The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.
Dave Airlie [Mon, 15 Jul 2019 05:16:20 +0000 (15:16 +1000)]
mm: adjust apply_to_pfn_range interface for dropped token.
mm/pgtable: drop pgtable_t variable from pte_fn_t functions
drops the token came in via the hmm tree, this caused lots of
conflicts, but applying this cleanup patch should reduce it
to something easier to handle. Just accept the token is unused
at this point.
- Fix a saturation bit position in the colorspace converter
configuration memory.
- Fully describe colorspace conversions in the API to the imx-media driver.
- Add support for limited range and Rec.709 YUV encoding.
- Enable colorimetry configuration via the media-controller API.
- Enable the double write reduction feature for memory bandwidth savings
when the image converter writes YUV 4:2:0 output.
- Enable a scanout FIFO watermark feature that can increase priority of
scanout read transfers at the memory controller whenever the FIFO runs
low.
Dave Airlie [Thu, 11 Jul 2019 20:57:16 +0000 (06:57 +1000)]
Merge tag 'drm-next-5.3-2019-07-09' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.3-2019-07-09:
amdgpu:
- GPU reset for navi10
- Powerplay fixes for navi10
- GFX fixes for navi10
- Prepare for hmm_range_register API change
- XGMI fixes
- clang warning fixes
- Fixes for various kconfig scenarios
- Misc fixes and cleanups
amdkfd:
- Add workaround for soft hangs with oversubscribed runlists
- Remove duplicated pcie atomics request
Marek Olšák [Fri, 28 Jun 2019 22:31:26 +0000 (18:31 -0400)]
drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
This RELEASE_MEM use has the Release semantic, which means we should write
back but not invalidate. Invalidations only make sense with the Acquire
semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined
Acquire-Release semantic, which is a barrier, not a fence.
The undesirable side effect of doing invalidations for the Release semantic
is that it invalidates caches while shaders are running, because the Release
can execute in the middle of the next IB.
UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache
invalidations for a fence (like in this case) doesn't do anything
for correctness.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the two recently introduced instances to a multiply+shift
operation that is also much cheaper on 32-bit architectures.
We can do that here, since both of them are really 32-bit numbers
that change a few percent.
Fixes: bedbbe6af4be ("drm/amd/display: Move link functions from dc to dc_link") Fixes: f18bc4e53ad6 ("drm/amd/display: update calculated bounding box logic for NV") Acked-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 5 Jul 2019 20:39:39 +0000 (15:39 -0500)]
drm/amdgpu: properly guard DC support in navi code
Need to add appropriate ifdef.
Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this header, we get a compiler error in some configurations:
.../dc/dcn20/dcn20_hwseq.c: In function 'dcn20_hwss_wait_for_blank_complete':
.../dc/dcn20/dcn20_hwseq.c:1493:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration]
Note: the use of udelay itself may be problematic, as can occupy
the CPU for 200ms in a busy-loop here.
Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu
portion of the amdgpu driver:
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event'
struct hw_perf_event *hwc = &event->hw;
~~~~~ ^
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event'
if (event->attr.type != event->pmu->type)
~~~~~ ^
...
drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
clang warns (trimmed for brevity):
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: warning:
variable 'current_rpm' is used uninitialized whenever '?:' condition is
false [-Wsometimes-uninitialized]
ret = smu_get_current_rpm(smu, ¤t_rpm);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
smu_get_current_rpm expands to a ternary operator conditional on
smu->funcs->get_current_rpm being not NULL. When this is false,
current_rpm will be uninitialized. Zero initialize current_rpm to
avoid using random stack values if that ever happens.
Fixes: ee0db82027ee ("drm/amd/powerplay: move PPTable_t uses into asic level") Link: https://github.com/ClangBuiltLinux/linux/issues/588 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
clang warns (trimmed for brevity):
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1098:10: warning:
variable 'freq' is used uninitialized whenever '?:' condition is false
[-Wsometimes-uninitialized]
ret = smu_get_current_clk_freq_by_table(smu, clk_id, &freq);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If get_current_clk_freq_by_table is ever NULL, freq will fail to be
properly initialized. Zero initialize it to avoid using uninitialized
stack values.
smu_get_current_clk_freq_by_table expands to a ternary operator
conditional on smu->funcs->get_current_clk_freq_by_table being not NULL.
