*/
static bool is_edp(struct intel_dp *intel_dp)
{
- return intel_dp->base.type == INTEL_OUTPUT_EDP;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+
+ return intel_dig_port->base.type == INTEL_OUTPUT_EDP;
}
/**
return is_edp(intel_dp) && !is_pch_edp(intel_dp);
}
+static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+
+ return intel_dig_port->base.base.dev;
+}
+
static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
{
- return container_of(intel_attached_encoder(connector),
- struct intel_dp, base);
+ return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
}
/**
intel_edp_link_config(struct intel_encoder *intel_encoder,
int *lane_num, int *link_bw)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
*lane_num = intel_dp->lane_count;
*link_bw = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
intel_edp_target_clock(struct intel_encoder *intel_encoder,
struct drm_display_mode *mode)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
struct intel_connector *intel_connector = intel_dp->attached_connector;
if (intel_connector->panel.fixed_mode)
return max_link_bw;
}
-static int
-intel_dp_link_clock(uint8_t link_bw)
-{
- if (link_bw == DP_LINK_BW_2_7)
- return 270000;
- else
- return 162000;
-}
-
/*
* The units on the numbers in the next two are... bizarre. Examples will
* make it clearer; this one parallels an example in the eDP spec.
struct drm_display_mode *mode,
bool adjust_mode)
{
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_link_clock =
+ drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
int max_rate, mode_rate;
static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
static void
intel_dp_check_edp(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
if (!is_edp(intel_dp))
}
}
+static uint32_t
+intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+ uint32_t status;
+ bool done;
+
+ if (IS_HASWELL(dev)) {
+ switch (intel_dig_port->port) {
+ case PORT_A:
+ ch_ctl = DPA_AUX_CH_CTL;
+ break;
+ case PORT_B:
+ ch_ctl = PCH_DPB_AUX_CH_CTL;
+ break;
+ case PORT_C:
+ ch_ctl = PCH_DPC_AUX_CH_CTL;
+ break;
+ case PORT_D:
+ ch_ctl = PCH_DPD_AUX_CH_CTL;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ if (has_aux_irq)
+ done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+ else
+ done = wait_for_atomic(C, 10) == 0;
+ if (!done)
+ DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
+ has_aux_irq);
+#undef C
+
+ return status;
+}
+
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
uint8_t *send, int send_bytes,
uint8_t *recv, int recv_size)
{
uint32_t output_reg = intel_dp->output_reg;
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = output_reg + 0x10;
uint32_t ch_data = ch_ctl + 4;
- int i;
- int recv_bytes;
+ int i, ret, recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
int try, precharge;
+ bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+ /* dp aux is extremely sensitive to irq latency, hence request the
+ * lowest possible wakeup latency and so prevent the cpu from going into
+ * deep sleep states.
+ */
+ pm_qos_update_request(&dev_priv->pm_qos, 0);
if (IS_HASWELL(dev)) {
- switch (intel_dp->port) {
+ switch (intel_dig_port->port) {
case PORT_A:
ch_ctl = DPA_AUX_CH_CTL;
ch_data = DPA_AUX_CH_DATA1;
* clock divider.
*/
if (is_cpu_edp(intel_dp)) {
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
else if (IS_VALLEYVIEW(dev))
aux_clock_divider = 100;
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
- status = I915_READ(ch_ctl);
+ status = I915_READ_NOTRACE(ch_ctl);
if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
break;
msleep(1);
if (try == 3) {
WARN(1, "dp_aux_ch not started status 0x%08x\n",
I915_READ(ch_ctl));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Must try at least 3 times according to DP spec */
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl,
DP_AUX_CH_CTL_SEND_BUSY |
+ (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_TIME_OUT_400us |
(send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR);
- for (;;) {
- status = I915_READ(ch_ctl);
- if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
- break;
- udelay(100);
- }
+
+ status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
if ((status & DP_AUX_CH_CTL_DONE) == 0) {
DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Check for timeout or receive error.
