+++ /dev/null
-Index: rtems/c/src/lib/libbsp/arm/csb336/console/uart.c
-===================================================================
---- rtems.orig/c/src/lib/libbsp/arm/csb336/console/uart.c
-+++ rtems/c/src/lib/libbsp/arm/csb336/console/uart.c
-@@ -1,262 +1,453 @@
- /*
-- * console driver for MC9328XML UARTs
-+ * Console driver for MC9328XML UARTs.
- *
-- * This driver uses the shared console driver in
-- * ...../libbsp/shared/console.c
-+ * Written Jay Monkman <jtm@lopingdog.com>
-+ * Copyright (c) 2005 by Loping Dog Embedded Systems
- *
-- * If you want the driver to be interrupt driven, you
-- * need to write the ISR, and in the ISR insert the
-- * chars into termios's queue.
-+ * The license and distribution terms for this file may be
-+ * found in the file LICENSE in this distribution or at
-+ * http://www.rtems.com/license
- *
-- * Copyright (c) 2004 Cogent Computer Systems
-- * Written by Jay Monkman <jtm@lopingdog.com>
-- *
-- * The license and distribution terms for this file may be
-- * found in the file LICENSE in this distribution or at
-- *
-- * http://www.OARcorp.com/rtems/license.html.
-- *
-- *
-- * $Id: uart.c,v 1.1 2004/07/15 06:12:05 jtm Exp $
--*/
--#include <bsp.h> /* Must be before libio.h */
-+ * $Id:$
-+ */
-+#include <bsp.h>
- #include <rtems/libio.h>
--#include <termios.h>
-+#include <libchip/sersupp.h>
-+#include <rtems/error.h>
- #include <rtems/bspIo.h>
--
--/* Put the CPU (or UART) specific header file #include here */
-+#include <termios.h>
-+#include <irq.h>
- #include <mc9328mxl.h>
--#include <libchip/serial.h>
--#include <libchip/sersupp.h>
-+
-+
-+/* Define this to use interrupt driver UART driver */
-+#define USE_INTERRUPTS 1
-
- /* How many serial ports? */
- #define NUM_DEVS 2
-+#define poll_write(c) imx_uart_poll_write_char(0, c)
-+#define poll_read() imx_uart_poll_read_char(0)
-
--int uart_poll_read(int minor);
-+static int imx_uart_first_open(int, int, void *);
-+static int imx_uart_last_close(int, int, void *);
-+static int imx_uart_poll_read(int);
-+static int imx_uart_set_attrs(int, const struct termios *);
-+static void imx_uart_init(int minor);
-+static void imx_uart_set_baud(int, int);
-+static int imx_uart_poll_write(int, const char *, int);
-+
-+#if defined(USE_INTERRUPTS)
-+static void imx_uart_tx_isr(rtems_irq_hdl_param);
-+static void imx_uart_rx_isr(rtems_irq_hdl_param);
-+static void imx_uart_isr_on(const rtems_irq_connect_data *irq);
-+static void imx_uart_isr_off(const rtems_irq_connect_data *irq);
-+static int imx_uart_isr_is_on(const rtems_irq_connect_data *irq);
-+static int imx_uart_intr_write(int, const char *, int);
-+#endif
-
--int dbg_dly;
-
--/* static function prototypes */
--static int uart_first_open(int major, int minor, void *arg);
--static int uart_last_close(int major, int minor, void *arg);
--static int uart_read(int minor);
--static int uart_write(int minor, const char *buf, int len);
--static void uart_init(int minor);
--static void uart_write_polled(int minor, char c);
--static int uart_set_attributes(int minor, const struct termios *t);
--
--/* These are used by code in console.c */
--unsigned long Console_Port_Count = NUM_DEVS;
--console_data Console_Port_Data[NUM_DEVS];
--
--/* rtems console uses the following minor number */
--rtems_device_minor_number Console_Port_Minor = 0;
--
--/* Pointers to functions for handling the UART. */
--console_fns uart_fns =
--{
-- libchip_serial_default_probe,
-- uart_first_open,
-- uart_last_close,
-- uart_read,
-- uart_write,
-- uart_init,
-- uart_write_polled, /* not used in this driver */
-- uart_set_attributes,
-- FALSE /* TRUE if interrupt driven, FALSE if not. */
-+
-+/* TERMIOS callbacks */
-+#if defined(USE_INTERRUPTS)
-+rtems_termios_callbacks imx_uart_cbacks = {
-+ .firstOpen = imx_uart_first_open,
-+ .lastClose = imx_uart_last_close,
-+ .pollRead = NULL,
-+ .write = imx_uart_intr_write,
-+ .setAttributes = imx_uart_set_attrs,
-+ .stopRemoteTx = NULL,
-+ .startRemoteTx = NULL,
-+ .outputUsesInterrupts = 1,
-+};
-+#else
-+rtems_termios_callbacks imx_uart_cbacks = {
-+ .firstOpen = imx_uart_first_open,
-+ .lastClose = imx_uart_last_close,
-+ .pollRead = imx_uart_poll_read,
-+ .write = imx_uart_poll_write,
-+ .setAttributes = imx_uart_set_attrs,
-+ .stopRemoteTx = NULL,
-+ .startRemoteTx = NULL,
-+ .outputUsesInterrupts = 0,
- };
-+#endif
-
--/*
-- * There's one item in array for each UART.
