+++ /dev/null
-Index: rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
-===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/ChangeLog
-@@ -1,3 +1,8 @@
-+2006-06-02 Pavel Pisa <pisa@cmp.felk.cvut.cz>
-+
-+ * EC555 BSP for Wuerz-elektronik EC555 board started
-+ as clone of SS555 BSP.
-+
- 2006-03-08 Joel Sherrill <joel@OARcorp.com>
-
- * startup/linkcmds: Add .gnu.linkonce.b.* section.
-Index: rtems/c/src/lib/libbsp/powerpc/ec555/README
-===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/README
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/README
-@@ -2,9 +2,9 @@
- # $Id: README,v 1.1 2004/04/12 21:52:13 joel Exp $
- #
-
--This is a README file for the Intec SS555 of RTEMS 4.6.0
-+This is a README file for the Wuerz-elektronik EC555 of RTEMS 4.6.0
-
--The SS555 port was sponsored by Defence Research and Development
-+The EC555 port was sponsored by Defence Research and Development
- Canada - Suffield, and is Copyright (C) 2004, Real-Time Systems Inc.
-
- Please send any comments, improvements, or bug reports to:
-@@ -16,8 +16,8 @@ querbach@realtime.bc.ca
- Summary
- -------
-
--BSP NAME: ss555
--BOARD: Intec Automation Inc. SS555
-+BSP NAME: EC555
-+BOARD: Wuerz-elektronik EC555
- BUS: None
- CPU FAMILY: PowerPC
- CPU: PowerPC MPC555
-@@ -88,7 +88,7 @@ RAM: 512k 2-1-1-1 burst SRAM
- Installation
- ------------
-
--The ss555 port uses the Intec SS555's external RAM in two different ways,
-+The EC555 port uses the Wuerz-elektronik EC555's external RAM in two different ways,
- depending on whether or not it is built for debugging by giving the
- VARIANT=DEBUG switch to make:
-
-@@ -112,7 +112,7 @@ Console driver
-
- This BSP includes an termios-capable asynchronous serial line driver that
- supports SCI1 and SCI2. The RTEMS console is selected at configuration time
--with the CONSOLE_MINOR variable (see .../ss555/configure.ac). We default to
-+with the CONSOLE_MINOR variable (see .../ec555/configure.ac). We default to
- SCI2 for the console, since SCI1 has some extra features which may be
- desired for application use.
-
-@@ -123,7 +123,7 @@ The BSP console supports three different
- 3. interrupt-driven I/O with termios support.
-
- The mode of operation of the serial driver is determined at configure time in
--part by the value of the UARTS_IO_MODE variable (see .../ss555/configure.ac).
-+part by the value of the UARTS_IO_MODE variable (see .../ec555/configure.ac).
-
- 0 - polled I/O.
- 1 - interrupt-driven I/O.
-@@ -208,7 +208,7 @@ from the Debian distribution.
- Test Configuration
- ------------------
-
--Board: Intec SS555 v1.1
-+Board: Wuerz-elektronik EC555 v1.1
- CPU: Motorola MPC555LFMZP40, mask 1K83H
- Clock Speed: Crystal 4.0 MHz, CPU 40.0 MHz
- RAM: 512K bytes of 2-1-1-1 Burst SRAM
-@@ -244,7 +244,7 @@ Timing tests:
- OPERATION_COUNT=20 at configuration time.
-
- To run tm27 (the interrupt latency timer test), short CN5-48 to CN5-50 on
-- the SS555 board.
-+ the EC555 board.
-
- All tests run cleanly, except for tm26, which gives a "PANIC 12" after it
- exits. This doesn't seem to cause a problem otherwise.
-Index: rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
-===================================================================
---- rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
-+++ rtems/c/src/lib/libbsp/powerpc/ec555/configure.ac
-@@ -3,7 +3,7 @@
- ## $Id: configure.ac,v 1.7 2006/01/11 04:52:39 ralf Exp $
-
- AC_PREREQ(2.59)
--AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-+AC_INIT([rtems-c-src-lib-libbsp-powerpc-ec5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
- AC_CONFIG_SRCDIR([bsp_specs])
- RTEMS_TOP(../../../../../..)
-
-Index: rtems/make/custom/ec555.cfg
-===================================================================
---- rtems/make/custom/ec555.cfg
-+++ rtems/make/custom/ec555.cfg
-@@ -1,5 +1,5 @@
- #
--# Config file for an Intec Automation SS555 MPC555-based card
-+# Config file for an Wuerz-elektronik EC555 MPC555-based card
- #
- # This file is derived from:
- #
-@@ -15,7 +15,7 @@ GCC_CPU_MODEL=505
- RTEMS_CPU_MODEL=mpc555
-
- # This is the actual bsp directory used during the build process.
--RTEMS_BSP_FAMILY=ss555
-+RTEMS_BSP_FAMILY=ec555
-
- # This contains the compiler options necessary to select the CPU model
- # and (hopefully) optimize for it.
-@@ -34,7 +34,7 @@ CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-f
- CXXFLAGS_OPTIMIZE_V=-O4
-
- define make-exe
-- $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(SS555_LDFLAGS) \
-+ $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(EC555_LDFLAGS) \
- -o $(basename $@)_sym.exe $(LINK_OBJS) $(LINK_LIBS)
- $(NM) -g -n $(basename $@)_sym.exe > $(basename $@).nm
- cp $(basename $@)_sym.exe $(basename $@).exe