drivers/staging/tm6000/tm6000-cards.c

   1 /*
   2  *  tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
   3  *
   4  *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation version 2
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/init.h>
  21 #include <linux/module.h>
  22 #include <linux/pci.h>
  23 #include <linux/delay.h>
  24 #include <linux/i2c.h>
  25 #include <linux/usb.h>
  26 #include <linux/slab.h>
  27 #include <media/v4l2-common.h>
  28 #include <media/tuner.h>
  29 #include <media/tvaudio.h>
  30 #include <media/i2c-addr.h>
  31 #include <media/rc-map.h>
  32
  33 #include "tm6000.h"
  34 #include "tm6000-regs.h"
  35 #include "tuner-xc2028.h"
  36 #include "xc5000.h"
  37
  38 #define TM6000_BOARD_UNKNOWN                    0
  39 #define TM5600_BOARD_GENERIC                    1
  40 #define TM6000_BOARD_GENERIC                    2
  41 #define TM6010_BOARD_GENERIC                    3
  42 #define TM5600_BOARD_10MOONS_UT821              4
  43 #define TM5600_BOARD_10MOONS_UT330              5
  44 #define TM6000_BOARD_ADSTECH_DUAL_TV            6
  45 #define TM6000_BOARD_FREECOM_AND_SIMILAR        7
  46 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV       8
  47 #define TM6010_BOARD_HAUPPAUGE_900H             9
  48 #define TM6010_BOARD_BEHOLD_WANDER              10
  49 #define TM6010_BOARD_BEHOLD_VOYAGER             11
  50 #define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
  51 #define TM6010_BOARD_TWINHAN_TU501              13
  52 #define TM6010_BOARD_BEHOLD_WANDER_LITE         14
  53 #define TM6010_BOARD_BEHOLD_VOYAGER_LITE        15
  54 #define TM5600_BOARD_TERRATEC_GRABSTER          16
  55
  56 #define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
  57                            (model == TM5600_BOARD_GENERIC) || \
  58                            (model == TM6000_BOARD_GENERIC) || \
  59                            (model == TM6010_BOARD_GENERIC))
  60
  61 #define TM6000_MAXBOARDS        16
  62 static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
  63
  64 module_param_array(card,  int, NULL, 0444);
  65
  66 static unsigned long tm6000_devused;
  67
  68
  69 struct tm6000_board {
  70         char            *name;
  71         char            eename[16];             /* EEPROM name */
  72         unsigned        eename_size;            /* size of EEPROM name */
  73         unsigned        eename_pos;             /* Position where it appears at ROM */
  74
  75         struct tm6000_capabilities caps;
  76
  77         enum            tm6000_devtype type;    /* variant of the chipset */
  78         int             tuner_type;     /* type of the tuner */
  79         int             tuner_addr;     /* tuner address */
  80         int             demod_addr;     /* demodulator address */
  81
  82         struct tm6000_gpio gpio;
  83
  84         struct tm6000_input     vinput[3];
  85         struct tm6000_input     rinput;
  86
  87         char            *ir_codes;
  88 };
  89
  90 static struct tm6000_board tm6000_boards[] = {
  91         [TM6000_BOARD_UNKNOWN] = {
  92                 .name         = "Unknown tm6000 video grabber",
  93                 .caps = {
  94                         .has_tuner      = 1,
  95                         .has_eeprom     = 1,
  96                 },
  97                 .gpio = {
  98                         .tuner_reset    = TM6000_GPIO_1,
  99                 },
 100                 .vinput = { {
 101                         .type   = TM6000_INPUT_TV,
 102                         .vmux   = TM6000_VMUX_VIDEO_B,
 103                         .amux   = TM6000_AMUX_ADC1,
 104                         }, {
 105                         .type   = TM6000_INPUT_COMPOSITE1,
 106                         .vmux   = TM6000_VMUX_VIDEO_A,
 107                         .amux   = TM6000_AMUX_ADC2,
 108                         }, {
 109                         .type   = TM6000_INPUT_SVIDEO,
 110                         .vmux   = TM6000_VMUX_VIDEO_AB,
 111                         .amux   = TM6000_AMUX_ADC2,
 112                         },
 113                 },
 114         },
 115         [TM5600_BOARD_GENERIC] = {
 116                 .name         = "Generic tm5600 board",
 117                 .type         = TM5600,
 118                 .tuner_type   = TUNER_XC2028,
 119                 .tuner_addr   = 0xc2 >> 1,
 120                 .caps = {
 121                         .has_tuner      = 1,
 122                         .has_eeprom     = 1,
 123                 },
 124                 .gpio = {
 125                         .tuner_reset    = TM6000_GPIO_1,
 126                 },
 127                 .vinput = { {
 128                         .type   = TM6000_INPUT_TV,
 129                         .vmux   = TM6000_VMUX_VIDEO_B,
 130                         .amux   = TM6000_AMUX_ADC1,
 131                         }, {
 132                         .type   = TM6000_INPUT_COMPOSITE1,
 133                         .vmux   = TM6000_VMUX_VIDEO_A,
 134                         .amux   = TM6000_AMUX_ADC2,
 135                         }, {
 136                         .type   = TM6000_INPUT_SVIDEO,
 137                         .vmux   = TM6000_VMUX_VIDEO_AB,
 138                         .amux   = TM6000_AMUX_ADC2,
 139                         },
 140                 },
 141         },
 142         [TM6000_BOARD_GENERIC] = {
 143                 .name         = "Generic tm6000 board",
 144                 .tuner_type   = TUNER_XC2028,
 145                 .tuner_addr   = 0xc2 >> 1,
 146                 .caps = {
 147                         .has_tuner      = 1,
 148                         .has_eeprom     = 1,
 149                 },
 150                 .gpio = {
 151                         .tuner_reset    = TM6000_GPIO_1,
 152                 },
 153                 .vinput = { {
 154                         .type   = TM6000_INPUT_TV,
 155                         .vmux   = TM6000_VMUX_VIDEO_B,
 156                         .amux   = TM6000_AMUX_ADC1,
 157                         }, {
 158                         .type   = TM6000_INPUT_COMPOSITE1,
 159                         .vmux   = TM6000_VMUX_VIDEO_A,
 160                         .amux   = TM6000_AMUX_ADC2,
 161                         }, {
 162                         .type   = TM6000_INPUT_SVIDEO,
 163                         .vmux   = TM6000_VMUX_VIDEO_AB,
 164                         .amux   = TM6000_AMUX_ADC2,
 165                         },
 166                 },
 167         },
 168         [TM6010_BOARD_GENERIC] = {
 169                 .name         = "Generic tm6010 board",
 170                 .type         = TM6010,
 171                 .tuner_type   = TUNER_XC2028,
 172                 .tuner_addr   = 0xc2 >> 1,
 173                 .demod_addr   = 0x1e >> 1,
 174                 .caps = {
 175                         .has_tuner      = 1,
 176                         .has_dvb        = 1,
 177                         .has_zl10353    = 1,
 178                         .has_eeprom     = 1,
 179                         .has_remote     = 1,
 180                 },
 181                 .gpio = {
 182                         .tuner_reset    = TM6010_GPIO_2,
 183                         .tuner_on       = TM6010_GPIO_3,
