PiMX1 (arm), MO376 (m68k) and EC555 (powerpc) RTEMS configurations and build director...

darcs-hash:20051031121708-ff715-03255ea13ed83116bcb751062ed9310c2c683ebe.gz

diff --git a/rtems-build/arm-cexp/arm-cexp.cfg b/rtems-build/arm-cexp/arm-cexp.cfg
new file mode 100644 (file)
index 0000000..27b6413
--- /dev/null
+++ b/rtems-build/arm-cexp/arm-cexp.cfg
@@ -0,0 +1 @@
+../../cexp-1.4.beta/configure --target=arm-rtems --host=arm-rtems --prefix=/opt/rtems --disable-nlsg
\ No newline at end of file

diff --git a/rtems-build/arm-rtems/arm-rtems-sys.cfg b/rtems-build/arm-rtems/arm-rtems-sys.cfg
new file mode 100644 (file)
index 0000000..33928db
--- /dev/null
+++ b/rtems-build/arm-rtems/arm-rtems-sys.cfg
@@ -0,0 +1,120 @@
+../../rtems/configure --target=arm-rtems --prefix=/opt/rtems \
+  --enable-rtems-inlines --disable-multiprocessing --enable-cxx \
+  --disable-rdbg --enable-maintainer-mode --disable-tests \
+  --enable-networking --enable-posix --enable-itron --disable-ada \
+  --disable-expada --disable-multilib --disable-docs \
+  --enable-rtemsbsp=csb336
+
+# `configure' configures rtems 4.6.99.1 to adapt to many kinds of systems.
+# 
+# Usage: ../rtems/configure [OPTION]... [VAR=VALUE]...
+# 
+# To assign environment variables (e.g., CC, CFLAGS...), specify them as
+# VAR=VALUE.  See below for descriptions of some of the useful variables.
+# 
+# Defaults for the options are specified in brackets.
+# 
+# Configuration:
+#   -h, --help              display this help and exit
+#       --help=short        display options specific to this package
+#       --help=recursive    display the short help of all the included packages
+#   -V, --version           display version information and exit
+#   -q, --quiet, --silent   do not print `checking...' messages
+#       --cache-file=FILE   cache test results in FILE [disabled]
+#   -C, --config-cache      alias for `--cache-file=config.cache'
+#   -n, --no-create         do not create output files
+#       --srcdir=DIR        find the sources in DIR [configure dir or `..']
+# 
+# Installation directories:
+#   --prefix=PREFIX         install architecture-independent files in PREFIX
+#                        [/opt/rtems-4.7]
+#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                        [PREFIX]
+# 
+# By default, `make install' will install all the files in
+# `/opt/rtems-4.7/bin', `/opt/rtems-4.7/lib' etc.  You can specify
+# an installation prefix other than `/opt/rtems-4.7' using `--prefix',
+# for instance `--prefix=$HOME'.
+# 
+# For better control, use the options below.
+# 
+# Fine tuning of the installation directories:
+#   --bindir=DIR           user executables [EPREFIX/bin]
+#   --sbindir=DIR          system admin executables [EPREFIX/sbin]
+#   --libexecdir=DIR       program executables [EPREFIX/libexec]
+#   --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+#   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+#   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+#   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+#   --libdir=DIR           object code libraries [EPREFIX/lib]
+#   --includedir=DIR       C header files [PREFIX/include]
+#   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+#   --infodir=DIR          info documentation [PREFIX/info]
+#   --mandir=DIR           man documentation [PREFIX/man]
+# 
+# Program names:
+#   --program-prefix=PREFIX            prepend PREFIX to installed program names
+#   --program-suffix=SUFFIX            append SUFFIX to installed program names
+#   --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+# 
+# System types:
+#   --build=BUILD     configure for building on BUILD [guessed]
+#   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+#   --target=TARGET   configure for building compilers for TARGET [HOST]
+# 
+# Optional Features:
+#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#   --enable-maintainer-mode  enable make rules and dependencies not useful
+#                        (and sometimes confusing) to the casual installer
+#   --enable-multiprocessing
+#                           enable multiprocessing interface
+#   --enable-posix          enable posix interface
+#   --enable-itron          enable itron interface
+#   --enable-networking     enable TCP/IP stack
+#   --enable-rdbg           enable remote debugger
+#   --enable-rtems-inlines  enable RTEMS inline functions (default:enabled,
+#                           disable to use macros)
+#   --enable-cxx            enable C++ support and build the rtems++ library
+#   --enable-tests          enable tests (default:samples)
+#   --enable-rtems-debug    enable RTEMS_DEBUG
+#   --enable-rtemsbsp="bsp1 bsp2 .."
