set -e
+COUNT=10000
+
+OPT_TRAFFIC=oneatatime
+OPT_LOAD=none
+
+error() {
+ echo $1 >&2
+ exit 1
+}
+
while [ $# -gt 0 ]; do
case "$1" in
- -P) OPT_PLOT_DISABLE=1; shift;;
- -p) OPT_PLOT_ONLY=1; shift;;
+ -P|--no-plot) OPT_PLOT_DISABLE=1; shift;;
+ -p|--plot) OPT_PLOT_ONLY=1; shift;;
-X|--no-x11-plot) OPT_NO_X11=1; shift;;
+ -t) case "$2" in
+ all|flood|50|oneatatime) OPT_TRAFFIC=$2;;
+ *) error "Unknown traffic specification: $2";;
+ esac;
+ shift 2;;
+ -l) case "$2" in
+ all|none|cpu|eth|can) OPT_LOAD=$2;;
+ *) error "Unknown load specification: $2";;
+ esac;
+ shift 2;;
esac
done
PATH=$PWD/../_compiled/bin/:$PATH
-COUNT=10000
-
-error() {
- echo $1 >&2
- exit 1
-}
-
sshgw() {
local socket="$HOME/.ssh/cangw-connection"
- if [[ ! -S $socket ]]; then
- # Create master connection to speed up subsequenct command.
- # The ssh is put into background and the connection is closed
- # after 10 minutes)
- ssh -f -M -S $socket root@192.168.2.3 sleep 600 > /dev/null 2>&1
+ if [[ "$1" = "-f" ]]; then
+ shift
+ else
+ if [[ "$NO_GW_NEEDED" ]]; then return; fi
+ fi
+
+ if [[ ! -S $socket ]] || ! ssh -x -a -S $socket root@192.168.2.3 true; then
+ # Create master connection to speed up subsequenct command.
+ ssh -N -f -M -S $socket root@192.168.2.3 >/dev/null 2>&1
fi
ssh -x -a -S $socket root@192.168.2.3 "$@"
}
_plot() {
local testname=`basename $0 .sh`
-
- plot_cmds | sed -e "/set title/ s/[\"']\(.*\)[\"']/\"\1\\\\n($kvers)\"/" > plot.gp
- if [ -z "$OPT_NO_X11" ]; then
- echo "set terminal x11 enhanced; $(< plot.gp)" | gnuplot -persist
- fi
- I=''
- echo 'set terminal postscript color eps enhanced size 6cm,4cm lw 1 "Times-Roman" 10;' \
- 'set lmargin 8;' \
- "$(< plot.gp)" | gnuplot > ${testname}$I.eps
- echo "set terminal postscript color eps enhanced;" \
- "$(< plot.gp)" | gnuplot | epstopdf --filter > ${testname}$I.pdf
- mkdir -p thumb
- convert -density 30 -gamma 0.5 -quality 90 -type Palette -depth 8 ${testname}$I.pdf thumb/${testname}$I.png
- convert -density 150 -gamma 0.7 -quality 90 -type Palette -depth 8 ${testname}$I.pdf ${testname}$I.png
-
-}
-
-create_dirs_and_links() {
- local test=$1
- local kver=$2
-
- local d=results/by-kern/$kver/$test
- mkdir -p $d
- mkdir -p results/by-test/$test
- ln -sfT ../../${d#results/} results/by-test/$test/$kver
- echo $d
+ rm -rf *.pdf *.png
+ for i in "" $ADDITIONAL_PLOTS; do
+ plot_cmds $i | sed -e "/set title/ s/[\"']\(.*\)[\"']/\"\1\\\\n{\/*0.75 (GW kernel $kvers, Traffic $traffic, Load $load)}\"/" > plot.gp
+ if [[ ! -s plot.gp ]]; then continue; fi
+ if [ -z "$OPT_NO_X11" ]; then
+ echo "set terminal x11 enhanced; $(< plot.gp)" | gnuplot -persist
+ fi
+ test "$(gnuplot --version)" = "gnuplot 4.2 patchlevel 5 " && continue
+ echo "set terminal pdfcairo solid color enhanced; " \
+ "set output \"graph$i.pdf\";" \
+ "set pointsize 0.5;" \
+ "$(< plot.gp)" | gnuplot
+ echo 'set terminal pngcairo color enhanced size 750,525 font ",10" ;' \
+ "$(< plot.gp)" | gnuplot > graph$i.png
+ convert -resize 150x105 -gamma 0.5 -quality 90 -type Palette -depth 8 graph$i.png tgraph$i.png
+# echo 'set terminal pngcairo color enhanced size 150,105 font ",1";' \
+# "$(< plot.gp)" | gnuplot > thumb/${testname}$i.png
+ done
}
echo_plot() {
echo -n " " $plot
}
+traffic_and_length() {
+ local opts
+ case $traffic in
+ flood) opts='';;
+ 50) opts="-p $((2*(44+$1*8)))";;
+ oneatatime) opts="-o";;
+ *) error "Unknown traffic specification: $traffic"
+ esac
+ echo $opts -l $1
+}
+
+start_load() {
+ case $load in
+ none) ;;
