--
--- * LXPWR slave part *
--- common sioreg & common counter for several ADC&PWM blocks
+-- * Raspberry Pi BLDC/PMSM motor control design for RPi-MI-1 board *
+-- The toplevel component file
--
--- part of LXPWR motion control board (c) PiKRON Ltd
--- idea by Pavel Pisa PiKRON Ltd <pisa@cmp.felk.cvut.cz>
--- code by Marek Peca <mp@duch.cz>
--- 01/2013
+-- (c) 2015 Martin Prudek <prudemar@fel.cvut.cz>
+-- Czech Technical University in Prague
--
--- license: GNU GPLv3
+-- Project supervision and original project idea
+-- idea by Pavel Pisa <pisa@cmp.felk.cvut.cz>
+--
+-- Related RPi-MI-1 hardware is designed by Petr Porazil,
+-- PiKRON Ltd <http://www.pikron.com>
+--
+-- VHDL design reuses some components and concepts from
+-- LXPWR motion power stage board and LX_RoCoN system
+-- developed at PiKRON Ltd with base code implemented
+-- by Marek Peca <hefaistos@gmail.com>
+--
+-- license: GNU LGPL and GPLv3+
--
library ieee;
use ieee.numeric_std.all;
use work.util.all;
-entity rpi_mc_simple_dc is
+entity rpi_pmsm_control is
generic(
pwm_width : natural:=11
);
-- Unused terminal to keep design tools silent
dummy_unused : out std_logic
);
-end rpi_mc_simple_dc;
+end rpi_pmsm_control;
-architecture behavioral of rpi_mc_simple_dc is
+architecture behavioral of rpi_pmsm_control is
attribute syn_noprune :boolean;
attribute syn_preserve :boolean;
attribute syn_keep :boolean;
attribute syn_hier :boolean;
+
-- Actel lib
- -- component pll50to200
- -- port (
- -- powerdown, clka: in std_logic;
- -- lock, gla: out std_logic
- -- );
- -- end component;
+ component pll50to200
+ port (
+ powerdown, clka: in std_logic;
+ lock, gla: out std_logic
+ );
+ end component;
component CLKINT
port (A: in std_logic; Y: out std_logic);
component adc_reader is
port (
clk: in std_logic; --input clk
+ divided_clk : in std_logic; --divided clk - value suitable to sourcing voltage
adc_reset: in std_logic;
adc_miso: in std_logic; --spi master in slave out
adc_channels: out std_logic_vector (35 downto 0); --consistent data of 3 channels
end component;
- signal adc_reset : std_logic;
signal adc_channels: std_logic_vector(71 downto 0);
signal adc_m_count: std_logic_vector(8 downto 0);
-
+
+ --clock signals for logic and master fail monitoring
+ signal gpio_clk: std_logic;
+ signal pll_clkin, pll_clkout, pll_lock: std_logic;
+ signal clkmon_dly1, clkmon_dly2: std_logic;
+ signal clkmon_fail, clkmon_fail_next: std_logic;
+ signal clkmon_wdg: integer range 0 to 6;
+ signal reset_sync, reset_async: std_logic;
+ signal failsafe, next_failsafe: std_logic;
+
+ --RPi SPI interface signals named aliases
+ signal spi_clk, spi_ce, spi_mosi, spi_miso : std_logic;
signal spiclk_old: std_logic_vector(1 downto 0); --pro detekci hrany SPI hodin
+
--signal pwm_in, pwm_dir_in: std_logic;
- signal gpio_clk: std_logic;
signal dat_reg : STD_LOGIC_VECTOR (127 downto 0); --shift register for spi
signal position: std_logic_vector(31 downto 0); --pozice z qcounteru
signal index_position: std_logic_vector(11 downto 0); --pozice irc_i
