client should remove-add DMAC.
408          */
409         bool dmac_halted;
410         /*
411          * If channel is halted due to some error,
412          * the client should ABORT/FLUSH and START the channel.
413          */
414         bool faulting;
415         /* Location of last load */
416         u32 src_addr;
417         /* Location of last store */
418         u32 dst_addr;
419         /*
420          * Pointer to the currently active req, NULL if channel is
421          * inactive, even though the requests may be present.
422          */
423         struct pl330_req *top_req;
424         /* Pointer to req waiting second in the queue if any. */
425         struct pl330_req *wait_req;
426 };
427
428 enum pl330_chan_op {
429         /* Start the channel */
430         PL330_OP_START,
431         /* Abort the active xfer */
432         PL330_OP_ABORT,
433         /* Stop xfer and flush queue */
434         PL330_OP_FLUSH,
435 };
436
437 struct _xfer_spec {
438         u32 ccr;
439         struct pl330_req *r;
440         struct pl330_xfer *x;
441 };
442
443 enum dmamov_dst {
444         SAR = 0,
445         CCR,
446         DAR,
447 };
448
449 enum pl330_dst {
450         SRC = 0,
451         DST,
452 };
453
454 enum pl330_cond {
455         SINGLE,
456         BURST,
457         ALWAYS,
458 };
459
460 struct _pl330_req {
461         u32 mc_bus;
462         void *mc_cpu;
463         /* Number of bytes taken to setup MC for the req */
464         u32 mc_len;
465         struct pl330_req *r;
466 };
467
468 /* ToBeDone for tasklet */
469 struct _pl330_tbd {
470         bool reset_dmac;
471         bool reset_mngr;
472         u8 reset_chan;
473 };
474
475 /* A DMAC Thread */
476 struct pl330_thread {
477         u8 id;
478         int ev;
479         /* If the channel is not yet acquired by any client */
480         bool free;
481         /* Parent DMAC */
482         struct pl330_dmac *dmac;
483         /* Only two at a time */
484         struct _pl330_req req[2];
485         /* Index of the last enqueued request */
486         unsigned lstenq;
487         /* Index of the last submitted request or -1 if the DMA is stopped */
488         int req_running;
489 };
490
491 enum pl330_dmac_state {
492         UNINIT,
493         INIT,
494         DYING,
495 };
496
497 /* A DMAC */
498 struct pl330_dmac {
499         spinlock_t              lock;
500         /* Holds list of reqs with due callbacks */
501         struct list_head        req_done;
502         /* Pointer to platform specific stuff */
503         struct pl330_info       *pinfo;
504         /* Maximum possible events/irqs */
505         int                     events[32];
506         /* BUS address of MicroCode buffer */
507         u32                     mcode_bus;
508         /* CPU address of MicroCode buffer */
509         void                    *mcode_cpu;
510         /* List of all Channel threads */
511         struct pl330_thread     *channels;
512         /* Pointer to the MANAGER thread */
513         struct pl330_thread     *manager;
514         /* To handle bad news in interrupt */
515         struct tasklet_struct   tasks;
516         struct _pl330_tbd       dmac_tbd;
517         /* State of DMAC operation */
518         enum pl330_dmac_state   state;
519 };
520
521 enum desc_status {
522         /* In the DMAC pool */
523         FREE,
524         /*
525          * Allocated to some channel during prep_xxx
526          * Also may be sitting on the work_list.
527          */
528         PREP,
529         /*
530          * Sitting on the work_list and already submitted
531          * to the PL330 core. Not more than two descriptors
532          * of a channel can be BUSY at any time.
533          */
534         BUSY,
535         /*
536          * Sitting on the channel work_list but xfer done
537          * by PL330 core
538          */
539         DONE,
540 };
541
542 struct dma_pl330_chan {
543         /* Schedule desc completion */
544         struct tasklet_struct task;
545
546         /* DMA-Engine Channel */
547         struct dma_chan chan;
548
549         /* List of to be xfered descriptors */
550         struct list_head work_list;
551
552         /* Pointer to the DMAC that manages this channel,
553          * NULL if the channel is available to be acquired.
554          * As the parent, this DMAC also provides descriptors
555          * to the channel.
556          */
557         struct dma_pl330_dmac *dmac;
558
559         /* To protect channel manipulation */
560         spinlock_t lock;
561
562         /* Token of a hardware channel thread of PL330 DMAC
563          * NULL if the channel is available to be acquired.
564          */
565         void *pl330_chid;
566
567         /* For D-to-M and M-to-D channels */
568         int burst_sz; /* the peripheral fifo width */
569         int burst_len; /* the number of burst */
570         dma_addr_t fifo_addr;
571
572         /* for cyclic capability */
573         bool cyclic;
574 };
575
576 struct dma_pl330_dmac {
577         struct pl330_info pif;
578
579         /* DMA-Engine Device */
580         struct dma_device ddma;
581
582         /* Pool of descriptors available for the DMAC's channels */
583         struct list_head desc_pool;
584         /* To protect desc_pool manipulation */
585         spinlock_t pool_lock;
586
587         /* Peripheral channels connected to this DMAC */
588         struct dma_pl330_chan *peripherals; /* keep at end */
589
590         struct clk *clk;
591 };
592
593 struct dma_pl330_desc {
594         /* To attach to a queue as child */
595         struct list_head node;
596
597         /* Descriptor for the DMA Engine API */
598         struct dma_async_tx_descriptor txd;
599
600         /* Xfer for PL330 core */
601         struct pl330_xfer px;
602
603         struct pl330_reqcfg rqcfg;
604         struct pl330_req req;
605
606         enum desc_status status;
607
608         /* The channel which currently holds this desc */
609         struct dma_pl330_chan *pchan;
610 };
611
612 static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
613 {
614         if (r && r->xfer_cb)
615                 r->xfer_cb(r->token, err);
616 }
617
618 static inline bool _queue_empty(struct pl330_thread *thrd)
619 {
620         return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
621                 ? true : false;
622 }
623
624 static inline bool _queue_full(struct pl330_thread *thrd)
625 {
626         return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
627                 ? false : true;
628 }
629
630 static inline bool is_manager(struct pl330_thread *thrd)
631 {
632         struct pl330_dmac *pl330 = thrd->dmac;
633
634         /* MANAGER is indexed at the end */
635         if (thrd->id == pl330->pinfo->pcfg.num_chan)
636                 return true;
637         else
638                 return false;
639 }
640
641 /* If manager of the thread is in Non-Secure mode */
642 static inline bool _manager_ns(struct pl330_thread *thrd)
643 {
644         struct pl330_dmac *pl330 = thrd->dmac;
645
646         return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
647 }
648
649 static inline u32 get_id(struct pl330_info *pi, u32 off)
650 {
651         void __iomem *regs = pi->base;
652         u32 id = 0;
653
654         id |= (readb(regs + off + 0x0) << 0);
655         id |= (readb(regs + off + 0x4) << 8);
656         id |= (readb(regs + off + 0x8) << 16);
657         id |= (readb(regs + off + 0xc) << 24);
658
659         return id;
660 }
661
662 static inline u32 get_revision(u32 periph_id)
663 {
664         return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
665 }
666
667 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
668                 enum pl330_dst da, u16 val)
669 {
670         if (dry_run)
671                 return SZ_DMAADDH;
672
673         buf[0] = CMD_DMAADDH;
674         buf[0] |= (da << 1);
675         *((u16 *)&buf[1]) = val;
676
677         PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
678                 da == 1 ? "DA" : "SA", val);
679
680         return SZ_DMAADDH;
681 }
682
683 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
684 {
685         if (dry_run)
686                 return SZ_DMAEND;
687
688         buf[0] = CMD_DMAEND;
689
690         PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
691
692         return SZ_DMAEND;
693 }
694
695 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
696 {
697         if (dry_run)
698                 return SZ_DMAFLUSHP;
699
700         buf[0] = CMD_DMAFLUSHP;
701
702         peri &= 0x1f;
703         peri <<= 3;
704         buf[1] = peri;
705
706         PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
707
708         return SZ_DMAFLUSHP;
709 }
710
711 static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
712 {
713         if (dry_run)
714                 return SZ_DMALD;
715
716         buf[0] = CMD_DMALD;
717
718         if (cond == SINGLE)
719                 buf[0] |= (0 << 1) | (1 << 0);
720         else if (cond == BURST)
721                 buf[0] |= (1 << 1) | (1 << 0);
722
723         PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
724                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
725
726         return SZ_DMALD;
727 }
728
729 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
730                 enum pl330_cond cond, u8 peri)
731 {
732         if (dry_run)
733                 return SZ_DMALDP;
734
735         buf[0] = CMD_DMALDP;
736
737         if (cond == BURST)
738                 buf[0] |= (1 << 1);
739
740         peri &= 0x1f;
741         peri <<= 3;
742         buf[1] = peri;
743
744         PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
745                 cond == SINGLE ? 'S' : 'B', peri >> 3);
746
747         return SZ_DMALDP;
748 }
749
750 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
751                 unsigned loop, u8 cnt)
752 {
753         if (dry_run)
754                 return SZ_DMALP;
755
756         buf[0] = CMD_DMALP;
757
758         if (loop)
759                 buf[0] |= (1 << 1);
760
761         cnt--; /* DMAC increments by 1 internally */
762         buf[1] = cnt;
763
764         PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
765
766         return SZ_DMALP;
767 }
768
769 struct _arg_LPEND {
770         enum pl330_cond cond;
771         bool forever;
772         unsigned loop;
773         u8 bjump;
774 };
775
776 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
777                 const struct _arg_LPEND *arg)
778 {
779         enum pl330_cond cond = arg->cond;
780         bool forever = arg->forever;
781         unsigned loop = arg->loop;
782         u8 bjump = arg->bjump;
783
784         if (dry_run)
785                 return SZ_DMALPEND;
786
787         buf[0] = CMD_DMALPEND;
788
789         if (loop)
790                 buf[0] |= (1 << 2);
791
792         if (!forever)
793                 buf[0] |= (1 << 4);
794
795         if (cond == SINGLE)
796                 buf[0] |= (0 << 1) | (1 << 0);
797         else if (cond == BURST)
798                 buf[0] |= (1 << 1) | (1 << 0);
799
800         buf[1] = bjump;
801
802         PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
803                         forever ? "FE" : "END",
804                         cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