When this is false, freq will be uninitialized. Zero initialize freq to
avoid using random stack values if that ever happens.
drm/amd/powerplay: Use memset to initialize metrics structs
clang warns:
drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:601:33: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
static SmuMetrics_t metrics = {0};
^
{}
drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:905:26: warning:
suggest braces around initialization of subobject [-Wmissing-braces]
SmuMetrics_t metrics = {0};
^
{}
2 warnings generated.
One way to fix these warnings is to add additional braces like clang
suggests; however, there has been a bit of push back from some
maintainers[1][2], who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version[3], and properly initializes all
subobjects. Do that here so there are no more warnings.
Fixes: 98e1a543c7b1 ("drm/amd/powerplay: add function get current clock freq interface for navi10") Fixes: ab43c4bf1cc8 ("drm/amd/powerplay: fix fan speed show error (for hwmon pwm)") Link: https://github.com/ClangBuiltLinux/linux/issues/583 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In file included from drivers/gpu/drm/amd/amdgpu/nv.c:53:
drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:24:9: warning:
'__MES_V10_1_H__' is used as a header guard here, followed by #define of
a different macro [-Wheader-guard]
#ifndef __MES_V10_1_H__
^~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:25:9: note:
'__MES_v10_1_H__' is defined here; did you mean '__MES_V10_1_H__'?
#define __MES_v10_1_H__
^~~~~~~~~~~~~~~
__MES_V10_1_H__
1 warning generated.
Capitalize the V.
Fixes: 886f82aa7a1d ("drm/amdgpu/mes10.1: add ip block mes10.1 (v2)") Link: https://github.com/ClangBuiltLinux/linux/issues/582 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 4 Jul 2019 02:56:18 +0000 (10:56 +0800)]
drm/amd/powerplay: add temperature sensor support for navi10
the hwmon interface need temperature sensor type support.
1. SENSOR_HOTSPOT_TEMP
2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP)
3. SENSOR_MEM_TEMP
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Mon, 24 Jun 2019 08:48:33 +0000 (16:48 +0800)]
drm/amdgpu: fix scheduler timeout calc
scheduler timeout is in jiffies
v2: move timeout check to amdgpu_device_get_job_timeout_settings after
parsing the value
v3: add lockup_timeout param check. 0: keep default value. negative:
infinity timeout.
v4: refactor codes.
Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 2 Jul 2019 22:39:45 +0000 (18:39 -0400)]
drm/amdgpu: Prepare for hmm_range_register API change (v2)
An upcoming change in the hmm_range_register API requires passing in
a pointer to an hmm_mirror instead of mm_struct. To access the
hmm_mirror we need pass bo instead of ttm to amdgpu_ttm_tt_get_user_pages
because mirror is part of amdgpu_mn structure, which is accessible from bo.
v2: fix building without CONFIG_HMM_MIRROR (Arnd)
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 5 Jul 2019 04:51:45 +0000 (12:51 +0800)]
drm/amdgpu: add mode1 (psp) reset for navi asic
add mode1 (by psp) reset for navi asic.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Fri, 5 Jul 2019 20:58:46 +0000 (15:58 -0500)]
drm/amd/powerplay: add baco smu reset function for smu11
add baco reset support for smu11.
it can help gpu do asic reset when gpu recovery.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yrjan Skrimstad [Thu, 30 May 2019 00:08:21 +0000 (02:08 +0200)]
drm/amd/powerplay/smu7_hwmgr: replace blocking delay with non-blocking
This driver currently contains a repeated 500ms blocking delay call
which causes frequent major buffer underruns in PulseAudio. This patch
fixes this issue by replacing the blocking delay with a non-blocking
sleep call.
Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Reviewed-by: Christian König <Christian.Koenig@amd.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 4 Jul 2019 04:08:07 +0000 (14:08 +1000)]
Merge tag 'for-airlie-armada' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
Dave Airlie [Thu, 4 Jul 2019 01:46:02 +0000 (11:46 +1000)]
Merge tag 'exynos-drm-next-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Drop the use of drmP.h header file
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
Felix Kuehling [Thu, 20 Jun 2019 18:54:35 +0000 (14:54 -0400)]
drm/amdkfd: Disable idle optimization for chained runlist
This works around difficult-to-reproduce soft hangs on oversubscribed
runlists.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 20 Jun 2019 18:50:52 +0000 (14:50 -0400)]
drm/amdkfd: Add chained_runlist_idle_disable flag to pm4_mes_runlist
New flag to disable an idle runlist optimization that is causing soft
hangs with some diffult-to-reproduce customer workloads. This will
serve as a workaround until the problem can be reproduced and the
root-cause determined.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Sat, 29 Jun 2019 05:50:35 +0000 (01:50 -0400)]
drm/amdgpu: Fix tracking of invalid userptrs
Restore the code that resets mem->invalid. Othewise so mapping
userptrs after they got an MMU notifiers would always be skipped.
This also avoids unnecessarily calling get_user_pages on BOs that
have not been invalidated since the last try.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Fri, 7 Jun 2019 15:33:21 +0000 (11:33 -0400)]
drm/amdgpu: Use FENCE_OWNER_KFD in process_sync_pds_resv
We don't want eviction fences to trigger when waiting for page table
updates to complete during restore. In theory there shouldn't be any
unsignaled eviction fences in the PD reservation object, but I'm
seeing them in instrumented code for reasons not fully understood.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 20 Jun 2019 19:37:37 +0000 (15:37 -0400)]
drm/amdkfd: Print a warning when the runlist becomes oversubscribed
Oversubscription of queues or processes results in poor performance
mostly because HWS blinbly schedules busy and idle queues, resulting
in poor occupancy if many queues are idle.
Let users know with a warning message when transitioning from a
non-oversubscribed to an oversubscribed runlist.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Xiao [Wed, 29 May 2019 05:24:22 +0000 (13:24 +0800)]
drm/amdgpu: add field indicating if has PCIE atomics support
The new field in amdgpu device is used to record whether the
system has PCIE atomics support. The field can be exposed to
UMD or kfd whether PCIE atomics have supported.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 26 Jun 2019 02:53:39 +0000 (10:53 +0800)]
drm/amdgpu: fix MGPU fan boost enablement for XGMI reset
MGPU fan boost feature should not be enabled until all the
devices from the same hive are all back from reset.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Wed, 19 Jun 2019 23:26:59 +0000 (19:26 -0400)]
drm/amdgpu: handle AMDGPU_IB_FLAG_RESET_GDS_MAX_WAVE_ID on gfx10
Add the gfx10 equivalent of the gfx9 code.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Wed, 19 Jun 2019 23:26:24 +0000 (19:26 -0400)]
drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)
v2: update emit_ib_size
(though it's still wrong because it was wrong before)
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude Paul [Thu, 20 Jun 2019 23:21:26 +0000 (19:21 -0400)]
drm/amdgpu: Don't skip display settings in hwmgr_resume()
I'm not entirely sure why this is, but for some reason:
921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed")
Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:
[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).
And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.
Fixes: 921935dc6404 ("drm/amd/powerplay: enforce display related settings only on needed") Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Rex Zhu <Rex.Zhu@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lubomir Rintel [Mon, 21 Jan 2019 06:01:57 +0000 (07:01 +0100)]
drm/armada: replace the simple-framebuffer
If there's a simple-framebuffer carried over from boot firmware, it's going
to stop working once we setup the LCDC for use via DRM. Kick it off from
the hardware.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Dave Airlie [Thu, 27 Jun 2019 23:34:25 +0000 (09:34 +1000)]
Merge tag 'drm-msm-next-2019-06-25' of https://gitlab.freedesktop.org/drm/msm into drm-next
+ usual progress on cleanups
+ dsi vs EPROBE_DEFER fixes
+ msm8998 (snapdragon 835 support)
+ a540 gpu support (mesa support already landed)
+ dsi, dsi-phy support
+ mdp5 and dpu interconnect (bus/memory scaling) support
+ initial prep work for per-context pagetables (at least the parts that
don't have external dependencies like iommu/arm-smmu)
There is one more patch for fixing DSI cmd mode panels (part of a set of
patches to get things working on nexus5), but it would be conflicty with 1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge,
and since it doesn't conflict with anything in msm-next, I think it best
if Sean merges that through drm-mix-fixes instead.
