X-Git-Url: http://rtime.felk.cvut.cz/gitweb/rtems-devel.git/blobdiff_plain/b43d26bd4d8cb9dda0fe9be21883dffde1f775af..e3003e37814bd44142fd2965a72b8f8b9c95dfb4:/rtems-patches/current/rtems-update-ss555-to-ec555.patch diff --git a/rtems-patches/current/rtems-update-ss555-to-ec555.patch b/rtems-patches/current/rtems-update-ss555-to-ec555.patch deleted file mode 100644 index 3b3fb3f..0000000 --- a/rtems-patches/current/rtems-update-ss555-to-ec555.patch +++ /dev/null @@ -1,134 +0,0 @@ ---- - c/src/lib/libbsp/powerpc/ec555/ChangeLog | 5 +++++ - c/src/lib/libbsp/powerpc/ec555/README | 18 +++++++++--------- - c/src/lib/libbsp/powerpc/ec555/configure.ac | 2 +- - make/custom/ec555.cfg | 6 +++--- - 4 files changed, 18 insertions(+), 13 deletions(-) - -Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/ChangeLog -=================================================================== ---- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/ChangeLog 2008-12-08 06:15:50.000000000 +0100 -+++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/ChangeLog 2009-11-29 01:49:00.499560796 +0100 -@@ -1,3 +1,8 @@ -+2009-11-27 Pavel Pisa -+ -+ * EC555 BSP for Wuerz-elektronik EC555 board started -+ as clone of SS555 BSP. -+ - 2008-12-08 Ralf Corsépius - - * bsp_specs: Backport from CVS-HEAD. -Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/README -=================================================================== ---- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/README 2009-11-29 01:38:37.608590025 +0100 -+++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/README 2009-11-29 01:47:01.416556469 +0100 -@@ -2,9 +2,9 @@ - # $Id: README,v 1.1 2004/04/12 21:52:13 joel Exp $ - # - --This is a README file for the Intec SS555 of RTEMS 4.6.0 -+This is a README file for the Wuerz-elektronik EC555 of RTEMS 4.6.0 - --The SS555 port was sponsored by Defence Research and Development -+The EC555 port was sponsored by Defence Research and Development - Canada - Suffield, and is Copyright (C) 2004, Real-Time Systems Inc. - - Please send any comments, improvements, or bug reports to: -@@ -16,8 +16,8 @@ - Summary - ------- - --BSP NAME: ss555 --BOARD: Intec Automation Inc. SS555 -+BSP NAME: EC555 -+BOARD: Wuerz-elektronik EC555 - BUS: None - CPU FAMILY: PowerPC - CPU: PowerPC MPC555 -@@ -88,7 +88,7 @@ - Installation - ------------ - --The ss555 port uses the Intec SS555's external RAM in two different ways, -+The EC555 port uses the Wuerz-elektronik EC555's external RAM in two different ways, - depending on whether or not it is built for debugging by giving the - VARIANT=DEBUG switch to make: - -@@ -112,7 +112,7 @@ - - This BSP includes an termios-capable asynchronous serial line driver that - supports SCI1 and SCI2. The RTEMS console is selected at configuration time --with the CONSOLE_MINOR variable (see .../ss555/configure.ac). We default to -+with the CONSOLE_MINOR variable (see .../ec555/configure.ac). We default to - SCI2 for the console, since SCI1 has some extra features which may be - desired for application use. - -@@ -123,7 +123,7 @@ - 3. interrupt-driven I/O with termios support. - - The mode of operation of the serial driver is determined at configure time in --part by the value of the UARTS_IO_MODE variable (see .../ss555/configure.ac). -+part by the value of the UARTS_IO_MODE variable (see .../ec555/configure.ac). - - 0 - polled I/O. - 1 - interrupt-driven I/O. -@@ -208,7 +208,7 @@ - Test Configuration - ------------------ - --Board: Intec SS555 v1.1 -+Board: Wuerz-elektronik EC555 v1.1 - CPU: Motorola MPC555LFMZP40, mask 1K83H - Clock Speed: Crystal 4.0 MHz, CPU 40.0 MHz - RAM: 512K bytes of 2-1-1-1 Burst SRAM -@@ -244,7 +244,7 @@ - OPERATION_COUNT=20 at configuration time. - - To run tm27 (the interrupt latency timer test), short CN5-48 to CN5-50 on -- the SS555 board. -+ the EC555 board. - - All tests run cleanly, except for tm26, which gives a "PANIC 12" after it - exits. This doesn't seem to cause a problem otherwise. -Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/configure.ac -=================================================================== ---- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/configure.ac 2006-12-02 06:59:47.000000000 +0100 -+++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/configure.ac 2009-11-29 01:47:01.416556469 +0100 -@@ -3,7 +3,7 @@ - ## $Id: configure.ac,v 1.9 2006/12/02 05:59:47 ralf Exp $ - - AC_PREREQ(2.60) --AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla]) -+AC_INIT([rtems-c-src-lib-libbsp-powerpc-ec5xx],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla]) - AC_CONFIG_SRCDIR([bsp_specs]) - RTEMS_TOP(../../../../../..) - -Index: rtems-4.9.3/make/custom/ec555.cfg -=================================================================== ---- rtems-4.9.3.orig/make/custom/ec555.cfg 2009-11-29 01:43:49.127556601 +0100 -+++ rtems-4.9.3/make/custom/ec555.cfg 2009-11-29 01:51:19.435599101 +0100 -@@ -1,5 +1,5 @@ - # --# Config file for an Intec Automation SS555 MPC555-based card -+# Config file for an Wuerz-elektronik EC555 MPC555-based card - # - # This file is derived from: - # -@@ -7,7 +7,7 @@ - # Config file for a PowerPC 403 based helas403 card - # Config file for MPC860 based Ethernet Comm Board - # --# $Id: ss555.cfg,v 1.11 2008/03/11 20:50:58 joel Exp $ -+# $Id: ec555.cfg,v 1.11 2008/03/11 20:50:58 joel Exp $ - # - - include $(RTEMS_ROOT)/make/custom/default.cfg -@@ -17,7 +17,7 @@ - RTEMS_CPU_MODEL=mpc555 - - # This is the actual bsp directory used during the build process. --RTEMS_BSP_FAMILY=ss555 -+RTEMS_BSP_FAMILY=ec555 - - # This contains the compiler options necessary to select the CPU model - # and (hopefully) optimize for it.