 184                         .demod_reset    = TM6010_GPIO_1,
 185                         .demod_on       = TM6010_GPIO_4,
 186                         .power_led      = TM6010_GPIO_7,
 187                         .dvb_led        = TM6010_GPIO_5,
 188                         .ir             = TM6010_GPIO_0,
 189                 },
 190                 .vinput = { {
 191                         .type   = TM6000_INPUT_TV,
 192                         .vmux   = TM6000_VMUX_VIDEO_B,
 193                         .amux   = TM6000_AMUX_SIF1,
 194                         }, {
 195                         .type   = TM6000_INPUT_COMPOSITE1,
 196                         .vmux   = TM6000_VMUX_VIDEO_A,
 197                         .amux   = TM6000_AMUX_ADC2,
 198                         }, {
 199                         .type   = TM6000_INPUT_SVIDEO,
 200                         .vmux   = TM6000_VMUX_VIDEO_AB,
 201                         .amux   = TM6000_AMUX_ADC2,
 202                         },
 203                 },
 204         },
 205         [TM5600_BOARD_10MOONS_UT821] = {
 206                 .name         = "10Moons UT 821",
 207                 .tuner_type   = TUNER_XC2028,
 208                 .eename       = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
 209                 .eename_size  = 14,
 210                 .eename_pos   = 0x14,
 211                 .type         = TM5600,
 212                 .tuner_addr   = 0xc2 >> 1,
 213                 .caps = {
 214                         .has_tuner    = 1,
 215                         .has_eeprom   = 1,
 216                 },
 217                 .gpio = {
 218                         .tuner_reset    = TM6000_GPIO_1,
 219                 },
 220                 .vinput = { {
 221                         .type   = TM6000_INPUT_TV,
 222                         .vmux   = TM6000_VMUX_VIDEO_B,
 223                         .amux   = TM6000_AMUX_ADC1,
 224                         }, {
 225                         .type   = TM6000_INPUT_COMPOSITE1,
 226                         .vmux   = TM6000_VMUX_VIDEO_A,
 227                         .amux   = TM6000_AMUX_ADC2,
 228                         }, {
 229                         .type   = TM6000_INPUT_SVIDEO,
 230                         .vmux   = TM6000_VMUX_VIDEO_AB,
 231                         .amux   = TM6000_AMUX_ADC2,
 232                         },
 233                 },
 234         },
 235         [TM5600_BOARD_10MOONS_UT330] = {
 236                 .name         = "10Moons UT 330",
 237                 .tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
 238                 .tuner_addr   = 0xc8 >> 1,
 239                 .caps = {
 240                         .has_tuner    = 1,
 241                         .has_dvb      = 0,
 242                         .has_zl10353  = 0,
 243                         .has_eeprom   = 1,
 244                 },
 245                 .vinput = { {
 246                         .type   = TM6000_INPUT_TV,
 247                         .vmux   = TM6000_VMUX_VIDEO_B,
 248                         .amux   = TM6000_AMUX_ADC1,
 249                         }, {
 250                         .type   = TM6000_INPUT_COMPOSITE1,
 251                         .vmux   = TM6000_VMUX_VIDEO_A,
 252                         .amux   = TM6000_AMUX_ADC2,
 253                         }, {
 254                         .type   = TM6000_INPUT_SVIDEO,
 255                         .vmux   = TM6000_VMUX_VIDEO_AB,
 256                         .amux   = TM6000_AMUX_ADC2,
 257                         },
 258                 },
 259         },
 260         [TM6000_BOARD_ADSTECH_DUAL_TV] = {
 261                 .name         = "ADSTECH Dual TV USB",
 262                 .tuner_type   = TUNER_XC2028,
 263                 .tuner_addr   = 0xc8 >> 1,
 264                 .caps = {
 265                         .has_tuner    = 1,
 266                         .has_tda9874  = 1,
 267                         .has_dvb      = 1,
 268                         .has_zl10353  = 1,
 269                         .has_eeprom   = 1,
 270                 },
 271                 .vinput = { {
 272                         .type   = TM6000_INPUT_TV,
 273                         .vmux   = TM6000_VMUX_VIDEO_B,
 274                         .amux   = TM6000_AMUX_ADC1,
 275                         }, {
 276                         .type   = TM6000_INPUT_COMPOSITE1,
 277                         .vmux   = TM6000_VMUX_VIDEO_A,
 278                         .amux   = TM6000_AMUX_ADC2,
 279                         }, {
 280                         .type   = TM6000_INPUT_SVIDEO,
 281                         .vmux   = TM6000_VMUX_VIDEO_AB,
 282                         .amux   = TM6000_AMUX_ADC2,
 283                         },
 284                 },
 285         },
 286         [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
 287                 .name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
 288                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 289                 .tuner_addr   = 0xc2 >> 1,
 290                 .demod_addr   = 0x1e >> 1,
 291                 .caps = {
 292                         .has_tuner    = 1,
 293                         .has_dvb      = 1,
 294                         .has_zl10353  = 1,
 295                         .has_eeprom   = 0,
 296                         .has_remote   = 1,
 297                 },
 298                 .gpio = {
 299                         .tuner_reset    = TM6000_GPIO_4,
 300                 },
 301                 .vinput = { {
 302                         .type   = TM6000_INPUT_TV,
 303                         .vmux   = TM6000_VMUX_VIDEO_B,
 304                         .amux   = TM6000_AMUX_ADC1,
 305                         }, {
 306                         .type   = TM6000_INPUT_COMPOSITE1,
 307                         .vmux   = TM6000_VMUX_VIDEO_A,
 308                         .amux   = TM6000_AMUX_ADC2,
 309                         }, {
 310                         .type   = TM6000_INPUT_SVIDEO,
 311                         .vmux   = TM6000_VMUX_VIDEO_AB,
 312                         .amux   = TM6000_AMUX_ADC2,
 313                         },
 314                 },
 315         },
 316         [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
 317                 .name         = "ADSTECH Mini Dual TV USB",
 318                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 319                 .tuner_addr   = 0xc8 >> 1,
 320                 .demod_addr   = 0x1e >> 1,
 321                 .caps = {
 322                         .has_tuner    = 1,
 323                         .has_dvb      = 1,
 324                         .has_zl10353  = 1,
 325                         .has_eeprom   = 0,
 326                 },
 327                 .gpio = {
 328                         .tuner_reset    = TM6000_GPIO_4,
 329                 },
 330                 .vinput = { {
 331                         .type   = TM6000_INPUT_TV,
 332                         .vmux   = TM6000_VMUX_VIDEO_B,
 333                         .amux   = TM6000_AMUX_ADC1,
 334                         }, {
 335                         .type   = TM6000_INPUT_COMPOSITE1,
 336                         .vmux   = TM6000_VMUX_VIDEO_A,
 337                         .amux   = TM6000_AMUX_ADC2,
