Added configuration to build GCC and binutils for CSB336, ARM9 and MPC555
authorPavel Pisa <pisa@cmp.felk.cvut.cz>
Tue, 14 Aug 2007 14:52:18 +0000 (16:52 +0200)
committerPavel Pisa <pi@thor.(none)>
Sat, 28 Nov 2009 23:29:47 +0000 (00:29 +0100)
darcs-hash:20070814145218-ff715-93983ef85fdf7af36fc7a48b6857d3ab7c6222f9.gz

rtems-build/arm-csb336/binutils/binutils-arm9-rtems.cfg [new file with mode: 0644]
rtems-build/arm-csb336/gcc/gcc-arm9-rtems.cfg [new file with mode: 0644]
rtems-build/m68k-mo376/binutils/binutils-m68k-rtems.cfg [new file with mode: 0644]
rtems-build/m68k-mo376/gcc/gcc-m68k-rtems.cfg [new file with mode: 0644]
rtems-build/powerpc-rtems/binutils/binutils-powerpc-rtems.cfg [new file with mode: 0644]
rtems-build/powerpc-rtems/gcc/gcc-powerpc-rtems.cfg [new file with mode: 0644]

diff --git a/rtems-build/arm-csb336/binutils/binutils-arm9-rtems.cfg b/rtems-build/arm-csb336/binutils/binutils-arm9-rtems.cfg
new file mode 100644 (file)
index 0000000..580d00a
--- /dev/null
@@ -0,0 +1,168 @@
+#Usage: configure [OPTIONS] [HOST]
+#
+#Options: [defaults in brackets]
+# --prefix=MYDIR                install into MYDIR [/usr/local]
+# --exec-prefix=MYDIR   install host-dependent files into MYDIR [/usr/local]
+# --help                        print this message [normal config]
+# --build=BUILD                 configure for building on BUILD [BUILD=HOST]
+# --host=HOST           configure for HOST [determined via config.guess]
+# --norecursion                 configure this directory only [recurse]
+# --program-prefix=FOO  prepend FOO to installed program names [""]
+# --program-suffix=FOO  append FOO to installed program names [""]
+# --program-transform-name=P transform installed names by sed pattern P [""]
+# --site=SITE           configure with site-specific makefile for SITE
+# --srcdir=DIR          find the sources in DIR [. or ..]
+# --target=TARGET       configure for TARGET [TARGET=HOST]
+# --tmpdir=TMPDIR       create temporary files in TMPDIR [/tmp]
+# --nfp                         configure for software floating point [hard float]
+# --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)
+# --without-FOO                 package FOO is NOT available
+# --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)
+# --disable-FOO                 do not include feature FOO
+#
+#Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.
+#
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=no]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-targets        alternative target configurations
+#  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library
+#  --with-mmap             try using mmap for BFD input files if available
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=yes]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-targets        alternative target configurations
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+
+# --target=i586-pc-linux-gnulibc1
+# --target=i586-mingw32
+# --target=m68k-coff
+# --target=m68k-linux-gnulibc1
+# --target=h8300-hitachi-coff
+# --target=tic30-ti-coff
+# --host=i586-pc-linux-gnulibc1 
+CFLAGS=-O2 LDFLAGS=-s \
+../../../binutils/configure \
+--host=i586-pc-linux-gnu  \
+--target=arm-rtems \
+--with-gnu-ld --exec-prefix=/usr --prefix=/usr \
+--enable-shared --enable-commonbfdlib --verbose \
+--with-mmap --enable-64-bit-bfd \
+--enable-targets=i586-pc-linux-gnu,i586-pc-linux-gnulibc1,\
+i386-coff,i586-msdosdjgpp,\
+m68k-linux-elf,m68k-rtems,m68k-coff,m68k-a.out-linux,\
+powerpc-rtems,powerpc-linux,m68hc11-elf,m68hc12-elf,\
+h8300-coff,h8300-elf,sh-coff,sh-rtemself,sh64-linux,\
+or32-elf,openrisc-elf,alpha-linux-gnu,\
+ia64-linux-gnu,x86_64-linux-gnu,\
+arm-rtems,arm-linux,arm-pe,arm-coff,avr-elf,\
+sparc-linux-elf,i586-win-pe,\
+tic30-ti-coff,tic30-ti-aout,tic4x-ti-coff,tic54x-ti-coff,msp430
+#i586-go32,
+#--ieee,
+#srec,symbolsrec,tekhex,binary,ihex,trad-core
diff --git a/rtems-build/arm-csb336/gcc/gcc-arm9-rtems.cfg b/rtems-build/arm-csb336/gcc/gcc-arm9-rtems.cfg
new file mode 100644 (file)
index 0000000..36f02d7
--- /dev/null
@@ -0,0 +1,169 @@
+# `configure' configures this package to adapt to many kinds of systems.
+# 
+# Usage: ../../gcc/configure [OPTION]... [VAR=VALUE]...
+# 
+# To assign environment variables (e.g., CC, CFLAGS...), specify them as
+# VAR=VALUE.  See below for descriptions of some of the useful variables.
+# 
+# Defaults for the options are specified in brackets.
+# 
+# Configuration:
+#   -h, --help              display this help and exit
+#       --help=short        display options specific to this package
+#       --help=recursive    display the short help of all the included packages
+#   -V, --version           display version information and exit
+#   -q, --quiet, --silent   do not print `checking...' messages
+#       --cache-file=FILE   cache test results in FILE [disabled]
+#   -C, --config-cache      alias for `--cache-file=config.cache'
+#   -n, --no-create         do not create output files
+#       --srcdir=DIR        find the sources in DIR [configure dir or `..']
+# 
+# Installation directories:
+#   --prefix=PREFIX         install architecture-independent files in PREFIX
+#                           [/usr/local]
+#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                           [PREFIX]
+# 
+# By default, `make install' will install all the files in
+# `/usr/local/bin', `/usr/local/lib' etc.  You can specify
+# an installation prefix other than `/usr/local' using `--prefix',
+# for instance `--prefix=$HOME'.
