X-Git-Url: https://rtime.felk.cvut.cz/gitweb/fpga/rpi-motor-control.git/blobdiff_plain/25e4be86876f738bf5ceae5764a1d0fe42272aef..694d7155f582476ae9c042258e98fc867eb6b1ba:/pmsm-control/test_sw/main_pmsm.c

diff --git a/pmsm-control/test_sw/main_pmsm.c b/pmsm-control/test_sw/main_pmsm.c
index 50e32e1..56b926a 100644
--- a/pmsm-control/test_sw/main_pmsm.c
+++ b/pmsm-control/test_sw/main_pmsm.c
@@ -24,10 +24,8 @@
 #include "pmsm_state.h"
 #include "cmd_proc.h"
 
-#define PRUM_PROUD 	2061
-#define PRUM_SOUC	6183
-#define MAX_DUTY	128
-#define PID_P		0.1
+#define MAX_DUTY	170
+#define PID_P		0.3
 
 #define PRIOR_KERN	50
 #define PRIOR_HIGH	49
@@ -43,7 +41,6 @@
 struct rpi_in data;
 struct rpi_state rps={
 	.spi_dat=&data,
-	.thd_par_sem=NULL,
 	.test=0,
 	.pwm1=0,.pwm2=0, .pwm3=0,
 	.pwm1=0, .t_pwm2=0, .t_pwm3=0,
@@ -72,6 +69,24 @@ int clk_init()
 inline void clk_disable(){
 	termClock(0);
 }
+/*
+ * \brief
+ * Count minimum value of three numbers.
+ * Input values must be in range <-2^28;2^28>.
+ */
+int32_t min(int32_t x, int32_t y, int32_t z){
+        int32_t diff,sign;
+
+        diff=x-y; /*rozdil*/
+        sign=(*((uint32_t*)&diff))>>31; /*znamenko -> detekuje, ze y je vetsi*/
+        x=y+sign*diff; /*ulozime mensi cislo, pokud sign>0, pak diff<0 */
+
+        diff=x-z; /*rozdil*/
+        sign=(*((uint32_t*)&diff))>>31; /*znamenko -> detekuje, ze z je vetsi*/
+        x=z+sign*diff; /*ulozime mensi cislo, pokud sign>0, pak diff<0 */
+
+        return x;
+}
 
 /**
  * \brief Signal handler pro Ctrl+C
@@ -90,18 +105,98 @@ void substractOffset(struct rpi_in* data, struct rpi_in* offset){
 	return;
 }
 /*
- * pocita procentualni odchylku od prumerneho proudu
+ * \brief
+ * Transformace pro uhel pocitany po smeru hodinovych rucicek
  */
-float diff_p(float value){
-	return ((float)value-PRUM_PROUD)*100/PRUM_PROUD;
+void dq2alphabeta(int32_t *alpha, int32_t *beta, int d, int q, int32_t sin, int32_t cos){
+	*alpha=cos*d+sin*q;
+	*beta=-sin*d+cos*q;
+	return;
+}
+void alphabeta2pwm3(int32_t * ia, int32_t * ib, int32_t *ic,int32_t alpha, int32_t beta){
+	*ia=alpha;
+	*ib=-alpha/2+beta*887/1024;
+	*ic=-alpha/2-beta*887/1024;
 }
 /*
- * pocita procentualni odchylku od prumerneho souctu proudu
+ * \brief
+ * Preocita napeti na jednotlivych civkach na napeti,
+ * 	ktera budou privedena na svorky motoru.
+ * 	Tedy na A(yel)-pwm1, B(red)-pwm2, C(blk)-pwm3
  */
-float diff_s(float value){
-	return ((float)value-PRUM_SOUC)*100/PRUM_SOUC;
+void transDelta(int32_t * u1, int32_t * u2, int32_t *u3, int32_t ub , int32_t uc){
+	int32_t t;
+
+	/*vypocte napeti tak, aby odpovidaly rozdily*/
+	*u1=uc;
+	*u2=uc+ub;
+	*u3=0;
+
+	/*najde zaporne napeti*/
+	t=min(*u1,*u2,*u3);
+
+	/*dorovna zaporna napeti na nulu*/
+	*u1-=t;
+	*u2-=t;
+	*u3-=t;
 }
+void inv_trans_comm(int duty){
+	uint32_t pos;
+	int32_t sin, cos;
+	int32_t alpha, beta;
+	int32_t pwma,pwmb,pwmc;
+	pos=rps.index_dist;
+	/*melo by byt urceno co nejpresneji, aby faze 'a' splyvala s osou 'alpha'*/
+	pos+=717;
+	/*use it as cyclic 32-bit logic*/
+	pos*=4294967;
+	pxmc_sincos_fixed_inline(&sin, &cos, pos, 16);
+	dq2alphabeta(&alpha, &beta,0,duty, sin, cos);
+	alpha>>=16;
+	beta>>=16;
+	alphabeta2pwm3(&pwma,&pwmb, &pwmc,alpha,beta);
+
+	if (pwma<0) pwma=0;
+	if (pwmb<0) pwmb=0;
+	if (pwmc<0) pwmc=0;
+
+
+	rps.t_pwm1=(uint16_t)pwma;
+	rps.t_pwm3=(uint16_t)pwmb;
+	rps.t_pwm2=(uint16_t)pwmc;
+}
+
+void inv_trans_comm_2(int duty){
+	uint32_t pos;
+	int32_t sin, cos;
+	int32_t alpha, beta;
+	int32_t ua,ub,uc;
+	int32_t ia,ib,ic;
+	int32_t u1,u2,u3;
+	pos=rps.index_dist;
+
+	pos+=960; /*zarovnani faze 'a' s osou 'alpha'*/
 
+	/*pro výpočet sin a cos je pouzita 32-bit cyklicka logika*/
+	pos*=4294967;
+	pxmc_sincos_fixed_inline(&sin, &cos, pos, 16);
+
+	dq2alphabeta(&alpha, &beta,0,duty, sin, cos);
+	alpha>>=16;
+	beta>>=16;
+
+	alphabeta2pwm3(&ia,&ib, &ic,alpha,beta);
+
+	ua=ia;
+	ub=ib;
+	uc=ic;
+
+	transDelta(&u1,&u2, &u3,ub,uc);
+
+	rps.pwm1=(uint16_t)u1;
+	rps.pwm2=(uint16_t)u2;
+	rps.pwm3=(uint16_t)u3;
+}
 void prepare_tx(uint8_t * tx){
 
 	/*Data format:
@@ -452,7 +547,9 @@ void * read_data(void* param){
 			pid();
 			if (rps.index_ok && rps.commutate){
 				/*simple_ind_dist_commutator(rps.duty);*/
-				sin_commutator(rps.duty);
+				/*sin_commutator(rps.duty);*/
+				inv_trans_comm(rps.duty);
+				inv_trans_comm_2(rps.duty);
 			}else if(!rps.index_ok && rps.commutate){
 				simple_hall_commutator(rps.duty);
 			}