(In other news, I've been making some progress w/ getting efifb working
properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff
not totally falling over when bootloader enables display and things are
already running when driver probes.. but not quite ready yet, hopefully
we can post some of that for 5.4.. should help for both the sdm835 and
sdm850 laptops.)
Evan Quan [Fri, 21 Jun 2019 01:46:14 +0000 (09:46 +0800)]
drm/amd/powerplay: no memory activity support on Vega10
Make mem_busy_percent sysfs interface invisible on Vega10.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 25 Jun 2019 03:06:08 +0000 (11:06 +0800)]
drm/amd/powerplay: support runtime ppfeatures setting on Navi10
Implement Navi10 backend for runtime ppfeatures status retrieving
and setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 26 Jun 2019 06:32:43 +0000 (02:32 -0400)]
drm/ttm: return -EBUSY if waiting for busy BO fails
Returning -EAGAIN prevents ttm_bo_mem_space from trying alternate
placements and can lead to live-locks in amdgpu_cs, retrying
indefinitely and never succeeding.
Fixes: d367bd2a5e2b12 ("drm/ttm: fix busy memory to fail other user v10") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sam Ravnborg [Thu, 27 Jun 2019 11:00:54 +0000 (20:00 +0900)]
drm/exynos: trigger build of all modules
Add COMPILE_TEST dependency to force exynos driver to
built for more than arm and to built modules
that otherwise required other symbols to be de-selected.
This will increase build coverage of the exynos driver
thus allowing most trivial build errors to be detected/fixed early.
This introduces one warning when built using sh:
exynos7_drm_decon.c: In function ‘decon_remove’:
exynos7_drm_decon.c:769:24: warning: unused variable ‘ctx’
struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
This is due to the definition of iounmap() in sh,
and nothing that exynos driver can fix.
Include fix of exynos build for alpha.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Thu, 27 Jun 2019 02:33:56 +0000 (12:33 +1000)]
Merge tag 'drm-next-5.3-2019-06-25' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.3-2019-06-25:
Merge drm-next
amdgpu:
- SR-IOV L1 policy fixes
- Removed no longer needed vram_page_split module parameter
- Add module parameter to override default ABM level
- Gamma fixes
- No need to check return values for debugfs
- Improve HMM error handling
- Avoid possible OOM situations when lots of thread are submitting with
memory contention
- Improve hw i2c access abritration
- DSC (Display Stream Compression) support in DC
- Initial navi10 support
* DC support
* GFX/Compute support
* SDMA support
* Power Management support
* VCN support
- Static checker fixes
- Misc cleanups
- fix long udelay on arm
amdkfd:
- Implement priority controls for gfx9
- Enable VEGAM
- Rework mqd allocation and init
- Circular locking fix
- Fix SDMA queue allocation race condition
- No need to check return values for debugfs
- Add proc style process information
- Initial navi10 support
radeon:
- No need to check return values for debugfs
UAPI changes:
- GDDR6 added to vram type query
- New Navi10 details added gpu info query
- Navi family added to asic family query
Dave Airlie [Thu, 27 Jun 2019 01:48:02 +0000 (11:48 +1000)]
Merge tag 'for-airlie-tda998x' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
TDA998x updates:
- improve the driver's approach to audio, adding support for more I2S
based formats, particularly other justifications, and preparing the
driver to support other bclk ratios.
- add support for pixel repeated modes, tested with a Panasonic TV.
- correct the quantisation range handling; in particular, do not send
full range RGB to the sink when the sink does not support full range
RGB.
Merge tag 'topic/remove-fbcon-notifiers-2019-06-26' into drm-misc-next-fixes
topic/remove-fbcon-notifiers:
- Export fbcon_update_vcs to fix sh_mobile_lcdcfb.c compilation.
- Rely on fbcon being builtin when vgaswitcheroo is builtin.