-- *
-- * Some of these fields are marked "NOT USED". They are not used
-- * by console.c, but may be used by drivers in libchip
-- *
-- */
--console_tbl Console_Port_Tbl[] = {
-- {
-- "/dev/com0", /* sDeviceName */
-- SERIAL_CUSTOM, /* deviceType */
-- &uart_fns, /* pDeviceFns */
-- NULL, /* deviceProbe */
-- NULL, /* pDeviceFlow */
-- 0, /* ulMargin - NOT USED */
-- 0, /* ulHysteresis - NOT USED */
-- NULL, /* pDeviceParams */
-- 0, /* ulCtrlPort1 - NOT USED */
-- 0, /* ulCtrlPort2 - NOT USED */
-- 0, /* ulDataPort - NOT USED */
-- NULL, /* getRegister - NOT USED */
-- NULL, /* setRegister - NOT USED */
-- NULL, /* getData - NOT USED */
-- NULL, /* setData - NOT USED */
-- 0, /* ulClock - NOT USED */
-- 0 /* ulIntVector - NOT USED */
-- },
-- {
-- "/dev/com1", /* sDeviceName */
-- SERIAL_CUSTOM, /* deviceType */
-- &uart_fns, /* pDeviceFns */
-- NULL, /* deviceProbe */
-- NULL, /* pDeviceFlow */
-- 0, /* ulMargin - NOT USED */
-- 0, /* ulHysteresis - NOT USED */
-- NULL, /* pDeviceParams */
-- 0, /* ulCtrlPort1 - NOT USED */
-- 0, /* ulCtrlPort2 - NOT USED */
-- 0, /* ulDataPort - NOT USED */
-- NULL, /* getRegister - NOT USED */
-- NULL, /* setRegister - NOT USED */
-- NULL, /* getData - NOT USED */
-- NULL, /* setData - NOT USED */
-- 0, /* ulClock - NOT USED */
-- 0 /* ulIntVector - NOT USED */
-+#if defined(USE_INTERRUPTS)
-+static rtems_irq_connect_data imx_uart_tx_isr_data[NUM_DEVS];
-+static rtems_irq_connect_data imx_uart_rx_isr_data[NUM_DEVS];
-+#endif
-+
-+typedef struct {
-+ int minor;
-+ mc9328mxl_uart_regs_t * regs;
-+ volatile const char *buf;
-+ volatile int len;
-+ volatile int idx;
-+ void *tty;
-+} imx_uart_data_t;
-+
-+static imx_uart_data_t imx_uart_data[NUM_DEVS];
-+
-+rtems_device_driver console_initialize(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void *arg
-+)
-+{
-+ rtems_status_code status;
-+ int i;
-+
-+ for (i = 0; i < NUM_DEVS; i++) {
-+ imx_uart_init(i);
- }
--};
-
--/*********************************************************************/
--/* Functions called via termios callbacks (i.e. the ones in uart_fns */
--/*********************************************************************/
--
--/*
-- * This is called the first time each device is opened. If the driver
-- * is interrupt driven, you should enable interrupts here. Otherwise,
-- * it's probably safe to do nothing.
