Fam Zheng [Tue, 24 Mar 2015 01:23:49 +0000 (09:23 +0800)]
block: Fix unaligned zero write
If the zero write is not aligned, bdrv_co_do_pwritev will segfault
because of accessing to the NULL qiov passed in by bdrv_co_write_zeroes.
Fix this by allocating a local qiov in bdrv_co_do_pwritev if the request
is not aligned. (In this case the padding iovs are necessary anyway, so
it doesn't hurt.)
Also add a check at the end of bdrv_co_do_pwritev to clear the zero flag
if padding is involved.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1427160230-4489-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The shift operation on nlb gives a 32 bit result if no type cast is
applied. This bug was reported by Coverity.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1426348844-8793-1-git-send-email-sw@weilnetz.de Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Thu, 26 Mar 2015 17:33:35 +0000 (17:33 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and making SCSI adapters IOMMU-friendly.
# gpg: Signature made Thu Mar 26 13:24:05 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
virtio-scsi-dataplane: fix memory leak for VirtIOSCSIVring
misc: fix typos in copyright declaration
exec: avoid possible overwriting of mmaped area in qemu_ram_remap
sparc: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
mips: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
m68k: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
nbd: Fix up comment after commit e140177
vmw_pvscsi: use PCI DMA APIs
megasas: use PCI DMA APIs
cpus: Don't kick un-realized cpus.
i6300esb: Fix signed integer overflow
i6300esb: Correct endiannness
fw_cfg: factor out initialization of FW_CFG_ID (rev. number)
rcu tests: fix compilation on 32-bit ppc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eduardo Otubo [Thu, 26 Mar 2015 15:56:25 +0000 (16:56 +0100)]
seccomp: libseccomp version varying according to arch
Libseccomp dependency was mandating version 2.2.0 on all architectures
and this was causing configure and virt-test to break on non-updates
distros. This patch works-around it and give a more flexible way to
check the version, giving more time for other distros to update
libseccomp version.
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Reported-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Juan Quintela <quintela@redhat.com>
Message-id: 1427385385-30571-1-git-send-email-eduardo.otubo@profitbricks.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As part of commit e325b49a320b493cc5d69e263751ff716dc458fe,
order in which resources are destroyed was changed for fixing
a seg fault. Due to this change, CQ will never get destroyed as
CQ should be destroyed after QP destruction. Seg fault is caused
improper cleanup when connection fails. Fixing cleanup after
connection failure and order in which resources are destroyed
in qemu_rdma_cleanup() routine.
Passing multiple -incoming options used to crash qemu (due to
an invalid state transition incoming->incoming). Instead we now
take the last -incoming option, e.g.:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Maydell [Thu, 26 Mar 2015 13:30:41 +0000 (13:30 +0000)]
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for 2.3 ppc - 2015-03-25
Just a few bug fixes before 2.3 gets released:
- pseries: Firmware update, bugfixes
- remove POWER5+ v0.0 that we incorrectly introduced in 2.3
- Fix -machine usb=no
- Fix -boot once=foo in pseries
- Add NULL pointer check in pseries machine init
# gpg: Signature made Wed Mar 25 21:53:20 2015 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream:
powerpc: fix -machine usb=no for newworld and pseries machines
PPC: pseries: Implement boot once=foo
target-ppc: Remove POWER5+ v0.0 that never existed
spapr: Add missing checks for NULL pointers and report failures
pseries: Update SLOF firmware image to qemu-slof-20150313
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ting Wang [Thu, 26 Mar 2015 07:42:32 +0000 (15:42 +0800)]
virtio-scsi-dataplane: fix memory leak for VirtIOSCSIVring
VirtIOSCSIVring which allocated in virtio_scsi_vring_init
should be free when dataplane has been stopped or failed to start.
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1427355752-25844-1-git-send-email-kathy.wangting@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 26 Mar 2015 12:18:44 +0000 (12:18 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio bugfixes for 2.3
Several bugfixes, nothing stands out especially.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 25 12:42:10 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-net: validate backend queue numbers against bus limitation
virtio-serial: fix virtio config size
acpi: Add missing GCC_FMT_ATTR to local function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Wed, 25 Mar 2015 13:14:56 +0000 (14:14 +0100)]
exec: avoid possible overwriting of mmaped area in qemu_ram_remap
It is not necessary to munmap an area before remapping it with MAP_FIXED;
if the memory region specified by addr and len overlaps pages of any
existing mapping, then the overlapped part of the existing mapping will
be discarded.
