CXX=powerpc-linux-gnu-g++
AR=powerpc-linux-gnu-ar
LD=powerpc-linux-gnu-ld
+
+## LinCAN installation and use
+
+Driver can be load into kernel directly from build directory.
+Example for pcm3680 PC/104 card
+
+ insmod _compiled/modules/lincan.ko hw=pcm3680 io=0x200 irq=7,11
+
+The board is non-plug and play and that is why all parameters has
+to be specified. Only board hardware type (i.e. hw=pcican-q) and
+zero/automatic I/O address are required (io=0) for PCI and other
+PnP cards. The boar hardware identifiers and corresponding io locations
+are separated by comma in the case of multiple boards used.
+
+The driver can be installed into system
+
+ mkdir /lib/modules/$(uname -r)/extra
+ cp _compiled/modules/lincan.ko /lib/modules/$(uname -r)/extra
+ chown root:root /lib/modules/$(uname -r)/extra/lincan.ko
+ depmod -a
+
+and then load by modprobe
+
+ modprobe lincan hw=pcm3680 io=0x200 irq=7,11
+
+or setup to autoload after boot (configuration style for Debian based system)
+
+ echo "lincan hw=pcm3680 io=0x200 irq=7,11" >/etc/modules
+
+Next line grants CAN driver access to the all regular system users
+included in users group
+
+ echo 'SUBSYSTEM=="can",GROUP="users",MODE="0660"' >/etc/udev/rules.d/10-lincan.rules