-- *
-- * Since micromonitor already set up the UART, we do nothing.
-- */
--static int uart_first_open(int major, int minor, void *arg)
-+ rtems_termios_initialize();
-+
-+ /* /dev/console and /dev/tty0 are the same */
-+ status = rtems_io_register_name("/dev/console", major, 0);
-+ if (status != RTEMS_SUCCESSFUL) {
-+ rtems_panic("%s:%d Error registering /dev/console :: %d\n",
-+ __FUNCTION__, __LINE__, status);
-+ }
-+
-+ status = rtems_io_register_name("/dev/tty0", major, 0);
-+ if (status != RTEMS_SUCCESSFUL) {
-+ rtems_panic("%s:%d Error registering /dev/tty0 :: %d\n",
-+ __FUNCTION__, __LINE__, status);
-+ }
-+
-+ status = rtems_io_register_name("/dev/tty1", major, 1);
-+ if (status != RTEMS_SUCCESSFUL) {
-+ rtems_panic("%s:%d Error registering /dev/tty1 :: %d\n",
-+ __FUNCTION__, __LINE__, status);
-+ }
-+ return RTEMS_SUCCESSFUL;
-+}
-+
-+rtems_device_driver console_open(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void * arg
-+)
- {
-- return 0;
-+ rtems_status_code rc;
-+
-+ if (minor > (NUM_DEVS - 1)) {
-+ return RTEMS_INVALID_NUMBER;
-+ }
-+
-+ rc = rtems_termios_open(major, minor, arg, &imx_uart_cbacks);
-+
-+ return rc;
- }
-
-+rtems_device_driver console_close(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void * arg
-+)
-+{
-+ return rtems_termios_close(arg);
-+}
-
--/*
-- * This is called the last time each device is closed. If the driver
-- * is interrupt driven, you should disable interrupts here. Otherwise,
-- * it's probably safe to do nothing.
-- */
--static int uart_last_close(int major, int minor, void *arg)
-+rtems_device_driver console_read(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void * arg
-+)
- {
-- return 0;
-+ return rtems_termios_read(arg);
- }
-
-+rtems_device_driver console_write(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void * arg
-+)
-+{
-+ return rtems_termios_write(arg);
-+}
-
--/*
-- * Read one character from UART.
-- *
-- * Return -1 if there's no data, otherwise return
-- * the character in lowest 8 bits of returned int.
-- */
--static int uart_read(int minor)
-+rtems_device_driver console_control(
-+ rtems_device_major_number major,
-+ rtems_device_minor_number minor,
-+ void * arg
-+)
- {
-- char c;
-+ return rtems_termios_ioctl(arg);
-+}
-+
-+static void imx_uart_init(int minor)
-+{
-+ imx_uart_data[minor].minor = minor;
-+ imx_uart_data[minor].buf = NULL;
-+ imx_uart_data[minor].len = 0;
-+ imx_uart_data[minor].idx = 0;
-
- if (minor == 0) {
-- if (MC9328MXL_UART1_SR2 & MC9328MXL_UART_SR2_RDR) {
-- c = MC9328MXL_UART1_RXD & MC9328MXL_UART_RXD_CHARMASK;
-- return c;
-- } else {
-- return -1;
-- }
-+#if defined(USE_INTERRUPTS)
-+ imx_uart_tx_isr_data[minor].name = BSP_INT_UART1_TX;
-+ imx_uart_rx_isr_data[minor].name = BSP_INT_UART1_RX;
-+#endif
-+ imx_uart_data[minor].regs =
-+ (mc9328mxl_uart_regs_t *) MC9328MXL_UART1_BASE;
- } else if (minor == 1) {
-- if (MC9328MXL_UART2_SR2 & MC9328MXL_UART_SR2_RDR) {
-- c = MC9328MXL_UART2_RXD & MC9328MXL_UART_RXD_CHARMASK;