+# 
+# For better control, use the options below.
+# 
+# Fine tuning of the installation directories:
+#   --bindir=DIR           user executables [EPREFIX/bin]
+#   --sbindir=DIR          system admin executables [EPREFIX/sbin]
+#   --libexecdir=DIR       program executables [EPREFIX/libexec]
+#   --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+#   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+#   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+#   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+#   --libdir=DIR           object code libraries [EPREFIX/lib]
+#   --includedir=DIR       C header files [PREFIX/include]
+#   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+#   --infodir=DIR          info documentation [PREFIX/info]
+#   --mandir=DIR           man documentation [PREFIX/man]
+# 
+# Program names:
+#   --program-prefix=PREFIX            prepend PREFIX to installed program names
+#   --program-suffix=SUFFIX            append SUFFIX to installed program names
+#   --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+# 
+# System types:
+#   --build=BUILD     configure for building on BUILD [guessed]
+#   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+#   --target=TARGET   configure for building compilers for TARGET [HOST]
+# 
+# Optional Features:
+#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#   --enable-generated-files-in-srcdir
+#                           put copies of generated files in source dir
+#                           intended for creating source tarballs for users
+#                           without texinfo bison or flex.
+#   --enable-werror         enable -Werror in bootstrap stage2 and later
+#   --enable-checking=LIST
+#                        enable expensive run-time checks.  With LIST,
+#                        enable only specific categories of checks.
+#                        Categories are: misc,tree,rtl,rtlflag,gc,gcac,fold;
+#                        default is no checking
+#   --enable-coverage=LEVEL
+#                        enable compiler\'s code coverage collection.
+#                        Use to measure compiler performance and locate
+#                        unused parts of the compiler. With LEVEL, specify
+#                        optimization. Values are opt, noopt,
+#                        default is noopt
+#   --enable-gather-detailed-mem-stats         enable detailed memory allocation stats gathering
+#   --enable-multilib       enable library support for multiple ABIs
+#   --enable-__cxa_atexit   enable __cxa_atexit for C++
+#   --enable-threads        enable thread usage for target GCC
+#   --enable-threads=LIB    use LIB thread package for target GCC
+#   --enable-objc-gc     enable the use of Boehm's garbage collector with
+#                        the GNU Objective-C runtime
+#   --disable-shared        don't provide a shared libgcc
+#   --enable-intermodule    build the compiler in one step
+#   --enable-initfini-array    use .init_array/.fini_array sections
+#   --enable-sjlj-exceptions
+#                           arrange to use setjmp/longjmp exception handling
+#   --enable-libunwind-exceptions  force use libunwind for exceptions
+#   --disable-win32-registry
+#                           disable lookup of installation paths in the
+#                           Registry on Windows hosts
+#   --enable-win32-registry enable registry lookup (default)
+#   --enable-win32-registry=KEY
+#                           use KEY instead of GCC version as the last portion
+#                           of the registry key
+#   --enable-maintainer-mode
+#                           enable make rules and dependencies not useful
+#                           (and sometimes confusing) to the casual installer
+#   --enable-version-specific-runtime-libs
+#                           specify that runtime libraries should be
+#                           installed in a compiler-specific directory
+# 
+# Optional Packages:
+#   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#   --with-local-prefix=DIR specifies directory to put local include
+#   --with-gxx-include-dir=DIR
+#                           specifies directory to put g++ header files
+#   --with-cpp-install-dir=DIR
+#                           install the user visible C preprocessor in DIR
+#                           (relative to PREFIX) as well as PREFIX/bin
+#   --with-gnu-ld           arrange to work with GNU ld.
+#   --with-ld               arrange to use the specified ld (full pathname)
+#   --with-gnu-as           arrange to work with GNU as
+#   --with-as               arrange to use the specified as (full pathname)
+#   --with-stabs            arrange to use stabs instead of host debug format
+#   --with-dwarf2           force the default debug format to be DWARF 2
+#   --with-sysroot=DIR Search for usr/lib, usr/include, et al, within DIR.
+#   --with-libiconv-prefix=DIR  search for libiconv in DIR/include and DIR/lib
+#   --with-gc={simple,page,zone} choose the garbage collection mechanism to use
+#                           with the compiler
+#   --with-system-zlib      use installed libz
+#   --with-slibdir=DIR      shared libraries in DIR LIBDIR
+# 
+# Some influential environment variables:
+#   CC          C compiler command
+#   CFLAGS      C compiler flags
+#   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+#               nonstandard directory <lib dir>
+#   CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+#               headers in a nonstandard directory <include dir>
+#   CPP         C preprocessor
+# 
+# Use these variables to override the choices made by `configure' or to help
+# it to find libraries and programs with nonstandard names/locations.
