drivers/usb/host/ehci-q.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI hardware queue manipulation ... the core.  QH/QTD manipulation.
  25  *
  26  * Control, bulk, and interrupt traffic all use "qh" lists.  They list "qtd"
  27  * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
  28  * buffers needed for the larger number).  We use one QH per endpoint, queue
  29  * multiple urbs (all three types) per endpoint.  URBs may need several qtds.
  30  *
  31  * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with
  32  * interrupts) needs careful scheduling.  Performance improvements can be
  33  * an ongoing challenge.  That's in "ehci-sched.c".
  34  *
  35  * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
  36  * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
  37  * (b) special fields in qh entries or (c) split iso entries.  TTs will
  38  * buffer low/full speed data so the host collects it at high speed.
  39  */
  40
  41 /*-------------------------------------------------------------------------*/
  42
  43 /* fill a qtd, returning how much of the buffer we were able to queue up */
  44
  45 static int
  46 qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf,
  47                   size_t len, int token, int maxpacket)
  48 {
  49         int     i, count;
  50         u64     addr = buf;
  51
  52         /* one buffer entry per 4K ... first might be short or unaligned */
  53         qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr);
  54         qtd->hw_buf_hi[0] = cpu_to_hc32(ehci, (u32)(addr >> 32));
  55         count = 0x1000 - (buf & 0x0fff);        /* rest of that page */
  56         if (likely (len < count))               /* ... iff needed */
  57                 count = len;
  58         else {
  59                 buf +=  0x1000;
  60                 buf &= ~0x0fff;
  61
  62                 /* per-qtd limit: from 16K to 20K (best alignment) */
  63                 for (i = 1; count < len && i < 5; i++) {
  64                         addr = buf;
  65                         qtd->hw_buf[i] = cpu_to_hc32(ehci, (u32)addr);
  66                         qtd->hw_buf_hi[i] = cpu_to_hc32(ehci,
  67                                         (u32)(addr >> 32));
  68                         buf += 0x1000;
  69                         if ((count + 0x1000) < len)
  70                                 count += 0x1000;
  71                         else
  72                                 count = len;
  73                 }
  74
  75                 /* short packets may only terminate transfers */
  76                 if (count != len)
  77                         count -= (count % maxpacket);
  78         }
  79         qtd->hw_token = cpu_to_hc32(ehci, (count << 16) | token);
  80         qtd->length = count;
  81
  82         return count;
  83 }
  84
  85 /*-------------------------------------------------------------------------*/
  86
  87 static inline void
  88 qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
  89 {
  90         struct ehci_qh_hw *hw = qh->hw;
  91
  92         /* writes to an active overlay are unsafe */
  93         BUG_ON(qh->qh_state != QH_STATE_IDLE);
  94
  95         hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
  96         hw->hw_alt_next = EHCI_LIST_END(ehci);
  97
  98         /* Except for control endpoints, we make hardware maintain data
  99          * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
 100          * and set the pseudo-toggle in udev. Only usb_clear_halt() will
 101          * ever clear it.
 102          */
 103         if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
 104                 unsigned        is_out, epnum;
 105
 106                 is_out = qh->is_out;
 107                 epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
 108                 if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
 109                         hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
 110                         usb_settoggle (qh->dev, epnum, is_out, 1);
 111                 }
 112         }
 113
 114         hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
 115 }
 116
 117 /* if it weren't for a common silicon quirk (writing the dummy into the qh
 118  * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
 119  * recovery (including urb dequeue) would need software changes to a QH...
 120  */
 121 static void
 122 qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 123 {
 124         struct ehci_qtd *qtd;
 125
 126         if (list_empty (&qh->qtd_list))
 127                 qtd = qh->dummy;
 128         else {
 129                 qtd = list_entry (qh->qtd_list.next,
 130                                 struct ehci_qtd, qtd_list);
 131                 /* first qtd may already be partially processed */
 132                 if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
 133                         qtd = NULL;
 134         }
 135
 136         if (qtd)
 137                 qh_update (ehci, qh, qtd);
 138 }
 139
 140 /*-------------------------------------------------------------------------*/
 141
 142 static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
 143
 144 static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
 145                 struct usb_host_endpoint *ep)
 146 {
 147         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 148         struct ehci_qh          *qh = ep->hcpriv;
 149         unsigned long           flags;
 150
 151         spin_lock_irqsave(&ehci->lock, flags);
 152         qh->clearing_tt = 0;
 153         if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
 154                         && ehci->rh_state == EHCI_RH_RUNNING)
 155                 qh_link_async(ehci, qh);
 156         spin_unlock_irqrestore(&ehci->lock, flags);
 157 }
 158
 159 static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
 160                 struct urb *urb, u32 token)
 161 {
 162
 163         /* If an async split transaction gets an error or is unlinked,
 164          * the TT buffer may be left in an indeterminate state.  We
 165          * have to clear the TT buffer.
 166          *
 167          * Note: this routine is never called for Isochronous transfers.
 168          */
 169         if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
 170 #ifdef DEBUG
 171                 struct usb_device *tt = urb->dev->tt->hub;
 172                 dev_dbg(&tt->dev,
 173                         "clear tt buffer port %d, a%d ep%d t%08x\n",
 174                         urb->dev->ttport, urb->dev->devnum,
 175                         usb_pipeendpoint(urb->pipe), token);
 176 #endif /* DEBUG */
 177                 if (!ehci_is_TDI(ehci)
 178                                 || urb->dev->tt->hub !=
 179                                    ehci_to_hcd(ehci)->self.root_hub) {
 180                         if (usb_hub_clear_tt_buffer(urb) == 0)
 181                                 qh->clearing_tt = 1;
 182                 } else {
 183
 184                         /* REVISIT ARC-derived cores don't clear the root
 185                          * hub TT buffer in this way...