Daniel Vetter [Mon, 24 Jun 2019 09:21:53 +0000 (11:21 +0200)]
vga_switcheroo: Depend upon fbcon being built-in, if enabled
Fixes linking fail when fbcon/fbdev is modular and vgaswitcheroo is
enabled:
x86_64-linux-gnu-ld: drivers/gpu/vga/vga_switcheroo.o: in function `vga_switchto_stage2':
vga_switcheroo.c:(.text+0x997): undefined reference to `fbcon_remap_all'
Unfortunately this means that in a default allmodconfig we will disable vgaswitcheroo.
v2: I first tried to fix this with an EXPORT_SYMBOL, but vga_switcheroo is
never a module, so this doesn't work.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Fixes: 1cd51b5d200d ("vgaswitcheroo: call fbcon_remap_all directly") Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190624092153.23375-1-daniel.vetter@ffwll.ch
Kevin Wang [Mon, 17 Jun 2019 05:05:00 +0000 (13:05 +0800)]
drm/amd/powerplay: add feature check in unforce_dpm_levels function (v2)
if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level
v2: whitespace fix (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rui Teng <rui.teng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 14 Jun 2019 09:04:36 +0000 (17:04 +0800)]
drm/amd/powerplay: check gfxclk dpm enablement before proceeding
Support gfxclk dpm disablement.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 11 Jun 2019 07:21:06 +0000 (15:21 +0800)]
drm/amd/powerplay: print smu versions only if version mismatch
only printf smu version when if version not matched.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Thu, 6 Jun 2019 09:12:34 +0000 (17:12 +0800)]
drm/amd/powerplay: fix fan speed show error (for hwmon pwm)
the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: update infoframe after dig fe is turned on (v2)
[Why]
The AVI infoframe is incorrectly programmed on DCN1/2 when enabling a
stream - causing the wrong pixel encoding to be used for display.
This is because the AVI infoframe is programmed before the DIG BE is
connected to the FE and turned on, so enabling the AFMT block doesn't
actually work and the registers subsequently can't be written to.
[How]
Program the infoframe *after* turning on the DIG FE. This was the
behavior previously used but it was incorrectly reverted
when adding the DCN2 HW sequencer code.
v2: Don't call update_info_frame twice
Fixes: 7ed4e6352c16fe01 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Mon, 24 Jun 2019 09:25:26 +0000 (17:25 +0800)]
drm/amd/powerplay:clean up the residual mutex for smu_hw_init
The mutex for procting SMU during hw_init was removed as system
will be deadlock when smu_populate_umd_state_clk try get SMU mutex.
Therefore need remove the residual mutex from failed path.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ernst Sjöstrand [Mon, 24 Jun 2019 15:15:42 +0000 (17:15 +0200)]
drm/amd/amdgpu: Check stream in amdgpu_dm_commit_planes
Reported by smatch:
amdgpu_dm.c:5637 amdgpu_dm_commit_planes() error: we previously assumed 'acrtc_state->stream' could be null
This seems to be checked for null pretty consistently elsewhere.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 25 Jun 2019 13:54:21 +0000 (08:54 -0500)]
drm/amdgpu/display: switch udelay to msleep
We may need to sleep for up to 80ms
(8ms per each of up to 10 loop iterations):
/* First DPCD read after VDD ON can fail if the particular board
* does not have HPD pin wired correctly. So if DPCD read fails,
* which it should never happen, retry a few times. Target worst
* case scenario of 80 ms.
*/
Switch udelay to msleep to avoid limits on arm.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brian Masney [Fri, 31 May 2019 09:46:14 +0000 (05:46 -0400)]
drm/msm: add dirty framebuffer helper
Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Andres Rodriguez [Wed, 19 Jun 2019 18:09:01 +0000 (14:09 -0400)]
drm/edid: parse CEA blocks embedded in DisplayID
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Dave Airlie [Tue, 25 Jun 2019 02:49:08 +0000 (12:49 +1000)]
Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!
Rob Clark [Mon, 24 Jun 2019 16:09:47 +0000 (09:09 -0700)]
drm/msm/a3xx: remove TPL1 regs from snapshot
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b03155 drm/msm: add a3xx gpu support Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Hawking Zhang [Mon, 24 Jun 2019 11:26:00 +0000 (19:26 +0800)]
drm/amdgpu: fix modprobe failure for uvd_4/5/6
For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.
The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.
projects / zynq / linux.git / log