On the other hand, if QEMU does munmap the pages, there is a small
probability that another mmap sneaks in and catches the just-freed
portion of the address space. In effect, munmap followed by
mmap(MAP_FIXED) is a use-after-free error, and Coverity flags it
as such. Fix it.
Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target-ppc: Remove POWER5+ v0.0 that never existed
IBM uses low 16bits to specify the chip version of a POWER CPU.
So there has never been an actual silicon with PVR = 0x003B0000.
The first silicon would have PVR 0x003B0100 but it is very unlikely
to find it in any machine shipped to any customer as it was too raw.
This removes CPU_POWERPC_POWER5P_v00 definition and changes
POWER5+ and POWERgs aliases (which are synonyms) to point to
POWER5+_v2.1 which can still be found in real machines.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: fix commit message] Signed-off-by: Alexander Graf <agraf@suse.de>
Stefan Weil [Sat, 14 Mar 2015 15:29:09 +0000 (16:29 +0100)]
spapr: Add missing checks for NULL pointers and report failures
This fixes potential runtime crashes and two warnings from Coverity.
The new error message does not add a prefix "qemu:" because that is
already done in function hw_error. It also starts with an uppercase
letter because that seems to be the mostly used form.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
[agraf: fix typo] Signed-off-by: Alexander Graf <agraf@suse.de>
pseries: Update SLOF firmware image to qemu-slof-20150313
The changelog is:
> virtio: Fix vring allocation
> helpers: Fix SLOF_alloc_mem_aligned to meet callers expectation
> Set default palette according to "16-color Text Extension" document
> Fix rectangle drawing functions to work also with higher bit depths
> Fix the x86emu patch file
> Silence compiler warning when building the biosemu
> Use device-type Forth word to set up the corresponding property
> Improve /openprom node
> pci-properties: Remove redundant call to device-type
> cas: reconfigure memory nodes
> pci: use 64bit bar ranges
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
Dirk Müller [Tue, 24 Mar 2015 21:30:13 +0000 (22:30 +0100)]
sparc: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-Id: <CAL5wTH7o8uA59Ep0n41i0M19VFWa73n9m172j2W3fjz6=PSVBA@mail.gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirk Müller [Tue, 24 Mar 2015 21:28:15 +0000 (22:28 +0100)]
mips: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-Id: <CAL5wTH4-=HJUvwBu+2o6jGanJesJOyNf3sL8-5+d_-6C3cWBfA@mail.gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirk Müller [Tue, 24 Mar 2015 22:11:03 +0000 (23:11 +0100)]
m68k: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-Id: <CAL5wTH6X-GsT1AA8kEtP_e7oZWGZgi=fCcDfSs3wLgJN30DbUw@mail.gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jason Wang [Fri, 20 Mar 2015 06:07:50 +0000 (14:07 +0800)]
virtio-net: validate backend queue numbers against bus limitation
We don't validate the backend queue numbers against bus limitation,
this will easily crash qemu if it exceeds the limitation which will
hit the abort() in virtio_del_queue(). An example is trying to
starting a virtio-net device with 256 queues. E.g:
Fixing this by doing the validation and fail early.
Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
changes virtio_console_config size from 8 to 12 bytes:
it adds an optional 4 byte emerg_wr field.
As this crosses a power of two boundary, this changes the PCI BAR size,
which breaks migration compatibility with old qemu machine types.
It's probably a problem for other transports as well.
As a temporary fix, as we don't yet support this new field anyway,
simply make the config size smaller at init time.
Long terms we probably want something along the lines
of virtio_net_set_config_size.
Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Cole Robinson <crobinso@redhat.com>
Stefan Weil [Fri, 20 Mar 2015 17:11:58 +0000 (18:11 +0100)]
acpi: Add missing GCC_FMT_ATTR to local function
This fixes these gcc warnings (not enabled in default build):
hw/acpi/aml-build.c:83:5: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
hw/acpi/aml-build.c:88:5: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1427271528-11624-1-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 23 Mar 2015 16:28:13 +0000 (17:28 +0100)]
vmw_pvscsi: use PCI DMA APIs
It is wrong to use address_space_memory directly, because there could be an
IOMMU in the middle. Passing the entire PVSCSIRingInfo to RS_GET_FIELD
and RS_SET_FIELD makes it easy to go back to the PVSCSIState.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
following a464982499b2f637f6699e3d03e0a9d2e0b5288b, it's now possible for
there to be attempts to take the BQL before CPUs have been realized in
cases where a machine model inits peripherals before the first CPU.
BQL lock aquisition kicks the first_cpu, leading to a segfault if this
happens pre-realize. Guard the CPU kick routine to perform no action for
a CPU that doesn't exist or doesn't have a thread yet.
There was a fix to this with commit 6b49809c597331803ea941eadda813e5bb4e8fe2, but the check there misses
the case where the CPU has been inited and not realized. Strengthen the
check to make sure that the first_cpu has a thread (i.e. it is
realized) before allowing the kick.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1427107689-6946-1-git-send-email-peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Mon, 23 Mar 2015 01:51:48 +0000 (12:51 +1100)]
i6300esb: Fix signed integer overflow
If the guest programs a sufficiently large timeout value an integer
overflow can occur in i6300esb_restart_timer(). e.g. if the maximum
possible timer preload value of 0xfffff is programmed then we end up with
the calculation:
Obviously the division by 33MHz brings it back under 64-bits, but the
overflow has already occurred.
Since signed integer overflow has undefined behaviour in C, in theory this
could be arbitrarily bad. In practice, the overflowed value wraps around
to something negative, causing the watchdog to immediately expire, killing
the guest, which is still fairly bad.
The bug can be triggered by running a Linux guest, loading the i6300esb
driver with parameter "heartbeat=2046" and opening /dev/watchdog. The
watchdog will trigger as soon as the device is opened.
This patch corrects the problem by using muldiv64(), which effectively
allows a 128-bit intermediate value between the multiplication and
division.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1427075508-12099-3-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Mon, 23 Mar 2015 01:51:47 +0000 (12:51 +1100)]
i6300esb: Correct endiannness
The IO operations for the i6300esb watchdog timer are marked as
DEVICE_NATIVE_ENDIAN. This is not correct, and - as a PCI device - should
be DEVICE_LITTLE_ENDIAN.
This allows i6300esb to work on ppc targets (yes, using an Intel ICH
derived device on ppc is a bit odd, but the driver exists on the guest
and there's no more obviously suitable watchdog device).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1427075508-12099-2-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gabriel L. Somlo [Thu, 19 Mar 2015 18:20:44 +0000 (14:20 -0400)]
fw_cfg: factor out initialization of FW_CFG_ID (rev. number)
The fw_cfg documentation says this of the revision key (0x0001, FW_CFG_ID):
> A 32-bit little-endian unsigned int, this item is used as an interface
> revision number, and is currently set to 1 by all QEMU architectures
> which expose a fw_cfg device.
arm/virt doesn't. It could be argued that that's an error in
"hw/arm/virt.c"; on the other hand, all of the other fw_cfg providing
boards set the interface version to 1 manually, despite the device
coming from the same, shared implementation. Therefore, instead of
adding
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
to arm/virt, consolidate all such existing calls in the fw_cfg
initialization code.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-Id: <1426789244-26318-1-git-send-email-somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 21 Mar 2015 15:32:05 +0000 (16:32 +0100)]
rcu tests: fix compilation on 32-bit ppc
32-bit PPC cannot do atomic operations on long long. Inside the loops,
we are already using local counters that are summed at the end of
the run---with some exceptions (rcu_stress_count for rcutorture,
n_nodes for test-rcu-list): fix them to use the same technique.
For test-rcu-list, remove the mostly unused member "val" from the
list. Then, use a mutex to protect the global counts.
Performance does not matter there because every thread will only enter
the critical section once.
Remaining uses of atomic instructions are for ints or pointers.