805                         loop ? '1' : '0',
806                         bjump);
807
808         return SZ_DMALPEND;
809 }
810
811 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
812 {
813         if (dry_run)
814                 return SZ_DMAKILL;
815
816         buf[0] = CMD_DMAKILL;
817
818         return SZ_DMAKILL;
819 }
820
821 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
822                 enum dmamov_dst dst, u32 val)
823 {
824         if (dry_run)
825                 return SZ_DMAMOV;
826
827         buf[0] = CMD_DMAMOV;
828         buf[1] = dst;
829         *((u32 *)&buf[2]) = val;
830
831         PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
832                 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
833
834         return SZ_DMAMOV;
835 }
836
837 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
838 {
839         if (dry_run)
840                 return SZ_DMANOP;
841
842         buf[0] = CMD_DMANOP;
843
844         PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
845
846         return SZ_DMANOP;
847 }
848
849 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
850 {
851         if (dry_run)
852                 return SZ_DMARMB;
853
854         buf[0] = CMD_DMARMB;
855
856         PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
857
858         return SZ_DMARMB;
859 }
860
861 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
862 {
863         if (dry_run)
864                 return SZ_DMASEV;
865
866         buf[0] = CMD_DMASEV;
867
868         ev &= 0x1f;
869         ev <<= 3;
870         buf[1] = ev;
871
872         PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
873
874         return SZ_DMASEV;
875 }
876
877 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
878 {
879         if (dry_run)
880                 return SZ_DMAST;
881
882         buf[0] = CMD_DMAST;
883
884         if (cond == SINGLE)
885                 buf[0] |= (0 << 1) | (1 << 0);
886         else if (cond == BURST)
887                 buf[0] |= (1 << 1) | (1 << 0);
888
889         PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
890                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
891
892         return SZ_DMAST;
893 }
894
895 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
896                 enum pl330_cond cond, u8 peri)
897 {
898         if (dry_run)
899                 return SZ_DMASTP;
900
901         buf[0] = CMD_DMASTP;
902
903         if (cond == BURST)
904                 buf[0] |= (1 << 1);
905
906         peri &= 0x1f;
907         peri <<= 3;
908         buf[1] = peri;
909
910         PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
911                 cond == SINGLE ? 'S' : 'B', peri >> 3);
912
913         return SZ_DMASTP;
914 }
915
916 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
917 {
918         if (dry_run)
919                 return SZ_DMASTZ;
920
921         buf[0] = CMD_DMASTZ;
922
923         PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
924
925         return SZ_DMASTZ;
926 }
927
928 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
929                 unsigned invalidate)
930 {
931         if (dry_run)
932                 return SZ_DMAWFE;
933
934         buf[0] = CMD_DMAWFE;
935
936         ev &= 0x1f;
937         ev <<= 3;
938         buf[1] = ev;
939
940         if (invalidate)
941                 buf[1] |= (1 << 1);
942
943         PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
944                 ev >> 3, invalidate ? ", I" : "");
945
946         return SZ_DMAWFE;
947 }
948
949 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
950                 enum pl330_cond cond, u8 peri)
951 {
952         if (dry_run)
953                 return SZ_DMAWFP;
954
955         buf[0] = CMD_DMAWFP;
956
957         if (cond == SINGLE)
958                 buf[0] |= (0 << 1) | (0 << 0);
959         else if (cond == BURST)
960                 buf[0] |= (1 << 1) | (0 << 0);
961         else
962                 buf[0] |= (0 << 1) | (1 << 0);
963
964         peri &= 0x1f;
965         peri <<= 3;
966         buf[1] = peri;
967
968         PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
969                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
970
971         return SZ_DMAWFP;
972 }
973
974 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
975 {
976         if (dry_run)
977                 return SZ_DMAWMB;
978
979         buf[0] = CMD_DMAWMB;
980
981         PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
982
983         return SZ_DMAWMB;
984 }
985
986 struct _arg_GO {
987         u8 chan;
988         u32 addr;
989         unsigned ns;
990 };
991
992 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
993                 const struct _arg_GO *arg)
994 {
995         u8 chan = arg->chan;
996         u32 addr = arg->addr;
997         unsigned ns = arg->ns;
998
999         if (dry_run)
1000                 return SZ_DMAGO;
1001
1002         buf[0] = CMD_DMAGO;
1003         buf[0] |= (ns << 1);
1004
1005         buf[1] = chan & 0x7;
1006
1007         *((u32 *)&buf[2]) = addr;
1008
1009         return SZ_DMAGO;
1010 }
1011
1012 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
1013
1014 /* Returns Time-Out */
1015 static bool _until_dmac_idle(struct pl330_thread *thrd)
1016 {
1017         void __iomem *regs = thrd->dmac->pinfo->base;
1018         unsigned long loops = msecs_to_loops(5);
1019
1020         do {
1021                 /* Until Manager is Idle */
1022                 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
1023                         break;
1024
1025                 cpu_relax();
1026         } while (--loops);
1027
1028         if (!loops)
1029                 return true;
1030
1031         return false;
1032 }
1033
1034 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
1035                 u8 insn[], bool as_manager)
1036 {
1037         void __iomem *regs = thrd->dmac->pinfo->base;
1038         u32 val;
1039
1040         val = (insn[0] << 16) | (insn[1] << 24);
1041         if (!as_manager) {
1042                 val |= (1 << 0);
1043                 val |= (thrd->id << 8); /* Channel Number */
1044         }
1045         writel(val, regs + DBGINST0);
1046
1047         val = *((u32 *)&insn[2]);
1048         writel(val, regs + DBGINST1);
1049
1050         /* If timed out due to halted state-machine */
1051         if (_until_dmac_idle(thrd)) {
1052                 dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
1053                 return;
1054         }
1055
1056         /* Get going */
1057         writel(0, regs + DBGCMD);
1058 }
1059
1060 /*
1061  * Mark a _pl330_req as free.
1062  * We do it by writing DMAEND as the first instruction
1063  * because no valid request is going to have DMAEND as
1064  * its first instruction to execute.
1065  */
1066 static void mark_free(struct pl330_thread *thrd, int idx)
1067 {
1068         struct _pl330_req *req = &thrd->req[idx];
1069
1070         _emit_END(0, req->mc_cpu);
1071         req->mc_len = 0;
1072
1073         thrd->req_running = -1;
1074 }
1075
1076 static inline u32 _state(struct pl330_thread *thrd)
1077 {
1078         void __iomem *regs = thrd->dmac->pinfo->base;
1079         u32 val;
1080
1081         if (is_manager(thrd))
1082                 val = readl(regs + DS) & 0xf;
1083         else
1084                 val = readl(regs + CS(thrd->id)) & 0xf;
1085
1086         switch (val) {
1087         case DS_ST_STOP:
1088                 return PL330_STATE_STOPPED;
1089         case DS_ST_EXEC:
1090                 return PL330_STATE_EXECUTING;
1091         case DS_ST_CMISS:
1092                 return PL330_STATE_CACHEMISS;
1093         case DS_ST_UPDTPC:
1094                 return PL330_STATE_UPDTPC;
1095         case DS_ST_WFE:
1096                 return PL330_STATE_WFE;
1097         case DS_ST_FAULT:
1098                 return PL330_STATE_FAULTING;
1099         case DS_ST_ATBRR:
1100                 if (is_manager(thrd))
1101                         return PL330_STATE_INVALID;
1102                 else
1103                         return PL330_STATE_ATBARRIER;
1104         case DS_ST_QBUSY:
1105                 if (is_manager(thrd))
1106                         return PL330_STATE_INVALID;
1107                 else
1108                         return PL330_STATE_QUEUEBUSY;
1109         case DS_ST_WFP:
1110                 if (is_manager(thrd))
1111                         return PL330_STATE_INVALID;
1112                 else
1113                         return PL330_STATE_WFP;
1114         case DS_ST_KILL:
1115                 if (is_manager(thrd))
1116                         return PL330_STATE_INVALID;
1117                 else
1118                         return PL330_STATE_KILLING;
1119         case DS_ST_CMPLT:
1120                 if (is_manager(thrd))
1121                         return PL330_STATE_INVALID;
1122                 else
1123                         return PL330_STATE_COMPLETING;
1124         case DS_ST_FLTCMP:
1125                 if (is_manager(thrd))
1126                         return PL330_STATE_INVALID;
1127                 else
1128                         return PL330_STATE_FAULT_COMPLETING;
1129         default:
1130                 return PL330_STATE_INVALID;
1131         }
1132 }
1133
1134 static void _stop(struct pl330_thread *thrd)
1135 {
1136         void __iomem *regs = thrd->dmac->pinfo->base;
1137         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1138
1139         if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1140                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1141
1142         /* Return if nothing needs to be done */
1143         if (_state(thrd) == PL330_STATE_COMPLETING
1144                   || _state(thrd) == PL330_STATE_KILLING
1145                   || _state(thrd) == PL330_STATE_STOPPED)
1146                 return;
1147
1148         _emit_KILL(0, insn);
1149
1150         /* Stop generating interrupts for SEV */
1151         writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1152
1153         _execute_DBGINSN(thrd, insn, is_manager(thrd));
1154 }
1155
1156 /* Start doing req 'idx' of thread 'thrd' */
1157 static bool _trigger(struct pl330_thread *thrd)
1158 {
1159         void __iomem *regs = thrd->dmac->pinfo->base;
1160         struct _pl330_req *req;
1161         struct pl330_req *r;
1162         struct _arg_GO go;
1163         unsigned ns;
1164         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1165         int idx;
1166
1167         /* Return if already ACTIVE */
1168         if (_state(thrd) != PL330_STATE_STOPPED)
1169                 return true;
1170
1171         idx = 1 - thrd->lstenq;
1172         if (!IS_FREE(&thrd->req[idx]))
1173                 req = &thrd->req[idx];
1174         else {
1175                 idx = thrd->lstenq;
1176                 if (!IS_FREE(&thrd->req[idx]))
1177                         req = &thrd->req[idx];
1178                 else
1179                         req = NULL;
1180         }
1181
1182         /* Return if no request */
1183         if (!req || !req->r)
1184                 return true;
1185
1186         r = req->r;
1187
1188         if (r->cfg)
1189                 ns = r->cfg->nonsecure ? 1 : 0;
