arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25                 serial0 = &auart0;
  26                 serial1 = &auart1;
  27                 serial2 = &auart2;
  28                 serial3 = &auart3;
  29                 serial4 = &auart4;
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32         };
  33
  34         cpus {
  35                 cpu@0 {
  36                         compatible = "arm,arm926ejs";
  37                 };
  38         };
  39
  40         apb@80000000 {
  41                 compatible = "simple-bus";
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 reg = <0x80000000 0x80000>;
  45                 ranges;
  46
  47                 apbh@80000000 {
  48                         compatible = "simple-bus";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         reg = <0x80000000 0x3c900>;
  52                         ranges;
  53
  54                         icoll: interrupt-controller@80000000 {
  55                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  56                                 interrupt-controller;
  57                                 #interrupt-cells = <1>;
  58                                 reg = <0x80000000 0x2000>;
  59                         };
  60
  61                         hsadc@80002000 {
  62                                 reg = <0x80002000 0x2000>;
  63                                 interrupts = <13 87>;
  64                                 status = "disabled";
  65                         };
  66
  67                         dma-apbh@80004000 {
  68                                 compatible = "fsl,imx28-dma-apbh";
  69                                 reg = <0x80004000 0x2000>;
  70                                 clocks = <&clks 25>;
  71                         };
  72
  73                         perfmon@80006000 {
  74                                 reg = <0x80006000 0x800>;
  75                                 interrupts = <27>;
  76                                 status = "disabled";
  77                         };
  78
  79                         gpmi-nand@8000c000 {
  80                                 compatible = "fsl,imx28-gpmi-nand";
  81                                 #address-cells = <1>;
  82                                 #size-cells = <1>;
  83                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  84                                 reg-names = "gpmi-nand", "bch";
  85                                 interrupts = <88>, <41>;
  86                                 interrupt-names = "gpmi-dma", "bch";
  87                                 clocks = <&clks 50>;
  88                                 clock-names = "gpmi_io";
  89                                 fsl,gpmi-dma-channel = <4>;
  90                                 status = "disabled";
  91                         };
  92
  93                         ssp0: ssp@80010000 {
  94                                 #address-cells = <1>;
  95                                 #size-cells = <0>;
  96                                 reg = <0x80010000 0x2000>;
  97                                 interrupts = <96 82>;
  98                                 clocks = <&clks 46>;
  99                                 fsl,ssp-dma-channel = <0>;
 100                                 status = "disabled";
 101                         };
 102
 103                         ssp1: ssp@80012000 {
 104                                 #address-cells = <1>;
 105                                 #size-cells = <0>;
 106                                 reg = <0x80012000 0x2000>;
 107                                 interrupts = <97 83>;
 108                                 clocks = <&clks 47>;
 109                                 fsl,ssp-dma-channel = <1>;
 110                                 status = "disabled";
 111                         };
 112
 113                         ssp2: ssp@80014000 {
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 reg = <0x80014000 0x2000>;
 117                                 interrupts = <98 84>;
 118                                 clocks = <&clks 48>;
 119                                 fsl,ssp-dma-channel = <2>;
 120                                 status = "disabled";
 121                         };
 122
 123                         ssp3: ssp@80016000 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                                 reg = <0x80016000 0x2000>;
 127                                 interrupts = <99 85>;
 128                                 clocks = <&clks 49>;
 129                                 fsl,ssp-dma-channel = <3>;
 130                                 status = "disabled";
 131                         };
 132
 133                         pinctrl@80018000 {
 134                                 #address-cells = <1>;
 135                                 #size-cells = <0>;
 136                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 137                                 reg = <0x80018000 0x2000>;
 138
 139                                 gpio0: gpio@0 {
 140                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 141                                         interrupts = <127>;
 142                                         gpio-controller;
 143                                         #gpio-cells = <2>;
 144                                         interrupt-controller;
 145                                         #interrupt-cells = <2>;
 146                                 };
 147
 148                                 gpio1: gpio@1 {
 149                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 150                                         interrupts = <126>;
 151                                         gpio-controller;
 152                                         #gpio-cells = <2>;
 153                                         interrupt-controller;
 154                                         #interrupt-cells = <2>;
 155                                 };
 156
 157                                 gpio2: gpio@2 {
 158                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 159                                         interrupts = <125>;
 160                                         gpio-controller;
 161                                         #gpio-cells = <2>;
 162                                         interrupt-controller;
 163                                         #interrupt-cells = <2>;
 164                                 };
 165
 166                                 gpio3: gpio@3 {
 167                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 168                                         interrupts = <124>;
 169                                         gpio-controller;
 170                                         #gpio-cells = <2>;
 171                                         interrupt-controller;
 172                                         #interrupt-cells = <2>;
 173                                 };
 174
 175                                 gpio4: gpio@4 {