+# 
+# ../configure --prefix=/usr --libdir=/usr/lib --with-slibdir=/lib
+# --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared 
+# --enable-threads=posix --disable-checking --enable-long-long
+# --enable-__cxa_atexit --enable-clocale=gnu --disable-libunwind-exceptions
+# --enable-languages=c,c++,f77,objc,java --host=i586-mandrake-linux-gnu
+# --with-system-zlib
+# --with-sysroot=DIR --with-headers=DIR --without-headers --with-libs=``DIR1 DIR2 ... DIRN'' 
+#
+# ../gcc-3.4.0/configure --target=arm-linux --prefix=/usr/local/arm920/3.4.0 --host=i686-pc-linux-gnu --with-cpu=arm9 \
+# --with-headers=/usr/src/arm920/elroy-jack/sw/linux-2.6.6/include --disable-shared --disable-threads --enable-languages=c \
+# --with-float=soft --disable-nls --enable--symvers=gnu --enable-__cxa_atexit
+# make
+# make install
+#
+# ../glibc-2.3.2/configure --host=arm-linux --build=i686-pc-linux-gnu \
+# --with-headers=/usr/src/arm920/elroy-jack/sw/linux-2.6.6/include  \
+# --enable-add-ons=linuxthreads --enable-shared --prefix=/usr/local/arm920/3.4.0 \
+# --with-cpu=arm9 --without-fp --enable-kernel=2.6.6
+# make
+# make install
+
+../../../gcc/configure --target=arm-rtems --prefix=/usr \
+            --with-cpu=arm9 \
+             --enable-languages=c,c++ \
+            --with-gnu-ld \
+            --with-float=soft \
+            --enable-threads=rtems \
+            --enable-target-optspace \
+             --verbose \
+            --disable-nls \
+             --host=i586-pc-linux-gnu \
+            --with-newlib
diff --git a/rtems-build/m68k-mo376/binutils/binutils-m68k-rtems.cfg b/rtems-build/m68k-mo376/binutils/binutils-m68k-rtems.cfg
new file mode 100644 (file)
index 0000000..6ebdece
--- /dev/null
@@ -0,0 +1,164 @@
+#Usage: configure [OPTIONS] [HOST]
+#
+#Options: [defaults in brackets]
+# --prefix=MYDIR                install into MYDIR [/usr/local]
+# --exec-prefix=MYDIR   install host-dependent files into MYDIR [/usr/local]
+# --help                        print this message [normal config]
+# --build=BUILD                 configure for building on BUILD [BUILD=HOST]
+# --host=HOST           configure for HOST [determined via config.guess]
+# --norecursion                 configure this directory only [recurse]
+# --program-prefix=FOO  prepend FOO to installed program names [""]
+# --program-suffix=FOO  append FOO to installed program names [""]
+# --program-transform-name=P transform installed names by sed pattern P [""]
+# --site=SITE           configure with site-specific makefile for SITE
+# --srcdir=DIR          find the sources in DIR [. or ..]
+# --target=TARGET       configure for TARGET [TARGET=HOST]
+# --tmpdir=TMPDIR       create temporary files in TMPDIR [/tmp]
+# --nfp                         configure for software floating point [hard float]
+# --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)
+# --without-FOO                 package FOO is NOT available
+# --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)
+# --disable-FOO                 do not include feature FOO
+#
+#Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.
+#
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=no]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-targets        alternative target configurations
+#  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library
+#  --with-mmap             try using mmap for BFD input files if available
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=yes]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-targets        alternative target configurations
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+
+# --target=i586-pc-linux-gnulibc1
+# --target=i586-mingw32
+# --target=m68k-coff
+# --target=m68k-linux-gnulibc1
+# --target=h8300-hitachi-coff
+# --target=tic30-ti-coff
+# --host=i586-pc-linux-gnulibc1 
+CFLAGS=-O2 LDFLAGS=-s \
+../../../binutils/configure \
+--host=i586-pc-linux-gnu  \
+--target=m68k-rtems \
+--with-gnu-ld --exec-prefix=/usr --prefix=/usr \
+--enable-shared --enable-commonbfdlib --verbose \
+--with-mmap --enable-64-bit-bfd \
+--enable-targets=i586-pc-linux-gnu,i586-pc-linux-gnulibc1,\
+i386-coff,i586-msdosdjgpp\
+m68k-linux-elf,m68k-coff,m68k-a.out-linux,\
+powerpc-rtems,m68hc11-elf,m68hc12-elf,\
+h8300-coff,sh-coff,sh-rtemself,\
+sparc-linux-elf,i586-win-pe,tic30-ti-coff,tic30-ti-aout
+#i586-go32,
+#--ieee,
+#srec,symbolsrec,tekhex,binary,ihex,trad-core
diff --git a/rtems-build/m68k-mo376/gcc/gcc-m68k-rtems.cfg b/rtems-build/m68k-mo376/gcc/gcc-m68k-rtems.cfg
new file mode 100644 (file)
index 0000000..23f7a7e
--- /dev/null
@@ -0,0 +1,365 @@
+# Usage: configure [options] [host]
+# Options: [defaults in brackets after descriptions]
+# Configuration:
+#   --cache-file=FILE       cache test results in FILE
+#   --help                  print this message
+#   --no-create             do not create output files
+#   --quiet, --silent       do not print `checking...' messages
+#   --version               print the version of autoconf that created configure
+# Directory and file names:
+#   --prefix=PREFIX         install architecture-independent files in PREFIX
+#                           [/usr/local]
+#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                           [same as prefix]
+#   --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#   --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#   --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#   --datadir=DIR           read-only architecture-independent data in DIR
+#                           [PREFIX/share]
+#   --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#   --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                           [PREFIX/com]
+#   --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#   --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#   --includedir=DIR        C header files in DIR [PREFIX/include]
+#   --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#   --infodir=DIR           info documentation in DIR [PREFIX/info]
+#   --mandir=DIR            man documentation in DIR [PREFIX/man]
+#   --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#   --program-prefix=PREFIX prepend PREFIX to installed program names
+#   --program-suffix=SUFFIX append SUFFIX to installed program names
+#   --program-transform-name=PROGRAM
+#                           run sed PROGRAM on installed program names
+# Host type:
+#   --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#   --host=HOST             configure for HOST [guessed]
+#   --target=TARGET         configure for TARGET [TARGET=HOST]
+# Features and packages:
+#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#   --x-includes=DIR        X include files are in DIR
+#   --x-libraries=DIR       X library files are in DIR
+# --enable and --with options recognized:
+#   --with-gnu-ld           arrange to work with GNU ld.
+#   --with-gnu-as           arrange to work with GNU as.
+#   --with-stabs            arrange to use stabs instead of host debug format.
+#   --with-elf              arrange to use ELF instead of host debug format.
+#   --with-local-prefix=DIR specifies directory to put local include.
+#   --with-gxx-include-dir=DIR
+#                           specifies directory to put g++ header files.
+#   --enable-checking       enable expensive run-time checks.
+#   --enable-c-cpplib       Use cpplib for C.
+#   --enable-haifa          Use the experimental scheduler.
+#   --disable-haifa         Don't use the experimental scheduler for the
+#                           targets which normally enable it.