 338                         }, {
 339                         .type   = TM6000_INPUT_SVIDEO,
 340                         .vmux   = TM6000_VMUX_VIDEO_AB,
 341                         .amux   = TM6000_AMUX_ADC2,
 342                         },
 343                 },
 344         },
 345         [TM6010_BOARD_HAUPPAUGE_900H] = {
 346                 .name         = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
 347                 .eename       = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
 348                 .eename_size  = 14,
 349                 .eename_pos   = 0x42,
 350                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 351                 .tuner_addr   = 0xc2 >> 1,
 352                 .demod_addr   = 0x1e >> 1,
 353                 .type         = TM6010,
 354                 .caps = {
 355                         .has_tuner    = 1,
 356                         .has_dvb      = 1,
 357                         .has_zl10353  = 1,
 358                         .has_eeprom   = 1,
 359                         .has_remote   = 1,
 360                 },
 361                 .gpio = {
 362                         .tuner_reset    = TM6010_GPIO_2,
 363                         .tuner_on       = TM6010_GPIO_3,
 364                         .demod_reset    = TM6010_GPIO_1,
 365                         .demod_on       = TM6010_GPIO_4,
 366                         .power_led      = TM6010_GPIO_7,
 367                         .dvb_led        = TM6010_GPIO_5,
 368                         .ir             = TM6010_GPIO_0,
 369                 },
 370                 .vinput = { {
 371                         .type   = TM6000_INPUT_TV,
 372                         .vmux   = TM6000_VMUX_VIDEO_B,
 373                         .amux   = TM6000_AMUX_SIF1,
 374                         }, {
 375                         .type   = TM6000_INPUT_COMPOSITE1,
 376                         .vmux   = TM6000_VMUX_VIDEO_A,
 377                         .amux   = TM6000_AMUX_ADC2,
 378                         }, {
 379                         .type   = TM6000_INPUT_SVIDEO,
 380                         .vmux   = TM6000_VMUX_VIDEO_AB,
 381                         .amux   = TM6000_AMUX_ADC2,
 382                         },
 383                 },
 384         },
 385         [TM6010_BOARD_BEHOLD_WANDER] = {
 386                 .name         = "Beholder Wander DVB-T/TV/FM USB2.0",
 387                 .tuner_type   = TUNER_XC5000,
 388                 .tuner_addr   = 0xc2 >> 1,
 389                 .demod_addr   = 0x1e >> 1,
 390                 .type         = TM6010,
 391                 .caps = {
 392                         .has_tuner      = 1,
 393                         .has_dvb        = 1,
 394                         .has_zl10353    = 1,
 395                         .has_eeprom     = 1,
 396                         .has_remote     = 1,
 397                         .has_radio      = 1,
 398                 },
 399                 .gpio = {
 400                         .tuner_reset    = TM6010_GPIO_0,
 401                         .demod_reset    = TM6010_GPIO_1,
 402                         .power_led      = TM6010_GPIO_6,
 403                 },
 404                 .vinput = { {
 405                         .type   = TM6000_INPUT_TV,
 406                         .vmux   = TM6000_VMUX_VIDEO_B,
 407                         .amux   = TM6000_AMUX_SIF1,
 408                         }, {
 409                         .type   = TM6000_INPUT_COMPOSITE1,
 410                         .vmux   = TM6000_VMUX_VIDEO_A,
 411                         .amux   = TM6000_AMUX_ADC2,
 412                         }, {
 413                         .type   = TM6000_INPUT_SVIDEO,
 414                         .vmux   = TM6000_VMUX_VIDEO_AB,
 415                         .amux   = TM6000_AMUX_ADC2,
 416                         },
 417                 },
 418                 .rinput = {
 419                         .type   = TM6000_INPUT_RADIO,
 420                         .amux   = TM6000_AMUX_ADC1,
 421                 },
 422         },
 423         [TM6010_BOARD_BEHOLD_VOYAGER] = {
 424                 .name         = "Beholder Voyager TV/FM USB2.0",
 425                 .tuner_type   = TUNER_XC5000,
 426                 .tuner_addr   = 0xc2 >> 1,
 427                 .type         = TM6010,
 428                 .caps = {
 429                         .has_tuner      = 1,
 430                         .has_dvb        = 0,
 431                         .has_zl10353    = 0,
 432                         .has_eeprom     = 1,
 433                         .has_remote     = 1,
 434                         .has_radio      = 1,
 435                 },
 436                 .gpio = {
 437                         .tuner_reset    = TM6010_GPIO_0,
 438                         .power_led      = TM6010_GPIO_6,
 439                 },
 440                 .vinput = { {
 441                         .type   = TM6000_INPUT_TV,
 442                         .vmux   = TM6000_VMUX_VIDEO_B,
 443                         .amux   = TM6000_AMUX_SIF1,
 444                         }, {
 445                         .type   = TM6000_INPUT_COMPOSITE1,
 446                         .vmux   = TM6000_VMUX_VIDEO_A,
 447                         .amux   = TM6000_AMUX_ADC2,
 448                         }, {
 449                         .type   = TM6000_INPUT_SVIDEO,
 450                         .vmux   = TM6000_VMUX_VIDEO_AB,
 451                         .amux   = TM6000_AMUX_ADC2,
 452                         },
 453                 },
 454                 .rinput = {
 455                         .type   = TM6000_INPUT_RADIO,
 456                         .amux   = TM6000_AMUX_ADC1,
 457                 },
 458         },
 459         [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
 460                 .name         = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
 461                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 462                 .tuner_addr   = 0xc2 >> 1,
 463                 .demod_addr   = 0x1e >> 1,
 464                 .type         = TM6010,
 465                 .caps = {
 466                         .has_tuner    = 1,
 467                         .has_dvb      = 1,
 468                         .has_zl10353  = 1,
 469                         .has_eeprom   = 1,
 470                         .has_remote   = 1,
 471                 },
 472                 .gpio = {
 473                         .tuner_reset    = TM6010_GPIO_2,
 474                         .tuner_on       = TM6010_GPIO_3,
 475                         .demod_reset    = TM6010_GPIO_1,
 476                         .demod_on       = TM6010_GPIO_4,
 477                         .power_led      = TM6010_GPIO_7,
 478                         .dvb_led        = TM6010_GPIO_5,
 479                         .ir             = TM6010_GPIO_0,
 480                 },
 481                 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 482                 .vinput = { {
 483                         .type   = TM6000_INPUT_TV,
 484                         .vmux   = TM6000_VMUX_VIDEO_B,
 485                         .amux   = TM6000_AMUX_SIF1,
 486                         }, {
 487                         .type   = TM6000_INPUT_COMPOSITE1,
