arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25                 serial0 = &auart0;
  26                 serial1 = &auart1;
  27                 serial2 = &auart2;
  28                 serial3 = &auart3;
  29                 serial4 = &auart4;
  30                 ethernet0 = &mac0;
  31                 ethernet1 = &mac1;
  32         };
  33
  34         cpus {
  35                 cpu@0 {
  36                         compatible = "arm,arm926ejs";
  37                 };
  38         };
  39
  40         apb@80000000 {
  41                 compatible = "simple-bus";
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 reg = <0x80000000 0x80000>;
  45                 ranges;
  46
  47                 apbh@80000000 {
  48                         compatible = "simple-bus";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         reg = <0x80000000 0x3c900>;
  52                         ranges;
  53
  54                         icoll: interrupt-controller@80000000 {
  55                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  56                                 interrupt-controller;
  57                                 #interrupt-cells = <1>;
  58                                 reg = <0x80000000 0x2000>;
  59                         };
  60
  61                         hsadc@80002000 {
  62                                 reg = <0x80002000 0x2000>;
  63                                 interrupts = <13 87>;
  64                                 status = "disabled";
  65                         };
  66
  67                         dma-apbh@80004000 {
  68                                 compatible = "fsl,imx28-dma-apbh";
  69                                 reg = <0x80004000 0x2000>;
  70                                 clocks = <&clks 25>;
  71                         };
  72
  73                         perfmon@80006000 {
  74                                 reg = <0x80006000 0x800>;
  75                                 interrupts = <27>;
  76                                 status = "disabled";
  77                         };
  78
  79                         gpmi-nand@8000c000 {
  80                                 compatible = "fsl,imx28-gpmi-nand";
  81                                 #address-cells = <1>;
  82                                 #size-cells = <1>;
  83                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  84                                 reg-names = "gpmi-nand", "bch";
  85                                 interrupts = <88>, <41>;
  86                                 interrupt-names = "gpmi-dma", "bch";
  87                                 clocks = <&clks 50>;
  88                                 fsl,gpmi-dma-channel = <4>;
  89                                 status = "disabled";
  90                         };
  91
  92                         ssp0: ssp@80010000 {
  93                                 #address-cells = <1>;
  94                                 #size-cells = <0>;
  95                                 reg = <0x80010000 0x2000>;
  96                                 interrupts = <96 82>;
  97                                 clocks = <&clks 46>;
  98                                 fsl,ssp-dma-channel = <0>;
  99                                 status = "disabled";
 100                         };
 101
 102                         ssp1: ssp@80012000 {
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 reg = <0x80012000 0x2000>;
 106                                 interrupts = <97 83>;
 107                                 clocks = <&clks 47>;
 108                                 fsl,ssp-dma-channel = <1>;
 109                                 status = "disabled";
 110                         };
 111
 112                         ssp2: ssp@80014000 {
 113                                 #address-cells = <1>;
 114                                 #size-cells = <0>;
 115                                 reg = <0x80014000 0x2000>;
 116                                 interrupts = <98 84>;
 117                                 clocks = <&clks 48>;
 118                                 fsl,ssp-dma-channel = <2>;
 119                                 status = "disabled";
 120                         };
 121
 122                         ssp3: ssp@80016000 {
 123                                 #address-cells = <1>;
 124                                 #size-cells = <0>;
 125                                 reg = <0x80016000 0x2000>;
 126                                 interrupts = <99 85>;
 127                                 clocks = <&clks 49>;
 128                                 fsl,ssp-dma-channel = <3>;
 129                                 status = "disabled";
 130                         };
 131
 132                         pinctrl@80018000 {
 133                                 #address-cells = <1>;
 134                                 #size-cells = <0>;
 135                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 136                                 reg = <0x80018000 0x2000>;
 137
 138                                 gpio0: gpio@0 {
 139                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 140                                         interrupts = <127>;
 141                                         gpio-controller;
 142                                         #gpio-cells = <2>;
 143                                         interrupt-controller;
 144                                         #interrupt-cells = <2>;
 145                                 };
 146
 147                                 gpio1: gpio@1 {
 148                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 149                                         interrupts = <126>;
 150                                         gpio-controller;
 151                                         #gpio-cells = <2>;
 152                                         interrupt-controller;
 153                                         #interrupt-cells = <2>;
 154                                 };
 155
 156                                 gpio2: gpio@2 {
 157                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 158                                         interrupts = <125>;
 159                                         gpio-controller;
 160                                         #gpio-cells = <2>;
 161                                         interrupt-controller;
 162                                         #interrupt-cells = <2>;
 163                                 };
 164
 165                                 gpio3: gpio@3 {
 166                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 167                                         interrupts = <124>;