 176                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 177                                         interrupts = <123>;
 178                                         gpio-controller;
 179                                         #gpio-cells = <2>;
 180                                         interrupt-controller;
 181                                         #interrupt-cells = <2>;
 182                                 };
 183
 184                                 duart_pins_a: duart@0 {
 185                                         reg = <0>;
 186                                         fsl,pinmux-ids = <
 187                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 188                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 189                                         >;
 190                                         fsl,drive-strength = <0>;
 191                                         fsl,voltage = <1>;
 192                                         fsl,pull-up = <0>;
 193                                 };
 194
 195                                 duart_pins_b: duart@1 {
 196                                         reg = <1>;
 197                                         fsl,pinmux-ids = <
 198                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 199                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 200                                         >;
 201                                         fsl,drive-strength = <0>;
 202                                         fsl,voltage = <1>;
 203                                         fsl,pull-up = <0>;
 204                                 };
 205
 206                                 duart_4pins_a: duart-4pins@0 {
 207                                         reg = <0>;
 208                                         fsl,pinmux-ids = <
 209                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 210                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 211                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 212                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 213                                         >;
 214                                         fsl,drive-strength = <0>;
 215                                         fsl,voltage = <1>;
 216                                         fsl,pull-up = <0>;
 217                                 };
 218
 219                                 gpmi_pins_a: gpmi-nand@0 {
 220                                         reg = <0>;
 221                                         fsl,pinmux-ids = <
 222                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 223                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 224                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 225                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 226                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 227                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 228                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 229                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 230                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 231                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 232                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 233                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 234                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 235                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 236                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 237                                         >;
 238                                         fsl,drive-strength = <0>;
 239                                         fsl,voltage = <1>;
 240                                         fsl,pull-up = <0>;
 241                                 };
 242
 243                                 gpmi_status_cfg: gpmi-status-cfg {
 244                                         fsl,pinmux-ids = <
 245                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 246                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 247                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 248                                         >;
 249                                         fsl,drive-strength = <2>;
 250                                 };
 251
 252                                 auart0_pins_a: auart0@0 {
 253                                         reg = <0>;
 254                                         fsl,pinmux-ids = <
 255                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 256                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 257                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 258                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 259                                         >;
 260                                         fsl,drive-strength = <0>;
 261                                         fsl,voltage = <1>;
 262                                         fsl,pull-up = <0>;
 263                                 };
 264
 265                                 auart0_2pins_a: auart0-2pins@0 {
 266                                         reg = <0>;
 267                                         fsl,pinmux-ids = <
 268                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 269                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 270                                         >;
 271                                         fsl,drive-strength = <0>;
 272                                         fsl,voltage = <1>;
 273                                         fsl,pull-up = <0>;
 274                                 };
 275
 276                                 auart1_pins_a: auart1@0 {
 277                                         reg = <0>;
 278                                         fsl,pinmux-ids = <
 279                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 280                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 281                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 282                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 283                                         >;
 284                                         fsl,drive-strength = <0>;
 285                                         fsl,voltage = <1>;
 286                                         fsl,pull-up = <0>;
 287                                 };
 288
 289                                 auart1_2pins_a: auart1-2pins@0 {
 290                                         reg = <0>;
 291                                         fsl,pinmux-ids = <
 292                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 293                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 294                                         >;