*/
if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
/* Timeouts occur when the device isn't connected, so they're
* "normal" -- don't fill the kernel log with these */
if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto out;
}
/* Unload any bytes sent back from the other side */
unpack_aux(I915_READ(ch_data + i),
recv + i, recv_bytes - i);
- return recv_bytes;
+ ret = recv_bytes;
+out:
+ pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+ return ret;
}
/* Write data to the aux channel in native mode */
return -EREMOTEIO;
}
-static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
-static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
-
static int
intel_dp_i2c_init(struct intel_dp *intel_dp,
struct intel_connector *intel_connector, const char *name)
return ret;
}
-static bool
+bool
intel_dp_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
adjusted_mode);
- intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
+ intel_pch_panel_fitting(dev,
+ intel_connector->panel.fitting_mode,
mode, adjusted_mode);
}
for (clock = 0; clock <= max_clock; clock++) {
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
- int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+ int link_bw_clock =
+ drm_dp_bw_code_to_link_rate(bws[clock]);
+ int link_avail = intel_dp_max_data_rate(link_bw_clock,
+ lane_count);
if (mode_rate <= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ adjusted_mode->clock = link_bw_clock;
DRM_DEBUG_KMS("DP link bw %02x lane "
"count %d clock %d bpp %d\n",
intel_dp->link_bw, intel_dp->lane_count,
return false;
}
-struct intel_dp_m_n {
- uint32_t tu;
- uint32_t gmch_m;
- uint32_t gmch_n;
- uint32_t link_m;
- uint32_t link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
- while (*num > 0xffffff || *den > 0xffffff) {
- *num >>= 1;
- *den >>= 1;
- }
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
- int nlanes,
- int pixel_clock,
- int link_clock,
- struct intel_dp_m_n *m_n)
-{
- m_n->tu = 64;
- m_n->gmch_m = (pixel_clock * bpp) >> 3;
- m_n->gmch_n = link_clock * nlanes;
- intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- m_n->link_m = pixel_clock;
- m_n->link_n = link_clock;
- intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
+ struct intel_encoder *intel_encoder;
+ struct intel_dp *intel_dp;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int lane_count = 4;
- struct intel_dp_m_n m_n;
+ struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
/*
* Find the lane count in the intel_encoder private
*/
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ intel_dp = enc_to_intel_dp(&intel_encoder->base);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
- intel_dp->base.type == INTEL_OUTPUT_EDP)
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_encoder->type == INTEL_OUTPUT_EDP)
{
lane_count = intel_dp->lane_count;
break;
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
- intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
}
}
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ /* For a long time we've carried around a ILK-DevA w/a for the
+ * 160MHz clock. If we're really unlucky, it's still required.
+ */
+ DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+
+ I915_WRITE(DP_A, dpa_ctl);
+
+ POSTING_READ(DP_A);
+ udelay(500);
+}
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/*
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
+
+ if (is_cpu_edp(intel_dp))
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
u32 mask,
u32 value)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
return control;
}
-static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
+void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
{
struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
struct intel_dp, panel_vdd_work);
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
mutex_lock(&dev->mode_config.mutex);
ironlake_panel_vdd_off_sync(intel_dp);
mutex_unlock(&dev->mode_config.mutex);
}
-static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
{
if (!is_edp(intel_dp))
return;
}
}
-static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
+void ironlake_edp_panel_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
}
}
-static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
+void ironlake_edp_panel_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
ironlake_wait_panel_off(intel_dp);
}
-static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = to_intel_crtc(intel_dp->base.base.crtc)->pipe;
+ int pipe = to_intel_crtc(intel_dig_port->base.base.crtc)->pipe;
u32 pp;
if (!is_edp(intel_dp))
intel_panel_enable_backlight(dev, pipe);
}
-static void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
return true;
}
}
- }
- DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", intel_dp->output_reg);
+ DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
+ intel_dp->output_reg);
+ }
return true;
}
static uint8_t
intel_dp_voltage_max(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
return DP_TRAIN_VOLTAGE_SWING_800;
static uint8_t
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (IS_HASWELL(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
}
static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
{
uint32_t signal_levels = 0;
/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
static uint32_t
-intel_dp_signal_levels_hsw(uint8_t train_set)
+intel_hsw_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
}
}
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ uint32_t signal_levels, mask;
+ uint8_t train_set = intel_dp->train_set[0];
+
+ if (IS_HASWELL(dev)) {