 488                         .vmux   = TM6000_VMUX_VIDEO_A,
 489                         .amux   = TM6000_AMUX_ADC2,
 490                         }, {
 491                         .type   = TM6000_INPUT_SVIDEO,
 492                         .vmux   = TM6000_VMUX_VIDEO_AB,
 493                         .amux   = TM6000_AMUX_ADC2,
 494                         },
 495                 },
 496         },
 497         [TM5600_BOARD_TERRATEC_GRABSTER] = {
 498                 .name         = "Terratec Grabster AV 150/250 MX",
 499                 .type         = TM5600,
 500                 .tuner_type   = TUNER_ABSENT,
 501                 .vinput = { {
 502                         .type   = TM6000_INPUT_TV,
 503                         .vmux   = TM6000_VMUX_VIDEO_B,
 504                         .amux   = TM6000_AMUX_ADC1,
 505                         }, {
 506                         .type   = TM6000_INPUT_COMPOSITE1,
 507                         .vmux   = TM6000_VMUX_VIDEO_A,
 508                         .amux   = TM6000_AMUX_ADC2,
 509                         }, {
 510                         .type   = TM6000_INPUT_SVIDEO,
 511                         .vmux   = TM6000_VMUX_VIDEO_AB,
 512                         .amux   = TM6000_AMUX_ADC2,
 513                         },
 514                 },
 515         },
 516         [TM6010_BOARD_TWINHAN_TU501] = {
 517                 .name         = "Twinhan TU501(704D1)",
 518                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 519                 .tuner_addr   = 0xc2 >> 1,
 520                 .demod_addr   = 0x1e >> 1,
 521                 .type         = TM6010,
 522                 .caps = {
 523                         .has_tuner    = 1,
 524                         .has_dvb      = 1,
 525                         .has_zl10353  = 1,
 526                         .has_eeprom   = 1,
 527                         .has_remote   = 1,
 528                 },
 529                 .gpio = {
 530                         .tuner_reset    = TM6010_GPIO_2,
 531                         .tuner_on       = TM6010_GPIO_3,
 532                         .demod_reset    = TM6010_GPIO_1,
 533                         .demod_on       = TM6010_GPIO_4,
 534                         .power_led      = TM6010_GPIO_7,
 535                         .dvb_led        = TM6010_GPIO_5,
 536                         .ir             = TM6010_GPIO_0,
 537                 },
 538                 .vinput = { {
 539                         .type   = TM6000_INPUT_TV,
 540                         .vmux   = TM6000_VMUX_VIDEO_B,
 541                         .amux   = TM6000_AMUX_SIF1,
 542                         }, {
 543                         .type   = TM6000_INPUT_COMPOSITE1,
 544                         .vmux   = TM6000_VMUX_VIDEO_A,
 545                         .amux   = TM6000_AMUX_ADC2,
 546                         }, {
 547                         .type   = TM6000_INPUT_SVIDEO,
 548                         .vmux   = TM6000_VMUX_VIDEO_AB,
 549                         .amux   = TM6000_AMUX_ADC2,
 550                         },
 551                 },
 552         },
 553         [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
 554                 .name         = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
 555                 .tuner_type   = TUNER_XC5000,
 556                 .tuner_addr   = 0xc2 >> 1,
 557                 .demod_addr   = 0x1e >> 1,
 558                 .type         = TM6010,
 559                 .caps = {
 560                         .has_tuner      = 1,
 561                         .has_dvb        = 1,
 562                         .has_zl10353    = 1,
 563                         .has_eeprom     = 1,
 564                         .has_remote     = 0,
 565                         .has_radio      = 1,
 566                 },
 567                 .gpio = {
 568                         .tuner_reset    = TM6010_GPIO_0,
 569                         .demod_reset    = TM6010_GPIO_1,
 570                         .power_led      = TM6010_GPIO_6,
 571                 },
 572                 .vinput = { {
 573                         .type   = TM6000_INPUT_TV,
 574                         .vmux   = TM6000_VMUX_VIDEO_B,
 575                         .amux   = TM6000_AMUX_SIF1,
 576                         },
 577                 },
 578                 .rinput = {
 579                         .type   = TM6000_INPUT_RADIO,
 580                         .amux   = TM6000_AMUX_ADC1,
 581                 },
 582         },
 583         [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
 584                 .name         = "Beholder Voyager Lite TV/FM USB2.0",
 585                 .tuner_type   = TUNER_XC5000,
 586                 .tuner_addr   = 0xc2 >> 1,
 587                 .type         = TM6010,
 588                 .caps = {
 589                         .has_tuner      = 1,
 590                         .has_dvb        = 0,
 591                         .has_zl10353    = 0,
 592                         .has_eeprom     = 1,
 593                         .has_remote     = 0,
 594                         .has_radio      = 1,
 595                 },
 596                 .gpio = {
 597                         .tuner_reset    = TM6010_GPIO_0,
 598                         .power_led      = TM6010_GPIO_6,
 599                 },
 600                 .vinput = { {
 601                         .type   = TM6000_INPUT_TV,
 602                         .vmux   = TM6000_VMUX_VIDEO_B,
 603                         .amux   = TM6000_AMUX_SIF1,
 604                         },
 605                 },
 606                 .rinput = {
 607                         .type   = TM6000_INPUT_RADIO,
 608                         .amux   = TM6000_AMUX_ADC1,
 609                 },
 610         },
 611 };
 612
 613 /* table of devices that work with this driver */
 614 static struct usb_device_id tm6000_id_table[] = {
 615         { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
 616         { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
 617         { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
 618         { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
 619         { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
 620         { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 621         { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 622         { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 623         { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 624         { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
 625         { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
 626         { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 627         { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 628         { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
 629         { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 630         { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 631         { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 632         { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 633         { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
 634         { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
 635         { }
 636 };