signal pwm_match: pwm_res_type; --point of reversion of pwm output, 0 to 2047
signal pwm_count: std_logic_vector (pwm_width-1 downto 0); --counter, 0 to 2047
+ signal pwm_sync_at_next: std_logic;
signal pwm_sync: std_logic;
signal pwm_en_p: std_logic_vector(1 to 3);
signal pwm_en_n: std_logic_vector(1 to 3);
signal income_data_valid: std_logic;
signal clk_4M17: std_logic;
-
-
+
+ -- irc signals processing
+ signal irc_i_prev: std_logic;
-- attribute syn_noprune of gpio2 : signal is true;
-- attribute syn_preserve of gpio2 : signal is true;
y => gpio_clk
);
+ pll: pll50to200
+ port map (
+ powerdown => '1',
+ clka => pll_clkin,
+ gla => pll_clkout,
+ lock => pll_lock);
+
+ -- the failasfe signal from communication block if CRC is used
+ next_failsafe <= '0';
+
+ reset_async <= not pll_lock or clkmon_fail;
+
+ pll_clkin <= gpio_clk;
qcount: qcounter
port map (
port map (
clock => gpio_clk, --50 Mhz clk from gpclk on raspberry
sync => pwm_sync, --counter restarts
- data_valid => income_data_valid,
- failsafe => '0',
+ data_valid => pwm_sync_at_next,
+ failsafe => failsafe,
--
-- pwm config bits & match word
--
-- while we use +3.3V Vcc
adc_reader_map: adc_reader
port map(
- clk =>clk_4M17,
- adc_reset => adc_reset,
+ clk => gpio_clk,
+ divided_clk => clk_4M17,
+ adc_reset => income_data_valid, --reset at each SPI cycle,TODO: replace with PLL reset
adc_miso => adc_miso,
adc_channels => adc_channels,
adc_sclk => adc_sclk,
);
-
-
- -- pll: pll50to200
- -- port map (
- -- powerdown => '1',
- -- clka => pll_clkin,
- -- gla => pll_clkout,
- -- lock => pll_lock);
- -- -- reset <= not pll_lock;
- -- reset <= '0'; -- TODO: apply reset for good failsafe
- -- upon power-on
- -- clock <= clkm;
-
- dummy_unused <= gpio2 and gpio3 and gpio4 and
+ dummy_unused <= gpio2 and gpio3 and
gpio5 and gpio6 and
gpio12 and gpio13 and gpio14 and
gpio15 and gpio16 and gpio19 and
dip_sw(1) and dip_sw(2) and dip_sw(3) and
irc_a and irc_b and
gpio17 and gpio18 and gpio27 and gpio22 and gpio23 and gpio24 and gpio25 and
- gpio8 and gpio11 and gpio7 and gpio10 and
+ gpio8 and
ext_scs1 and ext_scs2 and ext_miso and ext_mosi and ext_sclk and ext_scs0;
rs485_txd <= '1';
rs485_dir <= '0';
+ spi_clk <= gpio11;
+ spi_ce <= gpio7;
+ spi_mosi <= gpio10;
+ gpio9 <= spi_miso;
pwm(1) <= pwm_sig(1) and dip_sw(1);
pwm(2) <= pwm_sig(2) and dip_sw(2);
process
begin
- wait until (irc_i'event and irc_i='1');
- index_position(11 downto 0)<=position(11 downto 0);
+ wait until (gpio_clk'event and gpio_clk='1');
+ if irc_i_prev = '0' and irc_i = '1' then
+ index_position(11 downto 0)<=position(11 downto 0);
+ end if;
+ irc_i_prev<=irc_i;
end process;
process
begin
wait until (gpio_clk'event and gpio_clk='1');
- IF(pwm_count = pwm_period) THEN
- --end of period reached
+ IF pwm_count = std_logic_vector(unsigned(pwm_period) - 1) THEN
+ --end of period nearly reached
+ --fetch new pwm match data
+ pwm_sync_at_next <= '1';
+ else
+ pwm_sync_at_next <= '0';
+ end if;
+
+ if pwm_sync_at_next='1' then