+#   --with-fast-fixincludes    Use a faster fixinclude program.  Experimental
+#   --enable-threads        enable thread usage for target GCC.
+#   --enable-threads=LIB    use LIB thread package for target GCC.
+# 
+
+#      *-*-gnu*)
+#      *-*-linux-gnu*)
+#      *-*-sysv*)
+#      *-*-sysv4*)
+#      1750a-*-*)
+#      a29k-*-*)                       # Default a29k environment.
+#      a29k-*-bsd* | a29k-*-sym1*)
+#      a29k-*-udi | a29k-*-coff)
+#      a29k-wrs-vxworks*)
+#      alpha*-*-*)
+#      alpha*-*-linux-gnu*)
+#      alpha*-*-linux-gnuecoff*)
+#      alpha*-*-linux-gnulibc1*)
+#      alpha*-*-netbsd*)
+#      alpha*-*-vxworks*)
+#      alpha*-*-winnt*)
+#      alpha*-dec-osf*)
+#      alpha*-dec-vms*)
+#      arc-*-elf*)
+#      arm*-*-*)
+#      arm*-*-netbsd*)
+#      arm-*-aout)
+#      arm-*-coff* | armel-*-coff*)
+#      arm-*-linux-gnuaout*)           # ARM GNU/Linux
+#      arm-*-riscix*)                  # Acorn RISC machine
+#      arm-*-riscix1.[[01]]*)          # Acorn RISC machine (early versions)
+#      arm-semi-aof | armel-semi-aof)
+#      arm-semi-aout | armel-semi-aout)
+#      c1-convex-*)                    # Convex C1
+#      c2-convex-*)                    # Convex C2
+#      c32-convex-*)
+#      c34-convex-*)
+#      c38-convex-*)
+#      case $machine in
+#      case $machine in
+#      clipper-intergraph-clix*)
+#      dsp16xx-*)
+#      elxsi-elxsi-*)
+#      esac
+#      esac
+#      esac
+#      h8300-*-*)
+#      hppa*-*-lites*)
+#      hppa1.0-*-bsd*)
+#      hppa1.0-*-hiux*)
+#      hppa1.0-*-hpux*)
+#      hppa1.0-*-hpux10*)
+#      hppa1.0-*-hpux7*)
+#      hppa1.0-*-hpux8*)
+#      hppa1.0-*-hpux8.0[[0-2]]*)
+#      hppa1.0-*-osf*)
+#      hppa1.1-*-bsd*)
+#      hppa1.1-*-hiux*)
+#      hppa1.1-*-hpux*)
+#      hppa1.1-*-hpux10*)
+#      hppa1.1-*-hpux8*)
+#      hppa1.1-*-hpux8.0[[0-2]]*)
+#      hppa1.1-*-osf*)
+#      hppa1.1-*-pro*)
+#      hppa1.1-*-rtems*)
+#      i370-*-mvs*)
+#      i386-*-vsta)                    # Intel 80386's running VSTa kernel
+#      i386-sun-sunos*)                # Sun i386 roadrunner
+#      i486-*-*)
+#      i586-*-*)
+#      i686-*-* | i786-*-*)
+#      i860-*-bsd*)
+#      i860-*-mach*)
+#      i860-*-osf*)                    # Intel Paragon XP/S, OSF/1AD
+#      i860-*-sysv3*)
+#      i860-*-sysv4*)
+#      i860-alliant-*)         # Alliant FX/2800
+#      i960-*-*)                       # Default i960 environment.
+#      i960-*-coff*)
+#      i960-*-rtems)
+#      i960-wrs-vxworks*)
+#      i960-wrs-vxworks5 | i960-wrs-vxworks5.0*)
+#      i960-wrs-vxworks5* | i960-wrs-vxworks)
+#      i[[34567]]86-*-aout*)
+#      i[[34567]]86-*-bsd*)
+#      i[[34567]]86-*-bsdi* | i[[34567]]86-*-bsd386*)
+#      i[[34567]]86-*-coff*)
+#      i[[34567]]86-*-freebsd*)
+#      i[[34567]]86-*-freebsdelf*)
+#      i[[34567]]86-*-gnu*)
+#      i[[34567]]86-*-isc*)            # 80386 running ISC system
+#      i[[34567]]86-*-linux-gnu*)      # Intel 80386's running GNU/Linux
+#      i[[34567]]86-*-linux-gnuaout*)  # Intel 80386's running GNU/Linux
+#      i[[34567]]86-*-linux-gnulibc1)  # Intel 80386's running GNU/Linux
+#      i[[34567]]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
+#      i[[34567]]86-*-lynxos*)
+#      i[[34567]]86-*-mach*)
+#      i[[34567]]86-*-mingw32*)
+#      i[[34567]]86-*-netbsd*)
+#      i[[34567]]86-*-osf1*)           # Intel 80386's running OSF/1 1.3+
+#      i[[34567]]86-*-osfrose*)                # 386 using OSF/rose
+#      i[[34567]]86-*-pe | i[[34567]]86-*-cygwin32)
+#      i[[34567]]86-*-rtems*)
+#      i[[34567]]86-*-rtemself*)
+#      i[[34567]]86-*-sco*)            # 80386 running SCO system
+#      i[[34567]]86-*-sco3.2v4*)       # 80386 running SCO 3.2v4 system
+#      i[[34567]]86-*-sco3.2v5*)       # 80386 running SCO Open Server 5
+#      i[[34567]]86-*-solaris2*)
+#      i[[34567]]86-*-sysv*)           # Intel 80386's running system V
+#      i[[34567]]86-*-sysv4*)          # Intel 80386's running system V.4
+#      i[[34567]]86-*-sysv5*)           # Intel x86 on System V Release 5
+#      i[[34567]]86-*-winnt3*)
+#      i[[34567]]86-dg-dgux*)