+ signal_levels = intel_hsw_signal_levels(train_set);
+ mask = DDI_BUF_EMP_MASK;
+ } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ signal_levels = intel_gen7_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen6_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+ } else {
+ signal_levels = intel_gen4_signal_levels(train_set);
+ mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
+ }
+
+ DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+ *DP = (*DP & ~mask) | signal_levels;
+}
+
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
uint8_t dp_train_pat)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ enum port port = intel_dig_port->port;
int ret;
uint32_t temp;
if (IS_HASWELL(dev)) {
- temp = I915_READ(DP_TP_CTL(intel_dp->port));
+ temp = I915_READ(DP_TP_CTL(port));
if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
case DP_TRAINING_PATTERN_DISABLE:
temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
- I915_WRITE(DP_TP_CTL(intel_dp->port), temp);
+ I915_WRITE(DP_TP_CTL(port), temp);
- if (wait_for((I915_READ(DP_TP_STATUS(intel_dp->port)) &
+ if (wait_for((I915_READ(DP_TP_STATUS(port)) &
DP_TP_STATUS_IDLE_DONE), 1))
DRM_ERROR("Timed out waiting for DP idle patterns\n");
temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
break;
}
- I915_WRITE(DP_TP_CTL(intel_dp->port), temp);
+ I915_WRITE(DP_TP_CTL(port), temp);
} else if (HAS_PCH_CPT(dev) &&
(IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
void
intel_dp_start_link_train(struct intel_dp *intel_dp)
{
- struct drm_encoder *encoder = &intel_dp->base.base;
+ struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
struct drm_device *dev = encoder->dev;
int i;
uint8_t voltage;
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
intel_ddi_prepare_link_retrain(encoder);
/* Write the link configuration data */
for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
uint8_t link_status[DP_LINK_STATUS_SIZE];
- uint32_t signal_levels;
-
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(
- intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
- DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n",
- signal_levels);
+
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* Set training pattern 1 */
if (!intel_dp_set_link_train(intel_dp, DP,
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
if (i == intel_dp->lane_count && voltage_tries == 5) {
- if (++loop_tries == 5) {
+ ++loop_tries;
+ if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
break;
}
}
/* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- voltage_tries = 0;
- } else
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
++voltage_tries;
+ if (voltage_tries == 5) {
+ DRM_DEBUG_KMS("too many voltage retries, give up\n");
+ break;
+ }
+ } else
+ voltage_tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Compute new intel_dp->train_set as requested by target */
intel_get_adjust_train(intel_dp, link_status);
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
cr_tries = 0;
channel_eq = false;
for (;;) {
- /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
- uint32_t signal_levels;
uint8_t link_status[DP_LINK_STATUS_SIZE];
if (cr_tries > 5) {
break;
}
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, DP,
static void
intel_dp_link_down(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t DP = intel_dp->DP;
/*
* intel_ddi_prepare_link_retrain will take care of redoing the link
* train.
*/
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
return;
if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
}
POSTING_READ(intel_dp->output_reg);
- msleep(17);
+ /* We don't really know why we're doing this */
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
if (HAS_PCH_IBX(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
/* Hardware workaround: leaving our transcoder select
* set to transcoder B while it's off will prevent the
/* Changes to enable or select take place the vblank
* after being written.
*/
- if (crtc == NULL) {
- /* We can arrive here never having been attached
- * to a CRTC, for instance, due to inheriting
- * random state from the BIOS.
- *
- * If the pipe is not running, play safe and
- * wait for the clocks to stabilise before
- * continuing.
- */
+ if (WARN_ON(crtc == NULL)) {
+ /* We should never try to disable a port without a crtc
+ * attached. For paranoia keep the code around for a
+ * bit. */
POSTING_READ(intel_dp->output_reg);
msleep(50);
} else
- intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
}
DP &= ~DP_AUDIO_OUTPUT_ENABLE;
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
+ char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) == 0)
return false; /* aux transfer failed */
+ hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+ 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+ DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
return false; /* DPCD not present */
* 4. Check link status on receipt of hot-plug interrupt
*/
-static void
+void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
+ struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
u8 sink_irq_vector;
u8 link_status[DP_LINK_STATUS_SIZE];
- if (!intel_dp->base.connectors_active)
+ if (!intel_encoder->connectors_active)
return;
- if (WARN_ON(!intel_dp->base.base.crtc))
+ if (WARN_ON(!intel_encoder->base.crtc))
return;
/* Try to read receiver status if the link appears to be up */
if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
- drm_get_encoder_name(&intel_dp->base.base));
+ drm_get_encoder_name(&intel_encoder->base));
