arch/arm/boot/dts/imx23.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 serial0 = &auart0;
  22                 serial1 = &auart1;
  23         };
  24
  25         cpus {
  26                 cpu@0 {
  27                         compatible = "arm,arm926ejs";
  28                 };
  29         };
  30
  31         apb@80000000 {
  32                 compatible = "simple-bus";
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 reg = <0x80000000 0x80000>;
  36                 ranges;
  37
  38                 apbh@80000000 {
  39                         compatible = "simple-bus";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42                         reg = <0x80000000 0x40000>;
  43                         ranges;
  44
  45                         icoll: interrupt-controller@80000000 {
  46                                 compatible = "fsl,imx23-icoll", "fsl,icoll";
  47                                 interrupt-controller;
  48                                 #interrupt-cells = <1>;
  49                                 reg = <0x80000000 0x2000>;
  50                         };
  51
  52                         dma-apbh@80004000 {
  53                                 compatible = "fsl,imx23-dma-apbh";
  54                                 reg = <0x80004000 0x2000>;
  55                                 clocks = <&clks 15>;
  56                         };
  57
  58                         ecc@80008000 {
  59                                 reg = <0x80008000 0x2000>;
  60                                 status = "disabled";
  61                         };
  62
  63                         gpmi-nand@8000c000 {
  64                                 compatible = "fsl,imx23-gpmi-nand";
  65                                 #address-cells = <1>;
  66                                 #size-cells = <1>;
  67                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  68                                 reg-names = "gpmi-nand", "bch";
  69                                 interrupts = <13>, <56>;
  70                                 interrupt-names = "gpmi-dma", "bch";
  71                                 clocks = <&clks 34>;
  72                                 fsl,gpmi-dma-channel = <4>;
  73                                 status = "disabled";
  74                         };
  75
  76                         ssp0: ssp@80010000 {
  77                                 reg = <0x80010000 0x2000>;
  78                                 interrupts = <15 14>;
  79                                 clocks = <&clks 33>;
  80                                 fsl,ssp-dma-channel = <1>;
  81                                 status = "disabled";
  82                         };
  83
  84                         etm@80014000 {
  85                                 reg = <0x80014000 0x2000>;
  86                                 status = "disabled";
  87                         };
  88
  89                         pinctrl@80018000 {
  90                                 #address-cells = <1>;
  91                                 #size-cells = <0>;
  92                                 compatible = "fsl,imx23-pinctrl", "simple-bus";
  93                                 reg = <0x80018000 0x2000>;
  94
  95                                 gpio0: gpio@0 {
  96                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
  97                                         interrupts = <16>;
  98                                         gpio-controller;
  99                                         #gpio-cells = <2>;
 100                                         interrupt-controller;
 101                                         #interrupt-cells = <2>;
 102                                 };
 103
 104                                 gpio1: gpio@1 {
 105                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 106                                         interrupts = <17>;
 107                                         gpio-controller;
 108                                         #gpio-cells = <2>;
 109                                         interrupt-controller;
 110                                         #interrupt-cells = <2>;
 111                                 };
 112
 113                                 gpio2: gpio@2 {
 114                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 115                                         interrupts = <18>;
 116                                         gpio-controller;
 117                                         #gpio-cells = <2>;
 118                                         interrupt-controller;
 119                                         #interrupt-cells = <2>;
 120                                 };
 121
 122                                 duart_pins_a: duart@0 {
 123                                         reg = <0>;
 124                                         fsl,pinmux-ids = <
 125                                                 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
 126                                                 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
 127                                         >;
 128                                         fsl,drive-strength = <0>;
 129                                         fsl,voltage = <1>;
 130                                         fsl,pull-up = <0>;
 131                                 };
 132
 133                                 auart0_pins_a: auart0@0 {
 134                                         reg = <0>;
 135                                         fsl,pinmux-ids = <
 136                                                 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
 137                                                 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
 138                                                 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
 139                                                 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
 140                                         >;
 141                                         fsl,drive-strength = <0>;
 142                                         fsl,voltage = <1>;
 143                                         fsl,pull-up = <0>;
 144                                 };
 145
 146                                 auart0_2pins_a: auart0-2pins@0 {
 147                                         reg = <0>;
 148                                         fsl,pinmux-ids = <
 149                                                 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
 150                                                 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
 151                                         >;
 152                                         fsl,drive-strength = <0>;
 153                                         fsl,voltage = <1>;
 154                                         fsl,pull-up = <0>;
 155                                 };
 156
 157                                 gpmi_pins_a: gpmi-nand@0 {
 158                                         reg = <0>;
 159                                         fsl,pinmux-ids = <
 160                                                 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
 161                                                 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
 162                                                 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
 163                                                 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
 164                                                 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
 165                                                 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
 166                                                 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
 167                                                 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
 168                                                 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
 169                                                 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
