-Index: rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
+---
+ c/src/lib/libbsp/powerpc/ec555/ChangeLog | 5 +++++
+ c/src/lib/libbsp/powerpc/ec555/README | 18 +++++++++---------
+ c/src/lib/libbsp/powerpc/ec555/configure.ac | 2 +-
+ make/custom/ec555.cfg | 6 +++---
+ 4 files changed, 18 insertions(+), 13 deletions(-)
+
+Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/ChangeLog
===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
+--- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/ChangeLog 2008-12-08 06:15:50.000000000 +0100
++++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/ChangeLog 2009-11-29 01:49:00.499560796 +0100
@@ -1,3 +1,8 @@
-+200
6-06-02 Pavel Pisa <pisa@cmp.felk.cvut.cz>
++200
9-11-27 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+
+ * EC555 BSP for Wuerz-elektronik EC555 board started
+ as clone of SS555 BSP.
+
- 2006-03-08 Joel Sherrill <joel@OARcorp.com>
+ 2008-12-08 Ralf Corsépius <ralf.corsepius@rtems.org>
- * startup/linkcmds: Add .gnu.linkonce.b.* section.
-Index: rtems/c/src/lib/libbsp/powerpc/ec555/README
+ * bsp_specs: Backport from CVS-HEAD.
+Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/README
===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/README
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/README
+--- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/README 2009-11-29 01:38:37.608590025 +0100
++++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/README 2009-11-29 01:47:01.416556469 +0100
@@ -2,9 +2,9 @@
# $Id: README,v 1.1 2004/04/12 21:52:13 joel Exp $
#
Canada - Suffield, and is Copyright (C) 2004, Real-Time Systems Inc.
Please send any comments, improvements, or bug reports to:
-@@ -16,8 +16,8 @@ querbach@realtime.bc.ca
+@@ -16,8 +16,8 @@
Summary
-------
BUS: None
CPU FAMILY: PowerPC
CPU: PowerPC MPC555
-@@ -88,7 +88,7 @@ RAM: 512k 2-1-1-1 burst SRAM
+@@ -88,7 +88,7 @@
Installation
------------
depending on whether or not it is built for debugging by giving the
VARIANT=DEBUG switch to make:
-@@ -112,7 +112,7 @@ Console driver
+@@ -112,7 +112,7 @@
This BSP includes an termios-capable asynchronous serial line driver that
supports SCI1 and SCI2. The RTEMS console is selected at configuration time
SCI2 for the console, since SCI1 has some extra features which may be
desired for application use.
-@@ -123,7 +123,7 @@ The BSP console supports three different
+@@ -123,7 +123,7 @@
3. interrupt-driven I/O with termios support.
The mode of operation of the serial driver is determined at configure time in
0 - polled I/O.
1 - interrupt-driven I/O.
-@@ -208,7 +208,7 @@ from the Debian distribution.
+@@ -208,7 +208,7 @@
Test Configuration
------------------
CPU: Motorola MPC555LFMZP40, mask 1K83H
Clock Speed: Crystal 4.0 MHz, CPU 40.0 MHz
RAM: 512K bytes of 2-1-1-1 Burst SRAM
-@@ -244,7 +244,7 @@ Timing tests:
+@@ -244,7 +244,7 @@
OPERATION_COUNT=20 at configuration time.
To run tm27 (the interrupt latency timer test), short CN5-48 to CN5-50 on
All tests run cleanly, except for tm26, which gives a "PANIC 12" after it
exits. This doesn't seem to cause a problem otherwise.
-Index: rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
+Index: rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/configure.ac
===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
+--- rtems-4.9.3.orig/c/src/lib/libbsp/powerpc/ec555/configure.ac 2006-12-02 06:59:47.000000000 +0100
++++ rtems-4.9.3/c/src/lib/libbsp/powerpc/ec555/configure.ac 2009-11-29 01:47:01.416556469 +0100
@@ -3,7 +3,7 @@
- ## $Id: configure.ac,v 1.7 2006/01/11 04:52:39 ralf Exp $
+ ## $Id: configure.ac,v 1.9 2006/12/02 05:59:47 ralf Exp $
- AC_PREREQ(2.59)
--AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-+AC_INIT([rtems-c-src-lib-libbsp-powerpc-ec5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
+ AC_PREREQ(2.60)
+-AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
++AC_INIT([rtems-c-src-lib-libbsp-powerpc-ec5xx],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
-Index: rtems/make/custom/ec555.cfg
+Index: rtems-4.9.3/make/custom/ec555.cfg
===================================================================
---- rtems/make/custom/ec555.cfg
-+++ rtems/make/custom/ec555.cfg
+--- rtems-4.9.3.orig/make/custom/ec555.cfg 2009-11-29 01:43:49.127556601 +0100
++++ rtems-4.9.3/make/custom/ec555.cfg 2009-11-29 01:51:19.435599101 +0100
@@ -1,5 +1,5 @@
#
-# Config file for an Intec Automation SS555 MPC555-based card
#
# This file is derived from:
#
-@@ -15,7 +15,7 @@ GCC_CPU_MODEL=505
+@@ -7,7 +7,7 @@
+ # Config file for a PowerPC 403 based helas403 card
+ # Config file for MPC860 based Ethernet Comm Board
+ #
+-# $Id: ss555.cfg,v 1.11 2008/03/11 20:50:58 joel Exp $
++# $Id: ec555.cfg,v 1.11 2008/03/11 20:50:58 joel Exp $
+ #
+
+ include $(RTEMS_ROOT)/make/custom/default.cfg
+@@ -17,7 +17,7 @@
RTEMS_CPU_MODEL=mpc555
# This is the actual bsp directory used during the build process.
# This contains the compiler options necessary to select the CPU model
# and (hopefully) optimize for it.
-@@ -34,7 +34,7 @@ CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-f
- CXXFLAGS_OPTIMIZE_V=-O4
-
- define make-exe
-- $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(SS555_LDFLAGS) \
-+ $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(EC555_LDFLAGS) \
- -o $(basename $@)_sym.exe $(LINK_OBJS) $(LINK_LIBS)
- $(NM) -g -n $(basename $@)_sym.exe > $(basename $@).nm
- cp $(basename $@)_sym.exe $(basename $@).exe
projects / rtems-devel.git / blobdiff