port (
gpio2: in std_logic; -- SDA
gpio3: in std_logic; -- SCL
- gpio4: in std_logic; -- CLK
+ gpio4: in std_logic; -- CLK (gpio_clk)
gpio14: in std_logic; -- Tx
gpio15: in std_logic; -- Rx
- gpio17: in std_logic; -- RTS
- gpio18: in std_logic; -- PWM0/PCMCLK
- gpio27: in std_logic; -- SD1DAT3
- gpio22: in std_logic; -- SD1CLK
- gpio23: in std_logic; -- SD1CMD
- gpio24: in std_logic; -- SD1DAT0
- gpio10: in std_logic; -- SPI0MOSI
- gpio9: out std_logic; -- SPI0MISO
- gpio25: in std_logic; -- SD1DAT1
- gpio11: in std_logic; -- SPI0SCLK
+ gpio17: inout std_logic; -- RTS (irc_i)
+ gpio18: in std_logic; -- PWM0/PCMCLK (pwm_in/pwm1)
+ gpio27: inout std_logic; -- SD1DAT3 (irc_b)
+ gpio22: in std_logic; -- SD1CLK (pwm_dir_in/pwm1_en)
+ gpio23: inout std_logic; -- SD1CMD (irc_a)
+ gpio24: inout std_logic; -- SD1DAT0 (irc_a)
+ gpio10: in std_logic; -- SPI0MOSI (spi_mosi)
+ gpio9: out std_logic; -- SPI0MISO (spi_miso)
+ gpio25: inout std_logic; -- SD1DAT1 (irc_b)
+ gpio11: in std_logic; -- SPI0SCLK (spi_clk)
gpio8: in std_logic; -- SPI0CE0
- gpio7: in std_logic; -- SPI0CE1
+ gpio7: in std_logic; -- SPI0CE1 (spi_ce)
gpio5: in std_logic; -- GPCLK1
gpio6: in std_logic; -- GPCLK2
- gpio12: in std_logic; -- PWM0
- gpio13: in std_logic; -- PWM1
- gpio19: in std_logic; -- PWM1/SPI1MISO/PCMFS
+ gpio12: in std_logic; -- PWM0 (pwm3)
+ gpio13: in std_logic; -- PWM1 (pwm2)
+ gpio19: in std_logic; -- PWM1/SPI1MISO/PCMFS (pwm2_en)
gpio16: in std_logic; -- SPI1CE2
- gpio26: in std_logic; -- SD1DAT2
+ gpio26: in std_logic; -- SD1DAT2 (pwm3_en)
gpio20: in std_logic; -- SPI1MOSI/PCMDIN/GPCLK0
gpio21: in std_logic; -- SPI1SCLK/PCMDOUT/GPCLK1
--
signal pwm_en_p: std_logic_vector(1 to 3);
signal pwm_en_n: std_logic_vector(1 to 3);
signal pwm_sig: std_logic_vector(1 to 3);
+ signal shdn_sig: std_logic_vector (1 to 3);
signal income_data_valid: std_logic;
+ signal spi_timout_pulse: std_logic;
signal clk_4M17: std_logic;
-- irc signals processing
signal irc_i_prev: std_logic;
+
+ -- function configuration options
+ -- direct IRC channel A, B and I output to RPi/SoC
+ signal fnccfg_direct_irc: std_logic;
+ -- direct 3 phase PWM output
+ signal fnccfg_direct_3ph_pwm: std_logic;
+ -- PWM1 and PWM2 controlled by PWM input and direction
+ signal fnccfg_pwm12_by_pwm_and_dir: std_logic;
--filetered irc signals
signal irc_a_dff3: std_logic;
--16k3 clk signal
signal clk_16k3: std_logic;
--detekce prichazejicich prikazu po SPI
- signal spi_command_lost: std_logic;
-
+
-- attribute syn_noprune of gpio2 : signal is true;
-- attribute syn_preserve of gpio2 : signal is true;
-- attribute syn_keep of gpio2 : signal is true;
gla => pll_clkout,
lock => pll_lock);
- -- the failasfe signal from communication block if CRC is used
- next_failsafe <= '0';
-
reset_async <= not pll_lock or clkmon_fail;
pll_clkin <= gpio_clk;
count => pwm_count,
-- outputs
out_p => pwm_sig(i), --positive signal
- out_n => shdn(i) --reverse signal is in shutdown mode
+ out_n => shdn_sig(i) --reverse signal is in shutdown mode
);
end generate;
div12_map: cnt_div
+ generic map (
+ cnt_width_g => 4
+ )
port map(
clk_i => gpio_clk,
en_i =>'1',
ratio_i =>"1101", --POZN.: counter detekuje cnt<=1
q_out_o =>clk_4M17
);
-
- div256_map: div256
+
+ clk_16k3_div: cnt_div
+ generic map (
+ cnt_width_g => 8
+ )
port map(
- clk_in => clk_4M17,
- div256 => clk_16k3
+ clk_i => gpio_clk,
+ en_i => clk_4M17,
+ reset_i => '0',
+ ratio_i => "11111111",
+ q_out_o => clk_16k3
);
-
- div128_map: div128
+
+ spi_timeout_div : cnt_div
+ generic map (
+ cnt_width_g => 7
+ )
port map(
- clk_in => clk_16k3,
- rst => income_data_valid,
- fail_safe => spi_command_lost
-);
+ clk_i => gpio_clk,
+ en_i => clk_16k3,
+ reset_i => income_data_valid,
+ ratio_i => "1111111",
+ q_out_o => spi_timout_pulse
+ );