 168                                         gpio-controller;
 169                                         #gpio-cells = <2>;
 170                                         interrupt-controller;
 171                                         #interrupt-cells = <2>;
 172                                 };
 173
 174                                 gpio4: gpio@4 {
 175                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 176                                         interrupts = <123>;
 177                                         gpio-controller;
 178                                         #gpio-cells = <2>;
 179                                         interrupt-controller;
 180                                         #interrupt-cells = <2>;
 181                                 };
 182
 183                                 duart_pins_a: duart@0 {
 184                                         reg = <0>;
 185                                         fsl,pinmux-ids = <
 186                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 187                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 188                                         >;
 189                                         fsl,drive-strength = <0>;
 190                                         fsl,voltage = <1>;
 191                                         fsl,pull-up = <0>;
 192                                 };
 193
 194                                 duart_pins_b: duart@1 {
 195                                         reg = <1>;
 196                                         fsl,pinmux-ids = <
 197                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 198                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 199                                         >;
 200                                         fsl,drive-strength = <0>;
 201                                         fsl,voltage = <1>;
 202                                         fsl,pull-up = <0>;
 203                                 };
 204
 205                                 duart_4pins_a: duart-4pins@0 {
 206                                         reg = <0>;
 207                                         fsl,pinmux-ids = <
 208                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 209                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 210                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 211                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 212                                         >;
 213                                         fsl,drive-strength = <0>;
 214                                         fsl,voltage = <1>;
 215                                         fsl,pull-up = <0>;
 216                                 };
 217
 218                                 gpmi_pins_a: gpmi-nand@0 {
 219                                         reg = <0>;
 220                                         fsl,pinmux-ids = <
 221                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 222                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 223                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 224                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 225                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 226                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 227                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 228                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 229                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 230                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 231                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 232                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 233                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 234                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 235                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 236                                         >;
 237                                         fsl,drive-strength = <0>;
 238                                         fsl,voltage = <1>;
 239                                         fsl,pull-up = <0>;
 240                                 };
 241
 242                                 gpmi_status_cfg: gpmi-status-cfg {
 243                                         fsl,pinmux-ids = <
 244                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 245                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 246                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 247                                         >;
 248                                         fsl,drive-strength = <2>;
 249                                 };
 250
 251                                 auart0_pins_a: auart0@0 {
 252                                         reg = <0>;
 253                                         fsl,pinmux-ids = <
 254                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 255                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 256                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 257                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 258                                         >;
 259                                         fsl,drive-strength = <0>;
 260                                         fsl,voltage = <1>;
 261                                         fsl,pull-up = <0>;
 262                                 };
 263
 264                                 auart0_2pins_a: auart0-2pins@0 {
 265                                         reg = <0>;
 266                                         fsl,pinmux-ids = <
 267                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 268                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 269                                         >;
 270                                         fsl,drive-strength = <0>;
 271                                         fsl,voltage = <1>;
 272                                         fsl,pull-up = <0>;
 273                                 };
 274
 275                                 auart1_pins_a: auart1@0 {
 276                                         reg = <0>;
 277                                         fsl,pinmux-ids = <
 278                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 279                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 280                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 281                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 282                                         >;
