drivers/gpu/drm/gma500/oaktrail_device.c

   1 /**************************************************************************
   2  * Copyright (c) 2011, Intel Corporation.
   3  * All Rights Reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms and conditions of the GNU General Public License,
   7  * version 2, as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  17  *
  18  **************************************************************************/
  19
  20 #include <linux/backlight.h>
  21 #include <linux/module.h>
  22 #include <linux/dmi.h>
  23 #include <drm/drmP.h>
  24 #include <drm/drm.h>
  25 #include "gma_drm.h"
  26 #include "psb_drv.h"
  27 #include "psb_reg.h"
  28 #include "psb_intel_reg.h"
  29 #include <asm/mrst.h>
  30 #include <asm/intel_scu_ipc.h>
  31 #include "mid_bios.h"
  32 #include "intel_bios.h"
  33
  34 static int oaktrail_output_init(struct drm_device *dev)
  35 {
  36         struct drm_psb_private *dev_priv = dev->dev_private;
  37         if (dev_priv->iLVDS_enable)
  38                 oaktrail_lvds_init(dev, &dev_priv->mode_dev);
  39         else
  40                 dev_err(dev->dev, "DSI is not supported\n");
  41         if (dev_priv->hdmi_priv)
  42                 oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
  43         return 0;
  44 }
  45
  46 /*
  47  *      Provide the low level interfaces for the Moorestown backlight
  48  */
  49
  50 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
  51
  52 #define MRST_BLC_MAX_PWM_REG_FREQ           0xFFFF
  53 #define BLC_PWM_PRECISION_FACTOR 100    /* 10000000 */
  54 #define BLC_PWM_FREQ_CALC_CONSTANT 32
  55 #define MHz 1000000
  56 #define BLC_ADJUSTMENT_MAX 100
  57
  58 static struct backlight_device *oaktrail_backlight_device;
  59 static int oaktrail_brightness;
  60
  61 static int oaktrail_set_brightness(struct backlight_device *bd)
  62 {
  63         struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
  64         struct drm_psb_private *dev_priv = dev->dev_private;
  65         int level = bd->props.brightness;
  66         u32 blc_pwm_ctl;
  67         u32 max_pwm_blc;
  68
  69         /* Percentage 1-100% being valid */
  70         if (level < 1)
  71                 level = 1;
  72
  73         if (gma_power_begin(dev, 0)) {
  74                 /* Calculate and set the brightness value */
  75                 max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
  76                 blc_pwm_ctl = level * max_pwm_blc / 100;
  77
  78                 /* Adjust the backlight level with the percent in
  79                  * dev_priv->blc_adj1;
  80                  */
  81                 blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
  82                 blc_pwm_ctl = blc_pwm_ctl / 100;
  83
  84                 /* Adjust the backlight level with the percent in
  85                  * dev_priv->blc_adj2;
  86                  */
  87                 blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
  88                 blc_pwm_ctl = blc_pwm_ctl / 100;
  89
  90                 /* force PWM bit on */
  91                 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
  92                 REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
  93                 gma_power_end(dev);
  94         }
  95         oaktrail_brightness = level;
  96         return 0;
  97 }
  98
  99 static int oaktrail_get_brightness(struct backlight_device *bd)
 100 {
 101         /* return locally cached var instead of HW read (due to DPST etc.) */
 102         /* FIXME: ideally return actual value in case firmware fiddled with
 103            it */
 104         return oaktrail_brightness;
 105 }
 106
 107 static int device_backlight_init(struct drm_device *dev)
 108 {
 109         struct drm_psb_private *dev_priv = dev->dev_private;
 110         unsigned long core_clock;
 111         u16 bl_max_freq;
 112         uint32_t value;
 113         uint32_t blc_pwm_precision_factor;
 114
 115         dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
 116         dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
 117         bl_max_freq = 256;
 118         /* this needs to be set elsewhere */
 119         blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
 120
 121         core_clock = dev_priv->core_freq;
 122
 123         value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
 124         value *= blc_pwm_precision_factor;
 125         value /= bl_max_freq;
 126         value /= blc_pwm_precision_factor;
 127
 128         if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
 129                         return -ERANGE;
 130
 131         if (gma_power_begin(dev, false)) {
 132                 REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
 133                 REG_WRITE(BLC_PWM_CTL, value | (value << 16));
 134                 gma_power_end(dev);
 135         }
 136         return 0;
 137 }
 138
 139 static const struct backlight_ops oaktrail_ops = {
 140         .get_brightness = oaktrail_get_brightness,
 141         .update_status  = oaktrail_set_brightness,
 142 };
 143
