+++ /dev/null
-Index: rtems/c/src/lib/libbsp/m68k/mo376/start/start.S
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/start/start.S
-+++ rtems/c/src/lib/libbsp/m68k/mo376/start/start.S
-@@ -2,7 +2,7 @@
- * $Id
- */
-
--#include "mrm332.h"
-+#include "mo376.h"
- #include <rtems/asm.h>
- #include <rtems/m68k/sim.h>
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/include/bsp.h
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/include/bsp.h
-+++ rtems/c/src/lib/libbsp/m68k/mo376/include/bsp.h
-@@ -26,7 +26,7 @@ extern "C" {
- #include <rtems/clockdrv.h>
- #include <rtems/console.h>
- #include <rtems/iosupp.h>
--#include <mrm332.h>
-+#include <mo376.h>
- #include <rtems/m68k/sim.h>
- #include <rtems/m68k/qsm.h>
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/ChangeLog
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/ChangeLog
-+++ rtems/c/src/lib/libbsp/m68k/mo376/ChangeLog
-@@ -11,6 +11,11 @@
-
- * include/bsp.h: New header guard.
-
-+2005-04-08 Pavel Pisa <pisa@cmp.felk.cvut.cz>
-+
-+ * MO376 BSP for PiKRON's MO_CPU1/MO_CPU2 board started
-+ as clone of MRM332 BSP.
-+
- 2005-01-07 Ralf Corsepius <ralf.corsepius@rtems.org>
-
- * Makefile.am: Eliminate CFLAGS_OPTIMIZE_V.
-Index: rtems/c/src/lib/libbsp/m68k/mo376/clock/ckinit.c
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/clock/ckinit.c
-+++ rtems/c/src/lib/libbsp/m68k/mo376/clock/ckinit.c
-@@ -20,7 +20,7 @@
- #include <stdlib.h>
- #include <bsp.h>
- #include <rtems/libio.h>
--#include <mrm332.h>
-+#include <mo376.h>
-
- #define CLOCK_VECTOR MRM_PIV
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/configure.ac
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/configure.ac
-+++ rtems/c/src/lib/libbsp/m68k/mo376/configure.ac
-@@ -3,7 +3,7 @@
- ## $Id: configure.ac,v 1.14 2004/09/24 06:32:09 ralf Exp $
-
- AC_PREREQ(2.59)
--AC_INIT([rtems-c-src-lib-libbsp-m68k-mrm332],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-+AC_INIT([rtems-c-src-lib-libbsp-m68k-mo376],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
- AC_CONFIG_SRCDIR([bsp_specs])
- RTEMS_TOP(../../../../../..)
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/README
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/README
-+++ rtems/c/src/lib/libbsp/m68k/mo376/README
-@@ -2,23 +2,24 @@
- # $Id: README,v 1.1 2001/05/25 16:28:46 joel Exp $
- #
-
--Description: mrm332
-+Description: mo376
- ============
--CPU: MC68332 @16 or 25MHz
--RAM: 32k or 512k
--ROM: 512k flash
-+CPU: MC68376 @21MHz
-+RAM: 1MiB or 2MiB
-+ROM: 1MiB or 2MiB flash
-
-- The Mini RoboMind is a small board based on the 68332 microcontroller
--designed and build by Mark Castelluccio. For details, see:
-+ The mo376 BSP supports MO_CPU1/MO_CPU2 boards developed by PiKRON company.
-+The design documentation conforms open-source mind of board authors
-+and can be found on the company pages
-
-- http://www.robominds.com
-+ http://www.pikron.com/en/main_frame_mo_cpu1.html
-
-- This BSP was ported from the efi332 BSP by Matt Cross (profesor@gweep.net),
--the efi332 BSP was written by John S Gwynne.
-+ This BSP has been cloned from Mini RoboMind BSP written for small board based
-+on the 68332 microcontroller designed and build by Mark Castelluccio
-+
-+ The mrm332 BSP was ported from the efi332 BSP by Matt Cross (profesor@gweep.net),
-+the efi332 was written by John S Gwynne.
-
- TODO:
- =====
--- integrate the interrupt driven stdin/stdout into RTEMS to (a) reduce
-- the interrupt priority and (2) to prevent it from blocking.
--- add a timer driver for the tmtest set.
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/Makefile.am
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/Makefile.am
-+++ rtems/c/src/lib/libbsp/m68k/mo376/Makefile.am
-@@ -16,7 +16,7 @@ nodist_include_HEADERS = include/bspopts
- DISTCLEANFILES = include/bspopts.h
- noinst_PROGRAMS =
-
--include_HEADERS += include/mrm332.h
-+include_HEADERS += include/mo376.h
- nodist_include_HEADERS += ../../shared/include/coverhd.h
-
- EXTRA_DIST = times
-Index: rtems/c/src/lib/libbsp/m68k/mo376/console/sci.c
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/console/sci.c
-+++ rtems/c/src/lib/libbsp/m68k/mo376/console/sci.c
-@@ -129,7 +129,7 @@
-
- // system clock definitions, i dont have documentation on this...