 283                                         fsl,drive-strength = <0>;
 284                                         fsl,voltage = <1>;
 285                                         fsl,pull-up = <0>;
 286                                 };
 287
 288                                 auart1_2pins_a: auart1-2pins@0 {
 289                                         reg = <0>;
 290                                         fsl,pinmux-ids = <
 291                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 292                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 293                                         >;
 294                                         fsl,drive-strength = <0>;
 295                                         fsl,voltage = <1>;
 296                                         fsl,pull-up = <0>;
 297                                 };
 298
 299                                 auart2_2pins_a: auart2-2pins@0 {
 300                                         reg = <0>;
 301                                         fsl,pinmux-ids = <
 302                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 303                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 304                                         >;
 305                                         fsl,drive-strength = <0>;
 306                                         fsl,voltage = <1>;
 307                                         fsl,pull-up = <0>;
 308                                 };
 309
 310                                 auart3_pins_a: auart3@0 {
 311                                         reg = <0>;
 312                                         fsl,pinmux-ids = <
 313                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 314                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 315                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 316                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 317                                         >;
 318                                         fsl,drive-strength = <0>;
 319                                         fsl,voltage = <1>;
 320                                         fsl,pull-up = <0>;
 321                                 };
 322
 323                                 auart3_2pins_a: auart3-2pins@0 {
 324                                         reg = <0>;
 325                                         fsl,pinmux-ids = <
 326                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 327                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 328                                         >;
 329                                         fsl,drive-strength = <0>;
 330                                         fsl,voltage = <1>;
 331                                         fsl,pull-up = <0>;
 332                                 };
 333
 334                                 mac0_pins_a: mac0@0 {
 335                                         reg = <0>;
 336                                         fsl,pinmux-ids = <
 337                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 338                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 339                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 340                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 341                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 342                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 343                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 344                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 345                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 346                                         >;
 347                                         fsl,drive-strength = <1>;
 348                                         fsl,voltage = <1>;
 349                                         fsl,pull-up = <1>;
 350                                 };
 351
 352                                 mac1_pins_a: mac1@0 {
 353                                         reg = <0>;
 354                                         fsl,pinmux-ids = <
 355                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 356                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 357                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 358                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 359                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 360                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 361                                         >;
 362                                         fsl,drive-strength = <1>;
 363                                         fsl,voltage = <1>;
 364                                         fsl,pull-up = <1>;
 365                                 };
 366
 367                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 368                                         reg = <0>;
 369                                         fsl,pinmux-ids = <
 370                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 371                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 372                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 373                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 374                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 375                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 376                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 377                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 378                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 379                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 380                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 381                                         >;
 382                                         fsl,drive-strength = <1>;
 383                                         fsl,voltage = <1>;
 384                                         fsl,pull-up = <1>;
 385                                 };
 386
 387                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 388                                         reg = <0>;
 389                                         fsl,pinmux-ids = <
