arm64: zynqmp: dt: Add TI PHY quirk

[zynq/linux.git] / arch / arm64 / boot / dts / xilinx / zynqmp-zcu102-revA.dts

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 25dd57485323507888ebfc66cebdcfc858f5a3a3..2a3b66547c6d93a2331b2f799334d08c361535e9 100644 (file)
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -46,14 +46,14 @@
                        label = "sw19";
                        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_DOWN>;
-                       gpio-key,wakeup;
+                       wakeup-source;
                        autorepeat;
                };
        };
 
        leds {
                compatible = "gpio-leds";
-               heartbeat_led {
+               heartbeat-led {
                        label = "heartbeat";
                        gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "heartbeat";
@@ -110,6 +110,7 @@
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;
                ti,fifo-depth = <0x1>;
+               ti,dp83867-rxctrl-strap-quirk;
        };
 };
 
@@ -139,25 +140,25 @@
                 * 7, 10 - 17 - not connected
                 */
 
-               gtr_sel0 {
+               gtr-sel0 {
                        gpio-hog;
                        gpios = <0 0>;
                        output-low; /* PCIE = 0, DP = 1 */
                        line-name = "sel0";
                };
-               gtr_sel1 {
+               gtr-sel1 {
                        gpio-hog;
                        gpios = <1 0>;
                        output-high; /* PCIE = 0, DP = 1 */
                        line-name = "sel1";
                };
-               gtr_sel2 {
+               gtr-sel2 {
                        gpio-hog;
                        gpios = <2 0>;
                        output-high; /* PCIE = 0, USB0 = 1 */
                        line-name = "sel2";
                };
-               gtr_sel3 {
+               gtr-sel3 {
                        gpio-hog;
                        gpios = <3 0>;
                        output-high; /* PCIE = 0, SATA = 1 */