 170                                                 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
 171                                                 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
 172                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 173                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 174                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 175                                                 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
 176                                                 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
 177                                         >;
 178                                         fsl,drive-strength = <0>;
 179                                         fsl,voltage = <1>;
 180                                         fsl,pull-up = <0>;
 181                                 };
 182
 183                                 gpmi_pins_fixup: gpmi-pins-fixup {
 184                                         fsl,pinmux-ids = <
 185                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 186                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 187                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 188                                         >;
 189                                         fsl,drive-strength = <2>;
 190                                 };
 191
 192                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 193                                         reg = <0>;
 194                                         fsl,pinmux-ids = <
 195                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 196                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 197                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 198                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 199                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 200                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 201                                         >;
 202                                         fsl,drive-strength = <1>;
 203                                         fsl,voltage = <1>;
 204                                         fsl,pull-up = <1>;
 205                                 };
 206
 207                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 208                                         reg = <0>;
 209                                         fsl,pinmux-ids = <
 210                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 211                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 212                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 213                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 214                                                 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
 215                                                 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
 216                                                 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
 217                                                 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
 218                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 219                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 220                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 221                                         >;
 222                                         fsl,drive-strength = <1>;
 223                                         fsl,voltage = <1>;
 224                                         fsl,pull-up = <1>;
 225                                 };
 226
 227                                 mmc0_pins_fixup: mmc0-pins-fixup {
 228                                         fsl,pinmux-ids = <
 229                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 230                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 231                                         >;
 232                                         fsl,pull-up = <0>;
 233                                 };
 234
 235                                 pwm2_pins_a: pwm2@0 {
 236                                         reg = <0>;
 237                                         fsl,pinmux-ids = <
 238                                                 0x11c0 /* MX23_PAD_PWM2__PWM2 */
 239                                         >;
 240                                         fsl,drive-strength = <0>;
 241                                         fsl,voltage = <1>;
 242                                         fsl,pull-up = <0>;
 243                                 };
 244
 245                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 246                                         reg = <0>;
 247                                         fsl,pinmux-ids = <
 248                                                 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
 249                                                 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
 250                                                 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
 251                                                 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
 252                                                 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
 253                                                 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
 254                                                 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
 255                                                 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
 256                                                 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
 257                                                 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
 258                                                 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
 259                                                 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
 260                                                 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
 261                                                 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
 262                                                 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
 263                                                 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
 264                                                 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
 265                                                 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
 266                                                 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
 267                                                 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
 268                                                 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
 269                                                 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
 270                                                 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
 271                                                 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
 272                                                 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
 273                                                 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
 274                                                 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
 275                                                 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
 276                                         >;
 277                                         fsl,drive-strength = <0>;
 278                                         fsl,voltage = <1>;