-
--#if 0 // Not needed, this is provided in mrm332.h
-+#if 0 // Not needed, this is provided in mo376.h
- #define XTAL 32768.0 // crystal frequency in Hz
- #define NUMB_W 0 // system clock parameters
- #define NUMB_X 1
-@@ -1238,7 +1238,7 @@ static void SciSetBaud(uint32_t rate)
-
- // calculate the register value as a float and convert to an int
- // set baud rate - you must define the system clock constant
-- // see mrm332.h for an example
-+ // see mo376.h for an example
-
- value = ( (uint16_t) ( SYS_CLOCK / rate / 32.0 + 0.5 ) & 0x1fff );
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/startup/start_c.c
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/startup/start_c.c
-+++ rtems/c/src/lib/libbsp/m68k/mo376/startup/start_c.c
-@@ -2,7 +2,7 @@
- * $Id
- */
-
--#include <mrm332.h>
-+#include <mo376.h>
- #include <rtems/m68k/sim.h>
- #define __START_C__
- #include "bsp.h"
-Index: rtems/c/src/lib/libbsp/m68k/mo376/times
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/times
-+++ rtems/c/src/lib/libbsp/m68k/mo376/times
-@@ -1,5 +1,5 @@
- #
--# Timing Test Suite Results for the MRM332 BSP
-+# Timing Test Suite Results for the MO376 BSP
- #
- # $Id: times,v 1.2 2004/01/07 21:13:50 joel Exp $
- #
-@@ -8,9 +8,9 @@ NOTE: This BSP is user submitted and no
-
- TBD: MATT - update this with real times!
-
--Board: MRM332
-+Board: MO376
- CPU: 68332
--Clock Speed: 20 Mhz
-+Clock Speed: 21 Mhz
- Memory Configuration: SRAM, DRAM, cache, etc
- Wait States:
-
-Index: rtems/c/src/lib/libbsp/m68k/mo376/include/mo376.h
-===================================================================
---- /dev/null
-+++ rtems/c/src/lib/libbsp/m68k/mo376/include/mo376.h
-@@ -0,0 +1,70 @@
-+/* mo376.h
-+ *
-+ * $Id: mo376.h,v 1.5 2004/04/21 16:01:35 ralf Exp $
-+ */
-+
-+#ifndef _MO376_H_
-+#define _MO376_H_
-+
-+/* SIM_MM (SIM Module Mapping) determines the location of the control
-+ register block. When MM=0, register addresses range fom 0x7ff000 to
-+ 0x7FFFFF. When MM=1, register addresses range from 0xfff000 to
-+ 0xffffff. */
-+#define SIM_MM 1
-+
-+/* Interrupt related definitions */
-+#define SIM_IARB 15
-+#define QSM_IARB 10
-+
-+#define MRM_PIV 64
-+#define ISRL_PIT 4 /* zero disables PIT */
-+
-+#define EFI_QIVR 66 /* 66=>SCI and 67=>QSPI interrupt */
-+#define ISRL_QSPI 0
-+
-+#define EFI_SPINT 24 /* spurious interrupt */
-+#define EFI_INT1 25 /* CTS interrupt */
-+#define ISRL_SCI 6
-+
-+/* System Clock definitions */
-+#define XTAL 32768.0 /* crystal frequency in Hz */
-+
-+#if 0
-+/* Default MRM clock rate (8.388688 MHz) set by CPU32: */
-+#define MRM_W 0 /* system clock parameters */
-+#define MRM_X 0
-+#define MRM_Y 0x3f
-+#endif
-+
-+#if 1
-+/* 16.77722 MHz: */
-+#define MRM_W 1 /* system clock parameters */
-+#define MRM_X 1
-+#define MRM_Y 0x0f
-+#endif
-+
-+#if 0
-+/* 25.16582 MHz: */
-+#define MRM_W 1 /* system clock parameters */
-+#define MRM_X 1
-+#define MRM_Y 0x17
-+#endif
-+
-+#define SYS_CLOCK (XTAL*4.0*(MRM_Y+1)*(1 << (2*MRM_W+MRM_X)))
-+#define SCI_BAUD 19200 /* RS232 Baud Rate */
-+
-+/* macros/functions */
-+
-+#ifndef ASM
-+
-+/*
-+ * This prototype really should have the noreturn attribute but
-+ * that causes a warning. Not sure how to fix that.