1190         else if (readl(regs + CS(thrd->id)) & CS_CNS)
1191                 ns = 1;
1192         else
1193                 ns = 0;
1194
1195         /* See 'Abort Sources' point-4 at Page 2-25 */
1196         if (_manager_ns(thrd) && !ns)
1197                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
1198                         __func__, __LINE__);
1199
1200         go.chan = thrd->id;
1201         go.addr = req->mc_bus;
1202         go.ns = ns;
1203         _emit_GO(0, insn, &go);
1204
1205         /* Set to generate interrupts for SEV */
1206         writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1207
1208         /* Only manager can execute GO */
1209         _execute_DBGINSN(thrd, insn, true);
1210
1211         thrd->req_running = idx;
1212
1213         return true;
1214 }
1215
1216 static bool _start(struct pl330_thread *thrd)
1217 {
1218         switch (_state(thrd)) {
1219         case PL330_STATE_FAULT_COMPLETING:
1220                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1221
1222                 if (_state(thrd) == PL330_STATE_KILLING)
1223                         UNTIL(thrd, PL330_STATE_STOPPED)
1224
1225         case PL330_STATE_FAULTING:
1226                 _stop(thrd);
1227
1228         case PL330_STATE_KILLING:
1229         case PL330_STATE_COMPLETING:
1230                 UNTIL(thrd, PL330_STATE_STOPPED)
1231
1232         case PL330_STATE_STOPPED:
1233                 return _trigger(thrd);
1234
1235         case PL330_STATE_WFP:
1236         case PL330_STATE_QUEUEBUSY:
1237         case PL330_STATE_ATBARRIER:
1238         case PL330_STATE_UPDTPC:
1239         case PL330_STATE_CACHEMISS:
1240         case PL330_STATE_EXECUTING:
1241                 return true;
1242
1243         case PL330_STATE_WFE: /* For RESUME, nothing yet */
1244         default:
1245                 return false;
1246         }
1247 }
1248
1249 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1250                 const struct _xfer_spec *pxs, int cyc)
1251 {
1252         int off = 0;
1253         struct pl330_config *pcfg = pxs->r->cfg->pcfg;
1254
1255         /* check lock-up free version */
1256         if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1257                 while (cyc--) {
1258                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1259                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1260                 }
1261         } else {
1262                 while (cyc--) {
1263                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1264                         off += _emit_RMB(dry_run, &buf[off]);
1265                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1266                         off += _emit_WMB(dry_run, &buf[off]);
1267                 }
1268         }
1269
1270         return off;
1271 }
1272
1273 static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
1274                 const struct _xfer_spec *pxs, int cyc)
1275 {
1276         int off = 0;
1277
1278         while (cyc--) {
1279                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1280                 off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1281                 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1282                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1283         }
1284
1285         return off;
1286 }
1287
1288 static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
1289                 const struct _xfer_spec *pxs, int cyc)
1290 {
1291         int off = 0;
1292
1293         while (cyc--) {
1294                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1295                 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1296                 off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1297                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1298         }
1299
1300         return off;
1301 }
1302
1303 static int _bursts(unsigned dry_run, u8 buf[],
1304                 const struct _xfer_spec *pxs, int cyc)
1305 {
1306         int off = 0;
1307
1308         switch (pxs->r->rqtype) {
1309         case MEMTODEV:
1310                 off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
1311                 break;
1312         case DEVTOMEM:
1313                 off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
1314                 break;
1315         case MEMTOMEM:
1316                 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1317                 break;
1318         default:
1319                 off += 0x40000000; /* Scare off the Client */
1320                 break;
1321         }
1322
1323         return off;
1324 }
1325
1326 /* Returns bytes consumed and updates bursts */
1327 static inline int _loop(unsigned dry_run, u8 buf[],
1328                 unsigned long *bursts, const struct _xfer_spec *pxs)
1329 {
1330         int cyc, cycmax, szlp, szlpend, szbrst, off;
1331         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1332         struct _arg_LPEND lpend;
1333
1334         /* Max iterations possible in DMALP is 256 */
1335         if (*bursts >= 256*256) {
1336                 lcnt1 = 256;
1337                 lcnt0 = 256;
1338                 cyc = *bursts / lcnt1 / lcnt0;
1339         } else if (*bursts > 256) {
1340                 lcnt1 = 256;
1341                 lcnt0 = *bursts / lcnt1;
1342                 cyc = 1;
1343         } else {
1344                 lcnt1 = *bursts;
1345                 lcnt0 = 0;
1346                 cyc = 1;
1347         }
1348
1349         szlp = _emit_LP(1, buf, 0, 0);
1350         szbrst = _bursts(1, buf, pxs, 1);
1351
1352         lpend.cond = ALWAYS;
1353         lpend.forever = false;
1354         lpend.loop = 0;
1355         lpend.bjump = 0;
1356         szlpend = _emit_LPEND(1, buf, &lpend);
1357
1358         if (lcnt0) {
1359                 szlp *= 2;
1360                 szlpend *= 2;
1361         }
1362
1363         /*
1364          * Max bursts that we can unroll due to limit on the
1365          * size of backward jump that can be encoded in DMALPEND
1366          * which is 8-bits and hence 255
1367          */
1368         cycmax = (255 - (szlp + szlpend)) / szbrst;
1369
1370         cyc = (cycmax < cyc) ? cycmax : cyc;
1371
1372         off = 0;
1373
1374         if (lcnt0) {
1375                 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1376                 ljmp0 = off;
1377         }
1378
1379         off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1380         ljmp1 = off;
1381
1382         off += _bursts(dry_run, &buf[off], pxs, cyc);
1383
1384         lpend.cond = ALWAYS;
1385         lpend.forever = false;
1386         lpend.loop = 1;
1387         lpend.bjump = off - ljmp1;
1388         off += _emit_LPEND(dry_run, &buf[off], &lpend);
1389
1390         if (lcnt0) {
1391                 lpend.cond = ALWAYS;
1392                 lpend.forever = false;
1393                 lpend.loop = 0;
1394                 lpend.bjump = off - ljmp0;
1395                 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1396         }
1397
1398         *bursts = lcnt1 * cyc;
1399         if (lcnt0)
1400                 *bursts *= lcnt0;
1401
1402         return off;
1403 }
1404
1405 static inline int _setup_loops(unsigned dry_run, u8 buf[],
1406                 const struct _xfer_spec *pxs)
1407 {
1408         struct pl330_xfer *x = pxs->x;
1409         u32 ccr = pxs->ccr;
1410         unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1411         int off = 0;
1412
1413         while (bursts) {
1414                 c = bursts;
1415                 off += _loop(dry_run, &buf[off], &c, pxs);
1416                 bursts -= c;
1417         }
1418
1419         return off;
1420 }
1421
1422 static inline int _setup_xfer(unsigned dry_run, u8 buf[],
1423                 const struct _xfer_spec *pxs)
1424 {
1425         struct pl330_xfer *x = pxs->x;
1426         int off = 0;
1427
1428         /* DMAMOV SAR, x->src_addr */
1429         off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1430         /* DMAMOV DAR, x->dst_addr */
1431         off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1432
1433         /* Setup Loop(s) */
1434         off += _setup_loops(dry_run, &buf[off], pxs);
1435
1436         return off;
1437 }
1438
1439 /*
1440  * A req is a sequence of one or more xfer units.
1441  * Returns the number of bytes taken to setup the MC for the req.
1442  */
1443 static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
1444                 unsigned index, struct _xfer_spec *pxs)
1445 {
1446         struct _pl330_req *req = &thrd->req[index];
1447         struct pl330_xfer *x;
1448         u8 *buf = req->mc_cpu;
1449         int off = 0;
1450
1451         PL330_DBGMC_START(req->mc_bus);
1452
1453         /* DMAMOV CCR, ccr */
1454         off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1455
1456         x = pxs->r->x;
1457         do {
1458                 /* Error if xfer length is not aligned at burst size */
1459                 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1460                         return -EINVAL;
1461
1462                 pxs->x = x;
1463                 off += _setup_xfer(dry_run, &buf[off], pxs);
1464
1465                 x = x->next;
1466         } while (x);
1467
1468         /* DMASEV peripheral/event */
1469         off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1470         /* DMAEND */
1471         off += _emit_END(dry_run, &buf[off]);
1472
1473         return off;
1474 }
1475
1476 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1477 {
1478         u32 ccr = 0;
1479
1480         if (rqc->src_inc)
1481                 ccr |= CC_SRCINC;
1482
1483         if (rqc->dst_inc)
1484                 ccr |= CC_DSTINC;
1485
1486         /* We set same protection levels for Src and DST for now */
1487         if (rqc->privileged)
1488                 ccr |= CC_SRCPRI | CC_DSTPRI;
1489         if (rqc->nonsecure)
1490                 ccr |= CC_SRCNS | CC_DSTNS;
1491         if (rqc->insnaccess)
1492                 ccr |= CC_SRCIA | CC_DSTIA;
1493
1494         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1495         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1496
1497         ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1498         ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1499
1500         ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1501         ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1502
1503         ccr |= (rqc->swap << CC_SWAP_SHFT);
1504
1505         return ccr;
1506 }
1507
1508 static inline bool _is_valid(u32 ccr)
1509 {
1510         enum pl330_dstcachectrl dcctl;
1511         enum pl330_srccachectrl scctl;
1512
1513         dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
1514         scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
1515
1516         if (dcctl == DINVALID1 || dcctl == DINVALID2
1517                         || scctl == SINVALID1 || scctl == SINVALID2)
1518                 return false;
1519         else
1520                 return true;
1521 }
1522
1523 /*
1524  * Submit a list of xfers after which the client wants notification.
1525  * Client is not notified after each xfer unit, just once after all
1526  * xfer units are done or some error occurs.