Reported-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 24 Mar 2015 09:52:19 +0000 (09:52 +0000)]
Merge remote-tracking branch 'remotes/bkoppelmann/tags/pull-tricore-20150324' into staging
TriCore bugfixes for 2.3-rc1
# gpg: Signature made Tue Mar 24 08:48:33 2015 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
* remotes/bkoppelmann/tags/pull-tricore-20150324:
target-tricore: properly fix dvinit_b/h_13
target-tricore: fix RRPW_DEXTR using wrong reg
target-tricore: fix DVINIT_HU/BU calculating overflow before result
target-tricore: Fix two helper functions (clang warnings)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TriCore documentation was wrong on how to calculate ovf bits for those two
instructions, which I confirmed with real hardware (TC1796 chip). An ovf
actually happens, if the result (without remainder) does not fit into 8/16 bits.
RRPW_DEXTR used r1 for the low part and r2 for the high part. It should be the
other way round. This also fixes that the result of the first shift was not
saved in a temp and could overwrite registers that were needed for the second
shift.
Stefan Weil [Sat, 7 Mar 2015 14:43:32 +0000 (15:43 +0100)]
target-tricore: Fix two helper functions (clang warnings)
clang report:
target-tricore/op_helper.c:1247:24: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
target-tricore/op_helper.c:1248:25: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
target-tricore/op_helper.c:1249:19: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
target-tricore/op_helper.c:1297:24: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
target-tricore/op_helper.c:1298:25: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
target-tricore/op_helper.c:1299:19: warning:
taking the absolute value of unsigned type 'uint32_t' (aka 'unsigned int')
has no effect [-Wabsolute-value]
Fix also the divisor which was taken from the wrong register
(thanks to Peter Maydell for this hint).
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1425739412-8144-1-git-send-email-sw@weilnetz.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
John Snow [Fri, 20 Mar 2015 00:24:16 +0000 (20:24 -0400)]
ahci-test: improve rw buffer patterns
My pattern was cyclical every 256 bytes, so it missed a fairly obvious
failure case. Add some rand() pepper into the test pattern, and for large
patterns that exceed 256 sectors, start writing an ID per-sector so that
we never generate identical sector patterns.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-5-git-send-email-jsnow@redhat.com
John Snow [Fri, 20 Mar 2015 00:24:15 +0000 (20:24 -0400)]
ahci: Fix sglist offset manipulation for BE machines
This does not bother DMA, because DMA generally transfers
the entire SGList in one shot if it can.
PIO, on the other hand, tries to transfer just one sector
at a time, and will make multiple visits to the sglist
to fetch memory addresses.
Fix the memory address calculaton when we have an offset
by moving the offset addition OUTSIDE of the le64_to_cpu
calculation.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-4-git-send-email-jsnow@redhat.com
John Snow [Fri, 20 Mar 2015 00:24:14 +0000 (20:24 -0400)]
ide: fix cmd_read_pio when nsectors > 1
Similar to the cmd_write_pio fix, update the nsector count and
ide sector before we invoke ide_transfer_start.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-3-git-send-email-jsnow@redhat.com
John Snow [Fri, 20 Mar 2015 00:24:13 +0000 (20:24 -0400)]
ide: fix cmd_write_pio when nsectors > 1
We need to adjust the sector being written to
prior to calling ide_transfer_start, otherwise
we'll write to the same sector again.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1426811056-2202-2-git-send-email-jsnow@redhat.com
Peter Maydell [Mon, 23 Mar 2015 15:11:29 +0000 (15:11 +0000)]
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20150323' into staging
linux-user patches for 2.3-rc1
# gpg: Signature made Mon Mar 23 13:51:56 2015 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20150323:
linux-user: fix broken cpu_copy()
linux-user: fix emulation of splice syscall
linux-user/main.c: Remove redundant end_exclusive() in arm_kernel_cmpxchg64_helper()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andreas Schwab [Tue, 10 Mar 2015 16:11:35 +0000 (17:11 +0100)]
linux-user: fix emulation of splice syscall
The second and fourth argument are in/out parameters, store them back
after the syscall. Also, the fourth argument was mishandled, and EFAULT
handling was missing.
Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Chen Gang S [Sun, 25 Jan 2015 11:03:29 +0000 (19:03 +0800)]
linux-user/main.c: Remove redundant end_exclusive() in arm_kernel_cmpxchg64_helper()
start/end_exclusive() need be pairs, except the start_exclusive() in
stop_all_tasks() which is only used by force_sig(), which will be abort.
So at present, start_exclusive() in stop_all_task() need not be paired.
queue_signal() may call force_sig(), or return after kill pid (or queue
signal). If could return from queue_signal(), stop_all_task() would not
be called in time, the next end_exclusive() would be issue.
So in arm_kernel_cmpxchg64_helper() for ARM, need remove end_exclusive()
after queue_signal(). The related commit: "97cc756 linux-user: Implement
new ARM 64 bit cmpxchg kernel helper".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Peter Maydell [Fri, 20 Mar 2015 12:26:09 +0000 (12:26 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue 2015-03-19
# gpg: Signature made Thu Mar 19 19:40:17 2015 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Haswell-noTSX and Broadwell-noTSX
Revert "target-i386: Disable HLE and RTM on Haswell & Broadwell"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 20 Mar 2015 10:37:03 +0000 (10:37 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/work/numa-verify-cpus-pull-request' into staging
NUMA queue 2015-03-19
# gpg: Signature made Thu Mar 19 19:25:53 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found
* remotes/ehabkost/tags/work/numa-verify-cpus-pull-request:
numa: Print warning if no node is assigned to a CPU
pc: fix default VCPU to NUMA node mapping
numa: introduce machine callback for VCPU to node mapping
numa: Reject configuration if CPU appears on multiple nodes
numa: Reject CPU indexes > max_cpus
numa: Fix off-by-one error at MAX_CPUMASK_BITS check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gonglei [Wed, 18 Mar 2015 09:33:47 +0000 (17:33 +0800)]
ehci: fix segfault when hot-unplugging ehci controller
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Gonglei [Wed, 18 Mar 2015 09:33:48 +0000 (17:33 +0800)]
ohci: fix resource cleanup leak
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Ohci does't support hotplugging/hotunplugging yet, but
existing resource cleanup leak logic likes ehci/uhci.
Gonglei [Wed, 18 Mar 2015 09:33:46 +0000 (17:33 +0800)]
uhci: fix segfault when hot-unplugging uhci controller
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Eduardo Habkost [Fri, 13 Mar 2015 18:58:09 +0000 (15:58 -0300)]
target-i386: Haswell-noTSX and Broadwell-noTSX
With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.
So, to cover both cases, introduce Haswell-noTSX and Broadwell-noTSX CPU
models, for hosts that have Haswell and Broadwell CPUs without TSX support.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With the Intel microcode update that removed HLE and RTM, there will be
different kinds of Haswell and Broadwell CPUs out there: some that still
have the HLE and RTM features, and some that don't have the HLE and RTM
features. On both cases people may be willing to use the pc-*-2.3
machine-types.
So instead of making the CPU model results confusing by making it depend
on the machine-type, keep HLE and RTM on the existing Haswell and
Broadwell CPU models. The plan is to introduce "Haswell-noTSX" and
"Broadwell-noTSX" CPU models later, for people who have CPUs that don't
have TSX feature available.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Mon, 9 Feb 2015 19:35:04 +0000 (17:35 -0200)]
numa: Print warning if no node is assigned to a CPU
We need all possible CPUs (including hotplug ones) to be present in the
SRAT when QEMU starts. QEMU already does that correctly today, the only
problem is that when a CPU is omitted from the NUMA configuration, it is
silently assigned to node 0.
Check if all CPUs up to max_cpus are present in the NUMA configuration
and warn about missing CPUs.
Make it just a warning, to allow management software to be updated if
necessary. In the future we may make it a fatal error instead.
$ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0
qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 1 2 3
qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config
$ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0-2
qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 3
qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
---
v1 -> v2: (no changes)
v2 -> v3:
* Use enumerate_cpus() and error_report() for error message
* Simplify logic using bitmap_full()
v3 -> v4:
* Clarify error message, mention that all CPUs up to
maxcpus need to be described in NUMA config
v4 -> v5:
* Commit log update, to make problem description clearer
Igor Mammedov [Thu, 19 Mar 2015 17:09:22 +0000 (17:09 +0000)]
pc: fix default VCPU to NUMA node mapping
Since commit dd0247e0 pc: acpi: mark all possible CPUs as enabled in SRAT
Linux kernel actually tries to use CPU to Node mapping from
QEMU provided SRAT table instead of discarding it, and that
in some cases breaks build_sched_domains() which expects
sane mapping where cores/threads belonging to the same socket
are on the same NUMA node.