+#                           BSPs to include in build
+#   --enable-multilib       build many library versions (default=no)
+#   --enable-docs           enable building documentation (default:disabled)
+#   CC_FOR_BUILD
+#               c-compiler to be used for build subdirs (default: auto-detected)
+#   CFLAGS_FOR_BUILD
+#               c-flags to be used for build subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_BUILD
+#               c++-compiler to be used for build subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_BUILD
+#               c++-flags to be used for build subdirs (default: provided by
+#               autoconf)
+#   CC_FOR_HOST c-compiler to be used for host subdirs (default: auto-detected)
+#   CFLAGS_FOR_HOST
+#               c-flags to be used for host subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_HOST
+#               c++-compiler to be used for host subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_HOST
+#               c++-flags to be used for host subdirs (default: provided by
+#               autoconf)
+#   CC_FOR_TARGET
+#               c-compiler to be used for target subdirs (default:
+#               auto-detected)
+#   CFLAGS_FOR_TARGET
+#               c-flags to be used for target subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_TARGET
+#               c++-compiler to be used for target subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_TARGET
+#               c++-flags to be used for target subdirs (default: provided by
+#               autoconf)
+# 
+# Report bugs to <rtems-bugs@rtems.com>.
+# 
\ No newline at end of file

diff --git a/rtems-build/m68k-rtems/m68k-rtems-sys.cfg b/rtems-build/m68k-rtems/m68k-rtems-sys.cfg
new file mode 100644 (file)
index 0000000..a33cb73
--- /dev/null
+++ b/rtems-build/m68k-rtems/m68k-rtems-sys.cfg
@@ -0,0 +1,121 @@
+../../rtems/configure --target=m68k-rtems --prefix=/opt/rtems \
+  --enable-rtems-inlines --disable-multiprocessing --enable-cxx \
+  --enable-rdbg --enable-maintainer-mode --enable-tests=yes \
+  --enable-networking --enable-posix --enable-itron --disable-ada \
+  --disable-expada --disable-multilib --disable-docs  \
+  --enable-rtemsbsp=mo376
+
+#  --enable-rtems-debug \
+# `configure' configures rtems 4.6.99.1 to adapt to many kinds of systems.
+# 
+# Usage: ../rtems/configure [OPTION]... [VAR=VALUE]...
+# 
+# To assign environment variables (e.g., CC, CFLAGS...), specify them as
+# VAR=VALUE.  See below for descriptions of some of the useful variables.
+# 
+# Defaults for the options are specified in brackets.
+# 
+# Configuration:
+#   -h, --help              display this help and exit
+#       --help=short        display options specific to this package
+#       --help=recursive    display the short help of all the included packages
+#   -V, --version           display version information and exit
+#   -q, --quiet, --silent   do not print `checking...' messages
+#       --cache-file=FILE   cache test results in FILE [disabled]
+#   -C, --config-cache      alias for `--cache-file=config.cache'
+#   -n, --no-create         do not create output files
+#       --srcdir=DIR        find the sources in DIR [configure dir or `..']
+# 
+# Installation directories:
+#   --prefix=PREFIX         install architecture-independent files in PREFIX
+#                        [/opt/rtems-4.7]
+#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                        [PREFIX]
+# 
+# By default, `make install' will install all the files in
+# `/opt/rtems-4.7/bin', `/opt/rtems-4.7/lib' etc.  You can specify
+# an installation prefix other than `/opt/rtems-4.7' using `--prefix',
+# for instance `--prefix=$HOME'.
+# 
+# For better control, use the options below.
