+++ /dev/null
-#ifndef _ASM_X86_PERCPU_H_
-#define _ASM_X86_PERCPU_H_
-
-#ifdef CONFIG_X86_64
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
- in the PDA. Longer term the PDA and every per cpu variable
- should be just put into a single section and referenced directly
- from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif
-#include <asm-generic/percpu.h>
-
-DECLARE_PER_CPU(struct x8664_pda, pda);
-
-/*
- * These are supposed to be implemented as a single instruction which
- * operates on the per-cpu data base segment. x86-64 doesn't have
- * that yet, so this is a fairly inefficient workaround for the
- * meantime. The single instruction is atomic with respect to
- * preemption and interrupts, so we need to explicitly disable
- * interrupts here to achieve the same effect. However, because it
- * can be used from within interrupt-disable/enable, we can't actually
- * disable interrupts; disabling preemption is enough.
- */
-#define x86_read_percpu(var) \
- ({ \
- typeof(per_cpu_var(var)) __tmp; \
- preempt_disable(); \
- __tmp = __get_cpu_var(var); \
- preempt_enable(); \
- __tmp; \
- })
-
-#define x86_write_percpu(var, val) \
- do { \
- preempt_disable(); \
- __get_cpu_var(var) = (val); \
- preempt_enable(); \
- } while(0)
-
-#else /* CONFIG_X86_64 */
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg) \
- movl %fs:per_cpu__##this_cpu_off, reg; \
- lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var) %fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg) \
- movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var) per_cpu__##var
-#endif /* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-
-#else /* !SMP */
-
-#define __percpu_seg ""
-
-#endif /* SMP */
-
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op, var, val) \
-do { \
- typedef typeof(var) T__; \
- if (0) { \
- T__ tmp__; \
- tmp__ = (val); \
- } \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b %1,"__percpu_seg"%0" \
- : "+m" (var) \
- : "ri" ((T__)val)); \
- break; \
- case 2: \
- asm(op "w %1,"__percpu_seg"%0" \
- : "+m" (var) \
- : "ri" ((T__)val)); \
- break; \
- case 4: \
- asm(op "l %1,"__percpu_seg"%0" \
- : "+m" (var) \
- : "ri" ((T__)val)); \
- break; \
- default: __bad_percpu_size(); \
- } \
-} while (0)
-
-#define percpu_from_op(op, var) \
-({ \
- typeof(var) ret__; \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 2: \
- asm(op "w "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 4: \
- asm(op "l "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- ret__; \
-})
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-#endif /* !CONFIG_X86_64 */
-
-#ifdef CONFIG_SMP
-
-/*
- * Define the "EARLY_PER_CPU" macros. These are used for some per_cpu
- * variables that are initialized and accessed before there are per_cpu
- * areas allocated.
- */
-
-#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
- DEFINE_PER_CPU(_type, _name) = _initvalue; \
- __typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
- { [0 ... NR_CPUS-1] = _initvalue }; \
- __typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
-
-#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
- EXPORT_PER_CPU_SYMBOL(_name)
-
-#define DECLARE_EARLY_PER_CPU(_type, _name) \
- DECLARE_PER_CPU(_type, _name); \
- extern __typeof__(_type) *_name##_early_ptr; \
- extern __typeof__(_type) _name##_early_map[]
-
-#define early_per_cpu_ptr(_name) (_name##_early_ptr)
-#define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
-#define early_per_cpu(_name, _cpu) \
- (early_per_cpu_ptr(_name) ? \
- early_per_cpu_ptr(_name)[_cpu] : \
- per_cpu(_name, _cpu))
-
-#else /* !CONFIG_SMP */
-#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
- DEFINE_PER_CPU(_type, _name) = _initvalue
-
-#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
- EXPORT_PER_CPU_SYMBOL(_name)
-
-#define DECLARE_EARLY_PER_CPU(_type, _name) \
- DECLARE_PER_CPU(_type, _name)
-
-#define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
-#define early_per_cpu_ptr(_name) NULL
-/* no early_per_cpu_map() */
-
-#endif /* !CONFIG_SMP */
-
-#endif /* _ASM_X86_PERCPU_H_ */
projects / l4.git / blobdiff