With current default round-robin mapping of VCPUs to nodes
guest ends-up with cores/threads belonging to the same socket
being on different NUMA nodes.
2.6.32 based kernels will hang on boot due to incorrectly built
sched_group-s list in update_sd_lb_stats()
Replacing default mapping with a manual, where VCPUs belonging to
the same socket are on the same NUMA node, fixes the issue for
guests which can't handle nonsense topology i.e. changing CLI to:
-numa node,nodeid=0,cpus=0-3 -numa node,nodeid=1,cpus=4-7
So instead of simply scattering VCPUs around nodes, provide
callback to map the same socket VCPUs to the same NUMA node,
which is what guests would expect from a sane hardware/BIOS.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Thu, 19 Mar 2015 17:09:21 +0000 (17:09 +0000)]
numa: introduce machine callback for VCPU to node mapping
Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.
Allow a machine to override default mapping by providing
MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Thu, 19 Mar 2015 17:47:08 +0000 (17:47 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3.0-rc1
# gpg: Signature made Thu Mar 19 15:03:26 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
block: Fix blockdev-backup not to use funky error class
raw-posix: Deprecate aio=threads fallback without O_DIRECT
raw-posix: Deprecate host floppy passthrough
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Mar 2015 16:46:32 +0000 (16:46 +0000)]
Merge remote-tracking branch 'remotes/amit/tags/vser-for-2.3-3' into staging
virtio-serial api: guest_writable callback for users
# gpg: Signature made Thu Mar 19 12:06:55 2015 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit/tags/vser-for-2.3-3:
virtio: serial: expose a 'guest_writable' callback for users
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
block: Fix blockdev-backup not to use funky error class
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit b7b9d39..7c6a4ab added uses of ERROR_CLASS_DEVICE_NOT_FOUND. Replace
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Thu, 19 Mar 2015 13:04:07 +0000 (13:04 +0000)]
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150318' into staging
MIPS patches 2015-03-18
Changes:
* bug fixes
# gpg: Signature made Wed Mar 18 10:06:00 2015 GMT using RSA key ID 0B29DA6B
# gpg: Can't check signature: public key not found
* remotes/lalrae/tags/mips-20150318:
target-mips: save cpu state before calling MSA load and store helpers
target-mips: fix hflags modified in delay / forbidden slot
target-mips: fix CP0.BadVAddr by stopping translation on Address Error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Mar 2015 12:12:21 +0000 (12:12 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20150318-1' into staging
vnc: fix websockets & QMP.
# gpg: Signature made Wed Mar 18 13:12:35 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vnc-20150318-1:
ui: ensure VNC websockets server checks the ACL if requested
ui: remove separate gnutls_session for websockets server
ui: enforce TLS when using websockets server
ui: fix setup of VNC websockets auth scheme with TLS
ui: split setup of VNC auth scheme into separate method
ui: report error if user requests VNC option that is unsupported
ui: replace printf() calls with VNC_DEBUG
ui: remove unused 'wiremode' variable in VncState struct
vnc: Fix QMP change not to use funky error class
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Amit Shah [Thu, 17 Jul 2014 14:32:45 +0000 (20:02 +0530)]
virtio: serial: expose a 'guest_writable' callback for users
Users of virtio-serial may want to know when a port becomes writable. A
port can stop accepting writes if the guest port is open but not being
read from. In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.
When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
Kevin Wolf [Tue, 17 Mar 2015 12:45:21 +0000 (13:45 +0100)]
raw-posix: Deprecate aio=threads fallback without O_DIRECT
Currently, if the user requests aio=native, but forgets to choose a
cache mode that sets O_DIRECT, that request is silently ignored and raw
falls back to aio=threads.