+#      i[[34567]]86-go32-msdos | i[[34567]]86-*-go32*)
+#      i[[34567]]86-go32-rtems*)
+#      i[[34567]]86-ibm-aix*)          # IBM PS/2 running AIX
+#      i[[34567]]86-moss-msdos* | i[[34567]]86-*-moss*)
+#      i[[34567]]86-ncr-sysv4*)        # NCR 3000 - ix86 running system V.4
+#      i[[34567]]86-next-*)
+#      i[[34567]]86-pc-msdosdjgpp*)
+#      i[[34567]]86-sequent-bsd*)              # 80386 from Sequent
+#      i[[34567]]86-sequent-ptx1*)
+#      i[[34567]]86-sequent-ptx2* | i[[34567]]86-sequent-sysv3*)
+#      i[[34567]]86-sequent-ptx4* | i[[34567]]86-sequent-sysv4*)
+#      i[[34567]]86-wrs-vxworks*)
+#      if [[ "$target_cpu_default2" != "" ]]
+#      m32r-*-elf*)
+#      m68000-att-sysv*)
+#      m68000-convergent-sysv*)
+#      m68000-hp-bsd*)                 # HP 9000/200 running BSD
+#      m68000-hp-hpux*)                # HP 9000 series 300
+#      m68000-sun-sunos3*)
+#      m68000-sun-sunos4*)
+#      m68k*-*-netbsd*)
+#      m68k-*-aout*)
+#      m68k-*-coff*)
+#      m68k-*-linux-gnu*)              # Motorola m68k's running GNU/Linux
+#      m68k-*-linux-gnuaout*)          # Motorola m68k's running GNU/Linux
+#      m68k-*-linux-gnulibc1)          # Motorola m68k's running GNU/Linux
+#      m68k-*-lynxos*)
+#      m68k-*-psos*)
+#      m68k-*-rtems*)
+#      m68k-*-sysv3*)                  # Motorola m68k's running system V.3
+#      m68k-*-sysv4*)                  # Motorola m68k's running system V.4
+#      m68k-altos-sysv*)                  # Altos 3068
+#      m68k-apollo-*)
+#      m68k-apple-aux*)                # Apple Macintosh running A/UX
+#      m68k-atari-sysv4*)              # Atari variant of V.4.
+#      m68k-bull-sysv*)                # Bull DPX/2
+#      m68k-cbm-sysv4*)                # Commodore variant of V.4.
+#      m68k-ccur-rtu)
+#      m68k-crds-unos*)
+#      m68k-hp-bsd*)                   # HP 9000/3xx running Berkeley Unix
+#      m68k-hp-bsd4.4*)                # HP 9000/3xx running 4.4bsd
+#      m68k-hp-hpux*)  # HP 9000 series 300
+#      m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
+#      m68k-isi-bsd*)
+#      m68k-motorola-sysv*)
+#      m68k-ncr-sysv*)                 # NCR Tower 32 SVR3
+#      m68k-next-nextstep2*)
+#      m68k-next-nextstep3*)
+#      m68k-plexus-sysv*)
+#      m68k-sony-bsd* | m68k-sony-newsos*)
+#      m68k-sony-newsos3*)
+#      m68k-sun-mach*)
+#      m68k-sun-sunos*)                        # For SunOS 4 (the default).
+#      m68k-sun-sunos3*)
+#      m68k-tti-*)
+#      m68k-wrs-vxworks*)
+#      m88k-*-aout*)
+#      m88k-*-coff*)
+#      m88k-*-luna*)
+#      m88k-*-sysv3*)
+#      m88k-*-sysv4*)
+#      m88k-dg-dgux*)
+#      m88k-dolphin-sysv3*)
+#      m88k-tektronix-sysv3)
+#      mips*-*-*)
+#      mips*-*-ecoff* | mips*-*-elf*)
+#      mips-*-*)                               # Default MIPS RISC-OS 4.0.
+#      mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[[1234]]bsd*)
+#      mips-*-ecoff*)
+#      mips-*-elf*)
+#      mips-*-gnu*)
+#      mips-*-riscos[[56789]]*)                # Default MIPS RISC-OS 5.0.
+#      mips-*-riscos[[56789]]bsd*)
+#      mips-*-riscos[[56789]]sysv*)
+#      mips-*-riscos[[56789]]sysv4*)
+#      mips-*-sysv* | mips-*-riscos*sysv*)
+#      mips-*-sysv4* | mips-*-riscos[[1234]]sysv4* | mips-*-riscossysv4*)
+#      mips-*-ultrix* | mips-dec-mach3)        # Decstation.
+#      mips-dec-bsd*)                  # Decstation running 4.4 BSD
+#      mips-dec-osf*)                  # Decstation running OSF/1 as shipped by DIGITAL
+#      mips-dec-osfrose*)              # Decstation running OSF/1 reference port with OSF/rose.
+#      mips-sgi-*)                     # Mostly like a MIPS.
+#      mips-sgi-irix4*)                # Mostly like a MIPS.
+#      mips-sgi-irix4loser*)           # Mostly like a MIPS.
+#      mips-sgi-irix5*)                # SGI System V.4., IRIX 5
+#      mips-sgi-irix5cross64)          # Irix5 host, Irix 6 target, cross64
+#      mips-sgi-irix6*)                # SGI System V.4., IRIX 6
+#      mips-sni-sysv4)
+#      mips-sony-bsd* | mips-sony-newsos*)     # Sony NEWS 3600 or risc/news.
+#      mips-sony-sysv*)                # Sony NEWS 3800 with NEWSOS5.0.