 390                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 391                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 392                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 393                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 394                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 395                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 396                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 397                                         >;
 398                                         fsl,drive-strength = <1>;
 399                                         fsl,voltage = <1>;
 400                                         fsl,pull-up = <1>;
 401                                 };
 402
 403                                 mmc0_cd_cfg: mmc0-cd-cfg {
 404                                         fsl,pinmux-ids = <
 405                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 406                                         >;
 407                                         fsl,pull-up = <0>;
 408                                 };
 409
 410                                 mmc0_sck_cfg: mmc0-sck-cfg {
 411                                         fsl,pinmux-ids = <
 412                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 413                                         >;
 414                                         fsl,drive-strength = <2>;
 415                                         fsl,pull-up = <0>;
 416                                 };
 417
 418                                 i2c0_pins_a: i2c0@0 {
 419                                         reg = <0>;
 420                                         fsl,pinmux-ids = <
 421                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 422                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 423                                         >;
 424                                         fsl,drive-strength = <1>;
 425                                         fsl,voltage = <1>;
 426                                         fsl,pull-up = <1>;
 427                                 };
 428
 429                                 i2c0_pins_b: i2c0@1 {
 430                                         reg = <1>;
 431                                         fsl,pinmux-ids = <
 432                                                 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
 433                                                 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
 434                                         >;
 435                                         fsl,drive-strength = <1>;
 436                                         fsl,voltage = <1>;
 437                                         fsl,pull-up = <1>;
 438                                 };
 439
 440                                 i2c1_pins_a: i2c1@0 {
 441                                         reg = <0>;
 442                                         fsl,pinmux-ids = <
 443                                                 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
 444                                                 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
 445                                         >;
 446                                         fsl,drive-strength = <1>;
 447                                         fsl,voltage = <1>;
 448                                         fsl,pull-up = <1>;
 449                                 };
 450
 451                                 saif0_pins_a: saif0@0 {
 452                                         reg = <0>;
 453                                         fsl,pinmux-ids = <
 454                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 455                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 456                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 457                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 458                                         >;
 459                                         fsl,drive-strength = <2>;
 460                                         fsl,voltage = <1>;
 461                                         fsl,pull-up = <1>;
 462                                 };
 463
 464                                 saif1_pins_a: saif1@0 {
 465                                         reg = <0>;
 466                                         fsl,pinmux-ids = <
 467                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 468                                         >;
 469                                         fsl,drive-strength = <2>;
 470                                         fsl,voltage = <1>;
 471                                         fsl,pull-up = <1>;
 472                                 };
 473
 474                                 pwm0_pins_a: pwm0@0 {
 475                                         reg = <0>;
 476                                         fsl,pinmux-ids = <
 477                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 478                                         >;
 479                                         fsl,drive-strength = <0>;
 480                                         fsl,voltage = <1>;
 481                                         fsl,pull-up = <0>;
 482                                 };
 483
 484                                 pwm2_pins_a: pwm2@0 {
 485                                         reg = <0>;
 486                                         fsl,pinmux-ids = <
 487                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 488                                         >;
 489                                         fsl,drive-strength = <0>;
 490                                         fsl,voltage = <1>;
 491                                         fsl,pull-up = <0>;
 492                                 };
 493
 494                                 pwm4_pins_a: pwm4@0 {
 495                                         reg = <0>;
 496                                         fsl,pinmux-ids = <
 497                                                 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
 498                                         >;
 499                                         fsl,drive-strength = <0>;
 500                                         fsl,voltage = <1>;
 501                                         fsl,pull-up = <0>;
 502                                 };
 503
 504                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 505                                         reg = <0>;
 506                                         fsl,pinmux-ids = <
