X-Git-Url: http://rtime.felk.cvut.cz/gitweb/mcf548x/linux.git/blobdiff_plain/698a4555a5744245272c7d7eea04068a57c18914..db6f0eeb987ccb6db01d0ea318700368c26be7bf:/arch/m68k/include/asm/MCD_dma.h diff --git a/arch/m68k/include/asm/MCD_dma.h b/arch/m68k/include/asm/MCD_dma.h new file mode 100644 index 000000000000..963bf6eade59 --- /dev/null +++ b/arch/m68k/include/asm/MCD_dma.h @@ -0,0 +1,408 @@ +/********************************************************************* + * + * Copyright (C) 2004 Motorola, Inc. + * MOTOROLA, INC. All Rights Reserved. + * You are hereby granted a copyright license to use + * the SOFTWARE so long as this entire notice is + * retained without alteration in any modified and/or redistributed + * versions, and that such modified versions are clearly identified + * as such. No licenses are granted by implication, estoppel or + * otherwise under any patents or trademarks of Motorola, Inc. This + * software is provided on an "AS IS" basis and without warranty. + * + * To the maximum extent permitted by applicable law, MOTOROLA + * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR + * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE + * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY + * ACCOMPANYING WRITTEN MATERIALS. + * + * To the maximum extent permitted by applicable law, IN NO EVENT + * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING + * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS + * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY + * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. + * + * Motorola assumes no responsibility for the maintenance and support + * of this software + ********************************************************************/ + +/* + * File: MCD_dma.h + * Purpose: Main header file for multi-channel DMA API. + * + * Notes: + * + * Modifications: + */ +#ifndef _MCD_API_H +#define _MCD_API_H + +#include + +/* + * Turn Execution Unit tasks ON (#define) or OFF (#undef) + */ +#undef MCD_INCLUDE_EU + +/* + * Number of DMA channels + */ +#define NCHANNELS 16 + +/* + * Total number of variants + */ +#ifdef MCD_INCLUDE_EU +#define NUMOFVARIANTS 6 +#else +#define NUMOFVARIANTS 4 +#endif + +/* + * Define sizes of the various tables + */ +#define TASK_TABLE_SIZE (NCHANNELS*32) +#define VAR_TAB_SIZE (128) +#define CONTEXT_SAVE_SIZE (128) +#define FUNCDESC_TAB_SIZE (256) + +#ifdef MCD_INCLUDE_EU +#define FUNCDESC_TAB_NUM 16 +#else +#define FUNCDESC_TAB_NUM 1 +#endif + + +#ifndef DEFINESONLY + +/* + * Portability typedefs + */ + /* +#ifndef s32 +typedef int s32; +#endif +#ifndef u32 +typedef unsigned int u32; +#endif +#ifndef s16 +typedef short s16; +#endif +#ifndef u16 +typedef unsigned short u16; +#endif +#ifndef s8 +typedef char s8; +#endif +#ifndef u8 +typedef unsigned char u8; +#endif +*/ +/* + * These structures represent the internal registers of the + * multi-channel DMA + */ +struct dmaRegs_s { + u32 taskbar; /* task table base address register */ + u32 currPtr; + u32 endPtr; + u32 varTablePtr; + u16 dma_rsvd0; + u16 ptdControl; /* ptd control */ + u32 intPending; /* interrupt pending register */ + u32 intMask; /* interrupt mask register */ + u16 taskControl[16]; /* task control registers */ + u8 priority[32]; /* priority registers */ + u32 initiatorMux; /* initiator mux control */ + u32 taskSize0; /* task size control register 0. */ + u32 taskSize1; /* task size control register 1. */ + u32 dma_rsvd1; /* reserved */ + u32 dma_rsvd2; /* reserved */ + u32 debugComp1; /* debug comparator 1 */ + u32 debugComp2; /* debug comparator 2 */ + u32 debugControl; /* debug control */ + u32 debugStatus; /* debug status */ + u32 ptdDebug; /* priority task decode debug */ + u32 dma_rsvd3[31]; /* reserved */ +}; +typedef volatile struct dmaRegs_s dmaRegs; + +#endif + +/* + * PTD contrl reg bits + */ +#define PTD_CTL_TSK_PRI 0x8000 +#define PTD_CTL_COMM_PREFETCH 0x0001 + +/* + * Task Control reg bits and field masks + */ +#define TASK_CTL_EN 0x8000 +#define TASK_CTL_VALID 0x4000 +#define TASK_CTL_ALWAYS 0x2000 +#define TASK_CTL_INIT_MASK 0x1f00 +#define TASK_CTL_ASTRT 0x0080 +#define TASK_CTL_HIPRITSKEN 0x0040 +#define TASK_CTL_HLDINITNUM 0x0020 +#define TASK_CTL_ASTSKNUM_MASK 0x000f + +/* + * Priority reg bits and field masks + */ +#define PRIORITY_HLD 0x80 +#define PRIORITY_PRI_MASK 0x07 + +/* + * Debug Control reg bits and field masks + */ +#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 +#define DBG_CTL_AUTO_ARM 0x00008000 +#define DBG_CTL_BREAK 0x00004000 +#define DBG_CTL_COMP1_TYP_MASK 0x00003800 +#define DBG_CTL_COMP2_TYP_MASK 0x00000070 +#define DBG_CTL_EXT_BREAK 0x00000004 +#define DBG_CTL_INT_BREAK 0x00000002 + +/* + * PTD Debug reg selector addresses + * This reg must be written with a value to show the contents of + * one of the desired internal register. + */ +#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ +#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and + have initiators asserted */ + + +/* + * General return values + */ +#define MCD_OK 0 +#define MCD_ERROR -1 +#define MCD_TABLE_UNALIGNED -2 +#define MCD_CHANNEL_INVALID -3 + +/* + * MCD_initDma input flags + */ +#define MCD_RELOC_TASKS 0x00000001 +#define MCD_NO_RELOC_TASKS 0x00000000 +#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */ + +/* + * MCD_dmaStatus Status Values for each channel + */ +#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ +#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ +#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ +#define MCD_PAUSED 4 /* DMA active but it is currently paused */ +#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */ +#define MCD_DONE 6 /* the most recent DMA has completed. */ + + +/* + * MCD_startDma parameter defines + */ + +/* + * Constants for the funcDesc parameter + */ +/* Byte swapping: */ +#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ +#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */ +#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of + each 32-bit data value being DMAed.