 637
 638 /* Control power led for show some activity */
 639 void tm6000_flash_led(struct tm6000_core *dev, u8 state)
 640 {
 641         /* Power LED unconfigured */
 642         if (!dev->gpio.power_led)
 643                 return;
 644
 645         /* ON Power LED */
 646         if (state) {
 647                 switch (dev->model) {
 648                 case TM6010_BOARD_HAUPPAUGE_900H:
 649                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 650                 case TM6010_BOARD_TWINHAN_TU501:
 651                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 652                                 dev->gpio.power_led, 0x00);
 653                         break;
 654                 case TM6010_BOARD_BEHOLD_WANDER:
 655                 case TM6010_BOARD_BEHOLD_VOYAGER:
 656                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
 657                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 658                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 659                                 dev->gpio.power_led, 0x01);
 660                         break;
 661                 }
 662         }
 663         /* OFF Power LED */
 664         else {
 665                 switch (dev->model) {
 666                 case TM6010_BOARD_HAUPPAUGE_900H:
 667                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 668                 case TM6010_BOARD_TWINHAN_TU501:
 669                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 670                                 dev->gpio.power_led, 0x01);
 671                         break;
 672                 case TM6010_BOARD_BEHOLD_WANDER:
 673                 case TM6010_BOARD_BEHOLD_VOYAGER:
 674                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
 675                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 676                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 677                                 dev->gpio.power_led, 0x00);
 678                         break;
 679                 }
 680         }
 681 }
 682
 683 /* Tuner callback to provide the proper gpio changes needed for xc5000 */
 684 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
 685 {
 686         int rc = 0;
 687         struct tm6000_core *dev = ptr;
 688
 689         if (dev->tuner_type != TUNER_XC5000)
 690                 return 0;
 691
 692         switch (command) {
 693         case XC5000_TUNER_RESET:
 694                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 695                                dev->gpio.tuner_reset, 0x01);
 696                 msleep(15);
 697                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 698                                dev->gpio.tuner_reset, 0x00);
 699                 msleep(15);
 700                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 701                                dev->gpio.tuner_reset, 0x01);
 702                 break;
 703         }
 704         return rc;
 705 }
 706 EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
 707
 708 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 709
 710 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 711 {
 712         int rc = 0;
 713         struct tm6000_core *dev = ptr;
 714
 715         if (dev->tuner_type != TUNER_XC2028)
 716                 return 0;
 717
 718         switch (command) {
 719         case XC2028_RESET_CLK:
 720                 tm6000_ir_wait(dev, 0);
 721
 722                 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 723                                         0x02, arg);
 724                 msleep(10);
 725                 rc = tm6000_i2c_reset(dev, 10);
 726                 break;
 727         case XC2028_TUNER_RESET:
 728                 /* Reset codes during load firmware */
 729                 switch (arg) {
 730                 case 0:
 731                         /* newer tuner can faster reset */
 732                         switch (dev->model) {
 733                         case TM5600_BOARD_10MOONS_UT821:
 734                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 735                                                dev->gpio.tuner_reset, 0x01);
 736                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 737                                                0x300, 0x01);
 738                                 msleep(10);
 739                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 740                                                dev->gpio.tuner_reset, 0x00);
 741                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 742                                                0x300, 0x00);
 743                                 msleep(10);
 744                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 745                                                dev->gpio.tuner_reset, 0x01);
 746                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 747                                                0x300, 0x01);
 748                                 break;
 749                         case TM6010_BOARD_HAUPPAUGE_900H:
 750                         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 751                         case TM6010_BOARD_TWINHAN_TU501:
 752                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 753                                                dev->gpio.tuner_reset, 0x01);
 754                                 msleep(60);
 755                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 756                                                dev->gpio.tuner_reset, 0x00);
 757                                 msleep(75);
 758                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 759                                                dev->gpio.tuner_reset, 0x01);
 760                                 msleep(60);
 761                                 break;
 762                         default:
 763                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 764                                                dev->gpio.tuner_reset, 0x00);
 765                                 msleep(130);
 766                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 767                                                dev->gpio.tuner_reset, 0x01);
 768                                 msleep(130);
 769                                 break;
 770                         }
 771
 772                         tm6000_ir_wait(dev, 1);
 773                         break;
 774                 case 1:
 775                         tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 776                                                 0x02, 0x01);
 777                         msleep(10);
 778                         break;
 779                 case 2:
 780                         rc = tm6000_i2c_reset(dev, 100);
 781                         break;
 782                 }
 783         }
 784         return rc;
 785 }
 786 EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
 787
 788 int tm6000_cards_setup(struct tm6000_core *dev)
 789 {
 790         /*
 791          * Board-specific initialization sequence. Handles all GPIO
 792          * initialization sequences that are board-specific.