+#      mips-tandem-sysv4*)             # Tandem S2 running NonStop UX
+#      mips-wrs-vxworks)
+#      mips64-*-elf*)
+#      mips64el-*-elf*)
+#      mips64orion-*-elf*)
+#      mips64orion-*-rtems*)
+#      mips64orionel-*-elf*)
+#      mipsel-*-ecoff*)
+#      mipsel-*-elf*)
+#      mipsel-*-netbsd* | mips-dec-netbsd*)    # Decstation running NetBSD
+#      mipstx39-*-elf*)
+#      mipstx39el-*-elf*)
+#      mn10200-*-*)
+#      mn10300-*-*)
+#      ns32k-*-netbsd*)
+#      ns32k-encore-bsd*)
+#      ns32k-merlin-*)
+#      ns32k-pc532-mach*)
+#      ns32k-pc532-minix*)
+#      ns32k-sequent-bsd*)
+#      ns32k-tek6100-bsd*)
+#      ns32k-tek6200-bsd*)
+#      pdp11-*-*)
+#      pdp11-*-bsd)
+#      powerpc*-*-* | rs6000-*-*)
+#      powerpc-*-beos*)
+#      powerpc-*-eabi*)
+#      powerpc-*-eabiaix*)
+#      powerpc-*-eabisim*)
+#      powerpc-*-linux-gnu*)
+#      powerpc-*-linux-gnulibc1)
+#      powerpc-*-rtems*)
+#      powerpc-*-sysv* | powerpc-*-elf*)
+#      powerpc-wrs-vxworks*)
+#      powerpcle-*-eabi*)
+#      powerpcle-*-eabisim*)
+#      powerpcle-*-pe | powerpcle-*-cygwin32)
+#      powerpcle-*-solaris2*)
+#      powerpcle-*-sysv* | powerpcle-*-elf*)
+#      powerpcle-*-winnt* )
+#      pyramid-*-*)
+#      romp-*-aos*)
+#      romp-*-mach*)
+#      rs6000-*-lynxos*)
+#      rs6000-*-mach*)
+#      rs6000-bull-bosx)
+#      rs6000-ibm-aix*)
+#      rs6000-ibm-aix3.2.[[456789]]* | powerpc-ibm-aix3.2.[[456789]]*)
+#      rs6000-ibm-aix3.[[01]]*)
+#      rs6000-ibm-aix4.[[12]]* | powerpc-ibm-aix4.[[12]]*)
+#      rs6000-ibm-aix4.[[3456789]].* | powerpc-ibm-aix4.[[3456789]].*)
+#      rs6000-ibm-aix[[56789]].* | powerpc-ibm-aix[[56789]].*)
+#      sh-*-*)
+#      sh-*-elf*)
+#      sh-*-rtems*)
+#      sh-*-rtemself*)
+#      sparc*-*-*)
+#      sparc-*-aout*)
+#      sparc-*-bsd*)
+#      sparc-*-elf*)
+#      sparc-*-linux-gnu*)             # Sparc's running GNU/Linux, libc6
+#      sparc-*-linux-gnuaout*)         # Sparc's running GNU/Linux, a.out
+#      sparc-*-linux-gnulibc1*)        # Sparc's running GNU/Linux, libc5
+#      sparc-*-lynxos*)
+#      sparc-*-netbsd*)
+#      sparc-*-rtems*)
+#      sparc-*-solaris2*)
+#      sparc-*-sunos3*)
+#      sparc-*-sunos4*)
+#      sparc-*-sunos4.0*)
+#      sparc-*-sysv4*)
+#      sparc-*-vxsim*)
+#      sparc-tti-*)
+#      sparc-wrs-vxworks* | sparclite-wrs-vxworks*)
+#      sparc64-*-aout*)
+#      sparc64-*-elf*)
+#      sparc64-*-linux*)               # 64-bit Sparc's running GNU/Linux
+#      sparclet-*-aout*)
+#      sparclite-*-aout*)
+#      sparclite-*-coff*)
+#      target_cpu_default2=
+#      thumb-*-coff* | thumbel-*-coff*)
+#      v850-*-*)
+#      vax-*-*)                        # vax default entry
+#      vax-*-bsd*)                     # vaxen running BSD
+#      vax-*-netbsd*)
+#      vax-*-sysv*)                    # vaxen running system V
+#      vax-*-ultrix*)                  # vaxen running ultrix
+#      vax-*-vms*)                     # vaxen running VMS
+#      we32k-att-sysv*)
+
+# --target=m68k-linux-gnulibc1
+# --enable-version-specific-runtime-libs
+# --with-float=soft \
+
+../../../gcc/configure --prefix=/usr \
+            --target=m68k-rtems \
+             --with-gnu-ld \
+            --with-gnu-as \
+            --with-newlib \
+             --enable-languages=c,c++ \
+            --enable-threads=rtems \
+             --verbose \
+            --disable-nls \
+             --host=i586-pc-linux-gnu \
+            --with-newlib
diff --git a/rtems-build/powerpc-rtems/binutils/binutils-powerpc-rtems.cfg b/rtems-build/powerpc-rtems/binutils/binutils-powerpc-rtems.cfg
new file mode 100644 (file)
index 0000000..34d97e7
--- /dev/null
@@ -0,0 +1,168 @@
+#Usage: configure [OPTIONS] [HOST]
+#
+#Options: [defaults in brackets]
+# --prefix=MYDIR                install into MYDIR [/usr/local]
+# --exec-prefix=MYDIR   install host-dependent files into MYDIR [/usr/local]
+# --help                        print this message [normal config]
+# --build=BUILD                 configure for building on BUILD [BUILD=HOST]
+# --host=HOST           configure for HOST [determined via config.guess]
+# --norecursion                 configure this directory only [recurse]
+# --program-prefix=FOO  prepend FOO to installed program names [""]
+# --program-suffix=FOO  append FOO to installed program names [""]
+# --program-transform-name=P transform installed names by sed pattern P [""]
+# --site=SITE           configure with site-specific makefile for SITE
+# --srcdir=DIR          find the sources in DIR [. or ..]
+# --target=TARGET       configure for TARGET [TARGET=HOST]
+# --tmpdir=TMPDIR       create temporary files in TMPDIR [/tmp]
+# --nfp                         configure for software floating point [hard float]
+# --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)
+# --without-FOO                 package FOO is NOT available
+# --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)
+# --disable-FOO                 do not include feature FOO
+#
+#Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.
