+#include <system_def.h>\r
+#include "system.h"\r
+#include "app_def.h"\r
+#include <unistd.h>\r
+#include <fcntl.h>\r
+#include <stdio.h>\r
+#include <errno.h>\r
+#include <stdlib.h>\r
+#include <rtems/error.h>\r
+#include <rtems/monitor.h>\r
+#include <rtems/shell.h>\r
+\r
+#include <bsp/mscan.h>\r
+#include <bsp/mscan-base.h>\r
+\r
+\r
+#include "helpers.h"\r
+#include "gw.h"\r
+\r
+\r
+extern unsigned long int total_1, total_2, succ_1, succ_2, err_1, err_2;\r
+\r
+static rtems_device_major_number mscan_major;\r
+static rtems_driver_address_table mscan_driver_table=MSCAN_DRIVER_TABLE_ENTRY;\r
+\r
+\r
+int print_can_totals(int argc, char** argv){\r
+ printf("Total 1: %lu, Total 2: %lu\n", total_1, total_2);\r
+ printf("Success 1: %lu, Success 2: %lu\n", succ_1, succ_2);\r
+ printf("Errors 1: %lu, Errors 2: %lu\n", err_1, err_2);\r
+ return 0;\r
+}\r
+\r
+int print_regs(int argc, char** argv){\r
+ printf("IPB_CLOCK: %lu\n", bsp_uboot_board_info.bi_ipbfreq);\r
+ printf("XLB_CLOCK: %lu\n", bsp_uboot_board_info.bi_busfreq);\r
+ printf("G2_CLOCK: %lu\n", bsp_uboot_board_info.bi_intfreq);\r
+ printf("BAUD: %lu\n", bsp_uboot_board_info.bi_baudrate);\r
+ printf("BIT 27 set to 1: 0x%08lx\n", MPC5200_BIT32(27));\r
+ printf("GPIO_PCR_CHIP_ALTS_CAN: 0x%08x\n", GPIO_PCR_CHIP_ALTS_CAN); \r
+ printf("GPIO_PCR_CHIP_SELECT_1: 0x%08x\n", GPIO_PCR_CHIP_SELECT_1);\r
+ return 0;\r
+}\r
+\r
+\r
+\r
+/*\r
+* Single function to prepare CAN devices for read/write operation.\r
+*\r
+* Sets up baud rate at 1M, opens fda and fdb and checks for errors.\r
+*/\r
+static int init_CAN(){\r
+ rtems_status_code status;\r
+ \r
+ printf("Initializing CAN bus.\n");\r
+ \r
+ printf("Changing gpiopcr setting...\n"); \r
+ //Clear PCR_CHIP_SELECT bits and sets them to ALT_CAN.\r
+ mpc5200.gpiopcr = (mpc5200.gpiopcr & (~GPIO_PCR_CHIP_SELECT_1)) | GPIO_PCR_CHIP_ALTS_CAN;\r
+\r
+ printf("Registering CAN drivers...\n");\r
+ status = rtems_io_register_driver(0, &mscan_driver_table, &mscan_major);\r
+ if (status != RTEMS_SUCCESSFUL){\r
+ printf("caninit: rtems_io_register_driver %s\n",rtems_status_text(status));\r
+ return 1;\r
+ }\r
+ \r
+ return 0;\r
+}\r
+\r
+int start_can(int argc, char** argv){\r
+ int res;\r
+ static char inited = 0;\r
+ if (!inited){\r
+ res = init_CAN();\r
+ inited = 1;\r
+ if (res != 0){\r
+ //TODO\r
+ printf("Error while initializing CAN\n");\r
+ return res;\r
+ }\r
+ printf("CAN inited\n");\r
+ }\r
+ res = start_GW();\r
+ return 0;\r
+}\r
+\r
+int end_can(int argc, char** argv){\r
+ return end_GW();\r
+}
\ No newline at end of file