 507                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 508                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 509                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 510                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 511                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 512                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 513                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 514                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 515                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 516                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 517                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 518                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 519                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 520                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 521                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 522                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 523                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 524                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 525                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 526                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 527                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 528                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 529                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 530                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 531                                         >;
 532                                         fsl,drive-strength = <0>;
 533                                         fsl,voltage = <1>;
 534                                         fsl,pull-up = <0>;
 535                                 };
 536
 537                                 can0_pins_a: can0@0 {
 538                                         reg = <0>;
 539                                         fsl,pinmux-ids = <
 540                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 541                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 542                                         >;
 543                                         fsl,drive-strength = <0>;
 544                                         fsl,voltage = <1>;
 545                                         fsl,pull-up = <0>;
 546                                 };
 547
 548                                 can1_pins_a: can1@0 {
 549                                         reg = <0>;
 550                                         fsl,pinmux-ids = <
 551                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 552                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 553                                         >;
 554                                         fsl,drive-strength = <0>;
 555                                         fsl,voltage = <1>;
 556                                         fsl,pull-up = <0>;
 557                                 };
 558
 559                                 spi2_pins_a: spi2@0 {
 560                                         reg = <0>;
 561                                         fsl,pinmux-ids = <
 562                                                 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
 563                                                 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
 564                                                 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
 565                                                 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
 566                                         >;
 567                                         fsl,drive-strength = <1>;
 568                                         fsl,voltage = <1>;
 569                                         fsl,pull-up = <1>;
 570                                 };
 571
 572                                 usbphy0_pins_a: usbphy0@0 {
 573                                         reg = <0>;
 574                                         fsl,pinmux-ids = <
 575                                                 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
 576                                         >;
 577                                         fsl,drive-strength = <2>;
 578                                         fsl,voltage = <1>;
 579                                         fsl,pull-up = <0>;
 580                                 };
 581
 582                                 usbphy0_pins_b: usbphy0@1 {
 583                                         reg = <1>;
 584                                         fsl,pinmux-ids = <
 585                                                 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
 586                                         >;
 587                                         fsl,drive-strength = <2>;
 588                                         fsl,voltage = <1>;
 589                                         fsl,pull-up = <0>;
 590                                 };
 591
 592                                 usbphy1_pins_a: usbphy1@0 {
 593                                         reg = <0>;
 594                                         fsl,pinmux-ids = <
 595                                                 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
 596                                         >;
 597                                         fsl,drive-strength = <2>;
 598                                         fsl,voltage = <1>;
 599                                         fsl,pull-up = <0>;
 600                                 };
 601                         };
 602
 603                         digctl@8001c000 {
 604                                 reg = <0x8001c000 0x2000>;
 605                                 interrupts = <89>;
 606                                 status = "disabled";
 607                         };
 608
 609                         etm@80022000 {
 610                                 reg = <0x80022000 0x2000>;
 611                                 status = "disabled";
 612                         };
 613
 614                         dma-apbx@80024000 {
 615                                 compatible = "fsl,imx28-dma-apbx";
 616                                 reg = <0x80024000 0x2000>;
 617                                 clocks = <&clks 26>;
 618                         };
 619
 620                         dcp@80028000 {
 621                                 reg = <0x80028000 0x2000>;
 622                                 interrupts = <52 53 54>;
 623                                 status = "disabled";
 624                         };
 625
 626                         pxp@8002a000 {