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
}
static enum drm_connector_status
ironlake_dp_detect(struct intel_dp *intel_dp)
{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum drm_connector_status status;
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp)) {
- status = intel_panel_detect(intel_dp->base.base.dev);
+ status = intel_panel_detect(dev);
if (status == connector_status_unknown)
status = connector_status_connected;
return status;
}
+ if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+ return connector_status_disconnected;
+
return intel_dp_detect_dpcd(intel_dp);
}
static enum drm_connector_status
g4x_dp_detect(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit;
return intel_ddc_get_modes(connector, adapter);
}
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ struct drm_device *dev = connector->dev;
enum drm_connector_status status;
struct edid *edid = NULL;
else
status = g4x_dp_detect(intel_dp);
- DRM_DEBUG_KMS("DPCD: %02hx%02hx%02hx%02hx%02hx%02hx%02hx%02hx\n",
- intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2],
- intel_dp->dpcd[3], intel_dp->dpcd[4], intel_dp->dpcd[5],
- intel_dp->dpcd[6], intel_dp->dpcd[7]);
-
if (status != connector_status_connected)
return status;
}
}
+ if (intel_encoder->type != INTEL_OUTPUT_EDP)
+ intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
return connector_status_connected;
}
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_connector *intel_connector = to_intel_connector(connector);
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = connector->dev;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
uint64_t val)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct intel_encoder *intel_encoder = intel_attached_encoder(connector);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
int ret;
- ret = drm_connector_property_set_value(connector, property, val);
+ ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
goto done;
}
+ if (is_edp(intel_dp) &&
+ property == connector->dev->mode_config.scaling_mode_property) {
+ if (val == DRM_MODE_SCALE_NONE) {
+ DRM_DEBUG_KMS("no scaling not supported\n");
+ return -EINVAL;
+ }
+
+ if (intel_connector->panel.fitting_mode == val) {
+ /* the eDP scaling property is not changed */
+ return 0;
+ }
+ intel_connector->panel.fitting_mode = val;
+
+ goto done;
+ }
+
return -EINVAL;
done:
- if (intel_dp->base.base.crtc) {
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ if (intel_encoder->base.crtc) {
+ struct drm_crtc *crtc = intel_encoder->base.crtc;
intel_set_mode(crtc, &crtc->mode,
crtc->x, crtc->y, crtc->fb);
}
kfree(connector);
}
-static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
+void intel_dp_encoder_destroy(struct drm_encoder *encoder)
{
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+ struct intel_dp *intel_dp = &intel_dig_port->dp;
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
- kfree(intel_dp);
+ kfree(intel_dig_port);
}
static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
.disable = intel_encoder_noop,
};
-static const struct drm_encoder_helper_funcs intel_dp_helper_funcs_hsw = {
- .mode_fixup = intel_dp_mode_fixup,
- .mode_set = intel_ddi_mode_set,
- .disable = intel_encoder_noop,
-};
-
static const struct drm_connector_funcs intel_dp_connector_funcs = {
.dpms = intel_connector_dpms,
.detect = intel_dp_detect,
static void
intel_dp_hot_plug(struct intel_encoder *intel_encoder)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
intel_dp_check_link_status(intel_dp);
}
intel_trans_dp_port_sel(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
+ struct intel_encoder *intel_encoder;
+ struct intel_dp *intel_dp;
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ intel_dp = enc_to_intel_dp(&intel_encoder->base);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
- intel_dp->base.type == INTEL_OUTPUT_EDP)
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_encoder->type == INTEL_OUTPUT_EDP)
return intel_dp->output_reg;
}
static void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
{
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
+
+ if (is_edp(intel_dp)) {
+ drm_mode_create_scaling_mode_property(connector->dev);
+ drm_connector_attach_property(
+ connector,
+ connector->dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_ASPECT);
+ intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
+ }
}
static void
}
void
-intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
+intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
+ struct intel_connector *intel_connector)
{
+ struct drm_connector *connector = &intel_connector->base;
+ struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_connector *connector;
- struct intel_dp *intel_dp;
- struct intel_encoder *intel_encoder;
- struct intel_connector *intel_connector;
struct drm_display_mode *fixed_mode = NULL;
+ enum port port = intel_dig_port->port;
const char *name = NULL;
int type;
- intel_dp = kzalloc(sizeof(struct intel_dp), GFP_KERNEL);
- if (!intel_dp)
- return;
-
- intel_dp->output_reg = output_reg;
- intel_dp->port = port;
/* Preserve the current hw state. */
intel_dp->DP = I915_READ(intel_dp->output_reg);
-
- intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
- if (!intel_connector) {
- kfree(intel_dp);
- return;
- }
- intel_encoder = &intel_dp->base;
intel_dp->attached_connector = intel_connector;
- if (HAS_PCH_SPLIT(dev) && output_reg == PCH_DP_D)
+ if (HAS_PCH_SPLIT(dev) && port == PORT_D)
if (intel_dpd_is_edp(dev))
intel_dp->is_pch_edp = true;
* FIXME : We need to initialize built-in panels before external panels.