+#
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=no]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-targets        alternative target configurations
+#  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library
+#  --with-mmap             try using mmap for BFD input files if available
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#Usage: configure [options] [host]
+#Options: [defaults in brackets after descriptions]
+#Configuration:
+#  --cache-file=FILE       cache test results in FILE
+#  --help                  print this message
+#  --no-create             do not create output files
+#  --quiet, --silent       do not print `checking...' messages
+#  --version               print the version of autoconf that created configure
+#Directory and file names:
+#  --prefix=PREFIX         install architecture-independent files in PREFIX
+#                          [/usr/local]
+#  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                          [same as prefix]
+#  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+#  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+#  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+#  --datadir=DIR           read-only architecture-independent data in DIR
+#                          [PREFIX/share]
+#  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+#  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+#                          [PREFIX/com]
+#  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+#  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+#  --includedir=DIR        C header files in DIR [PREFIX/include]
+#  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+#  --infodir=DIR           info documentation in DIR [PREFIX/info]
+#  --mandir=DIR            man documentation in DIR [PREFIX/man]
+#  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+#  --program-prefix=PREFIX prepend PREFIX to installed program names
+#  --program-suffix=SUFFIX append SUFFIX to installed program names
+#  --program-transform-name=PROGRAM
+#                          run sed PROGRAM on installed program names
+#Host type:
+#  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+#  --host=HOST             configure for HOST [guessed]
+#  --target=TARGET         configure for TARGET [TARGET=HOST]
+#Features and packages:
+#  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#  --x-includes=DIR        X include files are in DIR
+#  --x-libraries=DIR       X library files are in DIR
+#--enable and --with options recognized:
+#  --enable-shared[=PKGS]  build shared libraries [default=yes]
+#  --enable-static[=PKGS]  build static libraries [default=yes]
+#  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]
+#  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+#  --disable-libtool-lock  avoid locking (might break parallel builds)
+#  --with-pic              try to use only PIC/non-PIC objects [default=use both]
+#  --enable-targets        alternative target configurations
+#  --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
+#  --enable-build-warnings Enable build-time compiler warnings if gcc is used
+#  --disable-nls           do not use Native Language Support
+#  --with-included-gettext use the GNU gettext library included here
+#  --enable-maintainer-mode enable make rules and dependencies not useful
+#                          (and sometimes confusing) to the casual installer
+
+# --target=i586-pc-linux-gnulibc1
+# --target=i586-mingw32
+# --target=m68k-coff
+# --target=m68k-linux-gnulibc1
+# --target=h8300-hitachi-coff
+# --target=tic30-ti-coff
+# --host=i586-pc-linux-gnulibc1 
+CFLAGS=-O2 LDFLAGS=-s \
+../../configure \
+--host=i586-pc-linux-gnu  \
+--target=powerpc-rtems \
+--with-gnu-ld --exec-prefix=/usr --prefix=/usr \
+--enable-shared --enable-commonbfdlib --verbose \
+--with-mmap --enable-64-bit-bfd \
+--enable-targets=i586-pc-linux-gnu,i586-pc-linux-gnulibc1,\
+i386-coff,i586-msdosdjgpp,\
+m68k-linux-elf,m68k-rtems,m68k-coff,m68k-a.out-linux,\
+powerpc-rtems,powerpc-linux,m68hc11-elf,m68hc12-elf,\
+h8300-coff,h8300-elf,sh-coff,sh-rtemself,sh64-linux,\
+or32-elf,openrisc-elf,alpha-linux-gnu,\
+ia64-linux-gnu,x86_64-linux-gnu,\
+arm-rtems,arm-linux,arm-pe,arm-coff,avr-elf,\
+sparc-linux-elf,i586-win-pe,\
+tic30-ti-coff,tic30-ti-aout,tic4x-ti-coff,tic54x-ti-coff,msp430
+#i586-go32,
+#--ieee,
+#srec,symbolsrec,tekhex,binary,ihex,trad-core
diff --git a/rtems-build/powerpc-rtems/gcc/gcc-powerpc-rtems.cfg b/rtems-build/powerpc-rtems/gcc/gcc-powerpc-rtems.cfg
new file mode 100644 (file)
index 0000000..1a76555
--- /dev/null
@@ -0,0 +1,169 @@
+# `configure' configures this package to adapt to many kinds of systems.
+# 
+# Usage: ../../gcc/configure [OPTION]... [VAR=VALUE]...
+# 
+# To assign environment variables (e.g., CC, CFLAGS...), specify them as
+# VAR=VALUE.  See below for descriptions of some of the useful variables.
+# 
+# Defaults for the options are specified in brackets.
+# 
+# Configuration:
+#   -h, --help              display this help and exit
+#       --help=short        display options specific to this package
+#       --help=recursive    display the short help of all the included packages
+#   -V, --version           display version information and exit
+#   -q, --quiet, --silent   do not print `checking...' messages
+#       --cache-file=FILE   cache test results in FILE [disabled]
+#   -C, --config-cache      alias for `--cache-file=config.cache'
+#   -n, --no-create         do not create output files
+#       --srcdir=DIR        find the sources in DIR [configure dir or `..']
+# 
+# Installation directories:
+#   --prefix=PREFIX         install architecture-independent files in PREFIX
+#                           [/usr/local]
+#   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+#                           [PREFIX]
+# 
+# By default, `make install' will install all the files in
+# `/usr/local/bin', `/usr/local/lib' etc.  You can specify
+# an installation prefix other than `/usr/local' using `--prefix',
+# for instance `--prefix=$HOME'.
+# 
+# For better control, use the options below.