 295                                         fsl,drive-strength = <0>;
 296                                         fsl,voltage = <1>;
 297                                         fsl,pull-up = <0>;
 298                                 };
 299
 300                                 auart2_2pins_a: auart2-2pins@0 {
 301                                         reg = <0>;
 302                                         fsl,pinmux-ids = <
 303                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 304                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 305                                         >;
 306                                         fsl,drive-strength = <0>;
 307                                         fsl,voltage = <1>;
 308                                         fsl,pull-up = <0>;
 309                                 };
 310
 311                                 auart3_pins_a: auart3@0 {
 312                                         reg = <0>;
 313                                         fsl,pinmux-ids = <
 314                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 315                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 316                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 317                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 318                                         >;
 319                                         fsl,drive-strength = <0>;
 320                                         fsl,voltage = <1>;
 321                                         fsl,pull-up = <0>;
 322                                 };
 323
 324                                 auart3_2pins_a: auart3-2pins@0 {
 325                                         reg = <0>;
 326                                         fsl,pinmux-ids = <
 327                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 328                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 329                                         >;
 330                                         fsl,drive-strength = <0>;
 331                                         fsl,voltage = <1>;
 332                                         fsl,pull-up = <0>;
 333                                 };
 334
 335                                 mac0_pins_a: mac0@0 {
 336                                         reg = <0>;
 337                                         fsl,pinmux-ids = <
 338                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 339                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 340                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 341                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 342                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 343                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 344                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 345                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 346                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 347                                         >;
 348                                         fsl,drive-strength = <1>;
 349                                         fsl,voltage = <1>;
 350                                         fsl,pull-up = <1>;
 351                                 };
 352
 353                                 mac1_pins_a: mac1@0 {
 354                                         reg = <0>;
 355                                         fsl,pinmux-ids = <
 356                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 357                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 358                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 359                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 360                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 361                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 362                                         >;
 363                                         fsl,drive-strength = <1>;
 364                                         fsl,voltage = <1>;
 365                                         fsl,pull-up = <1>;
 366                                 };
 367
 368                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 369                                         reg = <0>;
 370                                         fsl,pinmux-ids = <
 371                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 372                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 373                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 374                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 375                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 376                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 377                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 378                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 379                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 380                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 381                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 382                                         >;
 383                                         fsl,drive-strength = <1>;
 384                                         fsl,voltage = <1>;
 385                                         fsl,pull-up = <1>;
 386                                 };
 387
 388                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 389                                         reg = <0>;
 390                                         fsl,pinmux-ids = <
 391                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 392                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 393                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 394                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 395                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 396                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 397                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 398                                         >;
 399                                         fsl,drive-strength = <1>;
 400                                         fsl,voltage = <1>;
 401                                         fsl,pull-up = <1>;
 402                                 };
 403
 404                                 mmc0_cd_cfg: mmc0-cd-cfg {
 405                                         fsl,pinmux-ids = <
 406                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 407                                         >;
 408                                         fsl,pull-up = <0>;
 409                                 };
 410
 411                                 mmc0_sck_cfg: mmc0-sck-cfg {
 412                                         fsl,pinmux-ids = <