*/ +#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each + 16-bit half of each 32-bit data value DMAed */ +#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */ +#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ +/* CRCing: */ +#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ +#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ +#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ +#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/ +#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ + +#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) +#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) + +/* + * Constants for the flags parameter + */ +#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ +#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ +#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */ +#define MCD_TT_FLAGS_MASK 0x000000ff +#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) + +#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ +#define MCD_CHAIN_DMA /* TBD */ +#define MCD_EU_DMA /* TBD */ +#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ +#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ + + +/* these flags are valid for MCD_startDma and the chained buffer descriptors */ +#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */ +#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */ +#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */ +#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring + last byte of data in buffer */ +#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum + prior to performing the DMA. */ + +/* Defines for the FEC buffer descriptor control/status word*/ +#define MCD_FEC_BUF_READY 0x8000 +#define MCD_FEC_WRAP 0x2000 +#define MCD_FEC_INTERRUPT 0x1000 +#define MCD_FEC_END_FRAME 0x0800 + + +/* + * Defines for general intuitiveness + */ + +#define MCD_TRUE 1 +#define MCD_FALSE 0 + +/* + * Three different cases for destination and source. + */ +#define MINUS1 -1 +#define ZERO 0 +#define PLUS1 1 + +#ifndef DEFINESONLY + +/* Task Table Entry struct*/ +typedef struct { + u32 TDTstart; /* task descriptor table start */ + u32 TDTend; /* task descriptor table end */ + u32 varTab; /* variable table start */ + u32 FDTandFlags; /* function descriptor table start and flags */ + volatile u32 descAddrAndStatus; + volatile u32 modifiedVarTab; + u32 contextSaveSpace; /* context save space start */ + u32 literalBases; +} TaskTableEntry; + + +/* Chained buffer descriptor */ +typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; +struct MCD_bufDesc_struct { + u32 flags; /* flags describing the DMA */ + u32 csumResult; /* checksum from checksumming performed since last checksum reset */ + s8 *srcAddr; /* the address to move data from */ + s8 *destAddr; /* the address to move data to */ + s8 *lastDestAddr; /* the last address written to */ + u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */ + MCD_bufDesc *next; /* next buffer descriptor in chain */ + u32 info; /* private information about this descriptor; DMA does not affect it */ +}; + +/* Progress Query struct */ +typedef volatile struct MCD_XferProg_struct { + s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */ + s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */ + u32 dmaSize; /* the amount of data transferred for the current buffer */ + MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */ +} MCD_XferProg; + + +/* FEC buffer descriptor */ +typedef volatile struct MCD_bufDescFec_struct { + u16 statCtrl; + u16 length; + u32 dataPointer; +} MCD_bufDescFec; + + +/*************************************************************************/ +/* + * API function Prototypes - see MCD_dmaApi.c for further notes + */ + +/* + * MCD_startDma starts a particular kind of DMA . + */ +int MCD_startDma ( + int channel, /* the channel on which to run the DMA */ + s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */ + s16 srcIncr, /* the amount to increment the source address per transfer */ + s8 *destAddr, /* the address to move data to */ + s16 destIncr, /* the amount to increment the destination address per transfer */ + u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */ + u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ + u32 initiator, /* what device initiates the DMA */ + int priority, /* priority of the DMA */ + u32 flags, /* flags describing the DMA */ + u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */ +); + +/* + * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA + * registers, relocating and creating the appropriate task structures, and + * setting up some global settings + */ +int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); + +/* + * MCD_dmaStatus() returns the status of the DMA on the requested channel. + */ +int MCD_dmaStatus (int channel); + +/* + * MCD_XferProgrQuery() returns progress of DMA on requested channel + */ +int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep); + +/* + * MCD_killDma() halts the DMA on the requested channel, without any + * intention of resuming the DMA. + */ +int MCD_killDma (int channel); + +/* + * MCD_continDma() continues a DMA which as stopped due to encountering an + * unready buffer descriptor. + */ +int MCD_continDma (int channel); + +/* + * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is + * running on that channel). + */ +int MCD_pauseDma (int channel); + +/* + * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is + * running on that channel). + */ +int MCD_resumeDma (int channel); + +/* + * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA + */ +int MCD_csumQuery (int channel, u32 *csum); + +/* + * MCD_getCodeSize provides the packed size required by the microcoded task + * and structures. + */ +int MCD_getCodeSize(void); + +/* + * MCD_getVersion provides a pointer to a version string and returns a + * version number. + */ +int MCD_getVersion(char **longVersion); + +/* macro for setting a location in the variable table */ +#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value + /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, + so I'm avoiding surrounding it with "do {} while(0)" */ + +#endif /* DEFINESONLY */ + +#endif /* _MCD_API_H */