Fix build of h8300 hi_cpu2 board support - not tested.

[sysless.git] / board / h8300 / hi_cpu2 / config.hi_cpu2

diff --git a/board/h8300/hi_cpu2/config.hi_cpu2 b/board/h8300/hi_cpu2/config.hi_cpu2
index b67fc974a7c4ad41798806293eb3c6b3dc322ac2..dd89fd3778ac604059002fb738330c94830a7a45 100644 (file)
--- a/board/h8300/hi_cpu2/config.hi_cpu2
+++ b/board/h8300/hi_cpu2/config.hi_cpu2
@@ -6,7 +6,7 @@ BOARD=hi_cpu2
 
 #PREFIX_DIR=$(ARCH)
 
-CROSS_COMPILE = h8300-coff-
+CROSS_COMPILE = h8300-elf-
 TARGET_ARCH = -ms
 
 # Set default C flags. If theese are set elsewhere (e.g. on a command
@@ -16,9 +16,9 @@ OPTIMIZE ?= -O2
 
 -include $(MAKERULES_DIR)/config.tohit
 HIT_BAUD ?= 57600
-HIT_DEV ?= /dev/ttyS0
+HIT_DEV ?= /dev/tts/USB0
 TOHIT = $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils/tohit --baud $(HIT_BAUD) --sdev $(HIT_DEV)
-LOAD_CMD-ram = $(TOHIT) --blockmode 32 --start 0x200000
+LOAD_CMD-ram = $(TOHIT) --blockmode 32 --start 0x500000
 LOAD_CMD-boot = \
        $(TOHIT) --erase --start 0x000000 --length 0x1600; \
        $(TOHIT) --command 1 --blockmode 32 --start 0x000000 
@@ -30,7 +30,7 @@ LOAD_CMD-flashnoram = \
        $(TOHIT) --erase --start 0x004000 --length 0x03C000; \
        $(TOHIT) --command 1 --blockmode 32 --start 0x004000 
 
-RUN_CMD-ram = $(TOHIT) --go 0x200000
+RUN_CMD-ram = $(TOHIT) --go 0x500000
 RUN_CMD-flash = $(TOHIT) --go 0x004000
 
 # This selects linker script
@@ -38,3 +38,8 @@ LD_SCRIPT = hi_cpu2
 DEFAULT_LD_SCRIPT_VARIANT = ram
 
 OUTPUT_FORMATS = bin
+
+
+CONFIG_USB_BASE=n
+CONFIG_USB_PDIUSB=n
+CONFIG_USB_MORE=n