 413                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 414                                         >;
 415                                         fsl,drive-strength = <2>;
 416                                         fsl,pull-up = <0>;
 417                                 };
 418
 419                                 i2c0_pins_a: i2c0@0 {
 420                                         reg = <0>;
 421                                         fsl,pinmux-ids = <
 422                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 423                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 424                                         >;
 425                                         fsl,drive-strength = <1>;
 426                                         fsl,voltage = <1>;
 427                                         fsl,pull-up = <1>;
 428                                 };
 429
 430                                 i2c0_pins_b: i2c0@1 {
 431                                         reg = <1>;
 432                                         fsl,pinmux-ids = <
 433                                                 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
 434                                                 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
 435                                         >;
 436                                         fsl,drive-strength = <1>;
 437                                         fsl,voltage = <1>;
 438                                         fsl,pull-up = <1>;
 439                                 };
 440
 441                                 i2c1_pins_a: i2c1@0 {
 442                                         reg = <0>;
 443                                         fsl,pinmux-ids = <
 444                                                 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
 445                                                 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
 446                                         >;
 447                                         fsl,drive-strength = <1>;
 448                                         fsl,voltage = <1>;
 449                                         fsl,pull-up = <1>;
 450                                 };
 451
 452                                 saif0_pins_a: saif0@0 {
 453                                         reg = <0>;
 454                                         fsl,pinmux-ids = <
 455                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 456                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 457                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 458                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 459                                         >;
 460                                         fsl,drive-strength = <2>;
 461                                         fsl,voltage = <1>;
 462                                         fsl,pull-up = <1>;
 463                                 };
 464
 465                                 saif1_pins_a: saif1@0 {
 466                                         reg = <0>;
 467                                         fsl,pinmux-ids = <
 468                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 469                                         >;
 470                                         fsl,drive-strength = <2>;
 471                                         fsl,voltage = <1>;
 472                                         fsl,pull-up = <1>;
 473                                 };
 474
 475                                 pwm0_pins_a: pwm0@0 {
 476                                         reg = <0>;
 477                                         fsl,pinmux-ids = <
 478                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 479                                         >;
 480                                         fsl,drive-strength = <0>;
 481                                         fsl,voltage = <1>;
 482                                         fsl,pull-up = <0>;
 483                                 };
 484
 485                                 pwm2_pins_a: pwm2@0 {
 486                                         reg = <0>;
 487                                         fsl,pinmux-ids = <
 488                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 489                                         >;
 490                                         fsl,drive-strength = <0>;
 491                                         fsl,voltage = <1>;
 492                                         fsl,pull-up = <0>;
 493                                 };
 494
 495                                 pwm3_pins_a: pwm3@0 {
 496                                         reg = <0>;
 497                                         fsl,pinmux-ids = <
 498                                                 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
 499                                         >;
 500                                         fsl,drive-strength = <0>;
 501                                         fsl,voltage = <1>;
 502                                         fsl,pull-up = <0>;
 503                                 };
 504
 505                                 pwm4_pins_a: pwm4@0 {
 506                                         reg = <0>;
 507                                         fsl,pinmux-ids = <
 508                                                 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
 509                                         >;
 510                                         fsl,drive-strength = <0>;
 511                                         fsl,voltage = <1>;
 512                                         fsl,pull-up = <0>;
 513                                 };
 514
 515                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 516                                         reg = <0>;
 517                                         fsl,pinmux-ids = <
 518                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 519                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 520                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 521                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 522                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 523                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 524                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 525                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 526                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 527                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 528                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 529                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 530                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 531                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 532                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 533                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 534                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 535                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 536                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 537                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 538                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 539                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 540                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 541                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 542                                         >;