1527  */
1528 static int pl330_submit_req(void *ch_id, struct pl330_req *r)
1529 {
1530         struct pl330_thread *thrd = ch_id;
1531         struct pl330_dmac *pl330;
1532         struct pl330_info *pi;
1533         struct _xfer_spec xs;
1534         unsigned long flags;
1535         void __iomem *regs;
1536         unsigned idx;
1537         u32 ccr;
1538         int ret = 0;
1539
1540         /* No Req or Unacquired Channel or DMAC */
1541         if (!r || !thrd || thrd->free)
1542                 return -EINVAL;
1543
1544         pl330 = thrd->dmac;
1545         pi = pl330->pinfo;
1546         regs = pi->base;
1547
1548         if (pl330->state == DYING
1549                 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1550                 dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
1551                         __func__, __LINE__);
1552                 return -EAGAIN;
1553         }
1554
1555         /* If request for non-existing peripheral */
1556         if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
1557                 dev_info(thrd->dmac->pinfo->dev,
1558                                 "%s:%d Invalid peripheral(%u)!\n",
1559                                 __func__, __LINE__, r->peri);
1560                 return -EINVAL;
1561         }
1562
1563         spin_lock_irqsave(&pl330->lock, flags);
1564
1565         if (_queue_full(thrd)) {
1566                 ret = -EAGAIN;
1567                 goto xfer_exit;
1568         }
1569
1570
1571         /* Use last settings, if not provided */
1572         if (r->cfg) {
1573                 /* Prefer Secure Channel */
1574                 if (!_manager_ns(thrd))
1575                         r->cfg->nonsecure = 0;
1576                 else
1577                         r->cfg->nonsecure = 1;
1578
1579                 ccr = _prepare_ccr(r->cfg);
1580         } else {
1581                 ccr = readl(regs + CC(thrd->id));
1582         }
1583
1584         /* If this req doesn't have valid xfer settings */
1585         if (!_is_valid(ccr)) {
1586                 ret = -EINVAL;
1587                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
1588                         __func__, __LINE__, ccr);
1589                 goto xfer_exit;
1590         }
1591
1592         idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
1593
1594         xs.ccr = ccr;
1595         xs.r = r;
1596
1597         /* First dry run to check if req is acceptable */
1598         ret = _setup_req(1, thrd, idx, &xs);
1599         if (ret < 0)
1600                 goto xfer_exit;
1601
1602         if (ret > pi->mcbufsz / 2) {
1603                 dev_info(thrd->dmac->pinfo->dev,
1604                         "%s:%d Trying increasing mcbufsz\n",
1605                                 __func__, __LINE__);
1606                 ret = -ENOMEM;
1607                 goto xfer_exit;
1608         }
1609
1610         /* Hook the request */
1611         thrd->lstenq = idx;
1612         thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
1613         thrd->req[idx].r = r;
1614
1615         ret = 0;
1616
1617 xfer_exit:
1618         spin_unlock_irqrestore(&pl330->lock, flags);
1619
1620         return ret;
1621 }
1622
1623 static void pl330_dotask(unsigned long data)
1624 {
1625         struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1626         struct pl330_info *pi = pl330->pinfo;
1627         unsigned long flags;
1628         int i;
1629
1630         spin_lock_irqsave(&pl330->lock, flags);
1631
1632         /* The DMAC itself gone nuts */
1633         if (pl330->dmac_tbd.reset_dmac) {
1634                 pl330->state = DYING;
1635                 /* Reset the manager too */
1636                 pl330->dmac_tbd.reset_mngr = true;
1637                 /* Clear the reset flag */
1638                 pl330->dmac_tbd.reset_dmac = false;
1639         }
1640
1641         if (pl330->dmac_tbd.reset_mngr) {
1642                 _stop(pl330->manager);
1643                 /* Reset all channels */
1644                 pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
1645                 /* Clear the reset flag */
1646                 pl330->dmac_tbd.reset_mngr = false;
1647         }
1648
1649         for (i = 0; i < pi->pcfg.num_chan; i++) {
1650
1651                 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1652                         struct pl330_thread *thrd = &pl330->channels[i];
1653                         void __iomem *regs = pi->base;
1654                         enum pl330_op_err err;
1655
1656                         _stop(thrd);
1657
1658                         if (readl(regs + FSC) & (1 << thrd->id))
1659                                 err = PL330_ERR_FAIL;
1660                         else
1661                                 err = PL330_ERR_ABORT;
1662
1663                         spin_unlock_irqrestore(&pl330->lock, flags);
1664
1665                         _callback(thrd->req[1 - thrd->lstenq].r, err);
1666                         _callback(thrd->req[thrd->lstenq].r, err);
1667
1668                         spin_lock_irqsave(&pl330->lock, flags);
1669
1670                         thrd->req[0].r = NULL;
1671                         thrd->req[1].r = NULL;
1672                         mark_free(thrd, 0);
1673                         mark_free(thrd, 1);
1674
1675                         /* Clear the reset flag */
1676                         pl330->dmac_tbd.reset_chan &= ~(1 << i);
1677                 }
1678         }
1679
1680         spin_unlock_irqrestore(&pl330->lock, flags);
1681
1682         return;
1683 }
1684
1685 /* Returns 1 if state was updated, 0 otherwise */
1686 static int pl330_update(const struct pl330_info *pi)
1687 {
1688         struct pl330_req *rqdone, *tmp;
1689         struct pl330_dmac *pl330;
1690         unsigned long flags;
1691         void __iomem *regs;
1692         u32 val;
1693         int id, ev, ret = 0;
1694
1695         if (!pi || !pi->pl330_data)
1696                 return 0;
1697
1698         regs = pi->base;
1699         pl330 = pi->pl330_data;
1700
1701         spin_lock_irqsave(&pl330->lock, flags);
1702
1703         val = readl(regs + FSM) & 0x1;
1704         if (val)
1705                 pl330->dmac_tbd.reset_mngr = true;
1706         else
1707                 pl330->dmac_tbd.reset_mngr = false;
1708
1709         val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
1710         pl330->dmac_tbd.reset_chan |= val;
1711         if (val) {
1712                 int i = 0;
1713                 while (i < pi->pcfg.num_chan) {
1714                         if (val & (1 << i)) {
1715                                 dev_info(pi->dev,
1716                                         "Reset Channel-%d\t CS-%x FTC-%x\n",
1717                                                 i, readl(regs + CS(i)),
1718                                                 readl(regs + FTC(i)));
1719                                 _stop(&pl330->channels[i]);
1720                         }
1721                         i++;
1722                 }
1723         }
1724
1725         /* Check which event happened i.e, thread notified */
1726         val = readl(regs + ES);
1727         if (pi->pcfg.num_events < 32
1728                         && val & ~((1 << pi->pcfg.num_events) - 1)) {
1729                 pl330->dmac_tbd.reset_dmac = true;
1730                 dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
1731                 ret = 1;
1732                 goto updt_exit;
1733         }
1734
1735         for (ev = 0; ev < pi->pcfg.num_events; ev++) {
1736                 if (val & (1 << ev)) { /* Event occurred */
1737                         struct pl330_thread *thrd;
1738                         u32 inten = readl(regs + INTEN);
1739                         int active;
1740
1741                         /* Clear the event */
1742                         if (inten & (1 << ev))
1743                                 writel(1 << ev, regs + INTCLR);
1744
1745                         ret = 1;
1746
1747                         id = pl330->events[ev];
1748
1749                         thrd = &pl330->channels[id];
1750
1751                         active = thrd->req_running;
1752                         if (active == -1) /* Aborted */
1753                                 continue;
1754
1755                         /* Detach the req */
1756                         rqdone = thrd->req[active].r;
1757                         thrd->req[active].r = NULL;
1758
1759                         mark_free(thrd, active);
1760
1761                         /* Get going again ASAP */
1762                         _start(thrd);
1763
1764                         /* For now, just make a list of callbacks to be done */
1765                         list_add_tail(&rqdone->rqd, &pl330->req_done);
1766                 }
1767         }
1768
1769         /* Now that we are in no hurry, do the callbacks */
1770         list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
1771                 list_del(&rqdone->rqd);
1772
1773                 spin_unlock_irqrestore(&pl330->lock, flags);
1774                 _callback(rqdone, PL330_ERR_NONE);
1775                 spin_lock_irqsave(&pl330->lock, flags);
1776         }
1777
1778 updt_exit:
1779         spin_unlock_irqrestore(&pl330->lock, flags);
1780
1781         if (pl330->dmac_tbd.reset_dmac
1782                         || pl330->dmac_tbd.reset_mngr
1783                         || pl330->dmac_tbd.reset_chan) {
1784                 ret = 1;
1785                 tasklet_schedule(&pl330->tasks);
1786         }
1787
1788         return ret;
1789 }
1790
1791 static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
1792 {
1793         struct pl330_thread *thrd = ch_id;
1794         struct pl330_dmac *pl330;
1795         unsigned long flags;
1796         int ret = 0, active;
1797
1798         if (!thrd || thrd->free || thrd->dmac->state == DYING)
1799                 return -EINVAL;
1800
1801         pl330 = thrd->dmac;
1802         active = thrd->req_running;
1803
1804         spin_lock_irqsave(&pl330->lock, flags);
1805
1806         switch (op) {
1807         case PL330_OP_FLUSH:
1808                 /* Make sure the channel is stopped */
1809                 _stop(thrd);
1810
1811                 thrd->req[0].r = NULL;
1812                 thrd->req[1].r = NULL;
1813                 mark_free(thrd, 0);
1814                 mark_free(thrd, 1);
1815                 break;
1816
1817         case PL330_OP_ABORT:
1818                 /* Make sure the channel is stopped */
1819                 _stop(thrd);
1820
1821                 /* ABORT is only for the active req */
1822                 if (active == -1)
1823                         break;
1824
1825                 thrd->req[active].r = NULL;
1826                 mark_free(thrd, active);
1827
1828                 /* Start the next */
1829         case PL330_OP_START:
1830                 if ((active == -1) && !_start(thrd))
1831                         ret = -EIO;
1832                 break;
1833
1834         default:
1835                 ret = -EINVAL;
1836         }
1837
1838         spin_unlock_irqrestore(&pl330->lock, flags);
1839         return ret;
1840 }
1841
1842 /* Reserve an event */
1843 static inline int _alloc_event(struct pl330_thread *thrd)
1844 {
1845         struct pl330_dmac *pl330 = thrd->dmac;
1846         struct pl330_info *pi = pl330->pinfo;
1847         int ev;
1848
1849         for (ev = 0; ev < pi->pcfg.num_events; ev++)
1850                 if (pl330->events[ev] == -1) {
1851                         pl330->events[ev] = thrd->id;
1852                         return ev;
1853                 }
1854
1855         return -1;
1856 }
1857
1858 static bool _chan_ns(const struct pl330_info *pi, int i)
1859 {
1860         return pi->pcfg.irq_ns & (1 << i);
1861 }
1862
1863 /* Upon success, returns IdentityToken for the
1864  * allocated channel, NULL otherwise.