 186                          */
 187                 }
 188         }
 189 }
 190
 191 static int qtd_copy_status (
 192         struct ehci_hcd *ehci,
 193         struct urb *urb,
 194         size_t length,
 195         u32 token
 196 )
 197 {
 198         int     status = -EINPROGRESS;
 199
 200         /* count IN/OUT bytes, not SETUP (even short packets) */
 201         if (likely (QTD_PID (token) != 2))
 202                 urb->actual_length += length - QTD_LENGTH (token);
 203
 204         /* don't modify error codes */
 205         if (unlikely(urb->unlinked))
 206                 return status;
 207
 208         /* force cleanup after short read; not always an error */
 209         if (unlikely (IS_SHORT_READ (token)))
 210                 status = -EREMOTEIO;
 211
 212         /* serious "can't proceed" faults reported by the hardware */
 213         if (token & QTD_STS_HALT) {
 214                 if (token & QTD_STS_BABBLE) {
 215                         /* FIXME "must" disable babbling device's port too */
 216                         status = -EOVERFLOW;
 217                 /* CERR nonzero + halt --> stall */
 218                 } else if (QTD_CERR(token)) {
 219                         status = -EPIPE;
 220
 221                 /* In theory, more than one of the following bits can be set
 222                  * since they are sticky and the transaction is retried.
 223                  * Which to test first is rather arbitrary.
 224                  */
 225                 } else if (token & QTD_STS_MMF) {
 226                         /* fs/ls interrupt xfer missed the complete-split */
 227                         status = -EPROTO;
 228                 } else if (token & QTD_STS_DBE) {
 229                         status = (QTD_PID (token) == 1) /* IN ? */
 230                                 ? -ENOSR  /* hc couldn't read data */
 231                                 : -ECOMM; /* hc couldn't write data */
 232                 } else if (token & QTD_STS_XACT) {
 233                         /* timeout, bad CRC, wrong PID, etc */
 234                         ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
 235                                 urb->dev->devpath,
 236                                 usb_pipeendpoint(urb->pipe),
 237                                 usb_pipein(urb->pipe) ? "in" : "out");
 238                         status = -EPROTO;
 239                 } else {        /* unknown */
 240                         status = -EPROTO;
 241                 }
 242
 243                 ehci_vdbg (ehci,
 244                         "dev%d ep%d%s qtd token %08x --> status %d\n",
 245                         usb_pipedevice (urb->pipe),
 246                         usb_pipeendpoint (urb->pipe),
 247                         usb_pipein (urb->pipe) ? "in" : "out",
 248                         token, status);
 249         }
 250
 251         return status;
 252 }
 253
 254 static void
 255 ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
 256 __releases(ehci->lock)
 257 __acquires(ehci->lock)
 258 {
 259         if (likely (urb->hcpriv != NULL)) {
 260                 struct ehci_qh  *qh = (struct ehci_qh *) urb->hcpriv;
 261
 262                 /* S-mask in a QH means it's an interrupt urb */
 263                 if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
 264
 265                         /* ... update hc-wide periodic stats (for usbfs) */
 266                         ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
 267                 }
 268                 qh_put (qh);
 269         }
 270
 271         if (unlikely(urb->unlinked)) {
 272                 COUNT(ehci->stats.unlink);
 273         } else {
 274                 /* report non-error and short read status as zero */
 275                 if (status == -EINPROGRESS || status == -EREMOTEIO)
 276                         status = 0;
 277                 COUNT(ehci->stats.complete);
 278         }
 279
 280 #ifdef EHCI_URB_TRACE
 281         ehci_dbg (ehci,
 282                 "%s %s urb %p ep%d%s status %d len %d/%d\n",
 283                 __func__, urb->dev->devpath, urb,
 284                 usb_pipeendpoint (urb->pipe),
 285                 usb_pipein (urb->pipe) ? "in" : "out",
 286                 status,
 287                 urb->actual_length, urb->transfer_buffer_length);
 288 #endif
 289
 290         /* complete() can reenter this HCD */
 291         usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
 292         spin_unlock (&ehci->lock);
 293         usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
 294         spin_lock (&ehci->lock);
 295 }
 296
 297 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
 298 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
 299
 300 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
 301
 302 /*
 303  * Process and free completed qtds for a qh, returning URBs to drivers.
 304  * Chases up to qh->hw_current.  Returns number of completions called,
 305  * indicating how much "real" work we did.
 306  */
 307 static unsigned
 308 qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 309 {
 310         struct ehci_qtd         *last, *end = qh->dummy;
 311         struct list_head        *entry, *tmp;
 312         int                     last_status;
 313         int                     stopped;
 314         unsigned                count = 0;
 315         u8                      state;
 316         struct ehci_qh_hw       *hw = qh->hw;
 317
 318         if (unlikely (list_empty (&qh->qtd_list)))
 319                 return count;
 320
 321         /* completions (or tasks on other cpus) must never clobber HALT
 322          * till we've gone through and cleaned everything up, even when
 323          * they add urbs to this qh's queue or mark them for unlinking.
 324          *
 325          * NOTE:  unlinking expects to be done in queue order.
 326          *
 327          * It's a bug for qh->qh_state to be anything other than
 328          * QH_STATE_IDLE, unless our caller is scan_async() or
 329          * scan_periodic().
 330          */
 331         state = qh->qh_state;
 332         qh->qh_state = QH_STATE_COMPLETING;
 333         stopped = (state == QH_STATE_IDLE);
 334
 335  rescan:
 336         last = NULL;
 337         last_status = -EINPROGRESS;
 338         qh->needs_rescan = 0;
 339
 340         /* remove de-activated QTDs from front of queue.
 341          * after faults (including short reads), cleanup this urb
 342          * then let the queue advance.
 343          * if queue is stopped, handles unlinks.