 543                                         fsl,drive-strength = <0>;
 544                                         fsl,voltage = <1>;
 545                                         fsl,pull-up = <0>;
 546                                 };
 547
 548                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 549                                         reg = <0>;
 550                                         fsl,pinmux-ids = <
 551                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 552                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 553                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 554                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 555                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 556                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 557                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 558                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 559                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 560                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 561                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 562                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 563                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 564                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 565                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 566                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 567                                         >;
 568                                         fsl,drive-strength = <0>;
 569                                         fsl,voltage = <1>;
 570                                         fsl,pull-up = <0>;
 571                                 };
 572
 573                                 can0_pins_a: can0@0 {
 574                                         reg = <0>;
 575                                         fsl,pinmux-ids = <
 576                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 577                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 578                                         >;
 579                                         fsl,drive-strength = <0>;
 580                                         fsl,voltage = <1>;
 581                                         fsl,pull-up = <0>;
 582                                 };
 583
 584                                 can1_pins_a: can1@0 {
 585                                         reg = <0>;
 586                                         fsl,pinmux-ids = <
 587                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 588                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 589                                         >;
 590                                         fsl,drive-strength = <0>;
 591                                         fsl,voltage = <1>;
 592                                         fsl,pull-up = <0>;
 593                                 };
 594
 595                                 spi2_pins_a: spi2@0 {
 596                                         reg = <0>;
 597                                         fsl,pinmux-ids = <
 598                                                 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
 599                                                 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
 600                                                 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
 601                                                 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
 602                                         >;
 603                                         fsl,drive-strength = <1>;
 604                                         fsl,voltage = <1>;
 605                                         fsl,pull-up = <1>;
 606                                 };
 607
 608                                 usbphy0_pins_a: usbphy0@0 {
 609                                         reg = <0>;
 610                                         fsl,pinmux-ids = <
 611                                                 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
 612                                         >;
 613                                         fsl,drive-strength = <2>;
 614                                         fsl,voltage = <1>;
 615                                         fsl,pull-up = <0>;
 616                                 };
 617
 618                                 usbphy0_pins_b: usbphy0@1 {
 619                                         reg = <1>;
 620                                         fsl,pinmux-ids = <
 621                                                 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
 622                                         >;
 623                                         fsl,drive-strength = <2>;
 624                                         fsl,voltage = <1>;
 625                                         fsl,pull-up = <0>;
 626                                 };
 627
 628                                 usbphy1_pins_a: usbphy1@0 {
 629                                         reg = <0>;
 630                                         fsl,pinmux-ids = <
 631                                                 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
 632                                         >;
 633                                         fsl,drive-strength = <2>;
 634                                         fsl,voltage = <1>;
 635                                         fsl,pull-up = <0>;
 636                                 };
 637                         };
 638
 639                         digctl@8001c000 {
 640                                 reg = <0x8001c000 0x2000>;
 641                                 interrupts = <89>;
 642                                 status = "disabled";
 643                         };
 644
 645                         etm@80022000 {
 646                                 reg = <0x80022000 0x2000>;
 647                                 status = "disabled";
 648                         };
 649