+# 
+# Fine tuning of the installation directories:
+#   --bindir=DIR           user executables [EPREFIX/bin]
+#   --sbindir=DIR          system admin executables [EPREFIX/sbin]
+#   --libexecdir=DIR       program executables [EPREFIX/libexec]
+#   --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+#   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+#   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+#   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+#   --libdir=DIR           object code libraries [EPREFIX/lib]
+#   --includedir=DIR       C header files [PREFIX/include]
+#   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+#   --infodir=DIR          info documentation [PREFIX/info]
+#   --mandir=DIR           man documentation [PREFIX/man]
+# 
+# Program names:
+#   --program-prefix=PREFIX            prepend PREFIX to installed program names
+#   --program-suffix=SUFFIX            append SUFFIX to installed program names
+#   --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+# 
+# System types:
+#   --build=BUILD     configure for building on BUILD [guessed]
+#   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+#   --target=TARGET   configure for building compilers for TARGET [HOST]
+# 
+# Optional Features:
+#   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+#   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+#   --enable-generated-files-in-srcdir
+#                           put copies of generated files in source dir
+#                           intended for creating source tarballs for users
+#                           without texinfo bison or flex.
+#   --enable-werror         enable -Werror in bootstrap stage2 and later
+#   --enable-checking=LIST
+#                        enable expensive run-time checks.  With LIST,
+#                        enable only specific categories of checks.
+#                        Categories are: misc,tree,rtl,rtlflag,gc,gcac,fold;
+#                        default is no checking
+#   --enable-coverage=LEVEL
+#                        enable compiler\'s code coverage collection.
+#                        Use to measure compiler performance and locate
+#                        unused parts of the compiler. With LEVEL, specify
+#                        optimization. Values are opt, noopt,
+#                        default is noopt
+#   --enable-gather-detailed-mem-stats         enable detailed memory allocation stats gathering
+#   --enable-multilib       enable library support for multiple ABIs
+#   --enable-__cxa_atexit   enable __cxa_atexit for C++
+#   --enable-threads        enable thread usage for target GCC
+#   --enable-threads=LIB    use LIB thread package for target GCC
+#   --enable-objc-gc     enable the use of Boehm's garbage collector with
+#                        the GNU Objective-C runtime
+#   --disable-shared        don't provide a shared libgcc
+#   --enable-intermodule    build the compiler in one step
+#   --enable-initfini-array    use .init_array/.fini_array sections
+#   --enable-sjlj-exceptions
+#                           arrange to use setjmp/longjmp exception handling
+#   --enable-libunwind-exceptions  force use libunwind for exceptions
+#   --disable-win32-registry
+#                           disable lookup of installation paths in the
+#                           Registry on Windows hosts
+#   --enable-win32-registry enable registry lookup (default)
+#   --enable-win32-registry=KEY
+#                           use KEY instead of GCC version as the last portion
+#                           of the registry key
+#   --enable-maintainer-mode
+#                           enable make rules and dependencies not useful
+#                           (and sometimes confusing) to the casual installer
+#   --enable-version-specific-runtime-libs
+#                           specify that runtime libraries should be
+#                           installed in a compiler-specific directory
+# 
+# Optional Packages:
+#   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+#   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+#   --with-local-prefix=DIR specifies directory to put local include
+#   --with-gxx-include-dir=DIR
+#                           specifies directory to put g++ header files
+#   --with-cpp-install-dir=DIR
+#                           install the user visible C preprocessor in DIR
+#                           (relative to PREFIX) as well as PREFIX/bin
+#   --with-gnu-ld           arrange to work with GNU ld.
+#   --with-ld               arrange to use the specified ld (full pathname)
+#   --with-gnu-as           arrange to work with GNU as
+#   --with-as               arrange to use the specified as (full pathname)
+#   --with-stabs            arrange to use stabs instead of host debug format
+#   --with-dwarf2           force the default debug format to be DWARF 2
+#   --with-sysroot=DIR Search for usr/lib, usr/include, et al, within DIR.
+#   --with-libiconv-prefix=DIR  search for libiconv in DIR/include and DIR/lib
+#   --with-gc={simple,page,zone} choose the garbage collection mechanism to use
+#                           with the compiler
+#   --with-system-zlib      use installed libz
+#   --with-slibdir=DIR      shared libraries in DIR LIBDIR
+# 
+# Some influential environment variables:
+#   CC          C compiler command
+#   CFLAGS      C compiler flags
+#   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+#               nonstandard directory <lib dir>
+#   CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+#               headers in a nonstandard directory <include dir>
+#   CPP         C preprocessor
+# 
+# Use these variables to override the choices made by `configure' or to help
+# it to find libraries and programs with nonstandard names/locations.
+# 
+# ../configure --prefix=/usr --libdir=/usr/lib --with-slibdir=/lib
+# --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared 
+# --enable-threads=posix --disable-checking --enable-long-long
+# --enable-__cxa_atexit --enable-clocale=gnu --disable-libunwind-exceptions
+# --enable-languages=c,c++,f77,objc,java --host=i586-mandrake-linux-gnu
+# --with-system-zlib
+# --with-sysroot=DIR --with-headers=DIR --without-headers --with-libs=``DIR1 DIR2 ... DIRN'' 
+#
+# ../gcc-3.4.0/configure --target=arm-linux --prefix=/usr/local/arm920/3.4.0 --host=i686-pc-linux-gnu --with-cpu=arm9 \
+# --with-headers=/usr/src/arm920/elroy-jack/sw/linux-2.6.6/include --disable-shared --disable-threads --enable-languages=c \
+# --with-float=soft --disable-nls --enable--symvers=gnu --enable-__cxa_atexit
+# make
+# make install
+#
+# ../glibc-2.3.2/configure --host=arm-linux --build=i686-pc-linux-gnu \
+# --with-headers=/usr/src/arm920/elroy-jack/sw/linux-2.6.6/include  \
+# --enable-add-ons=linuxthreads --enable-shared --prefix=/usr/local/arm920/3.4.0 \
+# --with-cpu=arm9 --without-fp --enable-kernel=2.6.6
+# --with-cpu=405
+# make
+# make install
+
+../../configure --target=powerpc-rtems --prefix=/usr \
+             --enable-languages=c,c++ \
+            --with-gnu-ld \
+            --with-float=soft \
+            --enable-threads=rtems \
+            --enable-target-optspace \
+             --verbose \
+            --disable-nls \
+             --host=i586-pc-linux-gnu \
+            --with-newlib