CC2520 radio

Hardware

• TI/Chipcon CC2520 Second generation 2.4 GHz ZigBee/IEEE 802.15.4 RF transceiver
• Currently working with kit CC2520DK, picture CC2520DK picture

Software

• USB drivers only for Win XP
• TI Smart RF Studio link
• TI Z-Stack link
• IAR evaluation version IAR is not so pedantic, getting second evaluation license is possible

Report

April

9th - first contact with CC2520DK, testing factory code (packet error counting), the range seems to be sufficient with antenna (PCB antenna is not connected, it is a little bit confusing in schematic), test with running DC motor (model railway H0 1:87) nearby receiver (bad contact with sparkling), wireless communication is not affected, but program is sometimes corrupted because of sparkling

10th - simple sending packets via Smart RF Studio user guide page 112/113, firmware upgrade (evaluations boards + debugger) - one board without upgrade does not display messages from MSP, debugging of GenericApp (Coordinator + EndDevice)

14th - need replace - uses GPIO0 pin , mac_dualchip.c

                                        void macDualchipTurnOnRadioPower(void) {....}

18th - library functions are in APS.h - Router2618.lib, TIMAC-MSP2618.lib and other (security header files are referencing to Security2618.lib). Details are in .map file after compiling

19th -

       1. void macDualchipTurnOnRadioPower(void) {...
        macSpiWriteReg( GPIOCTRL1,  GPIO_DIR_RADIO_OUTPUT |  EXCEPTION_CHANNEL_A    ); //instead GPIOCTRL0
      //macSpiWriteReg( GPIOCTRL1,  GPIO_DIR_RADIO_OUTPUT |  EXCEPTION_RFC_FIFO     ); //wathching this state is not so critical
        ...}
       2. #define HAL_MAC_TX_ACK_DONE_GPIO_BIT            5      //instead 3

Exception EXCEPTION_RFC_FIFO is used only for defining of other states in mac_radio_defs.h and in interrupt service

#define MAC_RADIO_RX_FIFO_HAS_OVERFLOWED()            (HAL_MAC_READ_FIFOP_PIN() && !HAL_MAC_READ_FIFO_PIN())
#define MAC_RADIO_RX_FIFO_IS_EMPTY()                  (!HAL_MAC_READ_FIFO_PIN() && !HAL_MAC_READ_FIFOP_PIN())

HAL_ISR_FUNCTION( halMacFifopIsr, FIFOP_VECTOR() )
{...
  if (!HAL_MAC_READ_FIFOP_PIN() && HAL_MAC_READ_FIFO_PIN()){
  /*It appears that after rxPayloadIsr(), a FIFOP glitch can occur. ...*/
  //but rxPayloadIsr() is in this comment only
  ...}
...}

Notes

EW430_UserGuide

Setting up the simulation environment p55

Macro C-SPY reference p429

Tags in source

HAL_ISR_FUNCTION( halMacFifopIsr, FIFOP_VECTOR() ) - interrupt from the radio in hal_mac_config.c