1865  */
1866 static void *pl330_request_channel(const struct pl330_info *pi)
1867 {
1868         struct pl330_thread *thrd = NULL;
1869         struct pl330_dmac *pl330;
1870         unsigned long flags;
1871         int chans, i;
1872
1873         if (!pi || !pi->pl330_data)
1874                 return NULL;
1875
1876         pl330 = pi->pl330_data;
1877
1878         if (pl330->state == DYING)
1879                 return NULL;
1880
1881         chans = pi->pcfg.num_chan;
1882
1883         spin_lock_irqsave(&pl330->lock, flags);
1884
1885         for (i = 0; i < chans; i++) {
1886                 thrd = &pl330->channels[i];
1887                 if ((thrd->free) && (!_manager_ns(thrd) ||
1888                                         _chan_ns(pi, i))) {
1889                         thrd->ev = _alloc_event(thrd);
1890                         if (thrd->ev >= 0) {
1891                                 thrd->free = false;
1892                                 thrd->lstenq = 1;
1893                                 thrd->req[0].r = NULL;
1894                                 mark_free(thrd, 0);
1895                                 thrd->req[1].r = NULL;
1896                                 mark_free(thrd, 1);
1897                                 break;
1898                         }
1899                 }
1900                 thrd = NULL;
1901         }
1902
1903         spin_unlock_irqrestore(&pl330->lock, flags);
1904
1905         return thrd;
1906 }
1907
1908 /* Release an event */
1909 static inline void _free_event(struct pl330_thread *thrd, int ev)
1910 {
1911         struct pl330_dmac *pl330 = thrd->dmac;
1912         struct pl330_info *pi = pl330->pinfo;
1913
1914         /* If the event is valid and was held by the thread */
1915         if (ev >= 0 && ev < pi->pcfg.num_events
1916                         && pl330->events[ev] == thrd->id)
1917                 pl330->events[ev] = -1;
1918 }
1919
1920 static void pl330_release_channel(void *ch_id)
1921 {
1922         struct pl330_thread *thrd = ch_id;
1923         struct pl330_dmac *pl330;
1924         unsigned long flags;
1925
1926         if (!thrd || thrd->free)
1927                 return;
1928
1929         _stop(thrd);
1930
1931         _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
1932         _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
1933
1934         pl330 = thrd->dmac;
1935
1936         spin_lock_irqsave(&pl330->lock, flags);
1937         _free_event(thrd, thrd->ev);
1938         thrd->free = true;
1939         spin_unlock_irqrestore(&pl330->lock, flags);
1940 }
1941
1942 /* Initialize the structure for PL330 configuration, that can be used
1943  * by the client driver the make best use of the DMAC
1944  */
1945 static void read_dmac_config(struct pl330_info *pi)
1946 {
1947         void __iomem *regs = pi->base;
1948         u32 val;
1949
1950         val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1951         val &= CRD_DATA_WIDTH_MASK;
1952         pi->pcfg.data_bus_width = 8 * (1 << val);
1953
1954         val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1955         val &= CRD_DATA_BUFF_MASK;
1956         pi->pcfg.data_buf_dep = val + 1;
1957
1958         val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1959         val &= CR0_NUM_CHANS_MASK;
1960         val += 1;
1961         pi->pcfg.num_chan = val;
1962
1963         val = readl(regs + CR0);
1964         if (val & CR0_PERIPH_REQ_SET) {
1965                 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1966                 val += 1;
1967                 pi->pcfg.num_peri = val;
1968                 pi->pcfg.peri_ns = readl(regs + CR4);
1969         } else {
1970                 pi->pcfg.num_peri = 0;
1971         }
1972
1973         val = readl(regs + CR0);
1974         if (val & CR0_BOOT_MAN_NS)
1975                 pi->pcfg.mode |= DMAC_MODE_NS;
1976         else
1977                 pi->pcfg.mode &= ~DMAC_MODE_NS;
1978
1979         val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1980         val &= CR0_NUM_EVENTS_MASK;
1981         val += 1;
1982         pi->pcfg.num_events = val;
1983
1984         pi->pcfg.irq_ns = readl(regs + CR3);
1985
1986         pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
1987         pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
1988 }
1989
1990 static inline void _reset_thread(struct pl330_thread *thrd)
1991 {
1992         struct pl330_dmac *pl330 = thrd->dmac;
1993         struct pl330_info *pi = pl330->pinfo;
1994
1995         thrd->req[0].mc_cpu = pl330->mcode_cpu
1996                                 + (thrd->id * pi->mcbufsz);
1997         thrd->req[0].mc_bus = pl330->mcode_bus
1998                                 + (thrd->id * pi->mcbufsz);
1999         thrd->req[0].r = NULL;
2000         mark_free(thrd, 0);
2001
2002         thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
2003                                 + pi->mcbufsz / 2;
2004         thrd->req[1].mc_bus = thrd->req[0].mc_bus
2005                                 + pi->mcbufsz / 2;
2006         thrd->req[1].r = NULL;
2007         mark_free(thrd, 1);
2008 }
2009
2010 static int dmac_alloc_threads(struct pl330_dmac *pl330)
2011 {
2012         struct pl330_info *pi = pl330->pinfo;
2013         int chans = pi->pcfg.num_chan;
2014         struct pl330_thread *thrd;
2015         int i;
2016
2017         /* Allocate 1 Manager and 'chans' Channel threads */
2018         pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
2019                                         GFP_KERNEL);
2020         if (!pl330->channels)
2021                 return -ENOMEM;
2022
2023         /* Init Channel threads */
2024         for (i = 0; i < chans; i++) {
2025                 thrd = &pl330->channels[i];
2026                 thrd->id = i;
2027                 thrd->dmac = pl330;
2028                 _reset_thread(thrd);
2029                 thrd->free = true;
2030         }
2031
2032         /* MANAGER is indexed at the end */
2033         thrd = &pl330->channels[chans];
2034         thrd->id = chans;
2035         thrd->dmac = pl330;
2036         thrd->free = false;
2037         pl330->manager = thrd;
2038
2039         return 0;
2040 }
2041
2042 static int dmac_alloc_resources(struct pl330_dmac *pl330)
2043 {
2044         struct pl330_info *pi = pl330->pinfo;
2045         int chans = pi->pcfg.num_chan;
2046         int ret;
2047
2048         /*
2049          * Alloc MicroCode buffer for 'chans' Channel threads.
2050          * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
2051          */
2052         pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
2053                                 chans * pi->mcbufsz,
2054                                 &pl330->mcode_bus, GFP_KERNEL);
2055         if (!pl330->mcode_cpu) {
2056                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2057                         __func__, __LINE__);
2058                 return -ENOMEM;
2059         }
2060
2061         ret = dmac_alloc_threads(pl330);
2062         if (ret) {
2063                 dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
2064                         __func__, __LINE__);
2065                 dma_free_coherent(pi->dev,
2066                                 chans * pi->mcbufsz,
2067                                 pl330->mcode_cpu, pl330->mcode_bus);
2068                 return ret;
2069         }
2070
2071         return 0;
2072 }
2073
2074 static int pl330_add(struct pl330_info *pi)
2075 {
2076         struct pl330_dmac *pl330;
2077         void __iomem *regs;
2078         int i, ret;
2079
2080         if (!pi || !pi->dev)
2081                 return -EINVAL;
2082
2083         /* If already added */
2084         if (pi->pl330_data)
2085                 return -EINVAL;
2086
2087         /*
2088          * If the SoC can perform reset on the DMAC, then do it
2089          * before reading its configuration.