 793          * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
 794          * Probably, they're all based on some reference device. Due to that,
 795          * there's a common routine at the end to handle those GPIO's. Devices
 796          * that use different pinups or init sequences can just return at
 797          * the board-specific session.
 798          */
 799         switch (dev->model) {
 800         case TM6010_BOARD_HAUPPAUGE_900H:
 801         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 802         case TM6010_BOARD_TWINHAN_TU501:
 803         case TM6010_BOARD_GENERIC:
 804                 /* Turn xceive 3028 on */
 805                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
 806                 msleep(15);
 807                 /* Turn zarlink zl10353 on */
 808                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 809                 msleep(15);
 810                 /* Reset zarlink zl10353 */
 811                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 812                 msleep(50);
 813                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 814                 msleep(15);
 815                 /* Turn zarlink zl10353 off */
 816                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
 817                 msleep(15);
 818                 /* ir ? */
 819                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
 820                 msleep(15);
 821                 /* Power led on (blue) */
 822                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
 823                 msleep(15);
 824                 /* DVB led off (orange) */
 825                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
 826                 msleep(15);
 827                 /* Turn zarlink zl10353 on */
 828                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 829                 msleep(15);
 830                 break;
 831         case TM6010_BOARD_BEHOLD_WANDER:
 832         case TM6010_BOARD_BEHOLD_WANDER_LITE:
 833                 /* Power led on (blue) */
 834                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 835                 msleep(15);
 836                 /* Reset zarlink zl10353 */
 837                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 838                 msleep(50);
 839                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 840                 msleep(15);
 841                 break;
 842         case TM6010_BOARD_BEHOLD_VOYAGER:
 843         case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 844                 /* Power led on (blue) */
 845                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 846                 msleep(15);
 847                 break;
 848         default:
 849                 break;
 850         }
 851
 852         /*
 853          * Default initialization. Most of the devices seem to use GPIO1
 854          * and GPIO4.on the same way, so, this handles the common sequence
 855          * used by most devices.
 856          * If a device uses a different sequence or different GPIO pins for
 857          * reset, just add the code at the board-specific part
 858          */
 859
 860         if (dev->gpio.tuner_reset) {
 861                 int rc;
 862                 int i;
 863
 864                 for (i = 0; i < 2; i++) {
 865                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 866                                                 dev->gpio.tuner_reset, 0x00);
 867                         if (rc < 0) {
 868                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 869                                 return rc;
 870                         }
 871
 872                         msleep(10); /* Just to be conservative */
 873                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 874                                                 dev->gpio.tuner_reset, 0x01);
 875                         if (rc < 0) {
 876                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 877                                 return rc;
 878                         }
 879                 }
 880         } else {
 881                 printk(KERN_ERR "Tuner reset is not configured\n");
 882                 return -1;
 883         }
 884
 885         msleep(50);
 886
 887         return 0;
 888 };
 889
 890 static void tm6000_config_tuner(struct tm6000_core *dev)
 891 {
 892         struct tuner_setup tun_setup;
 893
 894         /* Load tuner module */
 895         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 896                 "tuner", dev->tuner_addr, NULL);
 897
 898         memset(&tun_setup, 0, sizeof(tun_setup));
 899         tun_setup.type = dev->tuner_type;
 900         tun_setup.addr = dev->tuner_addr;
 901
 902         tun_setup.mode_mask = 0;
 903         if (dev->caps.has_tuner)
 904                 tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
 905
 906         switch (dev->tuner_type) {
 907         case TUNER_XC2028:
 908                 tun_setup.tuner_callback = tm6000_tuner_callback;
 909                 break;
 910         case TUNER_XC5000:
 911                 tun_setup.tuner_callback = tm6000_xc5000_callback;
 912                 break;
 913         }
 914
 915         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 916
 917         switch (dev->tuner_type) {
 918         case TUNER_XC2028: {
 919                 struct v4l2_priv_tun_config xc2028_cfg;
 920                 struct xc2028_ctrl ctl;
 921
 922                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
 923                 memset(&ctl, 0, sizeof(ctl));
 924
 925                 ctl.demod = XC3028_FE_ZARLINK456;
 926
 927                 xc2028_cfg.tuner = TUNER_XC2028;
 928                 xc2028_cfg.priv  = &ctl;
 929
 930                 switch (dev->model) {
 931                 case TM6010_BOARD_HAUPPAUGE_900H:
 932                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 933                 case TM6010_BOARD_TWINHAN_TU501:
 934                         ctl.fname = "xc3028L-v36.fw";
 935                         break;
 936                 default:
 937                         if (dev->dev_type == TM6010)
 938                                 ctl.fname = "xc3028-v27.fw";
 939                         else
 940                                 ctl.fname = "xc3028-v24.fw";
 941                 }
 942
 943                 printk(KERN_INFO "Setting firmware parameters for xc2028\n");
 944                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 945                                      &xc2028_cfg);
 946
 947                 }
 948                 break;
 949         case TUNER_XC5000:
 950                 {
 951                 struct v4l2_priv_tun_config  xc5000_cfg;
 952                 struct xc5000_config ctl = {
 953                         .i2c_address = dev->tuner_addr,
 954                         .if_khz      = 4570,
 955                         .radio_input = XC5000_RADIO_FM1_MONO,
 956                         };
 957
 958                 xc5000_cfg.tuner = TUNER_XC5000;
 959                 xc5000_cfg.priv  = &ctl;
 960
 961                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 962                                      &xc5000_cfg);
 963                 }
 964                 break;
 965         default:
 966                 printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
 967                 break;
 968         }
 969 }
 970
 971 static int fill_board_specific_data(struct tm6000_core *dev)
 972 {
 973         int rc;
 974
 975         dev->dev_type   = tm6000_boards[dev->model].type;
 976         dev->tuner_type = tm6000_boards[dev->model].tuner_type;
