arch/arm/boot/dts/am33xx.dtsi

   1 /*
   2  * Device Tree Source for AM33XX SoC
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 /include/ "skeleton.dtsi"
  12
  13 / {
  14         compatible = "ti,am33xx";
  15         interrupt-parent = <&intc>;
  16
  17         aliases {
  18                 serial0 = &uart1;
  19                 serial1 = &uart2;
  20                 serial2 = &uart3;
  21                 serial3 = &uart4;
  22                 serial4 = &uart5;
  23                 serial5 = &uart6;
  24         };
  25
  26         cpus {
  27                 cpu@0 {
  28                         compatible = "arm,cortex-a8";
  29
  30                         /*
  31                          * To consider voltage drop between PMIC and SoC,
  32                          * tolerance value is reduced to 2% from 4% and
  33                          * voltage value is increased as a precaution.
  34                          */
  35                         operating-points = <
  36                                 /* kHz    uV */
  37                                 720000  1285000
  38                                 600000  1225000
  39                                 500000  1125000
  40                                 275000  1125000
  41                         >;
  42                         voltage-tolerance = <2>; /* 2 percentage */
  43                         clock-latency = <300000>; /* From omap-cpufreq driver */
  44                 };
  45         };
  46
  47         /*
  48          * The soc node represents the soc top level view. It is uses for IPs
  49          * that are not memory mapped in the MPU view or for the MPU itself.
  50          */
  51         soc {
  52                 compatible = "ti,omap-infra";
  53                 mpu {
  54                         compatible = "ti,omap3-mpu";
  55                         ti,hwmods = "mpu";
  56                 };
  57         };
  58
  59         am33xx_pinmux: pinmux@44e10800 {
  60                 compatible = "pinctrl-single";
  61                 reg = <0x44e10800 0x0238>;
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 pinctrl-single,register-width = <32>;
  65                 pinctrl-single,function-mask = <0x7f>;
  66         };
  67
  68         /*
  69          * XXX: Use a flat representation of the AM33XX interconnect.
  70          * The real AM33XX interconnect network is quite complex.Since
  71          * that will not bring real advantage to represent that in DT
  72          * for the moment, just use a fake OCP bus entry to represent
  73          * the whole bus hierarchy.
  74          */
  75         ocp {
  76                 compatible = "simple-bus";
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79                 ranges;
  80                 ti,hwmods = "l3_main";
  81
  82                 intc: interrupt-controller@48200000 {
  83                         compatible = "ti,omap2-intc";
  84                         interrupt-controller;
  85                         #interrupt-cells = <1>;
  86                         ti,intc-size = <128>;
  87                         reg = <0x48200000 0x1000>;
  88                 };
  89
  90                 gpio1: gpio@44e07000 {
  91                         compatible = "ti,omap4-gpio";
  92                         ti,hwmods = "gpio1";
  93                         gpio-controller;
  94                         #gpio-cells = <2>;
  95                         interrupt-controller;
  96                         #interrupt-cells = <1>;
  97                         reg = <0x44e07000 0x1000>;
  98                         interrupts = <96>;
  99                 };
 100
 101                 gpio2: gpio@4804c000 {
 102                         compatible = "ti,omap4-gpio";
 103                         ti,hwmods = "gpio2";
 104                         gpio-controller;
 105                         #gpio-cells = <2>;
 106                         interrupt-controller;
 107                         #interrupt-cells = <1>;
 108                         reg = <0x4804c000 0x1000>;
 109                         interrupts = <98>;
 110                 };
 111
 112                 gpio3: gpio@481ac000 {
 113                         compatible = "ti,omap4-gpio";
 114                         ti,hwmods = "gpio3";
 115                         gpio-controller;
 116                         #gpio-cells = <2>;
 117                         interrupt-controller;
 118                         #interrupt-cells = <1>;
 119                         reg = <0x481ac000 0x1000>;
 120                         interrupts = <32>;
 121                 };
 122
 123                 gpio4: gpio@481ae000 {
 124                         compatible = "ti,omap4-gpio";
 125                         ti,hwmods = "gpio4";
 126                         gpio-controller;
 127                         #gpio-cells = <2>;
 128                         interrupt-controller;
 129                         #interrupt-cells = <1>;
 130                         reg = <0x481ae000 0x1000>;
 131                         interrupts = <62>;
 132                 };
 133
 134                 uart1: serial@44e09000 {
 135                         compatible = "ti,omap3-uart";
 136                         ti,hwmods = "uart1";
 137                         clock-frequency = <48000000>;
 138                         reg = <0x44e09000 0x2000>;
 139                         interrupts = <72>;
 140                         status = "disabled";