 650                         dma-apbx@80024000 {
 651                                 compatible = "fsl,imx28-dma-apbx";
 652                                 reg = <0x80024000 0x2000>;
 653                                 clocks = <&clks 26>;
 654                         };
 655
 656                         dcp@80028000 {
 657                                 reg = <0x80028000 0x2000>;
 658                                 interrupts = <52 53 54>;
 659                                 status = "disabled";
 660                         };
 661
 662                         pxp@8002a000 {
 663                                 reg = <0x8002a000 0x2000>;
 664                                 interrupts = <39>;
 665                                 status = "disabled";
 666                         };
 667
 668                         ocotp@8002c000 {
 669                                 reg = <0x8002c000 0x2000>;
 670                                 status = "disabled";
 671                         };
 672
 673                         axi-ahb@8002e000 {
 674                                 reg = <0x8002e000 0x2000>;
 675                                 status = "disabled";
 676                         };
 677
 678                         lcdif@80030000 {
 679                                 compatible = "fsl,imx28-lcdif";
 680                                 reg = <0x80030000 0x2000>;
 681                                 interrupts = <38 86>;
 682                                 clocks = <&clks 55>;
 683                                 status = "disabled";
 684                         };
 685
 686                         can0: can@80032000 {
 687                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 688                                 reg = <0x80032000 0x2000>;
 689                                 interrupts = <8>;
 690                                 clocks = <&clks 58>, <&clks 58>;
 691                                 clock-names = "ipg", "per";
 692                                 status = "disabled";
 693                         };
 694
 695                         can1: can@80034000 {
 696                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 697                                 reg = <0x80034000 0x2000>;
 698                                 interrupts = <9>;
 699                                 clocks = <&clks 59>, <&clks 59>;
 700                                 clock-names = "ipg", "per";
 701                                 status = "disabled";
 702                         };
 703
 704                         simdbg@8003c000 {
 705                                 reg = <0x8003c000 0x200>;
 706                                 status = "disabled";
 707                         };
 708
 709                         simgpmisel@8003c200 {
 710                                 reg = <0x8003c200 0x100>;
 711                                 status = "disabled";
 712                         };
 713
 714                         simsspsel@8003c300 {
 715                                 reg = <0x8003c300 0x100>;
 716                                 status = "disabled";
 717                         };
 718
 719                         simmemsel@8003c400 {
 720                                 reg = <0x8003c400 0x100>;
 721                                 status = "disabled";
 722                         };
 723
 724                         gpiomon@8003c500 {
 725                                 reg = <0x8003c500 0x100>;
 726                                 status = "disabled";
 727                         };
 728
 729                         simenet@8003c700 {
 730                                 reg = <0x8003c700 0x100>;
 731                                 status = "disabled";
 732                         };
 733
 734                         armjtag@8003c800 {
 735                                 reg = <0x8003c800 0x100>;
 736                                 status = "disabled";
 737                         };
 738                 };
 739
 740                 apbx@80040000 {
 741                         compatible = "simple-bus";
 742                         #address-cells = <1>;
 743                         #size-cells = <1>;
 744                         reg = <0x80040000 0x40000>;
 745                         ranges;
 746
 747                         clks: clkctrl@80040000 {
 748                                 compatible = "fsl,imx28-clkctrl";
 749                                 reg = <0x80040000 0x2000>;
 750                                 #clock-cells = <1>;
 751                         };
 752
 753                         saif0: saif@80042000 {
 754                                 compatible = "fsl,imx28-saif";
 755                                 reg = <0x80042000 0x2000>;
 756                                 interrupts = <59 80>;
 757                                 clocks = <&clks 53>;
 758                                 fsl,saif-dma-channel = <4>;
 759                                 status = "disabled";
 760                         };
 761
 762                         power@80044000 {
 763                                 reg = <0x80044000 0x2000>;
 764                                 status = "disabled";
 765                         };
 766
 767                         saif1: saif@80046000 {
 768                                 compatible = "fsl,imx28-saif";
 769                                 reg = <0x80046000 0x2000>;
 770                                 interrupts = <58 81>;
 771                                 clocks = <&clks 54>;
 772                                 fsl,saif-dma-channel = <5>;
 773                                 status = "disabled";
 774                         };
 775
 776                         lradc@80050000 {
 777                                 compatible = "fsl,imx28-lradc";
 778                                 reg = <0x80050000 0x2000>;
 779                                 interrupts = <10 14 15 16 17 18 19
 780                                                 20 21 22 23 24 25>;
 781                                 status = "disabled";
 782                         };
 783
 784                         spdif@80054000 {
 785                                 reg = <0x80054000 0x2000>;
 786                                 interrupts = <45 66>;
 787                                 status = "disabled";
 788                         };
 789
 790                         rtc@80056000 {
 791                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 792                                 reg = <0x80056000 0x2000>;
 793                                 interrupts = <29>;
 794                         };
 795
 796                         i2c0: i2c@80058000 {
 797                                 #address-cells = <1>;
 798                                 #size-cells = <0>;
 799                                 compatible = "fsl,imx28-i2c";
 800                                 reg = <0x80058000 0x2000>;
 801                                 interrupts = <111 68>;
 802                                 clock-frequency = <100000>;