Deprecate that behaviour so we can make it an error in future qemu
versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Thu, 19 Mar 2015 11:12:21 +0000 (11:12 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, virtio bugfixes for 2.3
Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 18 12:31:03 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pcie_aer: fix comment to match pcie spec
pci: fix several trivial typos in comment
aer: fix a wrong init PCI_ERR_COR_STATUS w1cmask type register
pcie_aer: fix typos in pcie_aer_inject_error comment
aer: fix wrong check on expose aer tlp prefix log
pcie: correct mistaken register bit for End-End TLP Prefix Blocking
virtio: Fix memory leaks reported by Coverity
virtio: validate the existence of handle_output before calling it
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015. Okay, I see we got a few weirdos in the
audience. That's okay, weirdos are welcome here.
Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.
Deprecate block driver host_floppy now, so we can drop it after a
grace period.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Thu, 19 Mar 2015 10:07:23 +0000 (10:07 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- kvm: ioeventfd fix for PPC64LE
- virtio-scsi: misc fixes
- fix for --enable-profiler
- nbd: fixes from Max
- build: fix for scripts/make_device_config.sh
- exec: fix for address_space_translate
# gpg: Signature made Wed Mar 18 11:11:08 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: Respect as_tranlsate_internal length clamp
virtio-scsi-dataplane: fix memory leak in virtio_scsi_vring_init
profiler: Reenable built-in profiler
kvm: fix ioeventfd endianness on bi-endian architectures
virtio-scsi: Fix assert in virtio_scsi_push_event
build: pass .d file name to scripts/make_device_config.sh, fix makefile target
coroutine-io: Return -errno in case of error
nbd: Drop unexpected data for NBD_OPT_LIST
nbd: Fix interpretation of the export flags
nbd: Fix nbd_receive_options()
nbd: Set block size to BDRV_SECTOR_SIZE
nbd: Fix potential signed overflow issues
qemu-nbd: fork() can fail
nbd: Handle blk_getlength() failure
nbd: Pass return value from nbd_handle_list()
nbd: Fix nbd_establish_connection()'s return value
qemu-nbd: Detect unused partitions by system == 0
util/uri: Add overflow check to rfc3986_parse_port
nbd: Fix overflow return value
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Weil [Sat, 14 Mar 2015 08:37:08 +0000 (09:37 +0100)]
elf-loader: Fix truncation warning from coverity
Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.
Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paulo Vital [Tue, 10 Mar 2015 11:25:51 +0000 (12:25 +0100)]
pc-dimm: Add description for device list.
The pc-dimm option presented on device list (by argument "-device \?")
is the unique option that don't have any information about it. This
patch adds a description for the pc-dimm device to help users to
identify it.
Signed-off-by: Paulo Vital <paulo.vital@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Thu, 12 Mar 2015 06:13:45 +0000 (09:13 +0300)]
configure: enable kvm on x32
Here's a trivial change to enable kvm on x32 architecture.
I'm not 100% sure the result works correctly in all cases,
but this is a good start and in theory everything should
work.
Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
zhanghailiang [Wed, 4 Mar 2015 10:25:54 +0000 (18:25 +0800)]
error: Replace error_report() & error_free() with error_report_err()
This is a continuation of the work started in commit 565f65d27:
"error: Use error_report_err() where appropriate"
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Gonglei [Thu, 5 Mar 2015 02:58:32 +0000 (10:58 +0800)]
arm: fix memory leak
Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qmp: Drop unused .user_print from command definitions
.user_print isn't used with QMP commands, only with HMP commands.
Copied over when QMP got its own command table in commit 82a56f0.
Most of them have been dropped since, but a few stragglers remain.
Drop them.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command handler is a union of two function types. If
cmd->user_print is set, handle_user_command() calls
cmd->mhandler.cmd_new(), else cmd->mhandler.cmd().
Command definitions must therefore either set both user_print() and
mhandler.cmd_new(), or only mhandler.cmd().
quit's sets user_print and mhandler.cmd(). handle_user_command()
calls hmp_quit() through mhandler.cmd_new() rather than
mhandler.cmd(), i.e. through a function pointer with a different type.
Broken in commit 7a7f325, v1.0.
Works in practice because hmp_quit() doesn't use its arguments, and
handle_user_command() ignores its function value.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
projects / lisovros / qemu_apohw.git / log