[[!meta title="LinCAN (CAN bus driver)"]]
-LinCAN is a Linux kernel module that implements a CAN driver capable of working with multiple cards, even with different chips and IO methods. Each communication object can be accessed from multiple applications concurrently. It supports RT-Linux, 2.2, 2.4, and 2.6 with fully implemented select, poll, fasync, O_NONBLOCK, and O_SYNC semantics and multithreaded read/write capabilities. It works with the common Intel i82527, Philips 82c200, and Philips SJA1000 (in standard and PeliCAN mode) CAN controllers. It is part of a set of CAN/CANopen related components originally developed as part of OCERA framework. The CAN related components have been separated into its own OrtCAN repository.
\ No newline at end of file
+LinCAN is a Linux kernel module that implements a CAN driver capable
+of working with multiple cards, even with different chips and IO methods.
+Each communication object can be accessed from multiple applications concurrently.
+It supports RT-Linux, 2.2, 2.4, and 2.6 with fully implemented select,
+poll, fasync, O_NONBLOCK, and O_SYNC semantics and multithreaded
+read/write capabilities. It works with the common Intel i82527,
+Philips 82c200, and Philips SJA1000 (in standard and PeliCAN mode)
+CAN controllers. It is part of a set of CAN/CANopen related components
+originally developed as part of OCERA framework. The CAN related components
+have been separated into its own OrtCAN repository.
+
+[[The list of supported hardware and boards|boards]]
+
+## LinCAN Quick Build Instructions
+
+There are more options to build LinCAN driver.
+The first one is to use standalone driver
+module build. The latest version of standalone LinCAN
+sources can be obtained from GIT repository and build
+by next commands
+
+ git clone git://ortcan.git.sourceforge.net/gitroot/ortcan/lincan
+ cd lincan
+ ./build-lincan.sh
+
+The other option is to build LinCAN driver as part
+of the whole OrtCAN tree
+
+ git clone git://ortcan.git.sourceforge.net/gitroot/ortcan/ortcan
+ cd ortcan/
+ git submodule update --init
+ make default-config
+ make
+
+The default configuration options should be overridden by user specified
+options in toplevel "config.omk" file before final "make" invocation.
+The choices 'y'/'n' can be specified to enable or disable build
+of specified hardware/board support, it would be next line in "config.omk"
+file for [[tscan1]] card for example
+
+ CONFIG_OC_LINCAN_CARD_tscan1=y
+
+If the build should target other then actually running kernel then
+*LINUX_DIR* option in "config.omk" file is used to specify location,
+where kernel has been build. If a build for non-native architecture
+is required then cross-compiler binaries have to be specified
+
+ LINUX_DIR=/usr/src/linux-2.6-mpc51200-build
+ CC=powerpc-linux-gnu-gcc
+ CXX=powerpc-linux-gnu-g++
+ AR=powerpc-linux-gnu-ar
+ LD=powerpc-linux-gnu-ld