-- return c;
-- } else {
-- return -1;
-- }
-+#if defined(USE_INTERRUPTS)
-+ imx_uart_tx_isr_data[minor].name = BSP_INT_UART2_TX;
-+ imx_uart_rx_isr_data[minor].name = BSP_INT_UART2_RX;
-+#endif
-+ imx_uart_data[minor].regs =
-+ (mc9328mxl_uart_regs_t *) MC9328MXL_UART2_BASE;
- } else {
-- printk("Unknown console minor number: %d\n", minor);
-- return -1;
-+ rtems_panic("%s:%d Unknown UART minor number %d\n",
-+ __FUNCTION__, __LINE__, minor);
- }
-
-+#if defined(USE_INTERRUPTS)
-+ imx_uart_tx_isr_data[minor].hdl = imx_uart_tx_isr;
-+ imx_uart_tx_isr_data[minor].handle = &imx_uart_data[minor];
-+ imx_uart_tx_isr_data[minor].on = imx_uart_isr_on;
-+ imx_uart_tx_isr_data[minor].off = imx_uart_isr_off;
-+ imx_uart_tx_isr_data[minor].isOn = imx_uart_isr_is_on;
-+
-+ imx_uart_rx_isr_data[minor].hdl = imx_uart_rx_isr;
-+ imx_uart_rx_isr_data[minor].handle = &imx_uart_data[minor];
-+ imx_uart_rx_isr_data[minor].on = imx_uart_isr_on;
-+ imx_uart_rx_isr_data[minor].off = imx_uart_isr_off;
-+ imx_uart_rx_isr_data[minor].isOn = imx_uart_isr_is_on;
-+#endif
-+
-+ imx_uart_data[minor].regs->cr1 = (
-+ MC9328MXL_UART_CR1_UARTCLKEN |
-+ MC9328MXL_UART_CR1_UARTEN);
-+
-+ imx_uart_data[minor].regs->cr2 = (
-+ MC9328MXL_UART_CR2_IRTS |
-+ MC9328MXL_UART_CR2_WS |
-+ MC9328MXL_UART_CR2_TXEN |
-+ MC9328MXL_UART_CR2_RXEN |
-+ MC9328MXL_UART_CR2_SRST);
-+
-+ imx_uart_data[minor].regs->cr3 = 0;
-+
-+ imx_uart_data[minor].regs->cr4 = 0;
-+
-+ imx_uart_data[minor].regs->fcr = (
-+ MC9328MXL_UART_FCR_TXTL(32) |
-+ MC9328MXL_UART_FCR_RFDIV_1 |
-+ MC9328MXL_UART_FCR_RXTL(1));
-+
-+ imx_uart_set_baud(minor, 38400);
-+
- }
-
-+static int imx_uart_first_open(int major, int minor, void *arg)
-+{
-+ rtems_libio_open_close_args_t *args = arg;
-
--/*
-- * Write buffer to UART
-- *
-- * return 1 on success, -1 on error
-- */
--static int uart_write(int minor, const char *buf, int len)
-+ imx_uart_data[minor].tty = args->iop->data1;
-+
-+#if defined(USE_INTERRUPTS)
-+ BSP_install_rtems_irq_handler(&imx_uart_tx_isr_data[minor]);
-+ BSP_install_rtems_irq_handler(&imx_uart_rx_isr_data[minor]);
-+
-+ imx_uart_data[minor].regs->cr1 |= MC9328MXL_UART_CR1_RRDYEN;
-+#endif
-+
-+ return 0;
-+}
-+
-+static int imx_uart_last_close(int major, int minor, void *arg)
- {
-- int i;
-+#if defined(USE_INTERRUPTS)
-+ BSP_remove_rtems_irq_handler(&imx_uart_tx_isr_data[minor]);
-+ BSP_remove_rtems_irq_handler(&imx_uart_rx_isr_data[minor]);
-+#endif
-
-- if (minor == 0) {
-- for (i = 0; i < len; i++) {
-- /* Wait for fifo to have room */
-- while(!(MC9328MXL_UART1_SR2 & MC9328MXL_UART_SR2_TXDC)) {
-- continue;
-- }
--
-- MC9328MXL_UART1_TXD = (char) buf[i];
-- }
-- } else if (minor == 1) {
-- for (i = 0; i < len; i++) {
-- /* Wait for fifo to have room */
-- while(!(MC9328MXL_UART2_SR2 & MC9328MXL_UART_SR2_TXDC)) {
-- continue;
-- }
--
-- MC9328MXL_UART2_TXD = (char) buf[i];
-- }
-+ return 0;
-+}
-+
-+static int imx_uart_poll_read(int minor)
-+{
-+ if (imx_uart_data[minor].regs->sr2 & MC9328MXL_UART_SR2_RDR) {
