4 The Freescale MPC5606S is an PowerPC process with a e200Z0h core, VLE only
\r
8 http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=XPC560SKIT
\r
9 http://cache.freescale.com/files/microcontrollers/hardware_tools/schematics/XPC560SADPT176SSCH.pdf?fpsp=1
\r
10 http://cache.freescale.com/files/32bit/doc/user_guide/XPC560SEVBUM.pdf?fpsp=1
\r
12 http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC560xB_EVB&parentCode=XPC56xxMB&fpsp=1&nodeId=01624606C1427E
\r
15 http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC560xS&fsrch=1&sr=1
\r
18 8Mhz external crystal
\r
20 Supported compilers:
\r
25 CPU: e200z0h (VLE only)
\r
27 Flash: 1.0 MB, primary
\r
30 160K, Graphics RAM (not ECC)
\r
33 0x0000_0000 -> 0x000f_ffff Flash
\r
34 0x0080_0000 -> 0x0080_ffff Data Flash
\r
35 0x4000_0000 -> 0x4000_bfff SRAM
\r
36 0x6000_0000 -> 0x6002_7fff Graphics SRAM
\r
42 Adding a SPI EEPROM (Microship 25LC160B)
\r
44 To the left are the pins as they are names in XPC56xxMBSCH (schema for the main board, page 11 of 12)
\r
46 <- XPC560S ->#<---------------------- MCU --->
\r
48 ----------------------------------------------
\r
49 SINB,PJ1-7 # PB[7] 23 1 SIN_0
\r
50 SOUTB,PJ1-8 # PB[8] 24 1 SOUT_0
\r
51 SCKB,PJ1-9 # PB[9] 25 1 SCK_0
\r
52 PCSB1,PJ1-11 # PB[13] 29 3 PCS1_0
\r
54 PCSB2,PJ1-12 # PB[12] 28 3 PCS2_0 NOT USED
\r
55 PCSB0,PJ1-10 # PH[4] 103 1 PCS0_0 NOT USED
\r
59 CS - Connect to PJ1-11
\r
62 Rest of the pins are obvious
\r
64 Connected with 5V logic
\r
66 ---------------------------------- NOTE ----------------------------------
\r
67 The xPC560S EVB v1.0.1 manual is total crap in chapter "3.8 Pin Mapping"
\r
70 PCS0.2, should be PCS1_0
\r
72 As I understand it should map to Port F. However, PCS1_1 is
\r
73 located on PCR[78]=PF[8] on CPU is connected to PF[0] on PJ9!!
\r
74 ---------------------------------- NOTE ----------------------------------
\r
77 PJ1 Connector will have the following layout
\r
78 (With ArcCore internal harness and SO/SI as seen from memory):
\r
84 SO/Brown 7-X X-8 SI/Orange
\r
89 Gnd/Black 17-X X-18 VCC/Red
\r
92 If software CS is used Connector PJ2 and PJ[0] is used for that
\r
94 CS and PJ[0] 1-X X-2
\r
101 PCR[20]/PB[4]/SCK_1
\r
102 PCR[21]/PB[5]/SOUT_1
\r
103 PCR[22]/PB[6]/SIN_1
\r
108 SCK/Blue 5-X X-6 SI/Orange
\r
114 Gnd/Black 17-X X-18 VCC/Red
\r
117 CS/Green (See NOTE)
\r