 803                                 fsl,i2c-dma-channel = <6>;
 804                                 status = "disabled";
 805                         };
 806
 807                         i2c1: i2c@8005a000 {
 808                                 #address-cells = <1>;
 809                                 #size-cells = <0>;
 810                                 compatible = "fsl,imx28-i2c";
 811                                 reg = <0x8005a000 0x2000>;
 812                                 interrupts = <110 69>;
 813                                 clock-frequency = <100000>;
 814                                 fsl,i2c-dma-channel = <7>;
 815                                 status = "disabled";
 816                         };
 817
 818                         pwm: pwm@80064000 {
 819                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 820                                 reg = <0x80064000 0x2000>;
 821                                 clocks = <&clks 44>;
 822                                 #pwm-cells = <2>;
 823                                 fsl,pwm-number = <8>;
 824                                 status = "disabled";
 825                         };
 826
 827                         timrot@80068000 {
 828                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 829                                 reg = <0x80068000 0x2000>;
 830                                 interrupts = <48 49 50 51>;
 831                         };
 832
 833                         auart0: serial@8006a000 {
 834                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 835                                 reg = <0x8006a000 0x2000>;
 836                                 interrupts = <112 70 71>;
 837                                 fsl,auart-dma-channel = <8 9>;
 838                                 clocks = <&clks 45>;
 839                                 status = "disabled";
 840                         };
 841
 842                         auart1: serial@8006c000 {
 843                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 844                                 reg = <0x8006c000 0x2000>;
 845                                 interrupts = <113 72 73>;
 846                                 clocks = <&clks 45>;
 847                                 status = "disabled";
 848                         };
 849
 850                         auart2: serial@8006e000 {
 851                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 852                                 reg = <0x8006e000 0x2000>;
 853                                 interrupts = <114 74 75>;
 854                                 clocks = <&clks 45>;
 855                                 status = "disabled";
 856                         };
 857
 858                         auart3: serial@80070000 {
 859                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 860                                 reg = <0x80070000 0x2000>;
 861                                 interrupts = <115 76 77>;
 862                                 clocks = <&clks 45>;
 863                                 status = "disabled";
 864                         };
 865
 866                         auart4: serial@80072000 {
 867                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 868                                 reg = <0x80072000 0x2000>;
 869                                 interrupts = <116 78 79>;
 870                                 clocks = <&clks 45>;
 871                                 status = "disabled";
 872                         };
 873
 874                         duart: serial@80074000 {
 875                                 compatible = "arm,pl011", "arm,primecell";
 876                                 reg = <0x80074000 0x1000>;
 877                                 interrupts = <47>;
 878                                 clocks = <&clks 45>, <&clks 26>;
 879                                 clock-names = "uart", "apb_pclk";
 880                                 status = "disabled";
 881                         };
 882
 883                         usbphy0: usbphy@8007c000 {
 884                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 885                                 reg = <0x8007c000 0x2000>;
 886                                 clocks = <&clks 62>;
 887                                 status = "disabled";
 888                         };
 889
 890                         usbphy1: usbphy@8007e000 {
 891                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 892                                 reg = <0x8007e000 0x2000>;
 893                                 clocks = <&clks 63>;
 894                                 status = "disabled";
 895                         };
 896                 };
 897         };
 898
 899         ahb@80080000 {
 900                 compatible = "simple-bus";
 901                 #address-cells = <1>;
 902                 #size-cells = <1>;
 903                 reg = <0x80080000 0x80000>;
 904                 ranges;
 905
 906                 usb0: usb@80080000 {
 907                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 908                         reg = <0x80080000 0x10000>;
 909                         interrupts = <93>;
 910                         clocks = <&clks 60>;
 911                         fsl,usbphy = <&usbphy0>;
 912                         status = "disabled";
 913                 };
 914
 915                 usb1: usb@80090000 {
 916                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 917                         reg = <0x80090000 0x10000>;
 918                         interrupts = <92>;
 919                         clocks = <&clks 61>;
 920                         fsl,usbphy = <&usbphy1>;
 921                         status = "disabled";
 922                 };
 923
 924                 dflpt@800c0000 {
 925                         reg = <0x800c0000 0x10000>;
 926                         status = "disabled";
 927                 };
 928
 929                 mac0: ethernet@800f0000 {
 930                         compatible = "fsl,imx28-fec";
 931                         reg = <0x800f0000 0x4000>;
 932                         interrupts = <101>;
 933                         clocks = <&clks 57>, <&clks 57>;
 934                         clock-names = "ipg", "ahb";
 935                         status = "disabled";
 936                 };
 937
 938                 mac1: ethernet@800f4000 {
 939                         compatible = "fsl,imx28-fec";
 940                         reg = <0x800f4000 0x4000>;
 941                         interrupts = <102>;
 942                         clocks = <&clks 57>, <&clks 57>;
 943                         clock-names = "ipg", "ahb";
 944                         status = "disabled";
 945                 };
 946
 947                 switch@800f8000 {
 948                         reg = <0x800f8000 0x8000>;
 949                         status = "disabled";
 950                 };
 951
 952         };
 953 };