boards/ti_tms570ls/config/Port_Cfg.c

   1 /*\r
   2  * Configuration of module Port (Port_Cfg.c)\r
   3  *\r
   4  * Created by: \r
   5  * Configured for (MCU): TMS570\r
   6  *\r
   7  * Module vendor: ArcCore\r
   8  * Module version: 2.0.2\r
   9  *\r
  10  * \r
  11  * Generated by Arctic Studio (http://arccore.com) \r
  12  *           on Fri Dec 10 07:52:22 CET 2010\r
  13  */\r
  14 \r
  15         \r
  16 \r
  17 #include "Port.h"\r
  18 \r
  19 \r
  20 \r
  21 const Port_ConfigType PortConfigData =\r
  22 {\r
  23     .pins = {\r
  24         {\r
  25                         .pin = PORT_PIN_DCAN1_TX,\r
  26                         .conf = ( PORT_PIN_OUT | PORT_FUNC | PORT_PULL_NONE ),\r
  27                 },                       \r
  28         {\r
  29                         .pin = PORT_PIN_DCAN1_RX,\r
  30                         .conf = ( PORT_PIN_IN | PORT_FUNC | PORT_PULL_NONE ),\r
  31                 },                       \r
  32         {\r
  33                         .pin = PORT_PIN_DCAN2_TX,\r
  34                         .conf = ( PORT_PIN_OUT | PORT_FUNC | PORT_PULL_NONE ),\r
  35                 },                       \r
  36         {\r
  37                         .pin = PORT_PIN_DCAN2_RX,\r
  38                         .conf = ( PORT_PIN_IN | PORT_FUNC | PORT_PULL_NONE ),\r
  39                 },                       \r
  40         {\r
  41                         .pin = PORT_PIN_DCAN3_TX,\r
  42                         .conf = ( PORT_PIN_OUT | PORT_FUNC | PORT_PULL_NONE ),\r
  43                 },                       \r
  44         {\r
  45                         .pin = PORT_PIN_DCAN3_RX,\r
  46                         .conf = ( PORT_PIN_IN | PORT_FUNC | PORT_PULL_NONE ),\r
  47                 },                       \r
  48         {\r
  49                         .pin = PORT_PIN_GIOA0,\r
  50                         .conf = ( PORT_PIN_OUT | PORT_FUNC_NO | PORT_PULL_NONE ),\r
  51                 },                       \r
  52         {\r
  53                         .pin = PORT_PIN_GIOA3,\r
  54                         .conf = ( PORT_PIN_OUT | PORT_FUNC_NO | PORT_PULL_NONE ),\r
  55                 },                       \r
  56         {\r
  57                         .pin = PORT_PIN_GIOA4,\r
  58                         .conf = ( PORT_PIN_OUT | PORT_FUNC_NO | PORT_PULL_NONE ),\r
  59                 },                       \r
  60         {\r
  61                         .pin = PORT_PIN_GIOA5,\r
  62                         .conf = ( PORT_PIN_OUT | PORT_FUNC_NO | PORT_PULL_NONE ),\r
  63                 },                        \r
  64     }\r
  65 };\r