]> rtime.felk.cvut.cz Git - pes-rpp/rpp-test-sw.git/blobdiff - rpp-test-sw/commands/cmd.c
Merge branches 'master' and 'rm48/master'
[pes-rpp/rpp-test-sw.git] / rpp-test-sw / commands / cmd.c
index 16b1996ee0fe03c10ce06abf1abe3011fae35a96..a53e6a2a4462e843b5ba323e71ca18568c763531 100644 (file)
@@ -1,23 +1,15 @@
 /*
- * Copyright (C) 2012-2013 Czech Technical University in Prague
+ * Copyright (C) 2012-2015 Czech Technical University in Prague
  *
  * Created on: 31.7.2012
  *
  * Authors:
  *     - Michal Horn
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * This document contains proprietary information belonging to Czech
+ * Technical University in Prague. Passing on and copying of this
+ * document, and communication of its contents is not permitted
+ * without prior written authorization.
  *
  * File : cmd.c
  *
 #include "cmdproc.h"
 #include "cmd.h"
 #include "cmd_adc.h"
+#include "cmd_can.h"
+#include "cmd_pin.h"
+#include "cmd_port.h"
+
+#ifdef TARGET_TMS570_RPP
 #include "cmd_dac.h"
 #include "cmd_emac.h"
 #include "cmd_fray.h"
-#include "cmd_can.h"
 #include "cmd_din.h"
 #include "cmd_hbr.h"
 #include "cmd_hout.h"
 #include "cmd_lout.h"
 #include "cmd_nc.h"
 #include "cmd_netstats.h"
-#include "cmd_pin.h"
-#include "cmd_port.h"
 #include "cmd_sdram.h"
 #include "cmd_spi.h"
 #include "cmd_vbat.h"
 #include "cmd_motor_example.h"
 #include "cmd_fr_basic_test.h"
+#endif
 
 #ifndef DOCGEN
 
 #include "hal/hal.h"
 
 
-/**
- *  @brief     Sleep the board
- *
- * @param[in]  cmd_io  Pointer to IO stack
- * @param[in]  des             Pointer to command descriptor
- * @param[in]  param   Parameters of command
- * @return     0 when OK or error code
- */
-int cmd_do_sleep(cmd_io_t *cmd_io, const struct cmd_des *des, char *param[])
-{
-       hal_gpio_pin_set_value(PIN_DSC_CANNSTB, 1);
-       hal_gpio_pin_set_value(PIN_DSC_CANEN, 1);
-       hal_gpio_pin_set_value(PIN_DSC_LIN2NSLP, 1);
-       hal_gpio_pin_set_value(PIN_DSC_LIN1NSLP, 1);
-       vTaskDelay(10/portTICK_RATE_MS);
-       hal_gpio_pin_set_value(PIN_DSC_LIN2NSLP, 0);
-       hal_gpio_pin_set_value(PIN_DSC_LIN1NSLP, 0);
-       hal_gpio_pin_set_value(PIN_DSC_CANNSTB, 0);
-       return 0;
-}
-
 #include <version.h>
 
 int cmd_do_version(cmd_io_t *cmd_io, const struct cmd_des *des, char *param[])
@@ -89,21 +63,36 @@ int cmd_do_version(cmd_io_t *cmd_io, const struct cmd_des *des, char *param[])
 /** Root list in which commands are stored */
 cmd_des_t const **cmd_list;
 
+#ifdef TARGET_TMS570_RPP
+int cmd_do_sleep(cmd_io_t *cmd_io, const struct cmd_des *des, char *param[])
+{
+       hal_gpio_pin_set_value(PIN_DSC_CANNSTB, 1);
+       hal_gpio_pin_set_value(PIN_DSC_CANEN, 1);
+       hal_gpio_pin_set_value(PIN_DSC_LIN2NSLP, 1);
+       hal_gpio_pin_set_value(PIN_DSC_LIN1NSLP, 1);
+       vTaskDelay(10/portTICK_RATE_MS);
+       hal_gpio_pin_set_value(PIN_DSC_LIN2NSLP, 0);
+       hal_gpio_pin_set_value(PIN_DSC_LIN1NSLP, 0);
+       hal_gpio_pin_set_value(PIN_DSC_CANNSTB, 0);
+       return 0;
+}
+
 /** Command descriptor for sleep command */
 cmd_des_t const cmd_des_sleep = {
-       0, 0,
-       "sleep","Sleep the board",
-       "### Syntax ###\n"
-       "\n"
-       " sleep\n"
-       "\n"
-       "### Description ###\n"
-       "\n"
-       "This command configures the LIN and CAN peripherals to enter sleep mode\n"
-       "and turn the whole device into sleep mode. External signal on CAN or\n"
-       "LIN will wake the device up.\n",
-       CMD_HANDLER(cmd_do_sleep), (void *)&cmd_list
+               0, 0,
+               "sleep","Sleep the board",
+               "### Syntax ###\n"
+               "\n"
+               " sleep\n"
+               "\n"
+               "### Description ###\n"
+               "\n"
+               "This command configures the LIN and CAN peripherals to enter sleep mode\n"
+               "and turn the whole device into sleep mode. External signal on CAN or\n"
+               "LIN will wake the device up.\n",
+               CMD_HANDLER(cmd_do_sleep), (void *)&cmd_list
 };
+#endif
 
 /** Command descriptor for show help command */
 cmd_des_t const cmd_des_help = {
@@ -150,27 +139,33 @@ cmd_des_t const cmd_des_version = {
 /** @brief Main list of commands */
 cmd_des_t const *cmd_list_main[] = {
        &cmd_des_help,
+#ifdef TARGET_TMS570_RPP
        &cmd_des_sleep,
+#endif
        &cmd_des_version,
        CMD_DES_INCLUDE_SUBLIST(cmd_list_adc),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_can),
+#ifdef TARGET_TMS570_RPP
        CMD_DES_INCLUDE_SUBLIST(cmd_list_dac),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_din),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_emac),
+       CMD_DES_INCLUDE_SUBLIST(cmd_list_fr_basic_test),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_fray),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_hbr),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_hout),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_lin),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_lout),
+       CMD_DES_INCLUDE_SUBLIST(cmd_list_motor_example),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_nc),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_netstats),
+#endif
        CMD_DES_INCLUDE_SUBLIST(cmd_list_pin),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_port),
+#ifdef TARGET_TMS570_RPP
        CMD_DES_INCLUDE_SUBLIST(cmd_list_sdram),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_spi),
        CMD_DES_INCLUDE_SUBLIST(cmd_list_vbat),
-       CMD_DES_INCLUDE_SUBLIST(cmd_list_motor_example),
-       CMD_DES_INCLUDE_SUBLIST(cmd_list_fr_basic_test),
+#endif
        NULL
 };