 344          */
 345         list_for_each_safe (entry, tmp, &qh->qtd_list) {
 346                 struct ehci_qtd *qtd;
 347                 struct urb      *urb;
 348                 u32             token = 0;
 349
 350                 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
 351                 urb = qtd->urb;
 352
 353                 /* clean up any state from previous QTD ...*/
 354                 if (last) {
 355                         if (likely (last->urb != urb)) {
 356                                 ehci_urb_done(ehci, last->urb, last_status);
 357                                 count++;
 358                                 last_status = -EINPROGRESS;
 359                         }
 360                         ehci_qtd_free (ehci, last);
 361                         last = NULL;
 362                 }
 363
 364                 /* ignore urbs submitted during completions we reported */
 365                 if (qtd == end)
 366                         break;
 367
 368                 /* hardware copies qtd out of qh overlay */
 369                 rmb ();
 370                 token = hc32_to_cpu(ehci, qtd->hw_token);
 371
 372                 /* always clean up qtds the hc de-activated */
 373  retry_xacterr:
 374                 if ((token & QTD_STS_ACTIVE) == 0) {
 375
 376                         /* Report Data Buffer Error: non-fatal but useful */
 377                         if (token & QTD_STS_DBE)
 378                                 ehci_dbg(ehci,
 379                                         "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
 380                                         urb,
 381                                         usb_endpoint_num(&urb->ep->desc),
 382                                         usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
 383                                         urb->transfer_buffer_length,
 384                                         qtd,
 385                                         qh);
 386
 387                         /* on STALL, error, and short reads this urb must
 388                          * complete and all its qtds must be recycled.
 389                          */
 390                         if ((token & QTD_STS_HALT) != 0) {
 391
 392                                 /* retry transaction errors until we
 393                                  * reach the software xacterr limit
 394                                  */
 395                                 if ((token & QTD_STS_XACT) &&
 396                                                 QTD_CERR(token) == 0 &&
 397                                                 ++qh->xacterrs < QH_XACTERR_MAX &&
 398                                                 !urb->unlinked) {
 399                                         ehci_dbg(ehci,
 400         "detected XactErr len %zu/%zu retry %d\n",
 401         qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
 402
 403                                         /* reset the token in the qtd and the
 404                                          * qh overlay (which still contains
 405                                          * the qtd) so that we pick up from
 406                                          * where we left off
 407                                          */
 408                                         token &= ~QTD_STS_HALT;
 409                                         token |= QTD_STS_ACTIVE |
 410                                                         (EHCI_TUNE_CERR << 10);
 411                                         qtd->hw_token = cpu_to_hc32(ehci,
 412                                                         token);
 413                                         wmb();
 414                                         hw->hw_token = cpu_to_hc32(ehci,
 415                                                         token);
 416                                         goto retry_xacterr;
 417                                 }
 418                                 stopped = 1;
 419
 420                         /* magic dummy for some short reads; qh won't advance.
 421                          * that silicon quirk can kick in with this dummy too.
 422                          *
 423                          * other short reads won't stop the queue, including
 424                          * control transfers (status stage handles that) or
 425                          * most other single-qtd reads ... the queue stops if
 426                          * URB_SHORT_NOT_OK was set so the driver submitting
 427                          * the urbs could clean it up.
 428                          */
 429                         } else if (IS_SHORT_READ (token)
 430                                         && !(qtd->hw_alt_next
 431                                                 & EHCI_LIST_END(ehci))) {
 432                                 stopped = 1;
 433                         }
 434
 435                 /* stop scanning when we reach qtds the hc is using */
 436                 } else if (likely (!stopped
 437                                 && ehci->rh_state == EHCI_RH_RUNNING)) {
 438                         break;
 439
 440                 /* scan the whole queue for unlinks whenever it stops */
 441                 } else {
 442                         stopped = 1;
 443
 444                         /* cancel everything if we halt, suspend, etc */
 445                         if (ehci->rh_state != EHCI_RH_RUNNING)
 446                                 last_status = -ESHUTDOWN;
 447
 448                         /* this qtd is active; skip it unless a previous qtd
 449                          * for its urb faulted, or its urb was canceled.
 450                          */
 451                         else if (last_status == -EINPROGRESS && !urb->unlinked)
 452                                 continue;
 453
 454                         /* qh unlinked; token in overlay may be most current */
 455                         if (state == QH_STATE_IDLE
 456                                         && cpu_to_hc32(ehci, qtd->qtd_dma)
 457                                                 == hw->hw_current) {
 458                                 token = hc32_to_cpu(ehci, hw->hw_token);
 459
 460                                 /* An unlink may leave an incomplete
 461                                  * async transaction in the TT buffer.
 462                                  * We have to clear it.
 463                                  */
 464                                 ehci_clear_tt_buffer(ehci, qh, urb, token);
 465                         }
 466                 }
 467
 468                 /* unless we already know the urb's status, collect qtd status
 469                  * and update count of bytes transferred.  in common short read
 470                  * cases with only one data qtd (including control transfers),
 471                  * queue processing won't halt.  but with two or more qtds (for
 472                  * example, with a 32 KB transfer), when the first qtd gets a
 473                  * short read the second must be removed by hand.
 474                  */
 475                 if (last_status == -EINPROGRESS) {
 476                         last_status = qtd_copy_status(ehci, urb,
 477                                         qtd->length, token);
 478                         if (last_status == -EREMOTEIO
 479                                         && (qtd->hw_alt_next
 480                                                 & EHCI_LIST_END(ehci)))
 481                                 last_status = -EINPROGRESS;
 482
 483                         /* As part of low/full-speed endpoint-halt processing
 484                          * we must clear the TT buffer (11.17.5).
 485                          */
 486                         if (unlikely(last_status != -EINPROGRESS &&
 487                                         last_status != -EREMOTEIO)) {
 488                                 /* The TT's in some hubs malfunction when they
 489                                  * receive this request following a STALL (they
 490                                  * stop sending isochronous packets).  Since a
 491                                  * STALL can't leave the TT buffer in a busy
 492                                  * state (if you believe Figures 11-48 - 11-51
 493                                  * in the USB 2.0 spec), we won't clear the TT
 494                                  * buffer in this case.  Strictly speaking this
 495                                  * is a violation of the spec.
 496                                  */
 497                                 if (last_status != -EPIPE)
 498                                         ehci_clear_tt_buffer(ehci, qh, urb,
 499                                                         token);
 500                         }
 501                 }
 502
 503                 /* if we're removing something not at the queue head,
 504                  * patch the hardware queue pointer.