-+ return imx_uart_data[minor].regs->rxd & 0xff;
- } else {
-- printk("Unknown console minor number: %d\n", minor);
- return -1;
- }
--
-- return 1;
- }
-
-
--/* Set up the UART. */
--static void uart_init(int minor)
-+static int imx_uart_poll_write(int minor, const char *buf, int len)
- {
-- /* leave the debug sio port as setup by umon */
-+ int i;
-+ for (i = 0; i < len; i++) {
-+ /* Wait for there to be room in the fifo */
-+ while (!(imx_uart_data[minor].regs->sr2 & MC9328MXL_UART_SR2_TXDC)) {
-+ continue;
-+ }
-+
-+ imx_uart_data[minor].regs->txd = buf[i];
-+ }
-+ return 1;
-+
- }
-
--/* I'm not sure this is needed for the shared console driver. */
--static void uart_write_polled(int minor, char c)
-+#if defined(USE_INTERRUPTS)
-+static int imx_uart_intr_write(int minor, const char *buf, int len)
- {
-- uart_write(minor, &c, 1);
-+ imx_uart_data[minor].buf = buf;
-+ imx_uart_data[minor].len = len;
-+ imx_uart_data[minor].idx = 0;
-+
-+ imx_uart_data[minor].regs->cr1 |= MC9328MXL_UART_CR1_TXMPTYEN;
-+
-+ return 1;
- }
-+#endif
-+
-
- /* This is for setting baud rate, bits, etc. */
--static int uart_set_attributes(int minor, const struct termios *t)
-+static int imx_uart_set_attrs(int minor, const struct termios *t)
- {
-+ int baud;
-+
-+ baud = termios_baud_to_number(t->c_cflag & CBAUD);
-+ imx_uart_set_baud(minor, baud);
-+
- return 0;
- }
-
--/***********************************************************************/
-+#if defined(USE_INTERRUPTS)
-+static void imx_uart_isr_on(const rtems_irq_connect_data *irq)
-+{
-+ MC9328MXL_AITC_INTENNUM = irq->name;
-+}
-+static void imx_uart_isr_off(const rtems_irq_connect_data *irq)
-+{
-+ MC9328MXL_AITC_INTDISNUM = irq->name;
-+}
-+static int imx_uart_isr_is_on(const rtems_irq_connect_data *irq)
-+{
-+ int irq_num = (int)irq->name;
-+ if (irq_num < 32) {
-+ return MC9328MXL_AITC_INTENABLEL & (1 << irq_num);
-+ } else {
-+ return MC9328MXL_AITC_INTENABLEH & (1 << (irq_num - 32));
-+ }
-+}
-+
-+static void imx_uart_rx_isr(rtems_irq_hdl_param param)
-+{
-+ imx_uart_data_t *uart_data = param;
-+ char buf[32];
-+ int i=0;
-+
-+ while (uart_data->regs->sr2 & MC9328MXL_UART_SR2_RDR) {
-+ buf[i] = uart_data->regs->rxd & 0xff;
-+ i++;
-+ }
-+
-+ rtems_termios_enqueue_raw_characters(uart_data->tty, buf, i);
-+}
-+
-+static void imx_uart_tx_isr(rtems_irq_hdl_param param)
-+{
-+ imx_uart_data_t *uart_data = param;
-+ int len;
-+ int minor = uart_data->minor;
-+
-+
-+ if (uart_data->idx < uart_data->len) {
-+ while ( (uart_data->regs->sr1 & MC9328MXL_UART_SR1_TRDY) &&
-+ (uart_data->idx < uart_data->len)) {
-+ uart_data->regs->txd = uart_data->buf[uart_data->idx];
-+ uart_data->idx++;
-+ }
-+ } else {
-+ len = uart_data->len;
-+ uart_data->len = 0;
-+ imx_uart_data[minor].regs->cr1 &= ~MC9328MXL_UART_CR1_TXMPTYEN;
-+ rtems_termios_dequeue_characters(uart_data->tty, len);
-+ }
-+}
-+#endif
-+
- /*
-- * The following functions are not used by TERMIOS, but other RTEMS
-- * functions use them instead.