* For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup
*/
- if (IS_VALLEYVIEW(dev) && output_reg == DP_C) {
+ if (IS_VALLEYVIEW(dev) && port == PORT_C) {
type = DRM_MODE_CONNECTOR_eDP;
intel_encoder->type = INTEL_OUTPUT_EDP;
- } else if (output_reg == DP_A || is_pch_edp(intel_dp)) {
+ } else if (port == PORT_A || is_pch_edp(intel_dp)) {
type = DRM_MODE_CONNECTOR_eDP;
intel_encoder->type = INTEL_OUTPUT_EDP;
} else {
+ /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for
+ * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't
+ * rewrite it.
+ */
type = DRM_MODE_CONNECTOR_DisplayPort;
- intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
}
- connector = &intel_connector->base;
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
connector->polled = DRM_CONNECTOR_POLL_HPD;
-
- intel_encoder->cloneable = false;
-
- INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
- ironlake_panel_vdd_work);
-
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
-
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
- drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
- DRM_MODE_ENCODER_TMDS);
-
- if (IS_HASWELL(dev))
- drm_encoder_helper_add(&intel_encoder->base,
- &intel_dp_helper_funcs_hsw);
- else
- drm_encoder_helper_add(&intel_encoder->base,
- &intel_dp_helper_funcs);
+ INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+ ironlake_panel_vdd_work);
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_sysfs_connector_add(connector);
- if (IS_HASWELL(dev)) {
- intel_encoder->enable = intel_enable_ddi;
- intel_encoder->pre_enable = intel_ddi_pre_enable;
- intel_encoder->disable = intel_disable_ddi;
- intel_encoder->post_disable = intel_ddi_post_disable;
- intel_encoder->get_hw_state = intel_ddi_get_hw_state;
- } else {
- intel_encoder->enable = intel_enable_dp;
- intel_encoder->pre_enable = intel_pre_enable_dp;
- intel_encoder->disable = intel_disable_dp;
- intel_encoder->post_disable = intel_post_disable_dp;
- intel_encoder->get_hw_state = intel_dp_get_hw_state;
- }
- intel_connector->get_hw_state = intel_connector_get_hw_state;
+ if (HAS_DDI(dev))
+ intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
+ else
+ intel_connector->get_hw_state = intel_connector_get_hw_state;
+
/* Set up the DDC bus. */
switch (port) {
} else {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
- intel_dp_encoder_destroy(&intel_dp->base.base);
- intel_dp_destroy(&intel_connector->base);
+ intel_dp_encoder_destroy(&intel_encoder->base);
+ intel_dp_destroy(connector);
return;
}
ironlake_edp_panel_vdd_off(intel_dp, false);
}
- intel_encoder->hot_plug = intel_dp_hot_plug;
-
if (is_edp(intel_dp)) {
intel_panel_init(&intel_connector->panel, fixed_mode);
intel_panel_setup_backlight(connector);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
+{
+ struct intel_digital_port *intel_dig_port;
+ struct intel_encoder *intel_encoder;
+ struct drm_encoder *encoder;
+ struct intel_connector *intel_connector;
+
+ intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL);
+ if (!intel_dig_port)
+ return;
+
+ intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+ if (!intel_connector) {
+ kfree(intel_dig_port);
+ return;
+ }
+
+ intel_encoder = &intel_dig_port->base;
+ encoder = &intel_encoder->base;
+
+ drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
+
+ intel_encoder->enable = intel_enable_dp;
+ intel_encoder->pre_enable = intel_pre_enable_dp;
+ intel_encoder->disable = intel_disable_dp;
+ intel_encoder->post_disable = intel_post_disable_dp;
+ intel_encoder->get_hw_state = intel_dp_get_hw_state;
+
+ intel_dig_port->port = port;
+ intel_dig_port->dp.output_reg = output_reg;
+
+ intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+ intel_encoder->cloneable = false;
+ intel_encoder->hot_plug = intel_dp_hot_plug;
+
+ intel_dp_init_connector(intel_dig_port, intel_connector);
+}
projects / linux-imx.git / blobdiff