 144 static int oaktrail_backlight_init(struct drm_device *dev)
 145 {
 146         struct drm_psb_private *dev_priv = dev->dev_private;
 147         int ret;
 148         struct backlight_properties props;
 149
 150         memset(&props, 0, sizeof(struct backlight_properties));
 151         props.max_brightness = 100;
 152         props.type = BACKLIGHT_PLATFORM;
 153
 154         oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
 155                                 NULL, (void *)dev, &oaktrail_ops, &props);
 156
 157         if (IS_ERR(oaktrail_backlight_device))
 158                 return PTR_ERR(oaktrail_backlight_device);
 159
 160         ret = device_backlight_init(dev);
 161         if (ret < 0) {
 162                 backlight_device_unregister(oaktrail_backlight_device);
 163                 return ret;
 164         }
 165         oaktrail_backlight_device->props.brightness = 100;
 166         oaktrail_backlight_device->props.max_brightness = 100;
 167         backlight_update_status(oaktrail_backlight_device);
 168         dev_priv->backlight_device = oaktrail_backlight_device;
 169         return 0;
 170 }
 171
 172 #endif
 173
 174 /*
 175  *      Provide the Moorestown specific chip logic and low level methods
 176  *      for power management
 177  */
 178
 179 /**
 180  *      oaktrail_save_display_registers -       save registers lost on suspend
 181  *      @dev: our DRM device
 182  *
 183  *      Save the state we need in order to be able to restore the interface
 184  *      upon resume from suspend
 185  */
 186 static int oaktrail_save_display_registers(struct drm_device *dev)
 187 {
 188         struct drm_psb_private *dev_priv = dev->dev_private;
 189         struct psb_save_area *regs = &dev_priv->regs;
 190         int i;
 191         u32 pp_stat;
 192
 193         /* Display arbitration control + watermarks */
 194         regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
 195         regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
 196         regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
 197         regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
 198         regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
 199         regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
 200         regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
 201         regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
 202
 203         /* Pipe & plane A info */
 204         regs->psb.savePIPEACONF = PSB_RVDC32(PIPEACONF);
 205         regs->psb.savePIPEASRC = PSB_RVDC32(PIPEASRC);
 206         regs->psb.saveFPA0 = PSB_RVDC32(MRST_FPA0);
 207         regs->psb.saveFPA1 = PSB_RVDC32(MRST_FPA1);
 208         regs->psb.saveDPLL_A = PSB_RVDC32(MRST_DPLL_A);
 209         regs->psb.saveHTOTAL_A = PSB_RVDC32(HTOTAL_A);
 210         regs->psb.saveHBLANK_A = PSB_RVDC32(HBLANK_A);
 211         regs->psb.saveHSYNC_A = PSB_RVDC32(HSYNC_A);
 212         regs->psb.saveVTOTAL_A = PSB_RVDC32(VTOTAL_A);
 213         regs->psb.saveVBLANK_A = PSB_RVDC32(VBLANK_A);
 214         regs->psb.saveVSYNC_A = PSB_RVDC32(VSYNC_A);
 215         regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
 216         regs->psb.saveDSPACNTR = PSB_RVDC32(DSPACNTR);
 217         regs->psb.saveDSPASTRIDE = PSB_RVDC32(DSPASTRIDE);
 218         regs->psb.saveDSPAADDR = PSB_RVDC32(DSPABASE);
 219         regs->psb.saveDSPASURF = PSB_RVDC32(DSPASURF);
 220         regs->psb.saveDSPALINOFF = PSB_RVDC32(DSPALINOFF);
 221         regs->psb.saveDSPATILEOFF = PSB_RVDC32(DSPATILEOFF);
 222
 223         /* Save cursor regs */
 224         regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
 225         regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
 226         regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
 227
 228         /* Save palette (gamma) */
 229         for (i = 0; i < 256; i++)
 230                 regs->psb.save_palette_a[i] = PSB_RVDC32(PALETTE_A + (i << 2));
 231
 232         if (dev_priv->hdmi_priv)
 233                 oaktrail_hdmi_save(dev);
 234
 235         /* Save performance state */
 236         regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
 237
 238         /* LVDS state */
 239         regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
 240         regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
 241         regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
 242         regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
 243         regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
 244         regs->psb.saveLVDS = PSB_RVDC32(LVDS);
 245         regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
 246         regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
 247         regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
 248         regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
 249
 250         /* HW overlay */
 251         regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
 252         regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
 253         regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