-- ADC needs 3.2 MHz clk when powered from +5V Vcc
-- 2.0 MHz clk when +2.7V Vcc
-- on the input is 4.17Mhz,but this frequency is divided inside adc_reader by 2 to 2.08 Mhz,
- -- while we use +3.3V Vcc
- adc_reader_map: adc_reader
+ -- while we use +3.3V Vcc
+ adc_reader_map: adc_reader
port map(
clk => gpio_clk,
divided_clk => clk_4M17,
port map(
clk_i => gpio_clk,
d_i => irc_a,
- q_o => irc_a_dff3
+ q_o => irc_a_dff3
);
dff3_b: dff3
port map(
clk_i => gpio_clk,
d_i => irc_b,
- q_o => irc_b_dff3
+ q_o => irc_b_dff3
);
dummy_unused <= gpio2 and gpio3 and
gpio20 and gpio21 and gpio26 and
stat(1) and stat(2) and stat(3) and
hal_in(1) and hal_in(2) and hal_in(3) and
- irc_i and power_stat and
- adc_miso and
+ irc_i and power_stat and
+ adc_miso and
rs485_rxd and
can_rx and can_tx and
- dip_sw(1) and dip_sw(2) and dip_sw(3) and
irc_a and irc_b and
gpio17 and gpio18 and gpio27 and gpio22 and gpio23 and gpio24 and gpio25 and
gpio8 and
ext_scs1 and ext_scs2 and ext_miso and ext_mosi and ext_sclk and ext_scs0;
+
+ fnccfg_direct_irc <= not dip_sw(1);
+ fnccfg_direct_3ph_pwm <= not dip_sw(2) and dip_sw(3);
+ fnccfg_pwm12_by_pwm_and_dir <= not dip_sw(2) and not dip_sw(3);
rs485_txd <= '1';
rs485_dir <= '0';
spi_mosi <= gpio10;
gpio9 <= spi_miso;
- pwm(1) <= pwm_sig(1) and dip_sw(1) and not spi_command_lost;
- pwm(2) <= pwm_sig(2) and dip_sw(2) and not spi_command_lost;
- pwm(3) <= pwm_sig(3) and dip_sw(3) and not spi_command_lost;
-
-
+ irc_direct_output_selection: process(fnccfg_direct_irc, irc_a, irc_b, irc_i)
+ begin
+ if fnccfg_direct_irc = '1' then
+ gpio23 <= irc_a;
+ gpio24 <= irc_a;
+ gpio27 <= irc_b;
+ gpio25 <= irc_b;
+ gpio17 <= irc_i;
+ else
+ gpio23 <= 'Z';
+ gpio24 <= 'Z';
+ gpio27 <= 'Z';
+ gpio25 <= 'Z';
+ gpio17 <= 'Z';
+ end if;
+ end process;
+
+ pwm_output_selection: process(pwm_sig, shdn_sig,
+ fnccfg_direct_3ph_pwm, fnccfg_pwm12_by_pwm_and_dir,
+ fnccfg_pwm12_by_pwm_and_dir, gpio12, gpio13, gpio18, gpio19,
+ gpio22, gpio26)
+ begin
+ if fnccfg_direct_3ph_pwm = '1' then
+ pwm(1) <= gpio18;
+ pwm(2) <= gpio13;
+ pwm(3) <= gpio12;
+ shdn(1) <= not gpio22;
+ shdn(2) <= not gpio19;
+ shdn(3) <= not gpio26;
+ elsif fnccfg_pwm12_by_pwm_and_dir = '1' then
+ -- pwm(1) <= pwm_in and not pwm_dir_in;
+ pwm(1) <= gpio18 and not gpio22;
+ -- pwm(2) <= pwm_in and pwm_dir_in;;
+ pwm(2) <= gpio18 and gpio22;
+ pwm(3) <= '0';
+ shdn(1) <= '0';
+ shdn(2) <= '0';
+ shdn(3) <= '1';
+ else
+ pwm <= pwm_sig;
+ shdn <= shdn_sig;
+ end if;
+ end process;
+
process
begin
wait until (gpio_clk'event and gpio_clk='1');
end if;
end if;
-
+
+ if (ce0_old = "10" ) then
+ income_data_valid <= '1';
+ else
+ income_data_valid <= '0';
+ end if;
+
--sestupna hrana SS, pripravime data pro prenos
- if (ce0_old = "10" ) then
- income_data_valid<='0';
+ if (ce0_old = "10" ) then
dat_reg(127 downto 96) <= position(31 downto 0); --pozice
dat_reg(95 downto 93) <= hal_in(1 to 3); --halovy sondy
dat_reg(92 downto 81) <= index_position(11 downto 0); --position of irc_i
pwm_match(1)(pwm_width-1 downto 0)<=dat_reg(pwm_width+31 downto 32);
pwm_match(2)(pwm_width-1 downto 0)<=dat_reg(pwm_width+15 downto 16);
pwm_match(3)(pwm_width-1 downto 0)<=dat_reg(pwm_width-1 downto 0);
- income_data_valid<='1';
end if;
end process;
end if;
end process;
+ failsafe_spi_monitor: process (failsafe, spi_timout_pulse, income_data_valid)
+ begin
+ -- the failasfe signal from communication block if CRC is used
+ -- or simple watchdog for SPI communication
+ if income_data_valid = '1' then
+ next_failsafe <= '0';
+ elsif spi_timout_pulse = '1' then
+ next_failsafe <= '1';
+ else
+ next_failsafe <= failsafe;
+ end if;
+ end process;
+
async_rst: process (gpio_clk, reset_async, reset_sync)
begin
if reset_async = '1' then
projects / fpga / rpi-motor-control.git / commitdiff