2090          */
2091         if (pi->dmac_reset)
2092                 pi->dmac_reset(pi);
2093
2094         regs = pi->base;
2095
2096         /* Check if we can handle this DMAC */
2097         if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
2098            || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
2099                 dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
2100                         get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
2101                 return -EINVAL;
2102         }
2103
2104         /* Read the configuration of the DMAC */
2105         read_dmac_config(pi);
2106
2107         if (pi->pcfg.num_events == 0) {
2108                 dev_err(pi->dev, "%s:%d Can't work without events!\n",
2109                         __func__, __LINE__);
2110                 return -EINVAL;
2111         }
2112
2113         pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
2114         if (!pl330) {
2115                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2116                         __func__, __LINE__);
2117                 return -ENOMEM;
2118         }
2119
2120         /* Assign the info structure and private data */
2121         pl330->pinfo = pi;
2122         pi->pl330_data = pl330;
2123
2124         spin_lock_init(&pl330->lock);
2125
2126         INIT_LIST_HEAD(&pl330->req_done);
2127
2128         /* Use default MC buffer size if not provided */
2129         if (!pi->mcbufsz)
2130                 pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
2131
2132         /* Mark all events as free */
2133         for (i = 0; i < pi->pcfg.num_events; i++)
2134                 pl330->events[i] = -1;
2135
2136         /* Allocate resources needed by the DMAC */
2137         ret = dmac_alloc_resources(pl330);
2138         if (ret) {
2139                 dev_err(pi->dev, "Unable to create channels for DMAC\n");
2140                 kfree(pl330);
2141                 return ret;
2142         }
2143
2144         tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
2145
2146         pl330->state = INIT;
2147
2148         return 0;
2149 }
2150
2151 static int dmac_free_threads(struct pl330_dmac *pl330)
2152 {
2153         struct pl330_info *pi = pl330->pinfo;
2154         int chans = pi->pcfg.num_chan;
2155         struct pl330_thread *thrd;
2156         int i;
2157
2158         /* Release Channel threads */
2159         for (i = 0; i < chans; i++) {
2160                 thrd = &pl330->channels[i];
2161                 pl330_release_channel((void *)thrd);
2162         }
2163
2164         /* Free memory */
2165         kfree(pl330->channels);
2166
2167         return 0;
2168 }
2169
2170 static void dmac_free_resources(struct pl330_dmac *pl330)
2171 {
2172         struct pl330_info *pi = pl330->pinfo;
2173         int chans = pi->pcfg.num_chan;
2174
2175         dmac_free_threads(pl330);
2176
2177         dma_free_coherent(pi->dev, chans * pi->mcbufsz,
2178                                 pl330->mcode_cpu, pl330->mcode_bus);
2179 }
2180
2181 static void pl330_del(struct pl330_info *pi)
2182 {
2183         struct pl330_dmac *pl330;
2184
2185         if (!pi || !pi->pl330_data)
2186                 return;
2187
2188         pl330 = pi->pl330_data;
2189
2190         pl330->state = UNINIT;
2191
2192         tasklet_kill(&pl330->tasks);
2193
2194         /* Free DMAC resources */
2195         dmac_free_resources(pl330);
2196
2197         kfree(pl330);
2198         pi->pl330_data = NULL;
2199 }
2200
2201 /* forward declaration */
2202 static struct amba_driver pl330_driver;
2203
2204 static inline struct dma_pl330_chan *
2205 to_pchan(struct dma_chan *ch)
2206 {
2207         if (!ch)
2208                 return NULL;
2209
2210         return container_of(ch, struct dma_pl330_chan, chan);
2211 }
2212
2213 static inline struct dma_pl330_desc *
2214 to_desc(struct dma_async_tx_descriptor *tx)
2215 {
2216         return container_of(tx, struct dma_pl330_desc, txd);
2217 }
2218
2219 static inline void free_desc_list(struct list_head *list)
2220 {
2221         struct dma_pl330_dmac *pdmac;
2222         struct dma_pl330_desc *desc;
2223         struct dma_pl330_chan *pch = NULL;
2224         unsigned long flags;
2225
2226         /* Finish off the work list */
2227         list_for_each_entry(desc, list, node) {
2228                 dma_async_tx_callback callback;
2229                 void *param;
2230
2231                 /* All desc in a list belong to same channel */
2232                 pch = desc->pchan;
2233                 callback = desc->txd.callback;
2234                 param = desc->txd.callback_param;
2235
2236                 if (callback)
2237                         callback(param);
2238
2239                 desc->pchan = NULL;
2240         }
2241
2242         /* pch will be unset if list was empty */
2243         if (!pch)
2244                 return;
2245
2246         pdmac = pch->dmac;
2247
2248         spin_lock_irqsave(&pdmac->pool_lock, flags);
2249         list_splice_tail_init(list, &pdmac->desc_pool);
2250         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2251 }
2252
2253 static inline void handle_cyclic_desc_list(struct list_head *list)
2254 {
2255         struct dma_pl330_desc *desc;
2256         struct dma_pl330_chan *pch = NULL;
2257         unsigned long flags;
2258
2259         list_for_each_entry(desc, list, node) {
2260                 dma_async_tx_callback callback;
2261
2262                 /* Change status to reload it */
2263                 desc->status = PREP;
2264                 pch = desc->pchan;
2265                 callback = desc->txd.callback;
2266                 if (callback)
2267                         callback(desc->txd.callback_param);
2268         }
2269
2270         /* pch will be unset if list was empty */
2271         if (!pch)
2272                 return;
2273
2274         spin_lock_irqsave(&pch->lock, flags);
2275         list_splice_tail_init(list, &pch->work_list);
2276         spin_unlock_irqrestore(&pch->lock, flags);
2277 }
2278
2279 static inline void fill_queue(struct dma_pl330_chan *pch)
2280 {
2281         struct dma_pl330_desc *desc;
2282         int ret;
2283
2284         list_for_each_entry(desc, &pch->work_list, node) {
2285
2286                 /* If already submitted */
2287                 if (desc->status == BUSY)
2288                         break;
2289
2290                 ret = pl330_submit_req(pch->pl330_chid,
2291                                                 &desc->req);
2292                 if (!ret) {
2293                         desc->status = BUSY;
2294                         break;
2295                 } else if (ret == -EAGAIN) {
2296                         /* QFull or DMAC Dying */
2297                         break;
2298                 } else {
2299                         /* Unacceptable request */
2300                         desc->status = DONE;
2301                         dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
2302                                         __func__, __LINE__, desc->txd.cookie);
2303                         tasklet_schedule(&pch->task);
2304                 }
2305         }
2306 }
2307
2308 static void pl330_tasklet(unsigned long data)
2309 {
2310         struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2311         struct dma_pl330_desc *desc, *_dt;
2312         unsigned long flags;
2313         LIST_HEAD(list);
2314
2315         spin_lock_irqsave(&pch->lock, flags);
2316
2317         /* Pick up ripe tomatoes */
2318         list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2319                 if (desc->status == DONE) {
2320                         if (!pch->cyclic)
2321                                 dma_cookie_complete(&desc->txd);
2322                         list_move_tail(&desc->node, &list);
2323                 }
2324
2325         /* Try to submit a req imm. next to the last completed cookie */
2326         fill_queue(pch);
2327
2328         /* Make sure the PL330 Channel thread is active */
2329         pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
2330
2331         spin_unlock_irqrestore(&pch->lock, flags);
2332
2333         if (pch->cyclic)
2334                 handle_cyclic_desc_list(&list);
2335         else
2336                 free_desc_list(&list);
2337 }
2338
2339 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
2340 {
2341         struct dma_pl330_desc *desc = token;
2342         struct dma_pl330_chan *pch = desc->pchan;
2343         unsigned long flags;
2344
2345         /* If desc aborted */
2346         if (!pch)
2347                 return;
2348
2349         spin_lock_irqsave(&pch->lock, flags);
2350
2351         desc->status = DONE;
2352
2353         spin_unlock_irqrestore(&pch->lock, flags);
2354
2355         tasklet_schedule(&pch->task);
2356 }
2357
2358 bool pl330_filter(struct dma_chan *chan, void *param)
2359 {
2360         u8 *peri_id;
2361
2362         if (chan->device->dev->driver != &pl330_driver.drv)
2363                 return false;
2364
2365 #ifdef CONFIG_OF
2366         if (chan->device->dev->of_node) {
2367                 const __be32 *prop_value;
2368                 phandle phandle;
2369                 struct device_node *node;
2370
2371                 prop_value = ((struct property *)param)->value;
2372                 phandle = be32_to_cpup(prop_value++);
2373                 node = of_find_node_by_phandle(phandle);
2374                 return ((chan->private == node) &&
2375                                 (chan->chan_id == be32_to_cpup(prop_value)));
2376         }
2377 #endif
2378
2379         peri_id = chan->private;
2380         return *peri_id == (unsigned)param;
2381 }
2382 EXPORT_SYMBOL(pl330_filter);
2383
2384 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2385 {
2386         struct dma_pl330_chan *pch = to_pchan(chan);
2387         struct dma_pl330_dmac *pdmac = pch->dmac;
2388         unsigned long flags;
2389
2390         spin_lock_irqsave(&pch->lock, flags);
2391
2392         dma_cookie_init(chan);
2393         pch->cyclic = false;
2394
2395         pch->pl330_chid = pl330_request_channel(&pdmac->pif);
2396         if (!pch->pl330_chid) {
2397                 spin_unlock_irqrestore(&pch->lock, flags);
2398                 return 0;
2399         }
2400
2401         tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2402
2403         spin_unlock_irqrestore(&pch->lock, flags);
2404
2405         return 1;
2406 }
2407
2408 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
2409 {
2410         struct dma_pl330_chan *pch = to_pchan(chan);
2411         struct dma_pl330_desc *desc, *_dt;
2412         unsigned long flags;
2413         struct dma_pl330_dmac *pdmac = pch->dmac;
2414         struct dma_slave_config *slave_config;
2415         LIST_HEAD(list);
2416
2417         switch (cmd) {
2418         case DMA_TERMINATE_ALL:
2419                 spin_lock_irqsave(&pch->lock, flags);
2420
2421                 /* FLUSH the PL330 Channel thread */
2422                 pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
2423
2424                 /* Mark all desc done */
2425                 list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
2426                         desc->status = DONE;
2427                         list_move_tail(&desc->node, &list);
2428                 }
2429
2430                 list_splice_tail_init(&list, &pdmac->desc_pool);
2431                 spin_unlock_irqrestore(&pch->lock, flags);
2432                 break;
2433         case DMA_SLAVE_CONFIG:
2434                 slave_config = (struct dma_slave_config *)arg;
2435
2436                 if (slave_config->direction == DMA_MEM_TO_DEV) {
2437                         if (slave_config->dst_addr)
2438                                 pch->fifo_addr = slave_config->dst_addr;
2439                         if (slave_config->dst_addr_width)
2440                                 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2441                         if (slave_config->dst_maxburst)
2442                                 pch->burst_len = slave_config->dst_maxburst;
2443                 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2444                         if (slave_config->src_addr)
2445                                 pch->fifo_addr = slave_config->src_addr;
2446                         if (slave_config->src_addr_width)
2447                                 pch->burst_sz = __ffs(slave_config->src_addr_width);
2448                         if (slave_config->src_maxburst)
2449                                 pch->burst_len = slave_config->src_maxburst;
2450                 }
2451                 break;
2452         default:
2453                 dev_err(pch->dmac->pif.dev, "Not supported command.\n");
2454                 return -ENXIO;
2455         }
2456
2457         return 0;
2458 }
2459
2460 static void pl330_free_chan_resources(struct dma_chan *chan)
2461 {
2462         struct dma_pl330_chan *pch = to_pchan(chan);
2463         unsigned long flags;
2464
2465         spin_lock_irqsave(&pch->lock, flags);
2466
2467         tasklet_kill(&pch->task);
2468
2469         pl330_release_channel(pch->pl330_chid);
2470         pch->pl330_chid = NULL;
2471
2472         if (pch->cyclic)
2473                 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2474
2475         spin_unlock_irqrestore(&pch->lock, flags);
2476 }
2477
2478 static enum dma_status
2479 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2480                  struct dma_tx_state *txstate)
2481 {
2482         return dma_cookie_status(chan, cookie, txstate);
2483 }
2484
2485 static void pl330_issue_pending(struct dma_chan *chan)
2486 {
2487         pl330_tasklet((unsigned long) to_pchan(chan));
2488 }
2489
2490 /*
2491  * We returned the last one of the circular list of descriptor(s)
2492  * from prep_xxx, so the argument to submit corresponds to the last
2493  * descriptor of the list.