-+ * Set the UART's baud rate. The calculation is:
-+ * (baud * 16) / ref_freq = num/demom
-+ *
-+ * ref_freq = perclk1 / RFDIV[2:0]
-+ * BIR = num - 1
-+ * BMR = demom - 1
-+ *
-+ * Setting 'num' to 16 yields this equation:
-+ * demom = ref_freq / baud
- */
--/***********************************************************************/
--/*
-- * Read from UART. This is used in the exit code, and can't
-- * rely on interrupts.
--*/
--int uart_poll_read(int minor)
-+static void imx_uart_set_baud(int minor, int baud)
- {
-- return uart_read(minor);
-+ unsigned int perclk1;
-+ unsigned int denom;
-+ unsigned int ref_freq = 0;
-+ uint32_t fcr;
-+
-+ perclk1 = get_perclk1_freq();
-+ fcr = imx_uart_data[minor].regs->fcr;
-+
-+ switch(fcr & MC9328MXL_UART_FCR_RFDIV_MASK) {
-+ case MC9328MXL_UART_FCR_RFDIV_1: ref_freq = perclk1/1; break;
-+ case MC9328MXL_UART_FCR_RFDIV_2: ref_freq = perclk1/2; break;
-+ case MC9328MXL_UART_FCR_RFDIV_3: ref_freq = perclk1/3; break;
-+ case MC9328MXL_UART_FCR_RFDIV_4: ref_freq = perclk1/4; break;
-+ case MC9328MXL_UART_FCR_RFDIV_5: ref_freq = perclk1/5; break;
-+ case MC9328MXL_UART_FCR_RFDIV_6: ref_freq = perclk1/6; break;
-+ case MC9328MXL_UART_FCR_RFDIV_7: ref_freq = perclk1/7; break;
-+ default:
-+ rtems_panic("%s:%d Unknown RFDIV: 0x%x",
-+ __FUNCTION__, __LINE__,
-+ fcr & MC9328MXL_UART_FCR_RFDIV_MASK);
-+ break;
-+ }
-+
-+ denom = ref_freq / baud;
-+
-+ imx_uart_data[minor].regs->bir = 0xf;
-+ imx_uart_data[minor].regs->bmr = denom;
- }
-
-
- /*
-- * Write a character to the console. This is used by printk() and
-- * maybe other low level functions. It should not use interrupts or any
-- * RTEMS system calls. It needs to be very simple
-+ * Polled, non-blocking read from UART
-+ */
-+int imx_uart_poll_read_char(int minor)
-+{
-+ return imx_uart_poll_read(minor);
-+}
-+
-+/*
-+ * Polled, blocking write from UART
- */
--static void _BSP_put_char( char c ) {
-- uart_write_polled(0, c);
-+void imx_uart_poll_write_char(int minor, char c)
-+{
-+ imx_uart_poll_write(minor, &c, 1);
-+}
-+
-+/*
-+ * Functions for printk() and friends.
-+ */
-+void _BSP_output_char(char c)
-+{
-+ poll_write(c);
- if (c == '\n') {
-- uart_write_polled(0, '\r');
-+ poll_write('\r');
- }
- }
-+BSP_output_char_function_type BSP_output_char = _BSP_output_char;
-
--BSP_output_char_function_type BSP_output_char = _BSP_put_char;
-
-+char _BSP_poll_char()
-+{
-+ return poll_read();
-+}
-+BSP_polling_getchar_function_type BSP_poll_char = _BSP_poll_char;
-
-
-Index: rtems/c/src/lib/libbsp/arm/csb336/Makefile.am
-===================================================================
---- rtems.orig/c/src/lib/libbsp/arm/csb336/Makefile.am
-+++ rtems/c/src/lib/libbsp/arm/csb336/Makefile.am
-@@ -35,7 +35,7 @@ startup_rel_CPPFLAGS = $(AM_CPPFLAGS)
- startup_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
- noinst_PROGRAMS += console.rel
--console_rel_SOURCES = console/uart.c ../../shared/console.c
-+console_rel_SOURCES = console/uart.c
- console_rel_CPPFLAGS = $(AM_CPPFLAGS)
- console_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
projects / rtems-devel.git / blobdiff