-+ */
-+/* static void reboot(void) __attribute__ ((noreturn)); */
-+static void reboot(void);
-+__inline__ static void reboot() {asm("trap #15; .word 0x0063");}
-+
-+#endif /* ASM */
-+
-+#endif /* _MRM_H_ */
-Index: rtems/c/src/lib/libbsp/m68k/mo376/include/mrm332.h
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/include/mrm332.h
-+++ /dev/null
-@@ -1,70 +0,0 @@
--/* mrm332.h
-- *
-- * $Id: mrm332.h,v 1.5 2004/04/21 16:01:35 ralf Exp $
-- */
--
--#ifndef _MRM332_H_
--#define _MRM332_H_
--
--/* SIM_MM (SIM Module Mapping) determines the location of the control
-- register block. When MM=0, register addresses range fom 0x7ff000 to
-- 0x7FFFFF. When MM=1, register addresses range from 0xfff000 to
-- 0xffffff. */
--#define SIM_MM 1
--
--/* Interrupt related definitions */
--#define SIM_IARB 15
--#define QSM_IARB 10
--
--#define MRM_PIV 64
--#define ISRL_PIT 4 /* zero disables PIT */
--
--#define EFI_QIVR 66 /* 66=>SCI and 67=>QSPI interrupt */
--#define ISRL_QSPI 0
--
--#define EFI_SPINT 24 /* spurious interrupt */
--#define EFI_INT1 25 /* CTS interrupt */
--#define ISRL_SCI 6
--
--/* System Clock definitions */
--#define XTAL 32768.0 /* crystal frequency in Hz */
--
--#if 0
--/* Default MRM clock rate (8.388688 MHz) set by CPU32: */
--#define MRM_W 0 /* system clock parameters */
--#define MRM_X 0
--#define MRM_Y 0x3f
--#endif
--
--#if 1
--/* 16.77722 MHz: */
--#define MRM_W 1 /* system clock parameters */
--#define MRM_X 1
--#define MRM_Y 0x0f
--#endif
--
--#if 0
--/* 25.16582 MHz: */
--#define MRM_W 1 /* system clock parameters */
--#define MRM_X 1
--#define MRM_Y 0x17
--#endif
--
--#define SYS_CLOCK (XTAL*4.0*(MRM_Y+1)*(1 << (2*MRM_W+MRM_X)))
--#define SCI_BAUD 19200 /* RS232 Baud Rate */
--
--/* macros/functions */
--
--#ifndef ASM
--
--/*
-- * This prototype really should have the noreturn attribute but
-- * that causes a warning. Not sure how to fix that.
-- */
--/* static void reboot(void) __attribute__ ((noreturn)); */
--static void reboot(void);
--__inline__ static void reboot() {asm("trap #15; .word 0x0063");}
--
--#endif /* ASM */
--
--#endif /* _MRM_H_ */
-Index: rtems/make/custom/mo376.cfg
-===================================================================
---- rtems.orig/make/custom/mo376.cfg
-+++ rtems/make/custom/mo376.cfg
-@@ -1,7 +1,7 @@
- #
--# Config file for the mrm332 BSP
-+# Config file for the mo376 BSP
- #
--# $Id: mrm332.cfg,v 1.8 2004/02/04 16:50:30 ralf Exp $
-+# $Id: mo376.cfg,v 1.8 2004/02/04 16:50:30 ralf Exp $
- #
-
- include $(RTEMS_ROOT)/make/custom/default.cfg
-@@ -10,7 +10,7 @@ RTEMS_CPU=m68k
- RTEMS_CPU_MODEL=m68332
-
- # This is the actual bsp directory used during the build process.
--RTEMS_BSP_FAMILY=mrm332
-+RTEMS_BSP_FAMILY=mo376
-
- # This contains the compiler options necessary to select the CPU model
- # and (hopefully) optimize for it.
-@@ -26,7 +26,7 @@ CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-point
- ifeq ($(MRM_IN_ROM),yes)
- # Build a rommable image - move the .data section after the .text section
- # in the image.
--CPU_CFLAGS += -qnolinkcmds -T $(exec_prefix)/mrm332/lib/linkcmds_ROM
-+CPU_CFLAGS += -qnolinkcmds -T $(exec_prefix)/mo376/lib/linkcmds_ROM
-
- # This is a good way to get debug information. The output file is large
- # though and greatly slows the build process so only do this if needed.
-Index: rtems/c/src/lib/libbsp/m68k/mo376/preinstall.am
-===================================================================
---- rtems.orig/c/src/lib/libbsp/m68k/mo376/preinstall.am
-+++ rtems/c/src/lib/libbsp/m68k/mo376/preinstall.am
-@@ -44,9 +44,9 @@ $(PROJECT_INCLUDE)/bspopts.h: include/bs
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
- PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
--$(PROJECT_INCLUDE)/mrm332.h: include/mrm332.h $(PROJECT_INCLUDE)/$(dirstamp)
-- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/mrm332.h
--PREINSTALL_FILES += $(PROJECT_INCLUDE)/mrm332.h
-+$(PROJECT_INCLUDE)/mo376.h: include/mo376.h $(PROJECT_INCLUDE)/$(dirstamp)
-+ $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/mo376.h
-+PREINSTALL_FILES += $(PROJECT_INCLUDE)/mo376.h
-
- $(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
- $(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
projects / rtems-devel.git / blobdiff