MIDAM MPC5200 DB1: Difference between revisions
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
[[Image:Board overview.jpg]] | [[Image:Board overview.jpg]] | ||
==Serial console== | ==Serial line (system console)== | ||
* Loader system console is attached to the ttyPSC0 port. | * Loader system console is attached to the ttyPSC0 port. | ||
* The ttyPSC0 port is done in the LVTTL 3.3V logic, so appropriate 3.3V to RS-232 converter (e.g. MAX3232) is required for the serial console. | * The ttyPSC0 port is done in the LVTTL 3.3V logic, so appropriate 3.3V to RS-232 converter (e.g. MAX3232) is required for the serial console. | ||
Communication parameters: | |||
* baudrate: 115200 bps | |||
* bits: 8 bit | |||
* stop bits: 1 bit | |||
* Parity: none | |||
* Flow control: none | |||
==Cross-toolchain== | ==Cross-toolchain== | ||
Revision as of 14:33, 4 August 2008
Description
Two sets of the MIDAM MPC5200 was delivered by the Mikroklima s.r.o. for our purposes. Each set consist of the:
- Shark MPC52000 CPU module (pin compatible with TQ Components TQM5200 module),
- MPC5200 v1.1 2008/02 carrier board.
Set #1 has s/n: 008770, set #2 s/n: 008771.
Some specifications:
- Default boot loader is UBoot.
Board overview
Serial line (system console)
- Loader system console is attached to the ttyPSC0 port.
- The ttyPSC0 port is done in the LVTTL 3.3V logic, so appropriate 3.3V to RS-232 converter (e.g. MAX3232) is required for the serial console.
Communication parameters:
- baudrate: 115200 bps
- bits: 8 bit
- stop bits: 1 bit
- Parity: none
- Flow control: none
Cross-toolchain
Necessary cross-toolchain for PowerPC platform can be build using crossdev tool:
crossdev --b 2.18-r3 --k 2.6.23-r3 --g 4.1.2 --without-headers -t powerpc-unknown-linux-gnu