their output to UART1 serial port on DaVinci TNETV107X
devices.
+ config DEBUG_ZYNQ_UART0
+ bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 on the Zynq platform.
+
+ config DEBUG_ZYNQ_UART1
+ bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 on the Zynq platform.
+
+ If you have a ZC702 board and want early boot messages to
+ appear on the USB serial adaptor, select this option.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART2
- bool "i.MX6Q Debug UART2"
- depends on SOC_IMX6Q
- help
- Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART2. This is correct for e.g. the SabreLite
- board.
-
- config DEBUG_IMX6Q_UART4
- bool "i.MX6Q Debug UART4"
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART4.
+ on i.MX6Q.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_S3C_UART3
+ depends on PLAT_SAMSUNG && ARCH_EXYNOS
+ bool "Use S3C UART 3 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 3. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
+ config DEBUG_SUNXI_UART0
+ bool "Kernel low-level debugging messages via sunXi UART0"
+ depends on ARCH_SUNXI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART0.
+
+ config DEBUG_SUNXI_UART1
+ bool "Kernel low-level debugging messages via sunXi UART1"
+ depends on ARCH_SUNXI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART1.
+
+ config DEBUG_TEGRA_UART
+ depends on ARCH_TEGRA
+ bool "Use Tegra UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
endchoice
+config DEBUG_IMX6Q_UART_PORT
+ int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+ range 1 5
+ default 1
+ depends on SOC_IMX6Q
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
+choice
+ prompt "Low-level debug console UART"
+ depends on DEBUG_LL && DEBUG_TEGRA_UART
+
+ config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Via ODMDATA"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the ODMDATA value. This value is part of the BCT, and is written
+ to the boot memory device using nvflash, or other flashing tool.
+ When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+ 0/1/2/3/4 are UART A/B/C/D/E.
+
+ config TEGRA_DEBUG_UARTA
+ bool "UART A"
+
+ config TEGRA_DEBUG_UARTB
+ bool "UART B"
+
+ config TEGRA_DEBUG_UARTC
+ bool "UART C"
+
+ config TEGRA_DEBUG_UARTD
+ bool "UART D"
+
+ config TEGRA_DEBUG_UARTE
+ bool "UART E"
+
+endchoice
+
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/imx.S" if DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX31_IMX35_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX50_IMX53_UART ||\
+ DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+ default "debug/tegra.S" if DEBUG_TEGRA_UART
+ default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
config EARLY_PRINTK
projects / can-eth-gw-linux.git / blobdiff