+#ifndef __NETWORKCONFIG_H__
+#define __NETWORKCONFIG_H__
+
+#include <rtems/rtems_bsdnet.h>
+#include <bsp.h>
+
+/* This was taken from existing example, driver failed to provide its own, so why not. */\r
+static char ethernet_address[6] = {0x00, 0x04, 0x9F, 0x00, 0x27, 0x50 };\r
+\r
+extern void rtems_bsdnet_loopattach();\r
+\r
+/* config for loopback device */\r
+static struct rtems_bsdnet_ifconfig loopback_config = {\r
+ "lo0",\r
+ rtems_bsdnet_loopattach,\r
+ NULL,\r
+ "127.0.0.1",\r
+ "255.0.0.0"\r
+ /* Rest of the struct is set to 0 (is defaulted) */\r
+};\r
+\r
+/* config for ethernet */\r
+static struct rtems_bsdnet_ifconfig netdriver_config = {\r
+ RTEMS_BSP_NETWORK_DRIVER_NAME,\r
+ RTEMS_BSP_NETWORK_DRIVER_ATTACH,\r
+ &loopback_config, /* link to next interface */\r
+ "192.168.2.3", /* IP address */\r
+ "255.255.255.0", /* IP address net mask */\r
+ ethernet_address /* ethernet hardware address, 0 - supplied by driver according to documentation, but it caused error when tested */\r
+ \r
+ /* rest of the struct is set to 0 (is defaulted) */\r
+};\r
+\r
+/* Main config. */
+struct rtems_bsdnet_config rtems_bsdnet_config = {
+ &netdriver_config, /* This entry points to the head of the ifconfig chain. */
+ NULL, /* rtems_bsdnet_do_bootp if it should use bootp, null otherwise */
+ /* From here on, zero means default value. */\r
+ 100, /* network task priority (default 100) */
+ 65792, /* mbuf bytecount (default 64kbytes) */\r
+ /* Using default sizes stops RTEMS from answering to pings. (Probably because it allocates too few buffer for an answer.). */
+ 263168, //180584, /* mbuf cluster bytecount (default 128kbytes) */
+ "midam_deska", /* hostname (default BOOTP) */
+ "testdomain", /* domain name (default BOOTP) */
+ "192.168.2.2", /* gateway (default BOOTP) */
+ "192.168.2.2", /* log_host (default BOOTP) */
+ { "192.168.2.2", }, /* name_server[3] (default BOOTP) */
+ { "192.168.2.2", }, /* ntp_server[3] (default BOOTP) */
+ 0, /* sb efficiency (default 2) */
+ 0, /* udp tx buf size (default 9216 bytes) */
+ 0, /* udp rx buf size (default 40 * (1024 + sizeof(struct sockaddr_in) bytes) */
+ 0, /* tcp tx buf size (default 16 * 1024 bytes) */
+ 0 /* tcp rx buf size (default 16 * 1024 bytes) */
+};
+
+#endif
+