 141                 };
 142
 143                 uart2: serial@48022000 {
 144                         compatible = "ti,omap3-uart";
 145                         ti,hwmods = "uart2";
 146                         clock-frequency = <48000000>;
 147                         reg = <0x48022000 0x2000>;
 148                         interrupts = <73>;
 149                         status = "disabled";
 150                 };
 151
 152                 uart3: serial@48024000 {
 153                         compatible = "ti,omap3-uart";
 154                         ti,hwmods = "uart3";
 155                         clock-frequency = <48000000>;
 156                         reg = <0x48024000 0x2000>;
 157                         interrupts = <74>;
 158                         status = "disabled";
 159                 };
 160
 161                 uart4: serial@481a6000 {
 162                         compatible = "ti,omap3-uart";
 163                         ti,hwmods = "uart4";
 164                         clock-frequency = <48000000>;
 165                         reg = <0x481a6000 0x2000>;
 166                         interrupts = <44>;
 167                         status = "disabled";
 168                 };
 169
 170                 uart5: serial@481a8000 {
 171                         compatible = "ti,omap3-uart";
 172                         ti,hwmods = "uart5";
 173                         clock-frequency = <48000000>;
 174                         reg = <0x481a8000 0x2000>;
 175                         interrupts = <45>;
 176                         status = "disabled";
 177                 };
 178
 179                 uart6: serial@481aa000 {
 180                         compatible = "ti,omap3-uart";
 181                         ti,hwmods = "uart6";
 182                         clock-frequency = <48000000>;
 183                         reg = <0x481aa000 0x2000>;
 184                         interrupts = <46>;
 185                         status = "disabled";
 186                 };
 187
 188                 i2c1: i2c@44e0b000 {
 189                         compatible = "ti,omap4-i2c";
 190                         #address-cells = <1>;
 191                         #size-cells = <0>;
 192                         ti,hwmods = "i2c1";
 193                         reg = <0x44e0b000 0x1000>;
 194                         interrupts = <70>;
 195                         status = "disabled";
 196                 };
 197
 198                 i2c2: i2c@4802a000 {
 199                         compatible = "ti,omap4-i2c";
 200                         #address-cells = <1>;
 201                         #size-cells = <0>;
 202                         ti,hwmods = "i2c2";
 203                         reg = <0x4802a000 0x1000>;
 204                         interrupts = <71>;
 205                         status = "disabled";
 206                 };
 207
 208                 i2c3: i2c@4819c000 {
 209                         compatible = "ti,omap4-i2c";
 210                         #address-cells = <1>;
 211                         #size-cells = <0>;
 212                         ti,hwmods = "i2c3";
 213                         reg = <0x4819c000 0x1000>;
 214                         interrupts = <30>;
 215                         status = "disabled";
 216                 };
 217
 218                 wdt2: wdt@44e35000 {
 219                         compatible = "ti,omap3-wdt";
 220                         ti,hwmods = "wd_timer2";
 221                         reg = <0x44e35000 0x1000>;
 222                         interrupts = <91>;
 223                 };
 224
 225                 dcan0: d_can@481cc000 {
 226                         compatible = "bosch,d_can";
 227                         ti,hwmods = "d_can0";
 228                         reg = <0x481cc000 0x2000>;
 229                         interrupts = <52>;
 230                         status = "disabled";
 231                 };
 232
 233                 dcan1: d_can@481d0000 {
 234                         compatible = "bosch,d_can";
 235                         ti,hwmods = "d_can1";
 236                         reg = <0x481d0000 0x2000>;
 237                         interrupts = <55>;
 238                         status = "disabled";
 239                 };
 240
 241                 timer1: timer@44e31000 {
 242                         compatible = "ti,omap2-timer";
 243                         reg = <0x44e31000 0x400>;
 244                         interrupts = <67>;
 245                         ti,hwmods = "timer1";
 246                         ti,timer-alwon;
 247                 };
 248
 249                 timer2: timer@48040000 {
 250                         compatible = "ti,omap2-timer";
 251                         reg = <0x48040000 0x400>;
 252                         interrupts = <68>;
 253                         ti,hwmods = "timer2";
 254                 };
 255
 256                 timer3: timer@48042000 {
 257                         compatible = "ti,omap2-timer";
 258                         reg = <0x48042000 0x400>;
 259                         interrupts = <69>;
 260                         ti,hwmods = "timer3";
 261                 };
 262
 263                 timer4: timer@48044000 {
 264                         compatible = "ti,omap2-timer";
 265                         reg = <0x48044000 0x400>;
 266                         interrupts = <92>;
 267                         ti,hwmods = "timer4";
 268                         ti,timer-pwm;