 505                  */
 506                 if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
 507                         last = list_entry (qtd->qtd_list.prev,
 508                                         struct ehci_qtd, qtd_list);
 509                         last->hw_next = qtd->hw_next;
 510                 }
 511
 512                 /* remove qtd; it's recycled after possible urb completion */
 513                 list_del (&qtd->qtd_list);
 514                 last = qtd;
 515
 516                 /* reinit the xacterr counter for the next qtd */
 517                 qh->xacterrs = 0;
 518         }
 519
 520         /* last urb's completion might still need calling */
 521         if (likely (last != NULL)) {
 522                 ehci_urb_done(ehci, last->urb, last_status);
 523                 count++;
 524                 ehci_qtd_free (ehci, last);
 525         }
 526
 527         /* Do we need to rescan for URBs dequeued during a giveback? */
 528         if (unlikely(qh->needs_rescan)) {
 529                 /* If the QH is already unlinked, do the rescan now. */
 530                 if (state == QH_STATE_IDLE)
 531                         goto rescan;
 532
 533                 /* Otherwise we have to wait until the QH is fully unlinked.
 534                  * Our caller will start an unlink if qh->needs_rescan is
 535                  * set.  But if an unlink has already started, nothing needs
 536                  * to be done.
 537                  */
 538                 if (state != QH_STATE_LINKED)
 539                         qh->needs_rescan = 0;
 540         }
 541
 542         /* restore original state; caller must unlink or relink */
 543         qh->qh_state = state;
 544
 545         /* be sure the hardware's done with the qh before refreshing
 546          * it after fault cleanup, or recovering from silicon wrongly
 547          * overlaying the dummy qtd (which reduces DMA chatter).
 548          */
 549         if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) {
 550                 switch (state) {
 551                 case QH_STATE_IDLE:
 552                         qh_refresh(ehci, qh);
 553                         break;
 554                 case QH_STATE_LINKED:
 555                         /* We won't refresh a QH that's linked (after the HC
 556                          * stopped the queue).  That avoids a race:
 557                          *  - HC reads first part of QH;
 558                          *  - CPU updates that first part and the token;
 559                          *  - HC reads rest of that QH, including token
 560                          * Result:  HC gets an inconsistent image, and then
 561                          * DMAs to/from the wrong memory (corrupting it).
 562                          *
 563                          * That should be rare for interrupt transfers,
 564                          * except maybe high bandwidth ...
 565                          */
 566
 567                         /* Tell the caller to start an unlink */
 568                         qh->needs_rescan = 1;
 569                         break;
 570                 /* otherwise, unlink already started */
 571                 }
 572         }
 573
 574         return count;
 575 }
 576
 577 /*-------------------------------------------------------------------------*/
 578
 579 // high bandwidth multiplier, as encoded in highspeed endpoint descriptors
 580 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
 581 // ... and packet size, for any kind of endpoint descriptor
 582 #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
 583
 584 /*
 585  * reverse of qh_urb_transaction:  free a list of TDs.
 586  * used for cleanup after errors, before HC sees an URB's TDs.
 587  */
 588 static void qtd_list_free (
 589         struct ehci_hcd         *ehci,
 590         struct urb              *urb,
 591         struct list_head        *qtd_list
 592 ) {
 593         struct list_head        *entry, *temp;
 594
 595         list_for_each_safe (entry, temp, qtd_list) {
 596                 struct ehci_qtd *qtd;
 597
 598                 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
 599                 list_del (&qtd->qtd_list);
 600                 ehci_qtd_free (ehci, qtd);
 601         }
 602 }
 603
 604 /*
 605  * create a list of filled qtds for this URB; won't link into qh.
 606  */
 607 static struct list_head *
 608 qh_urb_transaction (
 609         struct ehci_hcd         *ehci,
 610         struct urb              *urb,
 611         struct list_head        *head,
 612         gfp_t                   flags
 613 ) {
 614         struct ehci_qtd         *qtd, *qtd_prev;
 615         dma_addr_t              buf;
 616         int                     len, this_sg_len, maxpacket;
 617         int                     is_input;
 618         u32                     token;
 619         int                     i;
 620         struct scatterlist      *sg;
 621
 622         /*
 623          * URBs map to sequences of QTDs:  one logical transaction
 624          */
 625         qtd = ehci_qtd_alloc (ehci, flags);
 626         if (unlikely (!qtd))
 627                 return NULL;
 628         list_add_tail (&qtd->qtd_list, head);
 629         qtd->urb = urb;
 630
 631         token = QTD_STS_ACTIVE;
 632         token |= (EHCI_TUNE_CERR << 10);
 633         /* for split transactions, SplitXState initialized to zero */
 634
 635         len = urb->transfer_buffer_length;
 636         is_input = usb_pipein (urb->pipe);
 637         if (usb_pipecontrol (urb->pipe)) {
 638                 /* SETUP pid */
 639                 qtd_fill(ehci, qtd, urb->setup_dma,
 640                                 sizeof (struct usb_ctrlrequest),
 641                                 token | (2 /* "setup" */ << 8), 8);
 642
 643                 /* ... and always at least one more pid */
 644                 token ^= QTD_TOGGLE;
 645                 qtd_prev = qtd;
 646                 qtd = ehci_qtd_alloc (ehci, flags);
 647                 if (unlikely (!qtd))
 648                         goto cleanup;
 649                 qtd->urb = urb;
 650                 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 651                 list_add_tail (&qtd->qtd_list, head);
 652
 653                 /* for zero length DATA stages, STATUS is always IN */
 654                 if (len == 0)
 655                         token |= (1 /* "in" */ << 8);
 656         }
 657
 658         /*
 659          * data transfer stage:  buffer setup
 660          */
 661         i = urb->num_sgs;
 662         if (len > 0 && i > 0) {
 663                 sg = urb->sg;
 664                 buf = sg_dma_address(sg);
 665
 666                 /* urb->transfer_buffer_length may be smaller than the
 667                  * size of the scatterlist (or vice versa)
 668                  */
 669                 this_sg_len = min_t(int, sg_dma_len(sg), len);
 670         } else {
 671                 sg = NULL;
 672                 buf = urb->transfer_dma;
 673                 this_sg_len = len;
 674         }
 675
 676         if (is_input)
 677                 token |= (1 /* "in" */ << 8);
 678         /* else it's already initted to "out" pid (0 << 8) */
 679
 680         maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
 681
 682         /*
 683          * buffer gets wrapped in one or more qtds;
 684          * last one may be "short" (including zero len)
 685          * and may serve as a control status ack
 686          */
 687         for (;;) {
 688                 int this_qtd_len;
 689
 690                 this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token,
 691                                 maxpacket);
 692                 this_sg_len -= this_qtd_len;
 693                 len -= this_qtd_len;
 694                 buf += this_qtd_len;
 695
 696                 /*
 697                  * short reads advance to a "magic" dummy instead of the next
 698                  * qtd ... that forces the queue to stop, for manual cleanup.
