Regenerated examples. Removed linux board. Added default cross compiler for TI.

[arc.git] / boards / linux / examples / os_simple / config / EcuM_PBcfg.c

diff --git a/boards/linux/examples/os_simple/config/EcuM_PBcfg.c b/boards/linux/examples/os_simple/config/EcuM_PBcfg.c
deleted file mode 100644 (file)
index 072d995..0000000
--- a/boards/linux/examples/os_simple/config/EcuM_PBcfg.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*\r
-* Configuration of module: EcuM (EcuM_PBcfg.c)\r
-*\r
-* Created by:              \r
-* Copyright:               \r
-*\r
-* Configured for (MCU):    MPC551x\r
-*\r
-* Module vendor:           ArcCore\r
-* Generator version:       2.0.2\r
-*\r
-* Generated by Arctic Studio (http://arccore.com) \r
-*/\r
-\r
-\r
-\r
-#include "EcuM.h"\r
-#include "EcuM_Generated_Types.h"\r
-\r
-#if defined(USE_CANSM)\r
-extern const CanSM_ConfigType CanSM_Config;\r
-#endif\r
-#if defined(USE_NM)\r
-extern const Nm_ConfigType Nm_Config;\r
-#endif\r
-#if defined(USE_CANNM)\r
-extern const CanNm_ConfigType CanNm_Config;\r
-#endif\r
-#if defined(USE_UDPNM)\r
-extern const UdpNm_ConfigType UdpNm_Config;\r
-#endif\r
-#if defined(USE_COMM)\r
-extern const ComM_ConfigType ComM_Config;\r
-#endif\r
-\r
-#if defined(USE_J1939TP)\r
-extern const J1939Tp_ConfigType J1939Tp_Config;\r
-#endif\r
-\r
-\r
-EcuM_ConfigType EcuMConfig =\r
-{\r
-       .EcuMDefaultShutdownTarget = ECUM_STATE_RESET,\r
-       .EcuMDefaultSleepMode = 0, // Don't care\r
-       .EcuMDefaultAppMode = OSDEFAULTAPPMODE,\r
-       .EcuMNvramReadAllTimeout = ECUM_NVRAM_READALL_TIMEOUT,\r
-       .EcuMNvramWriteAllTimeout = ECUM_NVRAM_WRITEALL_TIMEOUT,\r
-       .EcuMRunMinimumDuration = ECUM_NVRAM_MIN_RUN_DURATION,\r
-\r
-#if defined(USE_MCU)\r
-        .McuConfig = McuConfigData,\r
-#endif\r
-#if defined(USE_PORT)\r
-        .PortConfig = &PortConfigData,\r
-#endif\r
-#if defined(USE_CAN)\r
-        .CanConfig = &CanConfigData,\r
-#endif\r
-#if defined(USE_CANIF)\r
-        .CanIfConfig = &CanIf_Config,\r
-#endif\r
-#if defined(USE_CANSM)\r
-        .CanSMConfig = &CanSM_Config,\r
-#endif\r
-#if defined(USE_CANNM)\r
-        .CanNmConfig = &CanNm_Config,\r
-#endif\r
-#if defined(USE_UDPNM)\r
-        .UdpNmConfig = &UdpNm_Config,\r
-#endif\r
-#if defined(USE_COM)\r
-        .ComConfig = &ComConfiguration,\r
-#endif\r
-#if defined(USE_COMM)\r
-        .ComMConfig = &ComM_Config,\r
-#endif\r
-#if defined(USE_J1939TP)\r
-        .J1939TpConfig = &J1939Tp_Config,\r
-#endif\r
-#if defined(USE_NM)\r
-        .NmConfig = &Nm_Config,\r
-#endif\r
-#if defined(USE_PDUR)\r
-        .PduRConfig = &PduR_Config,\r
-#endif\r
-#if defined(USE_J1939TP)\r
-        .J1939TpConfig = &J1939Tp_Config,\r
-#endif\r
-#if defined(USE_DMA)\r
-        .DmaConfig = DmaConfig,\r
-#endif\r
-#if defined(USE_ADC)\r
-        .AdcConfig = AdcConfig,\r
-#endif\r
-#if defined(USE_PWM)\r
-        .PwmConfig = &PwmConfig,\r
-#endif\r
-#if defined(USE_WDG)\r
-    .WdgConfig = &WdgConfig,\r
-#endif\r
-#if defined(USE_WDGM)\r
-    .WdgMConfig = &WdgMConfig,\r
-#endif\r
-#if defined(USE_WDGIF)\r
-    .WdgIfConfig = &WdgIfConfig,\r
-#endif\r
-#if defined(USE_GPT)\r
-        .GptConfig = GptConfigData,\r
-#endif\r
-#if defined(USE_FLS)\r
-       .FlashConfig = FlsConfigSet,\r
-#endif\r
-#if defined(USE_EEP)\r
-       .EepConfig = EepConfigData,\r
-#endif\r
-#if defined(USE_SPI)\r
-       .SpiConfig = &SpiConfigData,\r
-#endif\r
-};\r