2494  */
2495 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2496 {
2497         struct dma_pl330_desc *desc, *last = to_desc(tx);
2498         struct dma_pl330_chan *pch = to_pchan(tx->chan);
2499         dma_cookie_t cookie;
2500         unsigned long flags;
2501
2502         spin_lock_irqsave(&pch->lock, flags);
2503
2504         /* Assign cookies to all nodes */
2505         while (!list_empty(&last->node)) {
2506                 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2507
2508                 dma_cookie_assign(&desc->txd);
2509
2510                 list_move_tail(&desc->node, &pch->work_list);
2511         }
2512
2513         cookie = dma_cookie_assign(&last->txd);
2514         list_add_tail(&last->node, &pch->work_list);
2515         spin_unlock_irqrestore(&pch->lock, flags);
2516
2517         return cookie;
2518 }
2519
2520 static inline void _init_desc(struct dma_pl330_desc *desc)
2521 {
2522         desc->pchan = NULL;
2523         desc->req.x = &desc->px;
2524         desc->req.token = desc;
2525         desc->rqcfg.swap = SWAP_NO;
2526         desc->rqcfg.privileged = 0;
2527         desc->rqcfg.insnaccess = 0;
2528         desc->rqcfg.scctl = SCCTRL0;
2529         desc->rqcfg.dcctl = DCCTRL0;
2530         desc->req.cfg = &desc->rqcfg;
2531         desc->req.xfer_cb = dma_pl330_rqcb;
2532         desc->txd.tx_submit = pl330_tx_submit;
2533
2534         INIT_LIST_HEAD(&desc->node);
2535 }
2536
2537 /* Returns the number of descriptors added to the DMAC pool */
2538 static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
2539 {
2540         struct dma_pl330_desc *desc;
2541         unsigned long flags;
2542         int i;
2543
2544         if (!pdmac)
2545                 return 0;
2546
2547         desc = kmalloc(count * sizeof(*desc), flg);
2548         if (!desc)
2549                 return 0;
2550
2551         spin_lock_irqsave(&pdmac->pool_lock, flags);
2552
2553         for (i = 0; i < count; i++) {
2554                 _init_desc(&desc[i]);
2555                 list_add_tail(&desc[i].node, &pdmac->desc_pool);
2556         }
2557
2558         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2559
2560         return count;
2561 }
2562
2563 static struct dma_pl330_desc *
2564 pluck_desc(struct dma_pl330_dmac *pdmac)
2565 {
2566         struct dma_pl330_desc *desc = NULL;
2567         unsigned long flags;
2568
2569         if (!pdmac)
2570                 return NULL;
2571
2572         spin_lock_irqsave(&pdmac->pool_lock, flags);
2573
2574         if (!list_empty(&pdmac->desc_pool)) {
2575                 desc = list_entry(pdmac->desc_pool.next,
2576                                 struct dma_pl330_desc, node);
2577
2578                 list_del_init(&desc->node);
2579
2580                 desc->status = PREP;
2581                 desc->txd.callback = NULL;
2582         }
2583
2584         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2585
2586         return desc;
2587 }
2588
2589 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2590 {
2591         struct dma_pl330_dmac *pdmac = pch->dmac;
2592         u8 *peri_id = pch->chan.private;
2593         struct dma_pl330_desc *desc;
2594
2595         /* Pluck one desc from the pool of DMAC */
2596         desc = pluck_desc(pdmac);
2597
2598         /* If the DMAC pool is empty, alloc new */
2599         if (!desc) {
2600                 if (!add_desc(pdmac, GFP_ATOMIC, 1))
2601                         return NULL;
2602
2603                 /* Try again */
2604                 desc = pluck_desc(pdmac);
2605                 if (!desc) {
2606                         dev_err(pch->dmac->pif.dev,
2607                                 "%s:%d ALERT!\n", __func__, __LINE__);
2608                         return NULL;
2609                 }
2610         }
2611
2612         /* Initialize the descriptor */
2613         desc->pchan = pch;
2614         desc->txd.cookie = 0;
2615         async_tx_ack(&desc->txd);
2616
2617         desc->req.peri = peri_id ? pch->chan.chan_id : 0;
2618         desc->rqcfg.pcfg = &pch->dmac->pif.pcfg;
2619
2620         dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2621
2622         return desc;
2623 }
2624
2625 static inline void fill_px(struct pl330_xfer *px,
2626                 dma_addr_t dst, dma_addr_t src, size_t len)
2627 {
2628         px->next = NULL;
2629         px->bytes = len;
2630         px->dst_addr = dst;
2631         px->src_addr = src;
2632 }
2633
2634 static struct dma_pl330_desc *
2635 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2636                 dma_addr_t src, size_t len)
2637 {
2638         struct dma_pl330_desc *desc = pl330_get_desc(pch);
2639
2640         if (!desc) {
2641                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2642                         __func__, __LINE__);
2643                 return NULL;
2644         }
2645
2646         /*
2647          * Ideally we should lookout for reqs bigger than
2648          * those that can be programmed with 256 bytes of
2649          * MC buffer, but considering a req size is seldom
2650          * going to be word-unaligned and more than 200MB,
2651          * we take it easy.
2652          * Also, should the limit is reached we'd rather
2653          * have the platform increase MC buffer size than
2654          * complicating this API driver.
2655          */
2656         fill_px(&desc->px, dst, src, len);
2657
2658         return desc;
2659 }
2660
2661 /* Call after fixing burst size */
2662 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2663 {
2664         struct dma_pl330_chan *pch = desc->pchan;
2665         struct pl330_info *pi = &pch->dmac->pif;
2666         int burst_len;
2667
2668         burst_len = pi->pcfg.data_bus_width / 8;
2669         burst_len *= pi->pcfg.data_buf_dep;
2670         burst_len >>= desc->rqcfg.brst_size;
2671
2672         /* src/dst_burst_len can't be more than 16 */
2673         if (burst_len > 16)
2674                 burst_len = 16;
2675
2676         while (burst_len > 1) {
2677                 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2678                         break;
2679                 burst_len--;
2680         }
2681
2682         return burst_len;
2683 }
2684
2685 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2686                 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2687                 size_t period_len, enum dma_transfer_direction direction,
2688                 unsigned long flags, void *context)
2689 {
2690         struct dma_pl330_desc *desc;
2691         struct dma_pl330_chan *pch = to_pchan(chan);
2692         dma_addr_t dst;
2693         dma_addr_t src;
2694
2695         desc = pl330_get_desc(pch);
2696         if (!desc) {
2697                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2698                         __func__, __LINE__);
2699                 return NULL;
2700         }
2701
2702         switch (direction) {
2703         case DMA_MEM_TO_DEV:
2704                 desc->rqcfg.src_inc = 1;
2705                 desc->rqcfg.dst_inc = 0;
2706                 desc->req.rqtype = MEMTODEV;
2707                 src = dma_addr;
2708                 dst = pch->fifo_addr;
2709                 break;
2710         case DMA_DEV_TO_MEM:
2711                 desc->rqcfg.src_inc = 0;
2712                 desc->rqcfg.dst_inc = 1;
2713                 desc->req.rqtype = DEVTOMEM;
2714                 src = pch->fifo_addr;
2715                 dst = dma_addr;
2716                 break;
2717         default:
2718                 dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
2719                 __func__, __LINE__);
2720                 return NULL;
2721         }
2722
2723         desc->rqcfg.brst_size = pch->burst_sz;
2724         desc->rqcfg.brst_len = 1;
2725
2726         pch->cyclic = true;
2727
2728         fill_px(&desc->px, dst, src, period_len);
2729
2730         return &desc->txd;
2731 }
2732
2733 static struct dma_async_tx_descriptor *
2734 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2735                 dma_addr_t src, size_t len, unsigned long flags)
2736 {
2737         struct dma_pl330_desc *desc;
2738         struct dma_pl330_chan *pch = to_pchan(chan);
2739         struct pl330_info *pi;
2740         int burst;
2741
2742         if (unlikely(!pch || !len))
2743                 return NULL;
2744
2745         pi = &pch->dmac->pif;
2746
2747         desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2748         if (!desc)
2749                 return NULL;
2750
2751         desc->rqcfg.src_inc = 1;
2752         desc->rqcfg.dst_inc = 1;
2753         desc->req.rqtype = MEMTOMEM;
2754
2755         /* Select max possible burst size */
2756         burst = pi->pcfg.data_bus_width / 8;
2757
2758         while (burst > 1) {
2759                 if (!(len % burst))
2760                         break;
2761                 burst /= 2;
2762         }
2763
2764         desc->rqcfg.brst_size = 0;
2765         while (burst != (1 << desc->rqcfg.brst_size))
2766                 desc->rqcfg.brst_size++;
2767
2768         desc->rqcfg.brst_len = get_burst_len(desc, len);
2769
2770         desc->txd.flags = flags;
2771
2772         return &desc->txd;
2773 }
2774
2775 static struct dma_async_tx_descriptor *
2776 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2777                 unsigned int sg_len, enum dma_transfer_direction direction,
2778                 unsigned long flg, void *context)
2779 {
2780         struct dma_pl330_desc *first, *desc = NULL;
2781         struct dma_pl330_chan *pch = to_pchan(chan);
2782         struct scatterlist *sg;
2783         unsigned long flags;
2784         int i;
2785         dma_addr_t addr;
2786
2787         if (unlikely(!pch || !sgl || !sg_len))
2788                 return NULL;
2789
2790         addr = pch->fifo_addr;
2791
2792         first = NULL;
2793
2794         for_each_sg(sgl, sg, sg_len, i) {
2795
2796                 desc = pl330_get_desc(pch);
2797                 if (!desc) {
2798                         struct dma_pl330_dmac *pdmac = pch->dmac;
2799
2800                         dev_err(pch->dmac->pif.dev,
2801                                 "%s:%d Unable to fetch desc\n",
2802                                 __func__, __LINE__);
2803                         if (!first)
2804                                 return NULL;
2805
2806                         spin_lock_irqsave(&pdmac->pool_lock, flags);
2807
2808                         while (!list_empty(&first->node)) {