 254         regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
 255         regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
 256         regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
 257         regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
 258
 259         /* DPST registers */
 260         regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
 261                                         PSB_RVDC32(HISTOGRAM_INT_CONTROL);
 262         regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
 263                                         PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
 264         regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
 265
 266         if (dev_priv->iLVDS_enable) {
 267                 /* Shut down the panel */
 268                 PSB_WVDC32(0, PP_CONTROL);
 269
 270                 do {
 271                         pp_stat = PSB_RVDC32(PP_STATUS);
 272                 } while (pp_stat & 0x80000000);
 273
 274                 /* Turn off the plane */
 275                 PSB_WVDC32(0x58000000, DSPACNTR);
 276                 /* Trigger the plane disable */
 277                 PSB_WVDC32(0, DSPASURF);
 278
 279                 /* Wait ~4 ticks */
 280                 msleep(4);
 281
 282                 /* Turn off pipe */
 283                 PSB_WVDC32(0x0, PIPEACONF);
 284                 /* Wait ~8 ticks */
 285                 msleep(8);
 286
 287                 /* Turn off PLLs */
 288                 PSB_WVDC32(0, MRST_DPLL_A);
 289         }
 290         return 0;
 291 }
 292
 293 /**
 294  *      oaktrail_restore_display_registers      -       restore lost register state
 295  *      @dev: our DRM device
 296  *
 297  *      Restore register state that was lost during suspend and resume.
 298  */
 299 static int oaktrail_restore_display_registers(struct drm_device *dev)
 300 {
 301         struct drm_psb_private *dev_priv = dev->dev_private;
 302         struct psb_save_area *regs = &dev_priv->regs;
 303         u32 pp_stat;
 304         int i;
 305
 306         /* Display arbitration + watermarks */
 307         PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
 308         PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
 309         PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
 310         PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
 311         PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
 312         PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
 313         PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
 314         PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
 315
 316         /* Make sure VGA plane is off. it initializes to on after reset!*/
 317         PSB_WVDC32(0x80000000, VGACNTRL);
 318
 319         /* set the plls */
 320         PSB_WVDC32(regs->psb.saveFPA0, MRST_FPA0);
 321         PSB_WVDC32(regs->psb.saveFPA1, MRST_FPA1);
 322
 323         /* Actually enable it */
 324         PSB_WVDC32(regs->psb.saveDPLL_A, MRST_DPLL_A);
 325         DRM_UDELAY(150);
 326
 327         /* Restore mode */
 328         PSB_WVDC32(regs->psb.saveHTOTAL_A, HTOTAL_A);
 329         PSB_WVDC32(regs->psb.saveHBLANK_A, HBLANK_A);
 330         PSB_WVDC32(regs->psb.saveHSYNC_A, HSYNC_A);
 331         PSB_WVDC32(regs->psb.saveVTOTAL_A, VTOTAL_A);
 332         PSB_WVDC32(regs->psb.saveVBLANK_A, VBLANK_A);
 333         PSB_WVDC32(regs->psb.saveVSYNC_A, VSYNC_A);
 334         PSB_WVDC32(regs->psb.savePIPEASRC, PIPEASRC);
 335         PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
 336
 337         /* Restore performance mode*/
 338         PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
 339
 340         /* Enable the pipe*/
 341         if (dev_priv->iLVDS_enable)
 342                 PSB_WVDC32(regs->psb.savePIPEACONF, PIPEACONF);
 343
 344         /* Set up the plane*/
 345         PSB_WVDC32(regs->psb.saveDSPALINOFF, DSPALINOFF);
 346         PSB_WVDC32(regs->psb.saveDSPASTRIDE, DSPASTRIDE);
 347         PSB_WVDC32(regs->psb.saveDSPATILEOFF, DSPATILEOFF);
 348
 349         /* Enable the plane */
 350         PSB_WVDC32(regs->psb.saveDSPACNTR, DSPACNTR);
 351         PSB_WVDC32(regs->psb.saveDSPASURF, DSPASURF);
 352
 353         /* Enable Cursor A */
 354         PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
 355         PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
 356         PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
 357
 358         /* Restore palette (gamma) */
 359         for (i = 0; i < 256; i++)
 360                 PSB_WVDC32(regs->psb.save_palette_a[i], PALETTE_A + (i << 2));
 361
 362         if (dev_priv->hdmi_priv)
 363                 oaktrail_hdmi_restore(dev);
 364
 365         if (dev_priv->iLVDS_enable) {
 366                 PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
 367                 PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
 368                 PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
 369                 PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