 627                                 reg = <0x8002a000 0x2000>;
 628                                 interrupts = <39>;
 629                                 status = "disabled";
 630                         };
 631
 632                         ocotp@8002c000 {
 633                                 reg = <0x8002c000 0x2000>;
 634                                 status = "disabled";
 635                         };
 636
 637                         axi-ahb@8002e000 {
 638                                 reg = <0x8002e000 0x2000>;
 639                                 status = "disabled";
 640                         };
 641
 642                         lcdif@80030000 {
 643                                 compatible = "fsl,imx28-lcdif";
 644                                 reg = <0x80030000 0x2000>;
 645                                 interrupts = <38 86>;
 646                                 clocks = <&clks 55>;
 647                                 status = "disabled";
 648                         };
 649
 650                         can0: can@80032000 {
 651                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 652                                 reg = <0x80032000 0x2000>;
 653                                 interrupts = <8>;
 654                                 clocks = <&clks 58>, <&clks 58>;
 655                                 clock-names = "ipg", "per";
 656                                 status = "disabled";
 657                         };
 658
 659                         can1: can@80034000 {
 660                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 661                                 reg = <0x80034000 0x2000>;
 662                                 interrupts = <9>;
 663                                 clocks = <&clks 59>, <&clks 59>;
 664                                 clock-names = "ipg", "per";
 665                                 status = "disabled";
 666                         };
 667
 668                         simdbg@8003c000 {
 669                                 reg = <0x8003c000 0x200>;
 670                                 status = "disabled";
 671                         };
 672
 673                         simgpmisel@8003c200 {
 674                                 reg = <0x8003c200 0x100>;
 675                                 status = "disabled";
 676                         };
 677
 678                         simsspsel@8003c300 {
 679                                 reg = <0x8003c300 0x100>;
 680                                 status = "disabled";
 681                         };
 682
 683                         simmemsel@8003c400 {
 684                                 reg = <0x8003c400 0x100>;
 685                                 status = "disabled";
 686                         };
 687
 688                         gpiomon@8003c500 {
 689                                 reg = <0x8003c500 0x100>;
 690                                 status = "disabled";
 691                         };
 692
 693                         simenet@8003c700 {
 694                                 reg = <0x8003c700 0x100>;
 695                                 status = "disabled";
 696                         };
 697
 698                         armjtag@8003c800 {
 699                                 reg = <0x8003c800 0x100>;
 700                                 status = "disabled";
 701                         };
 702                 };
 703
 704                 apbx@80040000 {
 705                         compatible = "simple-bus";
 706                         #address-cells = <1>;
 707                         #size-cells = <1>;
 708                         reg = <0x80040000 0x40000>;
 709                         ranges;
 710
 711                         clks: clkctrl@80040000 {
 712                                 compatible = "fsl,imx28-clkctrl";
 713                                 reg = <0x80040000 0x2000>;
 714                                 #clock-cells = <1>;
 715                         };
 716
 717                         saif0: saif@80042000 {
 718                                 compatible = "fsl,imx28-saif";
 719                                 reg = <0x80042000 0x2000>;
 720                                 interrupts = <59 80>;
 721                                 clocks = <&clks 53>;
 722                                 fsl,saif-dma-channel = <4>;
 723                                 status = "disabled";
 724                         };
 725
 726                         power@80044000 {
 727                                 reg = <0x80044000 0x2000>;
 728                                 status = "disabled";
 729                         };
 730
 731                         saif1: saif@80046000 {
 732                                 compatible = "fsl,imx28-saif";
 733                                 reg = <0x80046000 0x2000>;
 734                                 interrupts = <58 81>;
 735                                 clocks = <&clks 54>;
 736                                 fsl,saif-dma-channel = <5>;
 737                                 status = "disabled";
 738                         };
 739
 740                         lradc@80050000 {
 741                                 compatible = "fsl,imx28-lradc";
 742                                 reg = <0x80050000 0x2000>;
 743                                 interrupts = <10 14 15 16 17 18 19
 744                                                 20 21 22 23 24 25>;
 745                                 status = "disabled";
 746                         };
 747
 748                         spdif@80054000 {
 749                                 reg = <0x80054000 0x2000>;
 750                                 interrupts = <45 66>;
 751                                 status = "disabled";
 752                         };
 753
 754                         rtc@80056000 {
 755                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 756                                 reg = <0x80056000 0x2000>;
 757                                 interrupts = <29>;
 758                         };
 759
 760                         i2c0: i2c@80058000 {
 761                                 #address-cells = <1>;
 762                                 #size-cells = <0>;
 763                                 compatible = "fsl,imx28-i2c";
 764                                 reg = <0x80058000 0x2000>;
 765                                 interrupts = <111 68>;
 766                                 clock-frequency = <100000>;
 767                                 fsl,i2c-dma-channel = <6>;
 768                                 status = "disabled";
 769                         };
 770
 771                         i2c1: i2c@8005a000 {