 977         dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
 978
 979         dev->gpio = tm6000_boards[dev->model].gpio;
 980
 981         dev->ir_codes = tm6000_boards[dev->model].ir_codes;
 982
 983         dev->demod_addr = tm6000_boards[dev->model].demod_addr;
 984
 985         dev->caps = tm6000_boards[dev->model].caps;
 986
 987         dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
 988         dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
 989         dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
 990         dev->rinput = tm6000_boards[dev->model].rinput;
 991
 992         /* initialize hardware */
 993         rc = tm6000_init(dev);
 994         if (rc < 0)
 995                 return rc;
 996
 997         return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
 998 }
 999
1000
1001 static void use_alternative_detection_method(struct tm6000_core *dev)
1002 {
1003         int i, model = -1;
1004
1005         if (!dev->eedata_size)
1006                 return;
1007
1008         for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
1009                 if (!tm6000_boards[i].eename_size)
1010                         continue;
1011                 if (dev->eedata_size < tm6000_boards[i].eename_pos +
1012                                        tm6000_boards[i].eename_size)
1013                         continue;
1014
1015                 if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
1016                             tm6000_boards[i].eename,
1017                             tm6000_boards[i].eename_size)) {
1018                         model = i;
1019                         break;
1020                 }
1021         }
1022         if (model < 0) {
1023                 printk(KERN_INFO "Device has eeprom but is currently unknown\n");
1024                 return;
1025         }
1026
1027         dev->model = model;
1028
1029         printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
1030                tm6000_boards[model].name, model);
1031 }
1032
1033 static int tm6000_init_dev(struct tm6000_core *dev)
1034 {
1035         struct v4l2_frequency f;
1036         int rc = 0;
1037
1038         mutex_init(&dev->lock);
1039         mutex_lock(&dev->lock);
1040
1041         if (!is_generic(dev->model)) {
1042                 rc = fill_board_specific_data(dev);
1043                 if (rc < 0)
1044                         goto err;
1045
1046                 /* register i2c bus */
1047                 rc = tm6000_i2c_register(dev);
1048                 if (rc < 0)
1049                         goto err;
1050         } else {
1051                 /* register i2c bus */
1052                 rc = tm6000_i2c_register(dev);
1053                 if (rc < 0)
1054                         goto err;
1055
1056                 use_alternative_detection_method(dev);
1057
1058                 rc = fill_board_specific_data(dev);
1059                 if (rc < 0)
1060                         goto err;
1061         }
1062
1063         /* Default values for STD and resolutions */
1064         dev->width = 720;
1065         dev->height = 480;
1066         dev->norm = V4L2_STD_PAL_M;
1067
1068         /* Configure tuner */
1069         tm6000_config_tuner(dev);
1070
1071         /* Set video standard */
1072         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
1073
1074         /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
1075         f.tuner = 0;
1076         f.type = V4L2_TUNER_ANALOG_TV;
1077         f.frequency = 3092;     /* 193.25 MHz */
1078         dev->freq = f.frequency;
1079         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1080
1081         if (dev->caps.has_tda9874)
1082                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1083                         "tvaudio", I2C_ADDR_TDA9874, NULL);
1084
1085         /* register and initialize V4L2 */
1086         rc = tm6000_v4l2_register(dev);
1087         if (rc < 0)
1088                 goto err;
1089
1090         tm6000_add_into_devlist(dev);
1091         tm6000_init_extension(dev);
1092
1093         tm6000_ir_init(dev);
1094
1095         mutex_unlock(&dev->lock);
1096         return 0;
1097
1098 err:
1099         mutex_unlock(&dev->lock);
1100         return rc;
1101 }
1102
1103 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
1104 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
1105
1106 static void get_max_endpoint(struct usb_device *udev,
1107                              struct usb_host_interface *alt,
1108                              char *msgtype,
1109                              struct usb_host_endpoint *curr_e,
1110                              struct tm6000_endpoint *tm_ep)
1111 {
1112         u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
1113         unsigned int size = tmp & 0x7ff;
1114
1115         if (udev->speed == USB_SPEED_HIGH)
1116                 size = size * hb_mult(tmp);
1117
1118         if (size > tm_ep->maxsize) {
1119                 tm_ep->endp = curr_e;
1120                 tm_ep->maxsize = size;
1121                 tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
1122                 tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
1123
1124                 printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
1125                                         msgtype, curr_e->desc.bEndpointAddress,
1126                                         size);
1127         }
1128 }
1129
1130 /*
1131  * tm6000_usb_probe()
1132  * checks for supported devices
1133  */
1134 static int tm6000_usb_probe(struct usb_interface *interface,
1135                             const struct usb_device_id *id)
1136 {
1137         struct usb_device *usbdev;
1138         struct tm6000_core *dev = NULL;
1139         int i, rc = 0;
1140         int nr = 0;
1141         char *speed;
1142
1143         usbdev = usb_get_dev(interface_to_usbdev(interface));
1144
1145         /* Selects the proper interface */
1146         rc = usb_set_interface(usbdev, 0, 1);
1147         if (rc < 0)
1148                 goto err;
1149
1150         /* Check to see next free device and mark as used */
1151         nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
1152         if (nr >= TM6000_MAXBOARDS) {
1153                 printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
1154                 usb_put_dev(usbdev);
1155                 return -ENOMEM;
1156         }
1157
1158         /* Create and initialize dev struct */
1159         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1160         if (dev == NULL) {
1161                 printk(KERN_ERR "tm6000" ": out of memory!\n");
1162                 usb_put_dev(usbdev);
1163                 return -ENOMEM;
1164         }
1165         spin_lock_init(&dev->slock);
1166
1167         /* Increment usage count */
1168         tm6000_devused |= 1<<nr;
1169         snprintf(dev->name, 29, "tm6000 #%d", nr);
1170
1171         dev->model = id->driver_info;
1172         if (card[nr] < ARRAY_SIZE(tm6000_boards))
1173                 dev->model = card[nr];
1174
1175         dev->udev = usbdev;
1176         dev->devno = nr;
1177
1178         switch (usbdev->speed) {
1179         case USB_SPEED_LOW:
1180                 speed = "1.5";
1181                 break;
1182         case USB_SPEED_UNKNOWN:
1183         case USB_SPEED_FULL:
1184                 speed = "12";
1185                 break;
1186         case USB_SPEED_HIGH:
1187                 speed = "480";
1188                 break;
1189         default:
1190                 speed = "unknown";
1191         }
1192
1193         /* Get endpoints */
1194         for (i = 0; i < interface->num_altsetting; i++) {
1195                 int ep;
1196
1197                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