 279                                         fsl,pull-up = <0>;
 280                                 };
 281                         };
 282
 283                         digctl@8001c000 {
 284                                 reg = <0x8001c000 2000>;
 285                                 status = "disabled";
 286                         };
 287
 288                         emi@80020000 {
 289                                 reg = <0x80020000 0x2000>;
 290                                 status = "disabled";
 291                         };
 292
 293                         dma-apbx@80024000 {
 294                                 compatible = "fsl,imx23-dma-apbx";
 295                                 reg = <0x80024000 0x2000>;
 296                                 clocks = <&clks 16>;
 297                         };
 298
 299                         dcp@80028000 {
 300                                 reg = <0x80028000 0x2000>;
 301                                 status = "disabled";
 302                         };
 303
 304                         pxp@8002a000 {
 305                                 reg = <0x8002a000 0x2000>;
 306                                 status = "disabled";
 307                         };
 308
 309                         ocotp@8002c000 {
 310                                 reg = <0x8002c000 0x2000>;
 311                                 status = "disabled";
 312                         };
 313
 314                         axi-ahb@8002e000 {
 315                                 reg = <0x8002e000 0x2000>;
 316                                 status = "disabled";
 317                         };
 318
 319                         lcdif@80030000 {
 320                                 compatible = "fsl,imx23-lcdif";
 321                                 reg = <0x80030000 2000>;
 322                                 interrupts = <46 45>;
 323                                 clocks = <&clks 38>;
 324                                 status = "disabled";
 325                         };
 326
 327                         ssp1: ssp@80034000 {
 328                                 reg = <0x80034000 0x2000>;
 329                                 interrupts = <2 20>;
 330                                 clocks = <&clks 33>;
 331                                 fsl,ssp-dma-channel = <2>;
 332                                 status = "disabled";
 333                         };
 334
 335                         tvenc@80038000 {
 336                                 reg = <0x80038000 0x2000>;
 337                                 status = "disabled";
 338                         };
 339                 };
 340
 341                 apbx@80040000 {
 342                         compatible = "simple-bus";
 343                         #address-cells = <1>;
 344                         #size-cells = <1>;
 345                         reg = <0x80040000 0x40000>;
 346                         ranges;
 347
 348                         clks: clkctrl@80040000 {
 349                                 compatible = "fsl,imx23-clkctrl";
 350                                 reg = <0x80040000 0x2000>;
 351                                 #clock-cells = <1>;
 352                         };
 353
 354                         saif0: saif@80042000 {
 355                                 reg = <0x80042000 0x2000>;
 356                                 status = "disabled";
 357                         };
 358
 359                         power@80044000 {
 360                                 reg = <0x80044000 0x2000>;
 361                                 status = "disabled";
 362                         };
 363
 364                         saif1: saif@80046000 {
 365                                 reg = <0x80046000 0x2000>;
 366                                 status = "disabled";
 367                         };
 368
 369                         audio-out@80048000 {
 370                                 reg = <0x80048000 0x2000>;
 371                                 status = "disabled";
 372                         };
 373
 374                         audio-in@8004c000 {
 375                                 reg = <0x8004c000 0x2000>;
 376                                 status = "disabled";
 377                         };
 378
 379                         lradc@80050000 {
 380                                 reg = <0x80050000 0x2000>;
 381                                 status = "disabled";
 382                         };
 383
 384                         spdif@80054000 {
 385                                 reg = <0x80054000 2000>;
 386                                 status = "disabled";
 387                         };
 388
 389                         i2c@80058000 {
 390                                 reg = <0x80058000 0x2000>;
 391                                 status = "disabled";
 392                         };
 393
 394                         rtc@8005c000 {
 395                                 compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
 396                                 reg = <0x8005c000 0x2000>;
 397                                 interrupts = <22>;
 398                         };
 399
 400                         pwm: pwm@80064000 {
 401                                 compatible = "fsl,imx23-pwm";
 402                                 reg = <0x80064000 0x2000>;
 403                                 clocks = <&clks 30>;
 404                                 #pwm-cells = <2>;
 405                                 fsl,pwm-number = <5>;
 406                                 status = "disabled";
 407                         };
 408
 409                         timrot@80068000 {
 410                                 compatible = "fsl,imx23-timrot", "fsl,timrot";
 411                                 reg = <0x80068000 0x2000>;
 412                                 interrupts = <28 29 30 31>;
 413                         };
 414
 415                         auart0: serial@8006c000 {
 416                                 compatible = "fsl,imx23-auart";
 417                                 reg = <0x8006c000 0x2000>;
 418                                 interrupts = <24 25 23>;
 419                                 clocks = <&clks 32>;
 420                                 status = "disabled";
 421                         };
 422
 423                         auart1: serial@8006e000 {
 424                                 compatible = "fsl,imx23-auart";
 425                                 reg = <0x8006e000 0x2000>;
 426                                 interrupts = <59 60 58>;
 427                                 clocks = <&clks 32>;
 428                                 status = "disabled";
 429                         };
 430
 431                         duart: serial@80070000 {
 432                                 compatible = "arm,pl011", "arm,primecell";
 433                                 reg = <0x80070000 0x2000>;
 434                                 interrupts = <0>;
 435                                 clocks = <&clks 32>, <&clks 16>;
 436                                 clock-names = "uart", "apb_pclk";
 437                                 status = "disabled";
 438                         };
 439
 440                         usbphy0: usbphy@8007c000 {
 441                                 compatible = "fsl,imx23-usbphy";
 442                                 reg = <0x8007c000 0x2000>;
 443                                 clocks = <&clks 41>;
 444                                 status = "disabled";
 445                         };
 446                 };
 447         };
 448
 449         ahb@80080000 {
 450                 compatible = "simple-bus";
 451                 #address-cells = <1>;
 452                 #size-cells = <1>;
 453                 reg = <0x80080000 0x80000>;
 454                 ranges;
 455
 456                 usb0: usb@80080000 {
 457                         compatible = "fsl,imx23-usb", "fsl,imx27-usb";
 458                         reg = <0x80080000 0x40000>;
 459                         interrupts = <11>;
 460                         fsl,usbphy = <&usbphy0>;
 461                         clocks = <&clks 40>;
 462                         status = "disabled";
 463                 };
 464         };
 465 };