Required Properties:
- compatible: should be one of the following.
- "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
+ - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
- "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
-- interrupts: interrupt specifier for the controller. The format and value of
- the interrupt specifier depends on the interrupt parent for the controller.
+- Pin banks as child nodes: Pin banks of the controller are represented by child
+ nodes of the controller node. Bank name is taken from name of the node. Each
+ bank node must contain following properties:
+
+ - gpio-controller: identifies the node as a gpio controller and pin bank.
+ - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See generic
+ GPIO binding documentation for description of particular cells.
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
-- interrupt-controller: identifies the controller node as interrupt-parent.
-- #interrupt-cells: the value of this property should be 2.
- - First Cell: represents the external gpio interrupt number local to the
- external gpio interrupt space of the controller.
- - Second Cell: flags to identify the type of the interrupt
- - 1 = rising edge triggered
- - 2 = falling edge triggered
- - 3 = rising and falling edge triggered
- - 4 = high level triggered
- - 8 = low level triggered
+ - interrupt-parent: phandle of the interrupt parent to which the external
+ GPIO interrupts are forwarded to.
+ - interrupts: interrupt specifier for the controller. The format and value of
+ the interrupt specifier depends on the interrupt parent for the controller.
+
+ In addition, following properties must be present in node of every bank
+ of pins supporting GPIO interrupts:
+
+ - interrupt-controller: identifies the controller node as interrupt-parent.
+ - #interrupt-cells: the value of this property should be 2.
+ - First Cell: represents the external gpio interrupt number local to the
+ external gpio interrupt space of the controller.
+ - Second Cell: flags to identify the type of the interrupt
+ - 1 = rising edge triggered
+ - 2 = falling edge triggered
+ - 3 = rising and falling edge triggered
+ - 4 = high level triggered
+ - 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
found on Samsung Exynos4210 SoC.
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
+ - interrupts: interrupt used by multiplexed wakeup interrupts.
+
+ In addition, following properties must be present in node of every bank
+ of pins supporting wake-up interrupts:
+
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
- 4 = high level triggered
- 8 = low level triggered
+ Node of every bank of pins supporting direct wake-up interrupts (without
+ multiplexing) must contain following properties:
+
+ - interrupt-parent: phandle of the interrupt parent to which the external
+ wakeup interrupts are forwarded to.
+ - interrupts: interrupts of the interrupt parent which are used for external
+ wakeup interrupts from pins of the bank, must contain interrupts for all
+ pins of the bank.
+
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
+Example: A pin-controller node with pin banks:
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+
+ /* ... */
+
+ /* Pin bank without external interrupts */
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* ... */
+
+ /* Pin bank with external GPIO or muxed wake-up interrupts */
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* ... */
+
+ /* Pin bank with external direct wake-up interrupts */
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ #interrupt-cells = <2>;
+ };
+
+ /* ... */
+ };
+
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
+ /* ... */
+
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ interrupts = <0 46 0>
- wakup_eint: wakeup-interrupt-controller {
+ /* ... */
+
+ wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
- <0 32 0>;
+ interrupts = <0 32 0>;
};
};
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
- ...
- ...
+
+ /* ... */
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
projects / can-eth-gw-linux.git / blobdiff