+# 
+# Fine tuning of the installation directories:
+#   --bindir=DIR           user executables [EPREFIX/bin]
+#   --sbindir=DIR          system admin executables [EPREFIX/sbin]
+#   --libexecdir=DIR       program executables [EPREFIX/libexec]
+#   --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+#   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+#   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+#   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+#   --libdir=DIR           object code libraries [EPREFIX/lib]
+#   --includedir=DIR       C header files [PREFIX/include]
+#   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+#   --infodir=DIR          info documentation [PREFIX/info]
+#   --mandir=DIR           man documentation [PREFIX/man]
+# 
+# Program names:
+#   --program-prefix=PREFIX            prepend PREFIX to installed program names
+#   --program-suffix=SUFFIX            append SUFFIX to installed program names
+#   --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+# 
+# System types:
+#   --build=BUILD     configure for building on BUILD [guessed]
+#   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+#   --target=TARGET   configure for building compilers for TARGET [HOST]
+# 
+# Optional Features:
+#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#   --enable-maintainer-mode  enable make rules and dependencies not useful
+#                        (and sometimes confusing) to the casual installer
+#   --enable-multiprocessing
+#                           enable multiprocessing interface
+#   --enable-posix          enable posix interface
+#   --enable-itron          enable itron interface
+#   --enable-networking     enable TCP/IP stack
+#   --enable-rdbg           enable remote debugger
+#   --enable-rtems-inlines  enable RTEMS inline functions (default:enabled,
+#                           disable to use macros)
+#   --enable-cxx            enable C++ support and build the rtems++ library
+#   --enable-tests          enable tests (default:samples)
+#   --enable-rtems-debug    enable RTEMS_DEBUG
+#   --enable-rtemsbsp="bsp1 bsp2 .."
+#                           BSPs to include in build
+#   --enable-multilib       build many library versions (default=no)
+#   --enable-docs           enable building documentation (default:disabled)
+#   CC_FOR_BUILD
+#               c-compiler to be used for build subdirs (default: auto-detected)
+#   CFLAGS_FOR_BUILD
+#               c-flags to be used for build subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_BUILD
+#               c++-compiler to be used for build subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_BUILD
+#               c++-flags to be used for build subdirs (default: provided by
+#               autoconf)
+#   CC_FOR_HOST c-compiler to be used for host subdirs (default: auto-detected)
+#   CFLAGS_FOR_HOST
+#               c-flags to be used for host subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_HOST
+#               c++-compiler to be used for host subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_HOST
+#               c++-flags to be used for host subdirs (default: provided by
+#               autoconf)
+#   CC_FOR_TARGET
+#               c-compiler to be used for target subdirs (default:
+#               auto-detected)
+#   CFLAGS_FOR_TARGET
+#               c-flags to be used for target subdirs (default: provided by
+#               autoconf)
+#   CXX_FOR_TARGET
+#               c++-compiler to be used for target subdirs (default:
+#               auto-detected)
+#   CXXFLAGS_FOR_TARGET
+#               c++-flags to be used for target subdirs (default: provided by
+#               autoconf)
+# 
+# Report bugs to <rtems-bugs@rtems.com>.
+# 
\ No newline at end of file

diff --git a/rtems-build/powerpc-rtems/rtems-ec555.cfg b/rtems-build/powerpc-rtems/rtems-ec555.cfg
new file mode 100644 (file)
index 0000000..8de519d
--- /dev/null
+++ b/rtems-build/powerpc-rtems/rtems-ec555.cfg
@@ -0,0 +1,122 @@
+../../rtems/configure --target=powerpc-rtems --prefix=/opt/rtems \
+  --enable-rtems-inlines --disable-multiprocessing --enable-cxx \
+  --enable-rdbg --enable-maintainer-mode --enable-tests=yes \
+  --enable-networking --enable-posix --enable-itron --disable-ada \
+  --disable-expada --disable-multilib --disable-docs  \
+  --enable-rtemsbsp="ec555"
+
+# --enable-rtemsbsp="ss555"
+
+#`configure' configures rtems 4.6.99.1 to adapt to many kinds of systems.
+#
+#Usage: ../rtems/configure [OPTION]... [VAR=VALUE]...
+#
+#To assign environment variables (e.g., CC, CFLAGS...), specify them as
+#VAR=VALUE.  See below for descriptions of some of the useful variables.