 699                  * (this will usually be overridden later.)
 700                  */
 701                 if (is_input)
 702                         qtd->hw_alt_next = ehci->async->hw->hw_alt_next;
 703
 704                 /* qh makes control packets use qtd toggle; maybe switch it */
 705                 if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
 706                         token ^= QTD_TOGGLE;
 707
 708                 if (likely(this_sg_len <= 0)) {
 709                         if (--i <= 0 || len <= 0)
 710                                 break;
 711                         sg = sg_next(sg);
 712                         buf = sg_dma_address(sg);
 713                         this_sg_len = min_t(int, sg_dma_len(sg), len);
 714                 }
 715
 716                 qtd_prev = qtd;
 717                 qtd = ehci_qtd_alloc (ehci, flags);
 718                 if (unlikely (!qtd))
 719                         goto cleanup;
 720                 qtd->urb = urb;
 721                 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 722                 list_add_tail (&qtd->qtd_list, head);
 723         }
 724
 725         /*
 726          * unless the caller requires manual cleanup after short reads,
 727          * have the alt_next mechanism keep the queue running after the
 728          * last data qtd (the only one, for control and most other cases).
 729          */
 730         if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
 731                                 || usb_pipecontrol (urb->pipe)))
 732                 qtd->hw_alt_next = EHCI_LIST_END(ehci);
 733
 734         /*
 735          * control requests may need a terminating data "status" ack;
 736          * other OUT ones may need a terminating short packet
 737          * (zero length).
 738          */
 739         if (likely (urb->transfer_buffer_length != 0)) {
 740                 int     one_more = 0;
 741
 742                 if (usb_pipecontrol (urb->pipe)) {
 743                         one_more = 1;
 744                         token ^= 0x0100;        /* "in" <--> "out"  */
 745                         token |= QTD_TOGGLE;    /* force DATA1 */
 746                 } else if (usb_pipeout(urb->pipe)
 747                                 && (urb->transfer_flags & URB_ZERO_PACKET)
 748                                 && !(urb->transfer_buffer_length % maxpacket)) {
 749                         one_more = 1;
 750                 }
 751                 if (one_more) {
 752                         qtd_prev = qtd;
 753                         qtd = ehci_qtd_alloc (ehci, flags);
 754                         if (unlikely (!qtd))
 755                                 goto cleanup;
 756                         qtd->urb = urb;
 757                         qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 758                         list_add_tail (&qtd->qtd_list, head);
 759
 760                         /* never any data in such packets */
 761                         qtd_fill(ehci, qtd, 0, 0, token, 0);
 762                 }
 763         }
 764
 765         /* by default, enable interrupt on urb completion */
 766         if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT)))
 767                 qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC);
 768         return head;
 769
 770 cleanup:
 771         qtd_list_free (ehci, urb, head);
 772         return NULL;
 773 }
 774
 775 /*-------------------------------------------------------------------------*/
 776
 777 // Would be best to create all qh's from config descriptors,
 778 // when each interface/altsetting is established.  Unlink
 779 // any previous qh and cancel its urbs first; endpoints are
 780 // implicitly reset then (data toggle too).
 781 // That'd mean updating how usbcore talks to HCDs. (2.7?)
 782
 783
 784 /*
 785  * Each QH holds a qtd list; a QH is used for everything except iso.
 786  *
 787  * For interrupt urbs, the scheduler must set the microframe scheduling
 788  * mask(s) each time the QH gets scheduled.  For highspeed, that's
 789  * just one microframe in the s-mask.  For split interrupt transactions
 790  * there are additional complications: c-mask, maybe FSTNs.
 791  */
 792 static struct ehci_qh *
 793 qh_make (
 794         struct ehci_hcd         *ehci,
 795         struct urb              *urb,
 796         gfp_t                   flags
 797 ) {
 798         struct ehci_qh          *qh = ehci_qh_alloc (ehci, flags);
 799         u32                     info1 = 0, info2 = 0;
 800         int                     is_input, type;
 801         int                     maxp = 0;
 802         struct usb_tt           *tt = urb->dev->tt;
 803         struct ehci_qh_hw       *hw;
 804
 805         if (!qh)
 806                 return qh;
 807
 808         /*
 809          * init endpoint/device data for this QH
 810          */
 811         info1 |= usb_pipeendpoint (urb->pipe) << 8;
 812         info1 |= usb_pipedevice (urb->pipe) << 0;
 813
 814         is_input = usb_pipein (urb->pipe);
 815         type = usb_pipetype (urb->pipe);
 816         maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input);
 817
 818         /* 1024 byte maxpacket is a hardware ceiling.  High bandwidth
 819          * acts like up to 3KB, but is built from smaller packets.
 820          */
 821         if (max_packet(maxp) > 1024) {
 822                 ehci_dbg(ehci, "bogus qh maxpacket %d\n", max_packet(maxp));
 823                 goto done;
 824         }
 825
 826         /* Compute interrupt scheduling parameters just once, and save.
 827          * - allowing for high bandwidth, how many nsec/uframe are used?
 828          * - split transactions need a second CSPLIT uframe; same question
 829          * - splits also need a schedule gap (for full/low speed I/O)
 830          * - qh has a polling interval
 831          *
 832          * For control/bulk requests, the HC or TT handles these.
 833          */
 834         if (type == PIPE_INTERRUPT) {
 835                 qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
 836                                 is_input, 0,
 837                                 hb_mult(maxp) * max_packet(maxp)));
 838                 qh->start = NO_FRAME;
 839                 qh->stamp = ehci->periodic_stamp;
 840
 841                 if (urb->dev->speed == USB_SPEED_HIGH) {
 842                         qh->c_usecs = 0;
 843                         qh->gap_uf = 0;
 844
 845                         qh->period = urb->interval >> 3;
 846                         if (qh->period == 0 && urb->interval != 1) {
 847                                 /* NOTE interval 2 or 4 uframes could work.