+ --end of period reached
pwm_count <= (others=>'0'); --reset counter
pwm_sync <= '1'; -- inform PWM logic about new period start
ELSE --end of period not reached
wait until (gpio_clk'event and gpio_clk='1');
--SCLK edge detection
- spiclk_old(0)<=gpio11;
+ spiclk_old(0)<=spi_clk;
spiclk_old(1)<=spiclk_old(0);
--SS edge detection
- ce0_old(0)<=gpio7;
+ ce0_old(0)<=spi_ce;
ce0_old(1)<=ce0_old(0);
if (spiclk_old="01") then --rising edge, faze cteni
- if (gpio7 = '0') then -- SPI CS must be selected
+ if (spi_ce = '0') then -- SPI CS must be selected
-- shift serial data into dat_reg on each rising edge
-- of SCK, MSB first
- dat_reg(127 downto 0) <= dat_reg(126 downto 0) & gpio10;
+ dat_reg(127 downto 0) <= dat_reg(126 downto 0) & spi_mosi;
end if;
elsif (spiclk_old="10" ) then --falling edge, faze zapisu
- if (gpio7 = '0') then
- gpio9 <= dat_reg(127); --zapisujeme nejdriv MSB
+ if (spi_ce = '0') then
+ spi_miso <= dat_reg(127); --zapisujeme nejdriv MSB
end if;
end if;
dat_reg(80 downto 72) <=adc_m_count(8 downto 0); --count of measurments
--data order schould be: ch2 downto ch0 downto ch1
dat_reg(71 downto 0) <= adc_channels(71 downto 0); --current mesurments
- adc_reset<='0'; --remove reset flag, and wait on its rising edge
+ spi_miso <= position(31); --prepare the first bit on SE activation
elsif (ce0_old = "01") then --rising edge of SS, we should read the data
- adc_reset<='1';
pwm_en_p(1 to 3)<=dat_reg(126 downto 124);
pwm_en_n(1 to 3)<=dat_reg(123 downto 121);
- --11 bit pwm TODO: make it generic
- pwm_match(1)(pwm_width-1 downto 0)<=dat_reg(66 downto 56);
- pwm_match(2)(pwm_width-1 downto 0)<=dat_reg(55 downto 45);
- -- 12 + 11 Unused
- pwm_match(3)(pwm_width-1 downto 0)<=dat_reg(42 downto 32);
+ --usable for up to 16-bit PWM duty cycle resolution (pwm_width):
+ pwm_match(1)(pwm_width-1 downto 0)<=dat_reg(pwm_width+31 downto 32);
+ pwm_match(2)(pwm_width-1 downto 0)<=dat_reg(pwm_width+15 downto 16);
+ pwm_match(3)(pwm_width-1 downto 0)<=dat_reg(pwm_width-1 downto 0);
income_data_valid<='1';
end if;
end process;
-
+
+ clock_monitor: process (pll_clkout, gpio_clk, clkmon_dly1, clkmon_wdg, clkmon_fail_next)
+ begin
+ if pll_clkout'event and pll_clkout = '1' then
+ clkmon_dly1 <= gpio_clk;
+ clkmon_dly2 <= clkmon_dly1;
+ if clkmon_dly1 = '0' and clkmon_dly2 = '1' then
+ clkmon_wdg <= 6;
+ clkmon_fail_next <= '0';
+ elsif clkmon_wdg > 0 then
+ clkmon_wdg <= clkmon_wdg - 1;
+ clkmon_fail_next <= '0';
+ else
+ clkmon_wdg <= 0;
+ clkmon_fail_next <= '1';
+ end if;
+ clkmon_fail <= clkmon_fail_next;
+ end if;
+ end process;
+
+ async_rst: process (gpio_clk, reset_async, reset_sync)
+ begin
+ if reset_async = '1' then
+ failsafe <= '1';
+ elsif gpio_clk'event and gpio_clk = '1' then
+ failsafe <= next_failsafe or reset_sync;
+ end if;
+ end process;
+
+ sync_rst: process (gpio_clk, reset_async)
+ begin
+ if gpio_clk'event and gpio_clk = '1' then
+ reset_sync <= reset_async;
+ end if;
+ end process;
+
end behavioral;
projects / fpga / rpi-motor-control.git / blobdiff