}
}
-#define C (((status = I915_READ(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
if (has_aux_irq)
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
else
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
- status = I915_READ(ch_ctl);
+ status = I915_READ_NOTRACE(ch_ctl);
if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
break;
msleep(1);
return false;
}
-struct intel_dp_m_n {
- uint32_t tu;
- uint32_t gmch_m;
- uint32_t gmch_n;
- uint32_t link_m;
- uint32_t link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
- while (*num > 0xffffff || *den > 0xffffff) {
- *num >>= 1;
- *den >>= 1;
- }
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
- int nlanes,
- int pixel_clock,
- int link_clock,
- struct intel_dp_m_n *m_n)
-{
- m_n->tu = 64;
- m_n->gmch_m = (pixel_clock * bpp) >> 3;
- m_n->gmch_n = link_clock * nlanes;
- intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- m_n->link_m = pixel_clock;
- m_n->link_n = link_clock;
- intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int lane_count = 4;
- struct intel_dp_m_n m_n;
+ struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
- intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
}
}
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ /* For a long time we've carried around a ILK-DevA w/a for the
+ * 160MHz clock. If we're really unlucky, it's still required.
+ */
+ DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+
+ I915_WRITE(DP_A, dpa_ctl);
+
+ POSTING_READ(DP_A);
+ udelay(500);
+}
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
+
+ if (is_cpu_edp(intel_dp))
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
}
static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
{
uint32_t signal_levels = 0;
/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
static uint32_t
-intel_dp_signal_levels_hsw(uint8_t train_set)
+intel_hsw_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
}
}
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ uint32_t signal_levels, mask;
+ uint8_t train_set = intel_dp->train_set[0];
+
+ if (IS_HASWELL(dev)) {
+ signal_levels = intel_hsw_signal_levels(train_set);
+ mask = DDI_BUF_EMP_MASK;
+ } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ signal_levels = intel_gen7_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen6_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+ } else {
+ signal_levels = intel_gen4_signal_levels(train_set);
+ mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
+ }
+
+ DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+ *DP = (*DP & ~mask) | signal_levels;
+}
+
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
uint8_t link_status[DP_LINK_STATUS_SIZE];
- uint32_t signal_levels;
-
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(
- intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
- DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n",
- signal_levels);
+
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* Set training pattern 1 */
if (!intel_dp_set_link_train(intel_dp, DP,
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
cr_tries = 0;
channel_eq = false;
for (;;) {
- /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
- uint32_t signal_levels;
uint8_t link_status[DP_LINK_STATUS_SIZE];
if (cr_tries > 5) {
break;
}
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, DP,
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t DP = intel_dp->DP;
/*
}
POSTING_READ(intel_dp->output_reg);
- msleep(17);
+ /* We don't really know why we're doing this */
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
if (HAS_PCH_IBX(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
/* Changes to enable or select take place the vblank
* after being written.
*/
- if (crtc == NULL) {
- /* We can arrive here never having been attached
- * to a CRTC, for instance, due to inheriting
- * random state from the BIOS.
- *
- * If the pipe is not running, play safe and
- * wait for the clocks to stabilise before
- * continuing.
- */
+ if (WARN_ON(crtc == NULL)) {
+ /* We should never try to disable a port without a crtc
+ * attached. For paranoia keep the code around for a
+ * bit. */
POSTING_READ(intel_dp->output_reg);
msleep(50);
} else
- intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
}
DP &= ~DP_AUDIO_OUTPUT_ENABLE;
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
+ char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) == 0)
return false; /* aux transfer failed */
+ hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+ 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+ DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
return false; /* DPCD not present */
ironlake_dp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum drm_connector_status status;
/* Can't disconnect eDP, but you can close the lid... */
return status;
}
+ if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+ return connector_status_disconnected;
+
return intel_dp_detect_dpcd(intel_dp);
}
return intel_ddc_get_modes(connector, adapter);
}
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
enum drm_connector_status status;
struct edid *edid = NULL;
- char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
intel_dp->has_audio = false;
else
status = g4x_dp_detect(intel_dp);
- hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
- 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
- DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
-
if (status != connector_status_connected)
return status;
projects / linux-imx.git / blobdiff