 848                                  * But interval 1 scheduling is simpler, and
 849                                  * includes high bandwidth.
 850                                  */
 851                                 urb->interval = 1;
 852                         } else if (qh->period > ehci->periodic_size) {
 853                                 qh->period = ehci->periodic_size;
 854                                 urb->interval = qh->period << 3;
 855                         }
 856                 } else {
 857                         int             think_time;
 858
 859                         /* gap is f(FS/LS transfer times) */
 860                         qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
 861                                         is_input, 0, maxp) / (125 * 1000);
 862
 863                         /* FIXME this just approximates SPLIT/CSPLIT times */
 864                         if (is_input) {         // SPLIT, gap, CSPLIT+DATA
 865                                 qh->c_usecs = qh->usecs + HS_USECS (0);
 866                                 qh->usecs = HS_USECS (1);
 867                         } else {                // SPLIT+DATA, gap, CSPLIT
 868                                 qh->usecs += HS_USECS (1);
 869                                 qh->c_usecs = HS_USECS (0);
 870                         }
 871
 872                         think_time = tt ? tt->think_time : 0;
 873                         qh->tt_usecs = NS_TO_US (think_time +
 874                                         usb_calc_bus_time (urb->dev->speed,
 875                                         is_input, 0, max_packet (maxp)));
 876                         qh->period = urb->interval;
 877                         if (qh->period > ehci->periodic_size) {
 878                                 qh->period = ehci->periodic_size;
 879                                 urb->interval = qh->period;
 880                         }
 881                 }
 882         }
 883
 884         /* support for tt scheduling, and access to toggles */
 885         qh->dev = urb->dev;
 886
 887         /* using TT? */
 888         switch (urb->dev->speed) {
 889         case USB_SPEED_LOW:
 890                 info1 |= (1 << 12);     /* EPS "low" */
 891                 /* FALL THROUGH */
 892
 893         case USB_SPEED_FULL:
 894                 /* EPS 0 means "full" */
 895                 if (type != PIPE_INTERRUPT)
 896                         info1 |= (EHCI_TUNE_RL_TT << 28);
 897                 if (type == PIPE_CONTROL) {
 898                         info1 |= (1 << 27);     /* for TT */
 899                         info1 |= 1 << 14;       /* toggle from qtd */
 900                 }
 901                 info1 |= maxp << 16;
 902
 903                 info2 |= (EHCI_TUNE_MULT_TT << 30);
 904
 905                 /* Some Freescale processors have an erratum in which the
 906                  * port number in the queue head was 0..N-1 instead of 1..N.
 907                  */
 908                 if (ehci_has_fsl_portno_bug(ehci))
 909                         info2 |= (urb->dev->ttport-1) << 23;
 910                 else
 911                         info2 |= urb->dev->ttport << 23;
 912
 913                 /* set the address of the TT; for TDI's integrated
 914                  * root hub tt, leave it zeroed.
 915                  */
 916                 if (tt && tt->hub != ehci_to_hcd(ehci)->self.root_hub)
 917                         info2 |= tt->hub->devnum << 16;
 918
 919                 /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
 920
 921                 break;
 922
 923         case USB_SPEED_HIGH:            /* no TT involved */
 924                 info1 |= (2 << 12);     /* EPS "high" */
 925                 if (type == PIPE_CONTROL) {
 926                         info1 |= (EHCI_TUNE_RL_HS << 28);
 927                         info1 |= 64 << 16;      /* usb2 fixed maxpacket */
 928                         info1 |= 1 << 14;       /* toggle from qtd */
 929                         info2 |= (EHCI_TUNE_MULT_HS << 30);
 930                 } else if (type == PIPE_BULK) {
 931                         info1 |= (EHCI_TUNE_RL_HS << 28);
 932                         /* The USB spec says that high speed bulk endpoints
 933                          * always use 512 byte maxpacket.  But some device
 934                          * vendors decided to ignore that, and MSFT is happy
 935                          * to help them do so.  So now people expect to use
 936                          * such nonconformant devices with Linux too; sigh.
 937                          */
 938                         info1 |= max_packet(maxp) << 16;
 939                         info2 |= (EHCI_TUNE_MULT_HS << 30);
 940                 } else {                /* PIPE_INTERRUPT */
 941                         info1 |= max_packet (maxp) << 16;
 942                         info2 |= hb_mult (maxp) << 30;
 943                 }
 944                 break;
 945         default:
 946                 dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
 947 done:
 948                 qh_put (qh);
 949                 return NULL;
 950         }
 951
 952         /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
 953
 954         /* init as live, toggle clear, advance to dummy */
 955         qh->qh_state = QH_STATE_IDLE;
 956         hw = qh->hw;
 957         hw->hw_info1 = cpu_to_hc32(ehci, info1);
 958         hw->hw_info2 = cpu_to_hc32(ehci, info2);
 959         qh->is_out = !is_input;
 960         usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 961         qh_refresh (ehci, qh);
 962         return qh;
 963 }
 964
 965 /*-------------------------------------------------------------------------*/
 966
 967 /* move qh (and its qtds) onto async queue; maybe enable queue.  */
 968
 969 static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 970 {
 971         __hc32          dma = QH_NEXT(ehci, qh->qh_dma);
 972         struct ehci_qh  *head;
 973
 974         /* Don't link a QH if there's a Clear-TT-Buffer pending */
 975         if (unlikely(qh->clearing_tt))
 976                 return;
 977
 978         WARN_ON(qh->qh_state != QH_STATE_IDLE);
 979
 980         /* (re)start the async schedule? */
 981         head = ehci->async;
 982         timer_action_done (ehci, TIMER_ASYNC_OFF);
 983         if (!head->qh_next.qh) {
 984                 u32     cmd = ehci_readl(ehci, &ehci->regs->command);
 985
 986                 if (!(cmd & CMD_ASE)) {
 987                         /* in case a clear of CMD_ASE didn't take yet */
 988                         (void)handshake(ehci, &ehci->regs->status,
 989                                         STS_ASS, 0, 150);
 990                         cmd |= CMD_ASE;
 991                         ehci_writel(ehci, cmd, &ehci->regs->command);
 992                         /* posted write need not be known to HC yet ... */
 993                 }
 994         }
 995
 996         /* clear halt and/or toggle; and maybe recover from silicon quirk */
 997         qh_refresh(ehci, qh);
 998
 999         /* splice right after start */
1000         qh->qh_next = head->qh_next;
1001         qh->hw->hw_next = head->hw->hw_next;
1002         wmb ();
1003
1004         head->qh_next.qh = qh;
1005         head->hw->hw_next = dma;
1006
1007         qh_get(qh);
1008         qh->xacterrs = 0;
1009         qh->qh_state = QH_STATE_LINKED;
1010         /* qtd completions reported later by interrupt */
1011 }
1012
1013 /*-------------------------------------------------------------------------*/
1014
1015 /*
1016  * For control/bulk/interrupt, return QH with these TDs appended.