 269                 };
 270
 271                 timer5: timer@48046000 {
 272                         compatible = "ti,omap2-timer";
 273                         reg = <0x48046000 0x400>;
 274                         interrupts = <93>;
 275                         ti,hwmods = "timer5";
 276                         ti,timer-pwm;
 277                 };
 278
 279                 timer6: timer@48048000 {
 280                         compatible = "ti,omap2-timer";
 281                         reg = <0x48048000 0x400>;
 282                         interrupts = <94>;
 283                         ti,hwmods = "timer6";
 284                         ti,timer-pwm;
 285                 };
 286
 287                 timer7: timer@4804a000 {
 288                         compatible = "ti,omap2-timer";
 289                         reg = <0x4804a000 0x400>;
 290                         interrupts = <95>;
 291                         ti,hwmods = "timer7";
 292                         ti,timer-pwm;
 293                 };
 294
 295                 rtc@44e3e000 {
 296                         compatible = "ti,da830-rtc";
 297                         reg = <0x44e3e000 0x1000>;
 298                         interrupts = <75
 299                                       76>;
 300                         ti,hwmods = "rtc";
 301                 };
 302
 303                 spi0: spi@48030000 {
 304                         compatible = "ti,omap4-mcspi";
 305                         #address-cells = <1>;
 306                         #size-cells = <0>;
 307                         reg = <0x48030000 0x400>;
 308                         interrupt = <65>;
 309                         ti,spi-num-cs = <2>;
 310                         ti,hwmods = "spi0";
 311                         status = "disabled";
 312                 };
 313
 314                 spi1: spi@481a0000 {
 315                         compatible = "ti,omap4-mcspi";
 316                         #address-cells = <1>;
 317                         #size-cells = <0>;
 318                         reg = <0x481a0000 0x400>;
 319                         interrupt = <125>;
 320                         ti,spi-num-cs = <2>;
 321                         ti,hwmods = "spi1";
 322                         status = "disabled";
 323                 };
 324
 325                 usb@47400000 {
 326                         compatible = "ti,musb-am33xx";
 327                         reg = <0x47400000 0x1000        /* usbss */
 328                                0x47401000 0x800         /* musb instance 0 */
 329                                0x47401800 0x800>;       /* musb instance 1 */
 330                         interrupts = <17                /* usbss */
 331                                       18                /* musb instance 0 */
 332                                       19>;              /* musb instance 1 */
 333                         multipoint = <1>;
 334                         num-eps = <16>;
 335                         ram-bits = <12>;
 336                         port0-mode = <3>;
 337                         port1-mode = <3>;
 338                         power = <250>;
 339                         ti,hwmods = "usb_otg_hs";
 340                 };
 341
 342                 mac: ethernet@4a100000 {
 343                         compatible = "ti,cpsw";
 344                         ti,hwmods = "cpgmac0";
 345                         cpdma_channels = <8>;
 346                         ale_entries = <1024>;
 347                         bd_ram_size = <0x2000>;
 348                         no_bd_ram = <0>;
 349                         rx_descs = <64>;
 350                         mac_control = <0x20>;
 351                         slaves = <2>;
 352                         cpts_active_slave = <0>;
 353                         cpts_clock_mult = <0x80000000>;
 354                         cpts_clock_shift = <29>;
 355                         reg = <0x4a100000 0x800
 356                                0x4a101200 0x100>;
 357                         #address-cells = <1>;
 358                         #size-cells = <1>;
 359                         interrupt-parent = <&intc>;
 360                         /*
 361                          * c0_rx_thresh_pend
 362                          * c0_rx_pend
 363                          * c0_tx_pend
 364                          * c0_misc_pend
 365                          */
 366                         interrupts = <40 41 42 43>;
 367                         ranges;
 368
 369                         davinci_mdio: mdio@4a101000 {
 370                                 compatible = "ti,davinci_mdio";
 371                                 #address-cells = <1>;
 372                                 #size-cells = <0>;
 373                                 ti,hwmods = "davinci_mdio";
 374                                 bus_freq = <1000000>;
 375                                 reg = <0x4a101000 0x100>;
 376                         };
 377
 378                         cpsw_emac0: slave@4a100200 {
 379                                 /* Filled in by U-Boot */
 380                                 mac-address = [ 00 00 00 00 00 00 ];
 381                         };
 382
 383                         cpsw_emac1: slave@4a100300 {
 384                                 /* Filled in by U-Boot */
 385                                 mac-address = [ 00 00 00 00 00 00 ];
 386                         };
 387                 };
 388         };
 389 };