+#
+#Defaults for the options are specified in brackets.
+#
+#Configuration:
+#  -h, --help              display this help and exit
+#      --help=short        display options specific to this package
+#      --help=recursive    display the short help of all the included packages
+#  -V, --version           display version information and exit
+#  -q, --quiet, --silent   do not print `checking...' messages
+#      --cache-file=FILE   cache test results in FILE [disabled]
+#  -C, --config-cache      alias for `--cache-file=config.cache'
+#  -n, --no-create         do not create output files
+#      --srcdir=DIR        find the sources in DIR [configure dir or `..']
+#
+#Installation directories:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                        [/opt/rtems-4.7]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                        [PREFIX]
+#
+#By default, `make install' will install all the files in
+#`/opt/rtems-4.7/bin', `/opt/rtems-4.7/lib' etc.  You can specify
+#an installation prefix other than `/opt/rtems-4.7' using `--prefix',
+#for instance `--prefix=$HOME'.
+#
+#For better control, use the options below.
+#
+#Fine tuning of the installation directories:
+#  --bindir=DIR           user executables [EPREFIX/bin]
+#  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+#  --libexecdir=DIR       program executables [EPREFIX/libexec]
+#  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+#  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+#  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+#  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+#  --libdir=DIR           object code libraries [EPREFIX/lib]
+#  --includedir=DIR       C header files [PREFIX/include]
+#  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+#  --infodir=DIR          info documentation [PREFIX/info]
+#  --mandir=DIR           man documentation [PREFIX/man]
+#
+#Program names:
+#  --program-prefix=PREFIX            prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX            append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+#
+#System types:
+#  --build=BUILD     configure for building on BUILD [guessed]
+#  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+#  --target=TARGET   configure for building compilers for TARGET [HOST]
+#
+#Optional Features:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+#  --enable-multiprocessing
+#                          enable multiprocessing interface
+#  --enable-posix          enable posix interface
+#  --enable-itron          enable itron interface
+#  --enable-networking     enable TCP/IP stack
+#  --enable-rdbg           enable remote debugger
+#  --enable-rtems-inlines  enable RTEMS inline functions (default:enabled,
+#                          disable to use macros)
+#  --enable-cxx            enable C++ support and build the rtems++ library
+#  --enable-tests          enable tests (default:samples)
+#  --enable-rtems-debug    enable RTEMS_DEBUG
+#  --enable-rtemsbsp="bsp1 bsp2 .."
+#                          BSPs to include in build
+#  --enable-multilib       build many library versions (default=no)
+#  --enable-docs           enable building documentation (default:disabled)
+#  CC_FOR_BUILD
+#              c-compiler to be used for build subdirs (default: auto-detected)
+#  CFLAGS_FOR_BUILD
+#              c-flags to be used for build subdirs (default: provided by
+#              autoconf)
+#  CXX_FOR_BUILD
+#              c++-compiler to be used for build subdirs (default:
+#              auto-detected)
+#  CXXFLAGS_FOR_BUILD
+#              c++-flags to be used for build subdirs (default: provided by
+#              autoconf)
+#  CC_FOR_HOST c-compiler to be used for host subdirs (default: auto-detected)
+#  CFLAGS_FOR_HOST
+#              c-flags to be used for host subdirs (default: provided by
+#              autoconf)
+#  CXX_FOR_HOST
+#              c++-compiler to be used for host subdirs (default:
+#              auto-detected)
+#  CXXFLAGS_FOR_HOST
+#              c++-flags to be used for host subdirs (default: provided by
+#              autoconf)
+#  CC_FOR_TARGET
+#              c-compiler to be used for target subdirs (default:
+#              auto-detected)
+#  CFLAGS_FOR_TARGET
+#              c-flags to be used for target subdirs (default: provided by
+#              autoconf)
+#  CXX_FOR_TARGET
+#              c++-compiler to be used for target subdirs (default:
+#              auto-detected)
+#  CXXFLAGS_FOR_TARGET
+#              c++-flags to be used for target subdirs (default: provided by
+#              autoconf)
+#
+#Report bugs to <rtems-bugs@rtems.com>.
+