1017  * Allocates and initializes the QH if necessary.
1018  * Returns null if it can't allocate a QH it needs to.
1019  * If the QH has TDs (urbs) already, that's great.
1020  */
1021 static struct ehci_qh *qh_append_tds (
1022         struct ehci_hcd         *ehci,
1023         struct urb              *urb,
1024         struct list_head        *qtd_list,
1025         int                     epnum,
1026         void                    **ptr
1027 )
1028 {
1029         struct ehci_qh          *qh = NULL;
1030         __hc32                  qh_addr_mask = cpu_to_hc32(ehci, 0x7f);
1031
1032         qh = (struct ehci_qh *) *ptr;
1033         if (unlikely (qh == NULL)) {
1034                 /* can't sleep here, we have ehci->lock... */
1035                 qh = qh_make (ehci, urb, GFP_ATOMIC);
1036                 *ptr = qh;
1037         }
1038         if (likely (qh != NULL)) {
1039                 struct ehci_qtd *qtd;
1040
1041                 if (unlikely (list_empty (qtd_list)))
1042                         qtd = NULL;
1043                 else
1044                         qtd = list_entry (qtd_list->next, struct ehci_qtd,
1045                                         qtd_list);
1046
1047                 /* control qh may need patching ... */
1048                 if (unlikely (epnum == 0)) {
1049
1050                         /* usb_reset_device() briefly reverts to address 0 */
1051                         if (usb_pipedevice (urb->pipe) == 0)
1052                                 qh->hw->hw_info1 &= ~qh_addr_mask;
1053                 }
1054
1055                 /* just one way to queue requests: swap with the dummy qtd.
1056                  * only hc or qh_refresh() ever modify the overlay.
1057                  */
1058                 if (likely (qtd != NULL)) {
1059                         struct ehci_qtd         *dummy;
1060                         dma_addr_t              dma;
1061                         __hc32                  token;
1062
1063                         /* to avoid racing the HC, use the dummy td instead of
1064                          * the first td of our list (becomes new dummy).  both
1065                          * tds stay deactivated until we're done, when the
1066                          * HC is allowed to fetch the old dummy (4.10.2).
1067                          */
1068                         token = qtd->hw_token;
1069                         qtd->hw_token = HALT_BIT(ehci);
1070
1071                         dummy = qh->dummy;
1072
1073                         dma = dummy->qtd_dma;
1074                         *dummy = *qtd;
1075                         dummy->qtd_dma = dma;
1076
1077                         list_del (&qtd->qtd_list);
1078                         list_add (&dummy->qtd_list, qtd_list);
1079                         list_splice_tail(qtd_list, &qh->qtd_list);
1080
1081                         ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
1082                         qh->dummy = qtd;
1083
1084                         /* hc must see the new dummy at list end */
1085                         dma = qtd->qtd_dma;
1086                         qtd = list_entry (qh->qtd_list.prev,
1087                                         struct ehci_qtd, qtd_list);
1088                         qtd->hw_next = QTD_NEXT(ehci, dma);
1089
1090                         /* let the hc process these next qtds */
1091                         wmb ();
1092                         dummy->hw_token = token;
1093
1094                         urb->hcpriv = qh_get (qh);
1095                 }
1096         }
1097         return qh;
1098 }
1099
1100 /*-------------------------------------------------------------------------*/
1101
1102 static int
1103 submit_async (
1104         struct ehci_hcd         *ehci,
1105         struct urb              *urb,
1106         struct list_head        *qtd_list,
1107         gfp_t                   mem_flags
1108 ) {
1109         int                     epnum;
1110         unsigned long           flags;
1111         struct ehci_qh          *qh = NULL;
1112         int                     rc;
1113
1114         epnum = urb->ep->desc.bEndpointAddress;
1115
1116 #ifdef EHCI_URB_TRACE
1117         {
1118                 struct ehci_qtd *qtd;
1119                 qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
1120                 ehci_dbg(ehci,
1121                          "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
1122                          __func__, urb->dev->devpath, urb,
1123                          epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
1124                          urb->transfer_buffer_length,
1125                          qtd, urb->ep->hcpriv);
1126         }
1127 #endif
1128
1129         spin_lock_irqsave (&ehci->lock, flags);
1130         if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
1131                 rc = -ESHUTDOWN;
1132                 goto done;
1133         }
1134         rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
1135         if (unlikely(rc))
1136                 goto done;
1137
1138         qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
1139         if (unlikely(qh == NULL)) {
1140                 usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
1141                 rc = -ENOMEM;
1142                 goto done;
1143         }
1144
1145         /* Control/bulk operations through TTs don't need scheduling,
1146          * the HC and TT handle it when the TT has a buffer ready.
