]> rtime.felk.cvut.cz Git - can-eth-gw-linux.git/blobdiff - Documentation/devicetree/bindings/usb/pxa-usb.txt
Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', 'for-3.8/i2c-hid', 'for...
[can-eth-gw-linux.git] / Documentation / devicetree / bindings / usb / pxa-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt
new file mode 100644 (file)
index 0000000..79729a9
--- /dev/null
@@ -0,0 +1,31 @@
+PXA USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "marvell,pxa-ohci" for USB controllers
+   used in host mode.
+
+Optional properties:
+ - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3"
+   If present, enables the appropriate USB port of the controller.
+ - "marvell,port-mode" selects the mode of the ports:
+       1 = PMM_NPS_MODE
+       2 = PMM_GLOBAL_MODE
+       3 = PMM_PERPORT_MODE
+ - "marvell,power-sense-low" - power sense pin is low-active.
+ - "marvell,power-control-low" - power control pin is low-active.
+ - "marvell,no-oc-protection" - disable over-current protection.
+ - "marvell,oc-mode-perport" - enable per-port over-current protection.
+ - "marvell,power_on_delay" Power On to Power Good time - in ms.
+
+Example:
+
+       usb0: ohci@4c000000 {
+               compatible = "marvell,pxa-ohci", "usb-ohci";
+               reg = <0x4c000000 0x100000>;
+               interrupts = <18>;
+               marvell,enable-port1;
+               marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+       };
+