 772                                 #address-cells = <1>;
 773                                 #size-cells = <0>;
 774                                 compatible = "fsl,imx28-i2c";
 775                                 reg = <0x8005a000 0x2000>;
 776                                 interrupts = <110 69>;
 777                                 clock-frequency = <100000>;
 778                                 fsl,i2c-dma-channel = <7>;
 779                                 status = "disabled";
 780                         };
 781
 782                         pwm: pwm@80064000 {
 783                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 784                                 reg = <0x80064000 0x2000>;
 785                                 clocks = <&clks 44>;
 786                                 #pwm-cells = <2>;
 787                                 fsl,pwm-number = <8>;
 788                                 status = "disabled";
 789                         };
 790
 791                         timrot@80068000 {
 792                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 793                                 reg = <0x80068000 0x2000>;
 794                                 interrupts = <48 49 50 51>;
 795                         };
 796
 797                         auart0: serial@8006a000 {
 798                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 799                                 reg = <0x8006a000 0x2000>;
 800                                 interrupts = <112 70 71>;
 801                                 clocks = <&clks 45>;
 802                                 status = "disabled";
 803                         };
 804
 805                         auart1: serial@8006c000 {
 806                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 807                                 reg = <0x8006c000 0x2000>;
 808                                 interrupts = <113 72 73>;
 809                                 clocks = <&clks 45>;
 810                                 status = "disabled";
 811                         };
 812
 813                         auart2: serial@8006e000 {
 814                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 815                                 reg = <0x8006e000 0x2000>;
 816                                 interrupts = <114 74 75>;
 817                                 clocks = <&clks 45>;
 818                                 status = "disabled";
 819                         };
 820
 821                         auart3: serial@80070000 {
 822                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 823                                 reg = <0x80070000 0x2000>;
 824                                 interrupts = <115 76 77>;
 825                                 clocks = <&clks 45>;
 826                                 status = "disabled";
 827                         };
 828
 829                         auart4: serial@80072000 {
 830                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 831                                 reg = <0x80072000 0x2000>;
 832                                 interrupts = <116 78 79>;
 833                                 clocks = <&clks 45>;
 834                                 status = "disabled";
 835                         };
 836
 837                         duart: serial@80074000 {
 838                                 compatible = "arm,pl011", "arm,primecell";
 839                                 reg = <0x80074000 0x1000>;
 840                                 interrupts = <47>;
 841                                 clocks = <&clks 45>, <&clks 26>;
 842                                 clock-names = "uart", "apb_pclk";
 843                                 status = "disabled";
 844                         };
 845
 846                         usbphy0: usbphy@8007c000 {
 847                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 848                                 reg = <0x8007c000 0x2000>;
 849                                 clocks = <&clks 62>;
 850                                 status = "disabled";
 851                         };
 852
 853                         usbphy1: usbphy@8007e000 {
 854                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 855                                 reg = <0x8007e000 0x2000>;
 856                                 clocks = <&clks 63>;
 857                                 status = "disabled";
 858                         };
 859                 };
 860         };
 861
 862         ahb@80080000 {
 863                 compatible = "simple-bus";
 864                 #address-cells = <1>;
 865                 #size-cells = <1>;
 866                 reg = <0x80080000 0x80000>;
 867                 ranges;
 868
 869                 usb0: usb@80080000 {
 870                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 871                         reg = <0x80080000 0x10000>;
 872                         interrupts = <93>;
 873                         clocks = <&clks 60>;
 874                         fsl,usbphy = <&usbphy0>;
 875                         status = "disabled";
 876                 };
 877
 878                 usb1: usb@80090000 {
 879                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 880                         reg = <0x80090000 0x10000>;
 881                         interrupts = <92>;
 882                         clocks = <&clks 61>;
 883                         fsl,usbphy = <&usbphy1>;
 884                         status = "disabled";
 885                 };
 886
 887                 dflpt@800c0000 {
 888                         reg = <0x800c0000 0x10000>;
 889                         status = "disabled";
 890                 };
 891
 892                 mac0: ethernet@800f0000 {
 893                         compatible = "fsl,imx28-fec";
 894                         reg = <0x800f0000 0x4000>;
 895                         interrupts = <101>;
 896                         clocks = <&clks 57>, <&clks 57>;
 897                         clock-names = "ipg", "ahb";
 898                         status = "disabled";
 899                 };
 900
 901                 mac1: ethernet@800f4000 {
 902                         compatible = "fsl,imx28-fec";
 903                         reg = <0x800f4000 0x4000>;
 904                         interrupts = <102>;
 905                         clocks = <&clks 57>, <&clks 57>;
 906                         clock-names = "ipg", "ahb";
 907                         status = "disabled";
 908                 };
 909
 910                 switch@800f8000 {
 911                         reg = <0x800f8000 0x8000>;
 912                         status = "disabled";
 913                 };
 914
 915         };
 916 };