1147          */
1148         if (likely (qh->qh_state == QH_STATE_IDLE))
1149                 qh_link_async(ehci, qh);
1150  done:
1151         spin_unlock_irqrestore (&ehci->lock, flags);
1152         if (unlikely (qh == NULL))
1153                 qtd_list_free (ehci, urb, qtd_list);
1154         return rc;
1155 }
1156
1157 /*-------------------------------------------------------------------------*/
1158
1159 /* the async qh for the qtds being reclaimed are now unlinked from the HC */
1160
1161 static void end_unlink_async (struct ehci_hcd *ehci)
1162 {
1163         struct ehci_qh          *qh = ehci->reclaim;
1164         struct ehci_qh          *next;
1165
1166         iaa_watchdog_done(ehci);
1167
1168         // qh->hw_next = cpu_to_hc32(qh->qh_dma);
1169         qh->qh_state = QH_STATE_IDLE;
1170         qh->qh_next.qh = NULL;
1171         qh_put (qh);                    // refcount from reclaim
1172
1173         /* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
1174         next = qh->reclaim;
1175         ehci->reclaim = next;
1176         qh->reclaim = NULL;
1177
1178         qh_completions (ehci, qh);
1179
1180         if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
1181                 qh_link_async (ehci, qh);
1182         } else {
1183                 /* it's not free to turn the async schedule on/off; leave it
1184                  * active but idle for a while once it empties.
1185                  */
1186                 if (ehci->rh_state == EHCI_RH_RUNNING
1187                                 && ehci->async->qh_next.qh == NULL)
1188                         timer_action (ehci, TIMER_ASYNC_OFF);
1189         }
1190         qh_put(qh);                     /* refcount from async list */
1191
1192         if (next) {
1193                 ehci->reclaim = NULL;
1194                 start_unlink_async (ehci, next);
1195         }
1196
1197         if (ehci->has_synopsys_hc_bug)
1198                 ehci_writel(ehci, (u32) ehci->async->qh_dma,
1199                             &ehci->regs->async_next);
1200 }
1201
1202 /* makes sure the async qh will become idle */
1203 /* caller must own ehci->lock */
1204
1205 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
1206 {
1207         int             cmd = ehci_readl(ehci, &ehci->regs->command);
1208         struct ehci_qh  *prev;
1209
1210 #ifdef DEBUG
1211         assert_spin_locked(&ehci->lock);
1212         if (ehci->reclaim
1213                         || (qh->qh_state != QH_STATE_LINKED
1214                                 && qh->qh_state != QH_STATE_UNLINK_WAIT)
1215                         )
1216                 BUG ();
1217 #endif
1218
1219         /* stop async schedule right now? */
1220         if (unlikely (qh == ehci->async)) {
1221                 /* can't get here without STS_ASS set */
1222                 if (ehci->rh_state != EHCI_RH_HALTED
1223                                 && !ehci->reclaim) {
1224                         /* ... and CMD_IAAD clear */
1225                         ehci_writel(ehci, cmd & ~CMD_ASE,
1226                                     &ehci->regs->command);
1227                         wmb ();
1228                         // handshake later, if we need to
1229                         timer_action_done (ehci, TIMER_ASYNC_OFF);
1230                 }
1231                 return;
1232         }
1233
1234         qh->qh_state = QH_STATE_UNLINK;
1235         ehci->reclaim = qh = qh_get (qh);
1236
1237         prev = ehci->async;
1238         while (prev->qh_next.qh != qh)
1239                 prev = prev->qh_next.qh;
1240
1241         prev->hw->hw_next = qh->hw->hw_next;
1242         prev->qh_next = qh->qh_next;
1243         if (ehci->qh_scan_next == qh)
1244                 ehci->qh_scan_next = qh->qh_next.qh;
1245         wmb ();
1246
1247         /* If the controller isn't running, we don't have to wait for it */
1248         if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) {
1249                 /* if (unlikely (qh->reclaim != 0))
1250                  *      this will recurse, probably not much
1251                  */
1252                 end_unlink_async (ehci);
1253                 return;
1254         }
1255
1256         cmd |= CMD_IAAD;
1257         ehci_writel(ehci, cmd, &ehci->regs->command);
1258         (void)ehci_readl(ehci, &ehci->regs->command);
1259         iaa_watchdog_start(ehci);
1260 }
1261
1262 /*-------------------------------------------------------------------------*/
1263
1264 static void scan_async (struct ehci_hcd *ehci)
1265 {
1266         bool                    stopped;
1267         struct ehci_qh          *qh;
1268         enum ehci_timer_action  action = TIMER_IO_WATCHDOG;
1269
1270         timer_action_done (ehci, TIMER_ASYNC_SHRINK);
1271         stopped = (ehci->rh_state != EHCI_RH_RUNNING);
1272
1273         ehci->qh_scan_next = ehci->async->qh_next.qh;
1274         while (ehci->qh_scan_next) {
1275                 qh = ehci->qh_scan_next;
1276                 ehci->qh_scan_next = qh->qh_next.qh;
1277  rescan:
1278                 /* clean any finished work for this qh */
1279                 if (!list_empty(&qh->qtd_list)) {
1280                         int temp;
1281
1282                         /*
1283                          * Unlinks could happen here; completion reporting
1284                          * drops the lock.  That's why ehci->qh_scan_next
1285                          * always holds the next qh to scan; if the next qh
1286                          * gets unlinked then ehci->qh_scan_next is adjusted
1287                          * in start_unlink_async().
1288                          */
1289                         qh = qh_get(qh);
1290                         temp = qh_completions(ehci, qh);
1291                         if (qh->needs_rescan)
1292                                 unlink_async(ehci, qh);
1293                         qh->unlink_time = jiffies + EHCI_SHRINK_JIFFIES;
1294                         qh_put(qh);
1295                         if (temp != 0)
1296                                 goto rescan;
1297                 }
1298
1299                 /* unlink idle entries, reducing DMA usage as well
1300                  * as HCD schedule-scanning costs.  delay for any qh
1301                  * we just scanned, there's a not-unusual case that it
1302                  * doesn't stay idle for long.
1303                  * (plus, avoids some kind of re-activation race.)
1304                  */
1305                 if (list_empty(&qh->qtd_list)
1306                                 && qh->qh_state == QH_STATE_LINKED) {
1307                         if (!ehci->reclaim && (stopped ||
1308                                         time_after_eq(jiffies, qh->unlink_time)))
1309                                 start_unlink_async(ehci, qh);
1310                         else
1311                                 action = TIMER_ASYNC_SHRINK;
1312                 }
1313         }
1314         if (action == TIMER_ASYNC_SHRINK)
1315                 timer_action (ehci, TIMER_ASYNC_SHRINK);
1316 }