+ cpu) sshgw 'hackbench -g 3 -l 100000' & loadpid=$!;;
+ eth) ping -f -s 60000 -q 192.168.2.3 & loadpid=$!;; # TODO: Generate eth load from another computer
+ can) latester -q -d can1 -i 0x7ff & loadpid=$!;;
+ *) error "Unknown load specification: $load"
+ esac
+}
+
+kill_load() {
+ case $load in
+ none) ;;
+ cpu) kill $loadpid; sshgw "killall -q hackbench || :";;
+ eth) kill $loadpid;;
+ can) kill $loadpid;;
+ *) error "Unknown load specification: $load"
+ esac
+}
+
+_measure() {
+ # Remove data from the last measurement
+ rm -rf *
+ # Kill load generators left possibly from the past runs
+ killall -q ping || :
+ killall -q latester || :
+ if [[ ! "$NO_GW_NEEDED" ]]; then
+ sshgw 'killall -q hackbench || :'
+ # Set can interfaces up
+ sshgw 'for i in 0 1; do ip link show dev can$i|grep -q UP || ip link set can$i up type can bitrate 1000000; done'
+ # Delete all vcan interfaces
+ sshgw 'for dev in $(ip l|grep -o vcan[^:]\\+); do ip link del dev $dev; done'
+ # Reset priorities
+ sshgw 'if pid=`pidof irq/145-can0`; then chrt -p -f 50 $pid > /dev/null; fi'
+ sshgw 'if pid=`pidof irq/146-can1`; then chrt -p -f 50 $pid > /dev/null; fi'
+ sshgw 'if pid=`pidof sirq-net-rx/0`; then chrt -p -f 49 $pid > /dev/null; fi'
+ sshgw 'if pid=`pidof sirq-net-tx/0`; then chrt -p -f 49 $pid > /dev/null; fi'
+ # Set the length of qdisc queue to avoid ENOBUFS errors
+ sshgw 'ifconfig can0 txqueuelen 1000; ifconfig can1 txqueuelen 1000'
+ ifconfig can0 txqueuelen 200
+ ifconfig can1 txqueuelen 200
+ cleanupgw
+
+ type prepare >/dev/null 2>&1 && prepare || :
+ start_load
+ fi
+
+ main
+
+ if [[ ! "$NO_GW_NEEDED" ]]; then
+ kill_load
+ fi
+
+ if [ ! "$SKIPPED" ]; then
+ # Create a plot script at the end to signalize that the
+ # measurement was successfully finished
+ cat > plot.sh <<-EOF
+ #!/bin/bash
+ export kvers=$kvers
+ export hostkvers=$hostkvers
+ export traffic=$traffic
+ export load=$load
+ cd \$(dirname \$0)/$(dirname $script)
+ exec ./$(basename $script) --plot "\$@"
+ EOF
+ chmod +x plot.sh
+ fi
+}
+
+
_run() {
- if [[ ! "$OPT_PLOT_ONLY" ]]; then
- kernel_versions=$(sshgw uname -r)
- else
- kernel_versions=$(ls results/by-kern)
+ if [[ $OPT_TRAFFIC = all ]]
+ then traffics="flood 50 oneatatime"
+ else traffics=${traffic:-$OPT_TRAFFIC}
fi
- for kvers in $kernel_versions; do
- dir=$(create_dirs_and_links $(basename $0 .sh) $kvers)
- script=$PWD/$0
+ if [[ $OPT_LOAD = all ]]
+ then loads="none cpu eth" # TODO: can
+ else loads=${load:-$OPT_LOAD}
+ fi
+ hostkvers=${hostkvers:-host-$(uname -r)}
+ kvers=${kvers:-$(sshgw -f uname -r)}
+ test=$(basename $0 .sh)
+ for load in $loads; do
+ for traffic in $traffics; do
+ dir="results/$hostkvers/$kvers/$traffic/$load/$test"
+ mkdir -p $dir
+ script=$(echo $dir | sed -e 's/[^/]*/../g')/${test}.sh
cd $dir
- echo "Working directory: $dir"
if [[ ! "$OPT_PLOT_ONLY" ]]; then
- # Remove data from the last measurement
- rm -rf *
- # Set can interfaces up
- sshgw 'for i in 0 1; do ip link show dev can$i|grep -q UP || ip link set can$i up type can bitrate 1000000; done'
- # Delete all vcan interfaces
- sshgw 'for dev in $(ip l|grep -o vcan[^:]\\+); do ip link del dev $dev; done'
- cleanupgw
-
- main
- cp $script .
+ echo "Working directory: $dir"
+ _measure
+ fi
+ if [[ ! "$OPT_PLOT_DISABLE" ]]; then
+ _plot
fi
- _plot
+ cd - > /dev/null
+ done
done
}
error "bug in the test script: No test_end called"
fi
if ! test -n "$exit_ok"; then
- error "FATAL: Command '$cmd' exited with code $code"
+ error "FATAL: Command '$cmd' exit with code $code"
fi
}