1198                         struct usb_host_endpoint        *e;
1199                         int dir_out;
1200
1201                         e = &interface->altsetting[i].endpoint[ep];
1202
1203                         dir_out = ((e->desc.bEndpointAddress &
1204                                         USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
1205
1206                         printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
1207                                i,
1208                                interface->altsetting[i].desc.bInterfaceNumber,
1209                                interface->altsetting[i].desc.bInterfaceClass);
1210
1211                         switch (e->desc.bmAttributes) {
1212                         case USB_ENDPOINT_XFER_BULK:
1213                                 if (!dir_out) {
1214                                         get_max_endpoint(usbdev,
1215                                                          &interface->altsetting[i],
1216                                                          "Bulk IN", e,
1217                                                          &dev->bulk_in);
1218                                 } else {
1219                                         get_max_endpoint(usbdev,
1220                                                          &interface->altsetting[i],
1221                                                          "Bulk OUT", e,
1222                                                          &dev->bulk_out);
1223                                 }
1224                                 break;
1225                         case USB_ENDPOINT_XFER_ISOC:
1226                                 if (!dir_out) {
1227                                         get_max_endpoint(usbdev,
1228                                                          &interface->altsetting[i],
1229                                                          "ISOC IN", e,
1230                                                          &dev->isoc_in);
1231                                 } else {
1232                                         get_max_endpoint(usbdev,
1233                                                          &interface->altsetting[i],
1234                                                          "ISOC OUT", e,
1235                                                          &dev->isoc_out);
1236                                 }
1237                                 break;
1238                         case USB_ENDPOINT_XFER_INT:
1239                                 if (!dir_out) {
1240                                         get_max_endpoint(usbdev,
1241                                                         &interface->altsetting[i],
1242                                                         "INT IN", e,
1243                                                         &dev->int_in);
1244                                 } else {
1245                                         get_max_endpoint(usbdev,
1246                                                         &interface->altsetting[i],
1247                                                         "INT OUT", e,
1248                                                         &dev->int_out);
1249                                 }
1250                                 break;
1251                         }
1252                 }
1253         }
1254
1255
1256         printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
1257                 speed,
1258                 le16_to_cpu(dev->udev->descriptor.idVendor),
1259                 le16_to_cpu(dev->udev->descriptor.idProduct),
1260                 interface->altsetting->desc.bInterfaceNumber);
1261
1262 /* check if the the device has the iso in endpoint at the correct place */
1263         if (!dev->isoc_in.endp) {
1264                 printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
1265                 rc = -ENODEV;
1266
1267                 goto err;
1268         }
1269
1270         /* save our data pointer in this interface device */
1271         usb_set_intfdata(interface, dev);
1272
1273         printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
1274
1275         rc = tm6000_init_dev(dev);
1276         if (rc < 0)
1277                 goto err;
1278
1279         return 0;
1280
1281 err:
1282         printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
1283
1284         tm6000_devused &= ~(1<<nr);
1285         usb_put_dev(usbdev);
1286
1287         kfree(dev);
1288         return rc;
1289 }
1290
1291 /*
1292  * tm6000_usb_disconnect()
1293  * called when the device gets diconencted
1294  * video device will be unregistered on v4l2_close in case it is still open
1295  */
1296 static void tm6000_usb_disconnect(struct usb_interface *interface)
1297 {
1298         struct tm6000_core *dev = usb_get_intfdata(interface);
1299         usb_set_intfdata(interface, NULL);
1300
1301         if (!dev)
1302                 return;
1303
1304         printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
1305
1306         tm6000_ir_fini(dev);
1307
1308         if (dev->gpio.power_led) {
1309                 switch (dev->model) {
1310                 case TM6010_BOARD_HAUPPAUGE_900H:
1311                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
1312                 case TM6010_BOARD_TWINHAN_TU501:
1313                         /* Power led off */
1314                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1315                                 dev->gpio.power_led, 0x01);
1316                         msleep(15);
1317                         break;
1318                 case TM6010_BOARD_BEHOLD_WANDER:
1319                 case TM6010_BOARD_BEHOLD_VOYAGER:
1320                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
1321                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
1322                         /* Power led off */
1323                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1324                                 dev->gpio.power_led, 0x00);
1325                         msleep(15);
1326                         break;
1327                 }
1328         }
1329         tm6000_v4l2_unregister(dev);
1330
1331         tm6000_i2c_unregister(dev);
1332
1333         v4l2_device_unregister(&dev->v4l2_dev);
1334
1335         dev->state |= DEV_DISCONNECTED;
1336
1337         usb_put_dev(dev->udev);
1338
1339         tm6000_close_extension(dev);
1340         tm6000_remove_from_devlist(dev);
1341
1342         kfree(dev);
1343 }
1344
1345 static struct usb_driver tm6000_usb_driver = {
1346                 .name = "tm6000",
1347                 .probe = tm6000_usb_probe,
1348                 .disconnect = tm6000_usb_disconnect,
1349                 .id_table = tm6000_id_table,
1350 };
1351
1352 static int __init tm6000_module_init(void)
1353 {
1354         int result;
1355
1356         printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
1357                (TM6000_VERSION  >> 16) & 0xff,
1358                (TM6000_VERSION  >> 8) & 0xff, TM6000_VERSION  & 0xff);
1359
1360         /* register this driver with the USB subsystem */
1361         result = usb_register(&tm6000_usb_driver);
1362         if (result)
1363                 printk(KERN_ERR "tm6000"
1364                            " usb_register failed. Error number %d.\n", result);
1365
1366         return result;
1367 }
1368
1369 static void __exit tm6000_module_exit(void)
1370 {
1371         /* deregister at USB subsystem */
1372         usb_deregister(&tm6000_usb_driver);
1373 }
1374
1375 module_init(tm6000_module_init);
1376 module_exit(tm6000_module_exit);
1377
1378 MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
1379 MODULE_AUTHOR("Mauro Carvalho Chehab");
1380 MODULE_LICENSE("GPL");