2809                                 desc = list_entry(first->node.next,
2810                                                 struct dma_pl330_desc, node);
2811                                 list_move_tail(&desc->node, &pdmac->desc_pool);
2812                         }
2813
2814                         list_move_tail(&first->node, &pdmac->desc_pool);
2815
2816                         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2817
2818                         return NULL;
2819                 }
2820
2821                 if (!first)
2822                         first = desc;
2823                 else
2824                         list_add_tail(&desc->node, &first->node);
2825
2826                 if (direction == DMA_MEM_TO_DEV) {
2827                         desc->rqcfg.src_inc = 1;
2828                         desc->rqcfg.dst_inc = 0;
2829                         desc->req.rqtype = MEMTODEV;
2830                         fill_px(&desc->px,
2831                                 addr, sg_dma_address(sg), sg_dma_len(sg));
2832                 } else {
2833                         desc->rqcfg.src_inc = 0;
2834                         desc->rqcfg.dst_inc = 1;
2835                         desc->req.rqtype = DEVTOMEM;
2836                         fill_px(&desc->px,
2837                                 sg_dma_address(sg), addr, sg_dma_len(sg));
2838                 }
2839
2840                 desc->rqcfg.brst_size = pch->burst_sz;
2841                 desc->rqcfg.brst_len = 1;
2842         }
2843
2844         /* Return the last desc in the chain */
2845         desc->txd.flags = flg;
2846         return &desc->txd;
2847 }
2848
2849 static irqreturn_t pl330_irq_handler(int irq, void *data)
2850 {
2851         if (pl330_update(data))
2852                 return IRQ_HANDLED;
2853         else
2854                 return IRQ_NONE;
2855 }
2856
2857 static int __devinit
2858 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2859 {
2860         struct dma_pl330_platdata *pdat;
2861         struct dma_pl330_dmac *pdmac;
2862         struct dma_pl330_chan *pch;
2863         struct pl330_info *pi;
2864         struct dma_device *pd;
2865         struct resource *res;
2866         int i, ret, irq;
2867         int num_chan;
2868
2869         pdat = adev->dev.platform_data;
2870
2871         /* Allocate a new DMAC and its Channels */
2872         pdmac = kzalloc(sizeof(*pdmac), GFP_KERNEL);
2873         if (!pdmac) {
2874                 dev_err(&adev->dev, "unable to allocate mem\n");
2875                 return -ENOMEM;
2876         }
2877
2878         pi = &pdmac->pif;
2879         pi->dev = &adev->dev;
2880         pi->pl330_data = NULL;
2881         pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2882
2883         res = &adev->res;
2884         request_mem_region(res->start, resource_size(res), "dma-pl330");
2885
2886         pi->base = ioremap(res->start, resource_size(res));
2887         if (!pi->base) {
2888                 ret = -ENXIO;
2889                 goto probe_err1;
2890         }
2891
2892         pdmac->clk = clk_get(&adev->dev, "dma");
2893         if (IS_ERR(pdmac->clk)) {
2894                 dev_err(&adev->dev, "Cannot get operation clock.\n");
2895                 ret = -EINVAL;
2896                 goto probe_err2;
2897         }
2898
2899         amba_set_drvdata(adev, pdmac);
2900
2901 #ifndef CONFIG_PM_RUNTIME
2902         /* enable dma clk */
2903         clk_enable(pdmac->clk);
2904 #endif
2905
2906         irq = adev->irq[0];
2907         ret = request_irq(irq, pl330_irq_handler, 0,
2908                         dev_name(&adev->dev), pi);
2909         if (ret)
2910                 goto probe_err3;
2911
2912         ret = pl330_add(pi);
2913         if (ret)
2914                 goto probe_err4;
2915
2916         INIT_LIST_HEAD(&pdmac->desc_pool);
2917         spin_lock_init(&pdmac->pool_lock);
2918
2919         /* Create a descriptor pool of default size */
2920         if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
2921                 dev_warn(&adev->dev, "unable to allocate desc\n");
2922
2923         pd = &pdmac->ddma;
2924         INIT_LIST_HEAD(&pd->channels);
2925
2926         /* Initialize channel parameters */
2927         if (pdat)
2928                 num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan);
2929         else
2930                 num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan);
2931
2932         pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2933         if (!pdmac->peripherals) {
2934                 ret = -ENOMEM;
2935                 dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
2936                 goto probe_err5;
2937         }
2938
2939         for (i = 0; i < num_chan; i++) {
2940                 pch = &pdmac->peripherals[i];
2941                 if (!adev->dev.of_node)
2942                         pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2943                 else
2944                         pch->chan.private = adev->dev.of_node;
2945
2946                 INIT_LIST_HEAD(&pch->work_list);
2947                 spin_lock_init(&pch->lock);
2948                 pch->pl330_chid = NULL;
2949                 pch->chan.device = pd;
2950                 pch->dmac = pdmac;
2951
2952                 /* Add the channel to the DMAC list */
2953                 list_add_tail(&pch->chan.device_node, &pd->channels);
2954         }
2955
2956         pd->dev = &adev->dev;
2957         if (pdat) {
2958                 pd->cap_mask = pdat->cap_mask;
2959         } else {
2960                 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2961                 if (pi->pcfg.num_peri) {
2962                         dma_cap_set(DMA_SLAVE, pd->cap_mask);
2963                         dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2964                 }
2965         }
2966
2967         pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2968         pd->device_free_chan_resources = pl330_free_chan_resources;
2969         pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2970         pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2971         pd->device_tx_status = pl330_tx_status;
2972         pd->device_prep_slave_sg = pl330_prep_slave_sg;
2973         pd->device_control = pl330_control;
2974         pd->device_issue_pending = pl330_issue_pending;
2975
2976         ret = dma_async_device_register(pd);
2977         if (ret) {
2978                 dev_err(&adev->dev, "unable to register DMAC\n");
2979                 goto probe_err5;
2980         }
2981
2982         dev_info(&adev->dev,
2983                 "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
2984         dev_info(&adev->dev,
2985                 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2986                 pi->pcfg.data_buf_dep,
2987                 pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
2988                 pi->pcfg.num_peri, pi->pcfg.num_events);
2989
2990         return 0;
2991
2992 probe_err5:
2993         pl330_del(pi);
2994 probe_err4:
2995         free_irq(irq, pi);
2996 probe_err3:
2997 #ifndef CONFIG_PM_RUNTIME
2998         clk_disable(pdmac->clk);
2999 #endif
3000         clk_put(pdmac->clk);
3001 probe_err2:
3002         iounmap(pi->base);
3003 probe_err1:
3004         release_mem_region(res->start, resource_size(res));
3005         kfree(pdmac);
3006
3007         return ret;
3008 }
3009
3010 static int __devexit pl330_remove(struct amba_device *adev)
3011 {
3012         struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
3013         struct dma_pl330_chan *pch, *_p;
3014         struct pl330_info *pi;
3015         struct resource *res;
3016         int irq;
3017
3018         if (!pdmac)
3019                 return 0;
3020
3021         amba_set_drvdata(adev, NULL);
3022
3023         /* Idle the DMAC */
3024         list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
3025                         chan.device_node) {
3026
3027                 /* Remove the channel */
3028                 list_del(&pch->chan.device_node);
3029
3030                 /* Flush the channel */
3031                 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
3032                 pl330_free_chan_resources(&pch->chan);
3033         }
3034
3035         pi = &pdmac->pif;
3036
3037         pl330_del(pi);
3038
3039         irq = adev->irq[0];
3040         free_irq(irq, pi);
3041
3042         iounmap(pi->base);
3043
3044         res = &adev->res;
3045         release_mem_region(res->start, resource_size(res));
3046
3047 #ifndef CONFIG_PM_RUNTIME
3048         clk_disable(pdmac->clk);
3049 #endif
3050
3051         kfree(pdmac);
3052
3053         return 0;
3054 }
3055
3056 static struct amba_id pl330_ids[] = {
3057         {
3058                 .id     = 0x00041330,
3059                 .mask   = 0x000fffff,
3060         },
3061         { 0, 0 },
3062 };
3063
3064 MODULE_DEVICE_TABLE(amba, pl330_ids);
3065
3066 #ifdef CONFIG_PM_RUNTIME
3067 static int pl330_runtime_suspend(struct device *dev)
3068 {
3069         struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
3070
3071         if (!pdmac) {
3072                 dev_err(dev, "failed to get dmac\n");
3073                 return -ENODEV;
3074         }
3075
3076         clk_disable(pdmac->clk);
3077
3078         return 0;
3079 }
3080
3081 static int pl330_runtime_resume(struct device *dev)
3082 {
3083         struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
3084
3085         if (!pdmac) {
3086                 dev_err(dev, "failed to get dmac\n");
3087                 return -ENODEV;
3088         }
3089
3090         clk_enable(pdmac->clk);
3091
3092         return 0;
3093 }
3094 #else
3095 #define pl330_runtime_suspend   NULL
3096 #define pl330_runtime_resume    NULL
3097 #endif /* CONFIG_PM_RUNTIME */
3098
3099 static const struct dev_pm_ops pl330_pm_ops = {
3100         .runtime_suspend = pl330_runtime_suspend,
3101         .runtime_resume = pl330_runtime_resume,
3102 };
3103
3104 static struct amba_driver pl330_driver = {
3105         .drv = {
3106                 .owner = THIS_MODULE,
3107                 .name = "dma-pl330",
3108                 .pm = &pl330_pm_ops,
3109         },
3110         .id_table = pl330_ids,
3111         .probe = pl330_probe,
3112         .remove = pl330_remove,
3113 };
3114
3115 module_amba_driver(pl330_driver);
3116
3117 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
3118 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3119 MODULE_LICENSE("GPL");