 370                 PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
 371                 PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
 372                 PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
 373                 PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
 374                 PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
 375                 PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
 376         }
 377
 378         /* Wait for cycle delay */
 379         do {
 380                 pp_stat = PSB_RVDC32(PP_STATUS);
 381         } while (pp_stat & 0x08000000);
 382
 383         /* Wait for panel power up */
 384         do {
 385                 pp_stat = PSB_RVDC32(PP_STATUS);
 386         } while (pp_stat & 0x10000000);
 387
 388         /* Restore HW overlay */
 389         PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
 390         PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
 391         PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
 392         PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
 393         PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
 394         PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
 395         PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
 396
 397         /* DPST registers */
 398         PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
 399                                                 HISTOGRAM_INT_CONTROL);
 400         PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
 401                                                 HISTOGRAM_LOGIC_CONTROL);
 402         PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
 403
 404         return 0;
 405 }
 406
 407 /**
 408  *      oaktrail_power_down     -       power down the display island
 409  *      @dev: our DRM device
 410  *
 411  *      Power down the display interface of our device
 412  */
 413 static int oaktrail_power_down(struct drm_device *dev)
 414 {
 415         struct drm_psb_private *dev_priv = dev->dev_private;
 416         u32 pwr_mask ;
 417         u32 pwr_sts;
 418
 419         pwr_mask = PSB_PWRGT_DISPLAY_MASK;
 420         outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
 421
 422         while (true) {
 423                 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
 424                 if ((pwr_sts & pwr_mask) == pwr_mask)
 425                         break;
 426                 else
 427                         udelay(10);
 428         }
 429         return 0;
 430 }
 431
 432 /*
 433  * oaktrail_power_up
 434  *
 435  * Restore power to the specified island(s) (powergating)
 436  */
 437 static int oaktrail_power_up(struct drm_device *dev)
 438 {
 439         struct drm_psb_private *dev_priv = dev->dev_private;
 440         u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
 441         u32 pwr_sts, pwr_cnt;
 442
 443         pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
 444         pwr_cnt &= ~pwr_mask;
 445         outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
 446
 447         while (true) {
 448                 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
 449                 if ((pwr_sts & pwr_mask) == 0)
 450                         break;
 451                 else
 452                         udelay(10);
 453         }
 454         return 0;
 455 }
 456
 457
 458 static int oaktrail_chip_setup(struct drm_device *dev)
 459 {
 460         struct drm_psb_private *dev_priv = dev->dev_private;
 461         int ret;
 462
 463         ret = mid_chip_setup(dev);
 464         if (ret < 0)
 465                 return ret;
 466         if (!dev_priv->has_gct) {
 467                 /* Now pull the BIOS data */
 468                 psb_intel_opregion_init(dev);
 469                 psb_intel_init_bios(dev);
 470         }
 471         oaktrail_hdmi_setup(dev);
 472         return 0;
 473 }
 474
 475 static void oaktrail_teardown(struct drm_device *dev)
 476 {
 477         struct drm_psb_private *dev_priv = dev->dev_private;
 478
 479         oaktrail_hdmi_teardown(dev);
 480         if (!dev_priv->has_gct)
 481                 psb_intel_destroy_bios(dev);
 482 }
 483
 484 const struct psb_ops oaktrail_chip_ops = {
 485         .name = "Oaktrail",
 486         .accel_2d = 1,
 487         .pipes = 2,
 488         .crtcs = 2,
 489         .hdmi_mask = (1 << 0),
 490         .lvds_mask = (1 << 0),
 491         .sgx_offset = MRST_SGX_OFFSET,
 492
 493         .chip_setup = oaktrail_chip_setup,
 494         .chip_teardown = oaktrail_teardown,
 495         .crtc_helper = &oaktrail_helper_funcs,
 496         .crtc_funcs = &psb_intel_crtc_funcs,
 497
 498         .output_init = oaktrail_output_init,
 499
 500 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 501         .backlight_init = oaktrail_backlight_init,
 502 #endif
 503
 504         .save_regs = oaktrail_save_display_registers,
 505         .restore_regs = oaktrail_restore_display_registers,
 506         .power_down = oaktrail_power_down,
 507         .power_up = oaktrail_power_up,
 508
 509         .i2c_bus = 1,
 510 };